Hi all! First of all my name is Matias, I'm new here and I'm no expert modding or repairing phones. I've done some tweaks, flashing some roms in old devices but nothing complicated. I'm happy that this forums exists as I've found helping comments or threads more than once. Today I signed in because I can't solve a problem with a phone I'm trying not to throw away.
I have a Samsung J5 Prime (SG570M) that is stuck in download mode. I have already flashed the stock rom with Odin (both last version) and when the flashing ends, it says 'succesful' in Odin, but when the phone reboots it doesn't boot up, the screen remains black. It's not a bootloop because the samsung logo doesn't even appear. Any suggestion what could it be or what should I do? I already tried changing PC, USB port and cables.
Any help would be awesome, thanks in advance!
Mobiloop said:
(...)
I have a Samsung J5 Prime (SG570M) that is stuck in download mode. I have already flashed the stock rom with Odin (both last version) and when the flashing ends, it says 'succesful' in Odin, but when the phone reboots it doesn't boot up, the screen remains black. It's not a bootloop because the samsung logo doesn't even appear. Any suggestion what could it be or what should I do? I already tried changing PC, USB port and cables.
Any help would be awesome, thanks in advance!
Click to expand...
Click to collapse
If you haven't used the 4-file flashing firmware in Odin, you should.
Hey, thanks for answering! Yeah, I have used the 4-file firmware and followed all recommended steps from the sammobile guide. Don't know what else to do :/
Related
Hello,
I have flashed my Galaxy Tab with roto JMI, but it's stuck at the "GalaxyTab / Samsung" boot screen.
I can get into download mode with volume down and power, I can reflash it but in the end it does not boot.
What can i do?
loony
*bump* anybody?
Help please!!! I have the same problem!
I am still having this problem. I am wondering if there is any way how to debug whats happening at the Samsung logo screen. With adb the devices is not detected (it seems not to be detected at the usb controller).
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Hi, I have exactly the same problem.
After upgrade du JMI roto with odin 1.7 (all upload seems to be ok, repartition with p1 and pda file Roto-JMI-Full-v2 no error message) but the device hangs on samsung galaxy tab logo and don't boot.
In my case previous version was pda jj3/phone jid / scs jj2
rsmurdoch said:
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Same Problem
Im on the SPH-P100, I have the same issue I can access it in Adb the log shows it in stalling all of my old .apks but it never boots past the logo.I have re flashed also but no luck plz help if u can i can post the logcat here but it goes for hrs -_- I assume it loops the process.
loonyt said:
Device it GT-P1000 (German/European version)
Flashed with P1000OXAJM6
Click to expand...
Click to collapse
So, this one contains a bootloader (Sbl.bin). maybe thats the cause of the problem. Still, I wonder why it started in the first place and then after some reboots it gets stuck. I tried different Kernels with no luck. Maybe I should try to flash a new bootloader? However, that could brick the device forever.
Loonyt
loonyt said:
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Click to expand...
Click to collapse
*bump* Can anybody help?
I have a very similar problem.
I flashed the [ROM] Roto JMI Pre-Rooted Firmware v2 [Feb 4, 2011], and got stuck on the Samsung Boot screen.
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Hopefully, someone knows what's going on. If not, I'm taking it back to my carrier, and asking them to fix it (assuming they'll fix it).
Maybe this will help for the bootloader.
Its a bootloader patch. Please read thru the thread. Hope it helps.
http://forum.xda-developers.com/showthread.php?t=888071
Sent from my GT-P1000 using Tapatalk
dlui1 said:
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Click to expand...
Click to collapse
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Qsilver2001 said:
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I meant that I can get into Download mode, with the Downloading logo, but doesn't get detected by Odin. And it stays stuck on the Samsung boot logo if turned on normally. Can't get into recovery either.
Before I flashed the Roto ROM, Odin was working perfectly fine. I've been flashing other kernels and ROMs before. But now, the USB doesn't even seem to get detected. It's like nothing is plugged in. Can't even choose to install/uninstall old/new drivers.
I dont think it's the USB port, as I've tried to connect to Odin on 3 different computers, trying every available port on each. It's looking like the USB connector is just dead or something.
My tabs mainboard was broken, it was replaced and now it works again.
Sent from my GT-P1000 using XDA App
Same problem here man. I CAN get in to download mode. Odin recognize it normally. I CAN download normally. Look likes everything is normal, but after update it restarts, but hangs on Galaxy Tab Samsung logo. I've tryed everything with different firmware, custom-roms, hacking things, but with no success.
Can someone please help me?
Same problem here. My tab is stuck at samsung galaxy logo and until now, no one could provide an answer.
I flashed some ROM from samfirmware that must of locked the bootloader (JMF). Then I tried to flash JM6, JMA, JMC, JMK, JJ4, JJ7, JM5, JJ1, JID and almost all ROTO's. with and without pit files using ODIN 1.7. I also tried a stock ROGERS ROM (that i downloaded from this forum) using Heimdall. The tab always boots to samsung galaxy tab logo. I've done alot of reading in this forum and followed many flashing instructions but when applied, it doesn't work for me.
