Database Develop

Tilt - Autocomplete Has Stopped Working

Greetings,
I recently updated the stock AT&T ROM, and am a user of KaiserTweak.
Following my update to the new stock Tilt ROM, I no longer get autocomplete either when typing out a message OR (and this is the annoying part) when I want to send an email. Previously, I could enter the first letter and all of the entried beginning with that letter would come up.
Can any kind soul please let me know how I might be able to restore this? My current KaiserTweak autosuggest is set at 6. Of course, I am getting 0.
Thanks!

I recently had this problem with mine using Kaiser Tweak... Turn off XT9 in Kaiser Tweak if you have it enabled and then soft reset and it should work fine. This is what i did and my auto complete came back on no problems. If that doesnt work then I have no idea what it could be. Im still a noob.

SOLVED
That was it. XT9 is a 'advised' setting too ... YIKES.

well i didnt update the new att rom, nor do i use kaiser tweak. i just have stock everything & mysteriously my auto complete stopped working. well its not that it doesnt work, but there is a 15 second lag or something on it. and when it does work it pisses me off bcuz i'll click on the item i wanted to auto complete & it doesnt go away (bcuz the lag) so i'll click it & start typing the next word & it keeps adding the auto complete entry!
i've tried soft reseting, tried, cutting the phone off, and i've noticed i've just got a huge lag on the whole phone w/in the last hour or hour & a half. i cut the phone off & removed my sim & then started it back up & there is no lag whatsoever. could it be something that ATT is doing on their networks or something? pissing me off bad tho...bcuz i've been finding little POS problems day after day w/ this phone and when you spend that damn much money on one, you figure that you wont have to worry about all these little problems...and they add up to amount to one pissed off customer. hell if att had something else w/ wm6 & office & wifi, i'd be using it now instead of feeling like im getting shafted by purchasing this POS.

I understand that your phone is behaving in a way that you do not like. It is either:
1. a bad phone - take it back
2. it is behaving correctly and you do not understand it - in that case indicate here AFTER SEARCHING what your problems are and I am pretty sure that you can get them solved.
3. you have hosed something up - again AFTER SEARCHING ask and you shall receive.
As a newbie myself I have found this a wonderful wealth of knowledge. HOWEVER - if you do not TRY and helpyourself - put on your asbestos suit.
Now - it is entirely possible that you have purchaseda high maintenance phone that has lots of power that you do not need and should not have because it will take more than you want to invest in it.
Your decision.
(BUT - I would quit griping here because you will get VERY LITTLE sympathy.)
Bill
stanGib said:
well i didnt update the new att rom, nor do i use kaiser tweak. i just have stock everything & mysteriously my auto complete stopped working. well its not that it doesnt work, but there is a 15 second lag or something on it. and when it does work it pisses me off bcuz i'll click on the item i wanted to auto complete & it doesnt go away (bcuz the lag) so i'll click it & start typing the next word & it keeps adding the auto complete entry!
i've tried soft reseting, tried, cutting the phone off, and i've noticed i've just got a huge lag on the whole phone w/in the last hour or hour & a half. i cut the phone off & removed my sim & then started it back up & there is no lag whatsoever. could it be something that ATT is doing on their networks or something? pissing me off bad tho...bcuz i've been finding little POS problems day after day w/ this phone and when you spend that damn much money on one, you figure that you wont have to worry about all these little problems...and they add up to amount to one pissed off customer. hell if att had something else w/ wm6 & office & wifi, i'd be using it now instead of feeling like im getting shafted by purchasing this POS.
Click to expand...
Click to collapse

