Mishandling, possible rescue? - Xperia Z3 Compact Q&A, Help & Troubleshooting

Good morning,
I am looking for a solution.
I followed a procedure to change ROM with trwp,
I was reckless, didn't make a backup, deleted everything and restarted the phone. here are the steps i followed before rebooting (Advanced Wipe > Select Dalvik, Cache, Data, Internal Storage, System and swipe to confirm wipe.
Go to Erase > Format Data )
Now the phone is stuck on boot screen.
When I put it on charge, nothing appears, no light, no logo.
I have flashtool on the pc, the phone is recognized in fastboot (blue light)
How can I do ?
Thanks and sorry if my post is duplicated.
Warmly

You have no System - install ROM. Whatever guide you follow, just continue.

Thanks for your support.
Could you guide me?
I don't know how to solve my problem.
Merci pour le soutien.
Pourriez-vous me guider?
Je ne sais pas comment résoudre mon problème.
Merci
Mod. edit: post translated. alecxs

NO because too less information. You "followed a procedure to change ROM" with TWRP. what procedure? are you sure you followed it correctly? what ROM you want to install (link)?
Prior to your next posting, kindly read the forum rules.
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation.
Click to expand...
Click to collapse
Thanks
alecxs

Related

I think i have big problem with my n1

Hello,
I have big problem with my rooted nexus one !!
Detail :
the phone hang in boot ( x rainbow ) and i can't open recovery mod !
What i can do ??
Thank you
* : Sorry for my bad English lang
Wrong forum, this oughta go in Q&A.
Anyhow: when did the problem start? Were you flashing a radio, or did you just decide to reboot your phone?
Max-via said:
Hello,
I have big problem with my rooted nexus one !!
Detail :
the phone hang in boot ( x rainbow ) and i can't open recovery mod !
What i can do ??
Thank you
* : Sorry for my bad English lang
Click to expand...
Click to collapse
reflash recovery using fastboot
i think you have another big problem, you are not able to read the stikies so you posted in the wrong section.
I think you need to explain what you've tried to do.
Then some of the clever people on this site, may be able to work out what has happened, more info needed!
Luckily its not really a big problem. You should be able to remove battery, and go to recovery by holding power and volume down, then recovery... if not you will have to re flash recovery like www said.
tjsimmons said:
Wrong forum, this oughta go in Q&A.
Anyhow: when did the problem start? Were you flashing a radio, or did you just decide to reboot your phone?
Click to expand...
Click to collapse
The problem start after root the device directly, i did not flash the radio
Thank you for reply
www1 said:
reflash recovery using fastboot
Click to expand...
Click to collapse
i'll try
Thank you for reply
paratox said:
i think you have another big problem, you are not able to read the stikies so you posted in the wrong section.
Click to expand...
Click to collapse
Then I'll write in the correct section
Thank you for reply
Amdathlonuk said:
I think you need to explain what you've tried to do.
Then some of the clever people on this site, may be able to work out what has happened, more info needed!
Click to expand...
Click to collapse
Okay,
when i received the device i rooted after that i take the memory card to my old nokia becouse i need the contacts when insert the memory i turn on and his hang !!
Thank you for reply
rjhay22 said:
Luckily its not really a big problem. You should be able to remove battery, and go to recovery by holding power and volume down, then recovery... if not you will have to re flash recovery like www said.
Click to expand...
Click to collapse
I'll try, i hope it's not big problem
Thank you for reassuring and reply
after i reflash the recovery his hang too!
i think the system is dead how i can to keep renewing it for life ??
where are you guys !
Try this
Wipe EVERYTHING in recovery (including ext partition if you have one). Wipe the dalvik cache, everything. Then try reflashing. If it doesn't work try a different rom. If that doesn't work make sure it's plugged in and has a good charge and flash a new radio and then a new image. If not, contact HTC.
Straight from Seraph1024's stickied post:
Q: How do I know the phone is bricked?
A: You can not brick a phone unless you are flashing Radio/SPL packages. Make sure if you are doing that, you follow directions VERY CAREFULLY. A bricked phone can not boot into bootloader, recovery, or into normal operation modes. You can not connect to a bricked phone via adb or fastboot. You can only see one screen on the phone and it will be the first splash screen.
Sorry to hear.
brashmadcap said:
Wipe EVERYTHING in recovery (including ext partition if you have one). Wipe the dalvik cache, everything. Then try reflashing. If it doesn't work try a different rom. If that doesn't work make sure it's plugged in and has a good charge and flash a new radio and then a new image. If not, contact HTC.
Click to expand...
Click to collapse
I can't open recovery mod but i can enter the bootloader and fastboot
i try to reflash the recovery from fastboot mod but his still not working
cue_32 said:
Straight from Seraph1024's stickied post:
Q: How do I know the phone is bricked?
A: You can not brick a phone unless you are flashing Radio/SPL packages. Make sure if you are doing that, you follow directions VERY CAREFULLY. A bricked phone can not boot into bootloader, recovery, or into normal operation modes. You can not connect to a bricked phone via adb or fastboot. You can only see one screen on the phone and it will be the first splash screen.
Sorry to hear.
Click to expand...
Click to collapse
But i can see the bootloader and fastboot or "Hboot" !!
Is there any one that wants to help me ??
Pm me what's up and what you've done so far to try and fix it. ill try to help you.
I try Everything i want to format Everything in phone and do it again like a new device, but how ??
plz reply !!