My main concern: is there still hope with the tab ? or it's gone forever.
Is there any specific order that i must follow when flashing ? ( ie, flash one specific ROM before another). The tab was canadian that was flashed to euro.
Thanks for reading my post.
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
handfree said:
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
Click to expand...
Click to collapse
Same prob. tab reboots to samsung logo.
Same Here, I tried many combinations with the help of experts on this board. Conclusion: shipped to Sammy for warranty repair.
Hi All,
I was try to change the stock animation on Infinitum when after restarting I wasn't abble to sign in. There was a msg saying something baout "Report" "Ok"..." Settings.
I shut down the SGS and made a nandroid restore, the device restarted but it shows the Samsung logo blinking evry six seconds and a can't go to recovery anymore only downloading.
What should I do?
Thank you all in advance.
what program did you use to root your phone?
broncosfan007 said:
what program did you use to root your phone?
Click to expand...
Click to collapse
I think was "OneClick Root"...
I'm trying to find .tar files to recover using Odin but I can't find... Old SGS + Froyo + Portuguese TMN (carrier)... Any help would be apreciated.
Heeeeeelpppp
Now things are getting very strange. I got the original firmware and flashed the Galaxy S with Odin. All went well without errors. But now, when restarting, the device makes the carrier original sound and is swapping between the carrier logo and galaxy logo, endlessly....
I can use the pseudo-CWM menu with the options Install from sdcard, Wipe Factory and Wipe.
Any help or idea to follow?
(I love this mobile )
Definitus said:
Now things are getting very strange. I got the original firmware and flashed the Galaxy S with Odin. All went well without errors. But now, when restarting, the device makes the carrier original sound and is swapping between the carrier logo and galaxy logo, endlessly....
I can use the pseudo-CWM menu with the options Install from sdcard, Wipe Factory and Wipe.
Any help or idea to follow?
(I love this mobile )
Click to expand...
Click to collapse
Hmm..when i screw something up with my SGS, I just go download, and make myself a stock ginger trough ODIN.
Try the steps for installing andy 2.3 as a preperation for CM7
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
slicer91 said:
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
Click to expand...
Click to collapse
You will hadware buttons failure when you flash a i9000 ROM on an Anycall M110S ( Korean Galaxy S) , so I am curious are you sure your phone is not an Anycall M110S? since you also getting Anycall boot screen...sounds odd, that i9000 will do that.
For USB connection problems , just try link on Quick Fixes and Solutions link below
slicer91 said:
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
Click to expand...
Click to collapse
Go back your original firmware...
Any updates to this?
I am having a similar situation. I tried flashing ICS ROM to my Anycall Samsung Galaxy S GT-I9000. It is now stuck in recovery mode. I tried doing factory reset and wiping the cache and dalvik cache and tried reflashing. Everything goes fine but gets stuck in the recovery mode - more correctly in download mode but the download mode logo flashes twices and enters to recovery mode.
Any possible solutions to get me out of this mess?
Thanks,
Sid
your problem will be solved with this post:
http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
Edit : above url is for S+ your device is S , sorry .
Thanks, but anything similar for Galaxy S? And remember my download mode does not stay, if flashes twice and runs into recovery mode. So if your solution is something to do in recovery mode it will be helpful (or if your solution is to first make me stay on download mode and then flash something using odin I will be thankful)
Regards,
Sid
sidswami said:
I tried flashing ICS ROM to my Anycall Samsung Galaxy S GT-I9000.
Click to expand...
Click to collapse
Check your Model, Anycal does not make GT I9000, it makes only M110S and firmwares / solutions for them vary.
If you have Anycal M110S visit PIT STOP link below to solve your problems
Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
you can get a rescue kit from My Android Collections and or a solution from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.
worked for me
Hi..also had the boot loop...
fixed that easily by removing the accu..
removing external SD !!
Thats it !
Worked for me !
Later on I inserted the SD again..and everythings fine
beben3 said:
Hi..also had the boot loop...
fixed that easily by removing the accu..
removing external SD !!
Thats it !
Worked for me !
Later on I inserted the SD again..and everythings fine
Click to expand...
Click to collapse
Glad that worked for you, but I for some reason can't be so lucky. I tried to also flash CWM 10 but after the home key not working I decided to flash Slim Bean and now I am stuck. My phone isn't even recognized by Odin any more and I have tried different USB ports and even my laptop with Heimdall. I don't know what to do at this point, but any kind of suggestions would be great. Usually when I get stuck I just flash back to Stock and start all over with a new ROM or kernel but I have no idea where to go from this point.
I went through all the posts on bricking, did what others tried but to no avail. I had CyanogenMod on it with TWRP and tried to do a restore (bad idea) that's when it bricked.