whk said:
I understand that your phone is behaving in a way that you do not like. It is either:
1. a bad phone - take it back
2. it is behaving correctly and you do not understand it - in that case indicate here AFTER SEARCHING what your problems are and I am pretty sure that you can get them solved.
3. you have hosed something up - again AFTER SEARCHING ask and you shall receive.
As a newbie myself I have found this a wonderful wealth of knowledge. HOWEVER - if you do not TRY and helpyourself - put on your asbestos suit.
Now - it is entirely possible that you have purchaseda high maintenance phone that has lots of power that you do not need and should not have because it will take more than you want to invest in it.
Your decision.
(BUT - I would quit griping here because you will get VERY LITTLE sympathy.)
Bill
Click to expand...
Click to collapse
yeah i wasnt really looking for sympathy...but thanks for the tip, i'll digress prior to the rant next time. its just getting more & more frustrating. the purpose of my post was to in fact garner some sort of assistance in regards to the auto complete not working on the phone.
the other issues i've had w/ the phone are issues that are seemingly unable to be fixed. ie. the camera lag issues, the utilization of the phone as a 56k modem, or other things like that. i wouldnt say the phone is too much work for me as i dont mind putting forth the effort but it just makes me wonder how a phone can be sold so haphazardly without many of these issues resolved prior to it being released. /end rant
edit: i just wanted to shed more light in regards to the situation that i've found out. this is the only way i can replicate the issue.
i turn the phone on. go into messaging, its defaulted back to keyboard input, i change it to block recognizer. begin to input letters. no auto complete. after about 3 words, auto complete pops up. i click one of the options. it doesnt go away. i wait for the auto complete applet to leave. it does, i begin to type & at this point the lag has commenced. auto complete will not show up again unless i stop adding letters to the sms. when i do so, about 8-10 seconds later the auto complete pops up. i finishe the sms & send or cancel it. now everything is laggy. i cant access apps, if i lock the phone i cant unlock it. everything is frozen w/ an absurd delay, as in i've waited over 5 minutes & the unlock will not remove itself. the only thing that i can do is turn the screen off by clicking the power button. when i resume i get the top today bar and the bottom unlock bar, everything in the middle is blanked out. the only way i have been able to continue passed this point is to pop the sim door forcing it to cut the phone off, then replace the sim door lock. if i dont use the auto complete function on the phone i dont have any issues whatsoever. hopefully the added info helps. thanks.

After reading this I checked and autocomplete was not working! I recently updated Kaiser tweak and remember putting 6 words in. When I checked, it was set to 0 words. I changed it back to 6 words and is working fine again. Not sure how it got set to 0.

[Q] Impossible to fix auto turn off

Brief history: I bought my Kindle Fire HD in November 20012. It was the first android device I had, so I did not know anything about it. My first search was for rooting, thing that I could make with the help of this forum. From that moment I started reading the forum because everything was new to me and interesting. Meanwhile my rooted kindle worked fine until at some point began to turn off alone. With help of some people of this forum, I was noticed that the problem were gmail notifications. I disabled the notification and the problem was fixed for several months . . . but after that she started doing it again.
There began -also with the help of people on the forum- an odyssey of endless tests, install and uninstall apps, upgrades, downgrades, battery calibrations, etc. until I decided to install TWRP and flash CM 10.2. Of course I learned a lot in this process and I am very happy with CM 10.2.
But what which leaves me sad, very sad and frustrated, is that remain turning off arbitrarily and randomly!!!!!
It can spend two whole days working fine until battery is low, but it can also happen that its turns off every 10 minutes. It is totally independent of the battery charge, although it tends to do more when it is around 50%!
After that, sometimes I can turn-it on normally, but sometimes I have to try 10 or 20 times because she turn off again while charging system.
If I plug-it (to wall or PC) she normally turns on and does not auto turn off again (while plugged).
My latest finding is that if when she turns off itself I shake-it vigorously I can then turning on normally. It's like there's a loose connection or something like that.
As I'm outside the U.S. have no chance of sending it to Amazon.
I really appreciate if someone have some idea about this problem.
I want to thank again all those who given me very good suggestions. It is thanks to them that I learned a lot.
I edit to coment another thing. When I use Corpse Finder from SD Maid, it detect 3 files: .adobe-digital-editions; kindle and Digital Editions ( the three placed in: /storage/emulated/0). No matter how many times I clean it, they always are found in a new corpse search. I don´t know if that its relevant, but is strange to me.

The same problem, HELP US
Elgari said:
Brief history: I bought my Kindle Fire HD in November 20012. It was the first android device I had, so I did not know anything about it. My first search was for rooting, thing that I could make with the help of this forum. From that moment I started reading the forum because everything was new to me and interesting. Meanwhile my rooted kindle worked fine until at some point began to turn off alone. With help of some people of this forum, I was noticed that the problem were gmail notifications. I disabled the notification and the problem was fixed for several months . . . but after that she started doing it again.
There began -also with the help of people on the forum- an odyssey of endless tests, install and uninstall apps, upgrades, downgrades, battery calibrations, etc. until I decided to install TWRP and flash CM 10.2. Of course I learned a lot in this process and I am very happy with CM 10.2.
But what which leaves me sad, very sad and frustrated, is that remain turning off arbitrarily and randomly!!!!!
It can spend two whole days working fine until battery is low, but it can also happen that its turns off every 10 minutes. It is totally independent of the battery charge, although it tends to do more when it is around 50%!
After that, sometimes I can turn-it on normally, but sometimes I have to try 10 or 20 times because she turn off again while charging system.
If I plug-it (to wall or PC) she normally turns on and does not auto turn off again (while plugged).
My latest finding is that if when she turns off itself I shake-it vigorously I can then turning on normally. It's like there's a loose connection or something like that.
As I'm outside the U.S. have no chance of sending it to Amazon.
I really appreciate if someone have some idea about this problem.
I want to thank again all those who given me very good suggestions. It is thanks to them that I learned a lot.
I edit to coment another thing. When I use Corpse Finder from SD Maid, it detect 3 files: .adobe-digital-editions; kindle and Digital Editions ( the three placed in: /storage/emulated/0). No matter how many times I clean it, they always are found in a new corpse search. I don´t know if that its relevant, but is strange to me.
Click to expand...
Click to collapse
I HAVE THE SAME PROBLEM, I DON´T KNOW WHAT´S HAPPEN. Can you fix it?