Flashed Honeycomb Alpha 2.5 now have Spanish language SGT

anyone else have this problem ? I could navigate a bit in Spanish, but without a key board I was sunk.
Anyone have any experience with this problem ?
thanks in advance
Sprint 3G SGT
It's Catalan. And you prob selected the first selection in the setup wizard thingy when it first booted.
Power down. Boot into cwm and wipe the user space to wipe that setting (and all your others). Then select reboot and be careful what you click on.
Thanks for the input. I flashed back to stock, but I will reflash and proceed with care.
again thank you for the tip
I reflashed this ROM again... and the first thing I see is the EULA. then the Catalan lang start page..
dosen't matter what I do even if I touch nothing, I get no choice of English or any other language, it just starts in Catalan.
see pic below.

[Q] How to get back to stock?

I am trying to get back to stock for now. I am getting little tired of the bugs in most custom roms. I know most creators have invested a lot of time, but i think good old stock is good enough for me. I have a few questions though:
I am from the Netherlands and i know i need to download from http://www.sammobile.com/firmware/
I selected this version and downloaded it:
S5830XWKS9 2.3.5 2011 October
I got odin 4.38 setup, but what are the steps to now safely revert back to stock? I can't find it anywhere.. Really thanks for any help. It can be a risky procedure, that is why i am asking.
Also, will i lose root if i do this?
Put phone in download mode
Dan putt je de phone in de usb
En je moet samsung kies installed hebben
herpderp © aint got money to pay to my fish
Thanks, but could someone provide a link or a more detailed description. I don't want to mess up this..
1. Turn off your phone
2. Just for sure unplug sd card and sim card.
3. Go into download mode. (Hold volume - and home and power)
4. After the yellow "downloading" appears on your display plug the usb if you already didnt and run odin also if you already didnt.
5. Select OPS you have probably already downloaded it. (cooper.ops)
6. Sign one packcage and dont touch the other boxes.
7. Select the FW you have downloaded from sammobile and put it in the one packcage field.
8. Click on "start".
9. Wait untill the odin shows "PASS" in a blue square.
10. Done
Wooo Hooo sent from my little Acie.
acceleratus said:
Thanks, but could someone provide a link or a more detailed description. I don't want to mess up this..
Click to expand...
Click to collapse
yes you will lose root...because you are installing stock ROM..
its not the risky procedure unless you follow the instructions correctly...
just goto this link to have right ODIN ver for your phone
and for right instructions to how to flash it...go to this link
and download flash guide for your mobile...all the best..
understand the instructions and follow it...
if you have a problem of bootscreen loop after installing it then dont panic...go to recovery mode and do the wipe data reset and wipe cache partition..then reboot system..
happy flashing
zoals gezegd ^^^^^^
from XDA app
Press THANKS if I helped

[Q] Did I BRICK mine? :( Please help me resurrect it from the dead!