I got the stock tar file, used a USB jig to get me into download mode, used Odin 3.7 to flash it, all went smooth but she still hangs on the Samsung logo. I've tried it 3 times, same results.
Do I need a Pit file?
Am I missing anything really obvious and important?
Should I flash a rooted stock tar since it's was rooted before I bricked it?
All the links on the 'Goodies' page for the Note are all dead links now so please don't refer me there.
Thanks for any help.
Fixed the problem
JessSayin said:
I went through all the posts on bricking, did what others tried but to no avail. I had CyanogenMod on it with TWRP and tried to do a restore (bad idea) that's when it bricked.
I got the stock tar file, used a USB jig to get me into download mode, used Odin 3.7 to flash it, all went smooth but she still hangs on the Samsung logo. I've tried it 3 times, same results.
Do I need a Pit file?
Am I missing anything really obvious and important?
Should I flash a rooted stock tar since it's was rooted before I bricked it?
All the links on the 'Goodies' page for the Note are all dead links now so please don't refer me there.
Thanks for any help.
Click to expand...
Click to collapse
Turns out the USB issue with Windows 7 Pro (64bit) was the problem. Got it all done on an XP computer I keep as a backup for this very reason.
Stock ICS is working great. No more B.S.O.D.'s Yay!
JessSayin said:
Turns out the USB issue with Windows 7 Pro (64bit) was the problem. Got it all done on an XP computer I keep as a backup for this very reason.
Stock ICS is working great. No more B.S.O.D.'s Yay!
Click to expand...
Click to collapse
nice work!
somebody somewhere sometime will find this thread and be very grateful!
c
I'm having the same problem. Trying to put my note back to stock. Now it is also stuck at the samsung logo during bootup. I can't get into recovery mode, tried installing 2 different stock roms and nothing. I have twrp, so I installed cwm to see if I can use that recovery and nope. The only thing I can do is go to download mode. I also tried doing all of this on an XP as I also did this first on Windows 7, and didn't work for me. Someone help please.
Exactly same issue
Hey
I'm having exactly the same issue, only difference I first tried this on Windows 8.1 64bit and then Windows 7 32bit - Still just getting the samsung circled logo on boot.
Did you ever find a solution ?
Should I not use Odin to flash a new ROM?
Help me!!
I'm having the same problem, note t879 lock in logo samsumg, did step by step through odin 2 STOCK ROMS (T879UVLG3, T879UVMA1), the process ends successfully, but the phone restarts and crashes in logo samsumg. anyone have any solutions? help me please
Hello,
I have recently encountered a random shutdown in my Galaxy A5 (A510y) after installing a custom rom (https://forum.xda-developers.com/sa...rience-os-v1-0-updated-02-09-2017-t3666774).I have Used this ROM for about 2 days till the random shutdown, After that i wasn't able to turn my device on also had no access to recovery mode every thing was removed .... OS .. BOOT.. Samsung logo also not showing when i held the power button, And when i plug my usb cable in the phone there is no sign of the battery image.. So i thought to myself my phone is FK*d but i thought about entering download mode which seemed to work .. I continued with the process of installing a new firmware with odin everything passed , but still no OS or Boot Or recovery installed
Can someone please help me as i have no ideas and will take no further step in trying to fix it myself as i will just make things even worst
Thanks much help will be appreciated :good:
JaayTee said:
Hello,
I have recently encountered a random shutdown in my Galaxy A5 (A510y) after installing a custom rom (https://forum.xda-developers.com/sa...rience-os-v1-0-updated-02-09-2017-t3666774).I have Used this ROM for about 2 days till the random shutdown, After that i wasn't able to turn my device on also had no access to recovery mode every thing was removed .... OS .. BOOT.. Samsung logo also not showing when i held the power button, And when i plug my usb cable in the phone there is no sign of the battery image.. So i thought to myself my phone is FK*d but i thought about entering download mode which seemed to work .. I continued with the process of installing a new firmware with odin everything passed , but still no OS or Boot Or recovery installed
Can someone please help me as i have no ideas and will take no further step in trying to fix it myself as i will just make things even worst
Thanks much help will be appreciated :good:
Click to expand...
Click to collapse
Did you, while flashing, thick "re-partition"? If you are, that is reason.
On your place, I will change computer and USB cable and try again.
If nothing helps, then find PIT files for your phone model and flash it with PIT file (re-partition) and stock firmware.
At first I unticked re-partition and ticked Auto reboot and f.reset time , I then flashed the firmware which had no luck, Secondly I flashed with re-partiion Ticked with no luck aswell ! I also unticked all except for Nand erase Still no luck , I flashed my model PIT file with the original firmware same thing NO luck ... So maybe it's an hardware problem , I have attempted to do this on another computer and still no luck with re-partition unticked.
Hmmm... U already try all available options...
Maybe try with older version of Odin, go on SamFirmware site find your model and look at version of Odin...
Otherwise, u make brick