i have heard occasionally around on the forums of peoples power buttons and such doing this after a while, if that is the case you might be able to test for it but its kinda complicated. Is it sleeping or shutting off? If it's shutting off it would be interesting to see why but you'd have to have either a logcat running on the pc the entire time, a cat of the kmsg, or something of that nature running and turn off while its doing that, then you can find the root of the problem. If it won't do it while plugged in, cm has a way to wirelessly do adb commands. I think hashcode said in his sources theres a test binary for the buttons to see if they are doing anything, but i'd have to figure out how to cross compile it by itself if thats the case, unless its precompiled.

Yes, cassualy I fix it last week. I open the Kindle, looking the wires and conectors and close again. And voila . . . fixed!
Enviado desde mi Amazon Kindle Fire HD mediante Tapatalk

[Q] XT925 hard bricked - battery failure during factory reset. Halp

Hi guys.
First post, apologies if it is in the wrong place.
I was given a Motorola XT925 3 days ago, running what I can only assume is the most recent version of android (i tried updating it, and it claimed it was up to date). No SIM card in, no SD card.
All was well, until I noticed an app, "media" sucking 50% of the battery. It was killing me, so I did some extremely brief Googl-ing and arrived at the conclusion that a factory reset would be a sensible thing to do to nip the problem in the bud.
Unfortunately, my battery ran out half way through the reset (derrrrrrpppp), leaving my new phone semi-hard-bricked.
The loading icon will come on sometimes if it's put on to charge after some time off charge, and sometimes the stupid little robot even pops up, with a loading bar underneath him, and a tangled blue web protruding from his abdomen. He freezes a short time later.
The power and volume buttons are unresponsive, and the whole semi-booting pattern is erratic, but things seem to happen if I leave it off/on the charger all day.
I have a suspicion that my phone in it's current state has half the operating system un-installed, and will therefore not boot correctly.
Anyway I was hoping to get some recommendations for the most appropriate next step. I will be taking it to a nearby shop tomorrow, and see-ing if the people who sold it to the person that gave it to me can help...
I have read about "flashing" devices etc, and if the shop-people can't work it out, I'm probably going to give it a try. I am running a mac as well, so many flashing programs will probably be incompatible.
Thanks for the help
tl;dr: Motorola XT925 hard-bricked following complete battery depletion during factory reset. Wat do?

metal man007 said:
Hi guys.
First post, apologies if it is in the wrong place.
I was given a Motorola XT925 3 days ago, running what I can only assume is the most recent version of android (i tried updating it, and it claimed it was up to date). No SIM card in, no SD card.
All was well, until I noticed an app, "media" sucking 50% of the battery. It was killing me, so I did some extremely brief Googl-ing and arrived at the conclusion that a factory reset would be a sensible thing to do to nip the problem in the bud.
Unfortunately, my battery ran out half way through the reset (derrrrrrpppp), leaving my new phone semi-hard-bricked.
The loading icon will come on sometimes if it's put on to charge after some time off charge, and sometimes the stupid little robot even pops up, with a loading bar underneath him, and a tangled blue web protruding from his abdomen. He freezes a short time later.
The power and volume buttons are unresponsive, and the whole semi-booting pattern is erratic, but things seem to happen if I leave it off/on the charger all day.
I have a suspicion that my phone in it's current state has half the operating system un-installed, and will therefore not boot correctly.
Anyway I was hoping to get some recommendations for the most appropriate next step. I will be taking it to a nearby shop tomorrow, and see-ing if the people who sold it to the person that gave it to me can help...
I have read about "flashing" devices etc, and if the shop-people can't work it out, I'm probably going to give it a try. I am running a mac as well, so many flashing programs will probably be incompatible.
Thanks for the help
tl;dr: Motorola XT925 hard-bricked following complete battery depletion during factory reset. Wat do?
Click to expand...
Click to collapse
Hi,
Unfortunately, we cannot help you with your XT925 on the Moto X forum.
You can post your request here: http://forum.xda-developers.com/droid-razr-hd/help
Someone in the Razr HD Forum will be better suited to help you with this.
Good Luck.