Hi there,
First things first I'm a big noob when it comes to tweaking/flashing/anything with a phone; and life just confirmed it.
All I wanted was to make pics without shutter sound, to capture powerpoint screens in college instead of having to write ten sentences in 10 seconds. I couldnt just turn the shutter sound off! After some reading I thought I needed to both get my P880 rooted and needed CWM Recovery; I managed to do everything exactly as stated here:
Rooting:
http://theunlockr.com/2013/01/14/how-to-root-the-lg-optimus-4x-hd/
Installation of CWM Recovery:
http://theunlockr.com/2013/01/14/how-to-install-clockworkmod-recovery-on-the-lg-optimus-4x-hd/
After that I tried to install this rom via CWM Recovery -> install from SD/zip file -> CWM_deodex_rom_v10e_signed.zip
http://forum.xda-developers.com/showthread.php?t=1871858
I did that because this mod had the camera mod I wanted installed already.. The installation went fine, the phone stated.
But when I hit reboot, it got stuck in bootloop.. All I can do now is press PWR + Vol down (read that after some googling) and enter 'Android system recovery <3e>'.
It shows this list of options (above a picture of a dying android with a red exclamation mark on top of it)
reboot system now (done that few times now, gets stuck in bootloop everytime.. Well I think it's that. It gets stuck at the LG screen, it's my interpretation that that is the correct use of the word bootloop)
apply update from external storage (well please dear lord let there be an escape through this option)
wipe data/factory reset (no results after hard resetting, still bootloop)
wipe cache partition (did this too)
apply update from cache (not this, why whould I)
wipe nv partition (did this too)
Toggle Console VART Log (and well, I don't think this option's going to save me)
I wanted an option to turn off the shutter sound. Well, things changed. Right now I'm willing to do anything to get the phone back to life! Google couldn't really help me out.. Well better stated: I can't help myself out using google, so I'm asking for your help! Please all XDA tweakers, modders, hackers, etc. unite and help! It is appreciated A LOT! Please state what I need to do now, I just want to get it back to a working state. Or please confirm that it is not completely BRICKED ;x
edit: I followed some advice from the unbrick-thread http://forum.xda-developers.com/showthread.php?t=1843830
Now I'm stuck @ S/W Upgrade - Please wait while upgrading ... screen. Please help me out
edit 2: What I'm doing now.. via the LG PC Suite -> Lg Mobile Support Tool -> Recovery (you need to fill in either IMEI or S/N and model)
Status: Downloading the LG Mobile Phone Software Update program. Est time left: 44:40 for 400mb.. Nice server
Re-flash using LGFlash Tool.
Use compatible .dll depending if its v10x or v20a.
Search a little, there's a lot of info about that
Wait, my stock v10c's camera already had the function to mute the shutter sound. Why did you need to do anything else?
RuedasLocas said:
Re-flash using LGFlash Tool.
Use compatible .dll depending if its v10x or v20a.
Search a little, there's a lot of info about that
Click to expand...
Click to collapse
I managed to get my hands on the latest version of LGNPST - I suppose that's what you mean with LGFlash Tool.
But how do I know if the phone is v10x or v20a.. ? I think all methods to look that up are blocked, since Im in bootloop with only android system recovery <3e>
Thanks!
nvm: just found this thread http://forum.xda-developers.com/showthread.php?t=1861854, found out that you are an awesome guy!
just flashed to v20a, she's back alive
japzz said:
I managed to get my hands on the latest version of LGNPST - I suppose that's what you mean with LGFlash Tool.
But how do I know if the phone is v10x or v20a.. ? I think all methods to look that up are blocked, since Im in bootloop with only android system recovery <3e>
Thanks!
nvm: just found this thread http://forum.xda-developers.com/showthread.php?t=1861854, found out that you are an awesome guy!
just flashed to v20a, she's back alive
Click to expand...
Click to collapse
and congrats for you got your option to silently take pics after all
Haha yeah lulz, thanks!

My phone stop to bot and charge after i instal a bad ROM/ please HELP

hello i trying to instal a ROM from this site named Android revolution HD ( i read description and show it is compatible with my samsung galaxy s3 mini) but i think i doing something wrong when i downlwad this rom in my phone then i use one app from google play magazin (free) who can instal a ROM from normal samsung ROM run .
After i instal ROM and rebot ,my phone stop to load ROM and i see he did not response when i try to charge him from outlet
i ask anyone who know what i must to do help me to save my phone !!!!!!!!!!!!
roselo said:
hello i trying to instal a ROM from this site named Android revolution HD ( i read description and show it is compatible with my samsung galaxy s3 mini) but i think i doing something wrong when i downlwad this rom in my phone then i use one app from google play magazin (free) who can instal a ROM from normal samsung ROM run .
After i instal ROM and rebot ,my phone stop to load ROM and i see he did not response when i try to charge him from outlet
i ask anyone who know what i must to do help me to save my phone !!!!!!!!!!!!
Click to expand...
Click to collapse
Sorry but you should not work on your phone before you know what you are doing in the first place
I don't know the site and the ROM so..isn't there a forum to ask?
What exactly did you do to install the ROM?
Explain step by step and be more accurate please!
first i download this ROM from http://forum.xda-developers.com/gal...m-android-revolution-hd-52-0-android-t1797334 then i instal this rom to my flash card on android phone , then i download from google play apps to instal ROM from https://play.google.com/store/search?q=rom (one from first 3 ...i forgot what i use ) after i run this app to instal ROM on my phone he ask me about ROM file location , i select flash card in floder where is my downloaded ROM (android revolution) then i follow instruction to instal after that ask em to rebot mobile .....after i rebot android stop to bot and stop to charge from outlet
roselo said:
first i download this ROM from http://forum.xda-developers.com/gal...m-android-revolution-hd-52-0-android-t1797334 then i instal this rom to my flash card on android phone , then i download from google play apps to instal ROM from https://play.google.com/store/search?q=rom (one from first 3 ...i forgot what i use ) after i run this app to instal ROM on my phone he ask me about ROM file location , i select flash card in floder where is my downloaded ROM (android revolution) then i follow instruction to instal after that ask em to rebot mobile .....after i rebot android stop to bot and stop to charge from outlet
Click to expand...
Click to collapse
It is pretty hard to say what's causing this..
Did you do a full wipe/factory reset and then flash the new ROM?
I do not know how it's done with ROM manager etc. But I would recommend
that you flash a recovery (like TWRP f.e.) with Odin to your phone (there a plenty
or how-to-manuals here)
Then do a full wipe and flash the ROM again.
There is a guide on the ROMs side how to flash it via a recovery.
Read first how to do a factory reset/full wipe in the Forums here.
PePeMoke said:
It is pretty hard to say what's causing this..
Did you do a full wipe/factory reset and then flash the new ROM?
I do not know how it's done with ROM manager etc. But I would recommend
that you flash a recovery (like TWRP f.e.) with Odin to your phone (there a plenty
or how-to-manuals here)
Then do a full wipe and flash the ROM again.
There is a guide on the ROMs side how to flash it via a recovery.
Read first how to do a factory reset/full wipe in the Forums here.
Click to expand...
Click to collapse
phone was rooted before . yes i do a full wipe /factory reset +clear chacke from "phone bios" then i instal original samsung software before but this ROM (android revolution hd ) i started from samsung original Rom not from " phone bios" . im not teacher but i know what u mean .
problem is now my phone do not answer when i start bios (power+volume up+menu) or to load original software and he stop to charge on outlet (battery ) , usb also not working , odin software does not recognize this android phone to be conected on any port COM to my pc (that cause phone is off).
any help ???
roselo said:
phone was rooted before . yes i do a full wipe /factory reset +clear chacke from "phone bios" then i instal original samsung software before but this ROM (android revolution hd ) i started from samsung original Rom not from " phone bios" . im not teacher but i know what u mean .
problem is now my phone do not answer when i start bios (power+volume up+menu) or to load original software and he stop to charge on outlet (battery ) , usb also not working , odin software does not recognize this android phone to be conected on any port COM to my pc (that cause phone is off).
any help ???
Click to expand...
Click to collapse
I am afraid that I can not help you..
Sounds bad to me..
Maybe search the forum for "soft brick" and "hard brick".
I've seen some threads regarding this issue.
Wish you luck! :fingers-crossed:
PePeMoke said:
I am afraid that I can not help you..
Sounds bad to me..
Maybe search the forum for "soft brick" and "hard brick".
I've seen some threads regarding this issue.
Wish you luck! :fingers-crossed:
Click to expand...
Click to collapse
cam u give some good links about soft brick" and hard brick" ?
roselo said:
cam u give some good links about soft brick" and hard brick" ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/search.php?searchid=388864984
Try one of these..just searched for "brick".
Maybe someone there with the same problem.
PePeMoke said:
http://forum.xda-developers.com/search.php?searchid=388864984
Try one of these..just searched for "brick".
Maybe someone there with the same problem.
Click to expand...
Click to collapse
your link is corupted mine not working. i use your link and ....
" vBulletin Message
Sorry - no matches. Please try some different terms."
roselo said:
your link is corupted mine not working. i use your link and ....
" vBulletin Message
Sorry - no matches. Please try some different terms."
Click to expand...
Click to collapse
Just Google "brick" in the S3 Mini forum.

Categories

Resources