Please Help: Rooted & stock. OS won't load unless the charger is plugged in

This is a very strange problem. I never saw anything similar in my life and I searched for someone with a similar problem but I cannot find anything. So I am posting this thread, maybe someone here knows what I should do.
This tablet has been riddled with problems, but this one makes it close to useless. I had several problems since I got the tablet where it won't wake up after sleeping and you had to reboot the thing, where the dock is not available after sleeping and you have to undock and redock it, where the battery drains while sleeping etc etc. Annoyances but I can live with them. I know there is a fix for the dock and you have to send it to Asus, but shipping is expensive so I'll learn to live with it.
This problem though.. this is a big one. So just to clarify, the tablet is rooted with the original 4.4.2 ROM. I did not make any changes in the past week. Yesterday morning, I woke up and used it normally. Later that morning I unplugged it from the charger and that's when I noticed this problem. So while it is connected to the charger the tablet will function normally. After I unplug it the tablet will freeze after a few seconds, reboot on its own and then it will boot until the icons start coming up. Usually after this you get the lockscreen, but instead the screen will black out. After a few seconds the icons start coming back and the the screen will black out again and so on. This loop will continue forever unless you plug the charger in. When you plug in the charger, the icons will come up and after you get the lock screen (instead of the black screen), and you can use it normally. If you unplug it again, the boot loop starts again. This behavior is the same whether using the dock or not.
I don't want to do a factory reset just yet if I can. Last time I did a factory reset, the tablet would not boot and I had to send it back for a replacement. When I get to the fastboot screen, trying RCK I get the dead Android with the red exclamation, and cold booting does nothing.
Any suggestions please? Any kind of log I can get to help? I can post a video if the problem is not clear.
Thanks.

pantera1989 said:
This is a very strange problem. I never saw anything similar in my life and I searched for someone with a similar problem but I cannot find anything. So I am posting this thread, maybe someone here knows what I should do.
This tablet has been riddled with problems, but this one makes it close to useless. I had several problems since I got the tablet where it won't wake up after sleeping and you had to reboot the thing, where the dock is not available after sleeping and you have to undock and redock it, where the battery drains while sleeping etc etc. Annoyances but I can live with them. I know there is a fix for the dock and you have to send it to Asus, but shipping is expensive so I'll learn to live with it.
This problem though.. this is a big one. So just to clarify, the tablet is rooted with the original 4.4.2 ROM. I did not make any changes in the past week. Yesterday morning, I woke up and used it normally. Later that morning I unplugged it from the charger and that's when I noticed this problem. So while it is connected to the charger the tablet will function normally. After I unplug it the tablet will freeze after a few seconds, reboot on its own and then it will boot until the icons start coming up. Usually after this you get the lockscreen, but instead the screen will black out. After a few seconds the icons start coming back and the the screen will black out again and so on. This loop will continue forever unless you plug the charger in. When you plug in the charger, the icons will come up and after you get the lock screen (instead of the black screen), and you can use it normally. If you unplug it again, the boot loop starts again. This behavior is the same whether using the dock or not.
I don't want to do a factory reset just yet if I can. Last time I did a factory reset, the tablet would not boot and I had to send it back for a replacement. When I get to the fastboot screen, trying RCK I get the dead Android with the red exclamation, and cold booting does nothing.
Any suggestions please? Any kind of log I can get to help? I can post a video if the problem is not clear.
Thanks.
Click to expand...
Click to collapse
Hi, to start this reply, I'll let you know that I am no professional at any of this stuff. I am a regular person that has had experience with flashing ROMs and whatnot. In my opinion, this seems like a software (maybe hardware) related problem. So there are a couple of options you have here.
1. Are you still under your warranty period? You could return it and get another one (easy fix)
2. You could try to factory reset, and if it doesn't turn on, rma the tablet (which it sounds like it may be cheaper to just buy a new one anyways)
3. You could try unlocking the bootloader. Then install a custom ROM (kind of risky, but might be less risky than #2)
Overall, you are not in an amazing spot with your tablet. It saddens me to see all the problems with asus's tablets. I have been with them since the transformer prime because of their laptop like tablet makes it easy to use in school, but its always been a struggle staying with their lineup. I have returned their tablets multiple times. Please update when you can
Sent from my SCH-I545 using Tapatalk 2

If you have a microSD in the tablet take it out and try to boot it. I have seen the weirdest problems because of a card on the fritz....
Second possibility: Hardware. The behavior (working fine when connected to power) seems to indicate it doesn't get the charge it needs from the battery. Could be that it is going kaputt. It's not totally fried but enough that the tablet does not get a reliable charge from the battery.
Third option would be to reflash the firmware. That would eliminate a software problem. You will loose root if you do that...
Since you're still on the original firmware, I assume you did not unlock the bootloader and rooted with Towelroot - correct?
Whatever you do, backup everything you care about off the tablet now....

Thanks for your replies/suggestions. I could not use towelroot as it was on 4.4.2 (I think I read it is not possible). The bootloader is unlocked. This is my second tablet as I had returned the original one. I tried putting Cromi-X on it, and when I got to the step to factory reset it (using fastboot), the thing just was stuck in an endless loop. I could not even get to fastboot and my PC wouldn't recognize it. All it did was boot to the ASUS logo (and the message that the bootloader was unlocked) and reboot.
So this is the replacement unit and the charging issue was the problem. I say was because believe me or not the tablet is now smashed to bits. Since it must always be connected with a charger to work, I was carrying it around docked as I usually do and forgot that it was plugged in. I have resorted to an extra long extension cord with the charger plugged in to walk around. Anyway I forgot it was plugged in, the extension cord reached its limit and the charger cord yanked the tablet out of my hands and onto its side - screen facing away. I sweared, feared the worst and went to pick it up. The good news is that it still boots. The bad news is that the screen is completely smashed. The back cover is bent at one corner and the glass is smashed at that corner with cracks running to the other side. The touchscreen is not working anymore either. To add insult to the injury the tablet still only boots up with the charger plugged in..so there's that.
I don't know what to do now. I have contacted ASUS for a possible RMA but got no response yet. The thing is I don't feel like spending more money on it given the problems experienced. A screen with digitizer on ebay is about €75..so not exactly cheap.
I guess we can close this thread as it is now pointless. I hope no one has to go through my experience and that maybe it was a one off thing.
Thanks again to whoever replied. I appreciate it.

Jumping Screen After Nougat

Hi all,
I am completely running out of things to try and do now.
After installing Android 7 on my Note 5 I had the strangest issue that i in general have never seen on a phone. The screen is simply black (which isnt that strange) and the phone is fully functional. Bare with me, after reseting it multiple times so it would finally come on the screen goes crazy and turns goes into so many colours (if it turns on that is). Its either that or jumps all around the phone, quite literally it glitches out completely. Its like one of those virus cut scenes you see in movies, it goes different colours, glitches out, jumps around and completely misformats.
From the beginning i knew this was not a broken screen.
So far i have tried.
1. Factory reseting the phone. That gave me about 5 minutes of normal use until i locked the phone and it wouldnt unlock again.
2. Factrory reseting multiple times... again to no avail, it would work for short periods of time and glitch out again.
3. Reflashing stock Android 7 in Odin. - No avail.
4. Flashing Dr.Kretans Rom... worked for 1 day which made me so happy and think that the problem was solved but then the same problem persisted.
5. Installing Arters Kernel.. (arter97-kernel-n920cig-22.0) Nothing... literally did that today and still NOTHING
6. Re partitioning. Quickest process and no avail.
In more detail, if the phone does sucessfully boot, and bare in mind sometimes it takes more than 2 hours to get ANYTHING on the screen (including recovery which doesnt boot up either until the initial apperance of something on the screen)
I tried taking the phone to a phone shop before doing anything myself and since in England this phone was never released theyre refusing to touch it. I tried calling samsung and they dont want to do anything either cause its not a UK variant.
Could someone please tell me anything else i can try. I feel like im totally running out of options here.
My phone details are as follow
Galaxy Note 5
SM-920I Singapore Singtel Variant
Running on 6.01 (i downgraded from Kretan)
And the kernel is the one previously mentioned v.22.0
I would appreciate anyone's help or suggestions so much at this point. All these problems started since the 7.0 update a few weeks back :/

Oh its also running TWRP recovery (arter97-recovery-n920cig-22.0-twrp_3.0.2-0.tar)