Hi,
I had battery issues with my note 8 device so before handing over to a local technician, I reset my device. However now it stuck in bootloop and I tried to flash it with official rom, but the bootloader is locked.
Is there any way I can re-install the stable rom on my own?
Sounds like a battery issue. I would suggest going to a technician.
Related
Hello XDA, I'm having a problem with my grandmother's phone, and I'm in a hurry to get this fixed because she needs it for business. Her phone is an AT&T Galaxy Note 3 SM-N900A unlocked to T-Mobile. It was running Android 4.4.2 KitKat, and I tried to update the phone as I did with my grandpa's, who has the same exact phone before we switched to T-Mobile. Because it was unlocked, the phone couldn't receive the OTA Lollipop update due to the SIM card not being AT&T.
After spending 4 hours searching and trying solutions, I came down to one thread on XDA Forums here. I saw it and I ended up using Odin 3.09 to flash the All-In-one/Non-Wipe Tar file onto it, now my phone is stuck in a boot-loop. Strangely, the Lollipop update seems to be installed as when I plug her phone into my PC/charge it, the battery screen is different than the old one which looked shiny and not flat and material like the Lollipop one. Knox has not been tripped, system status is OFFICIAL, and every time I turn on the phone, it proceeds to boot until the AT&T logo screen, where it freezes mid-way vibrates 2 times and boots the same way over and over again.
Is there anything I can do aside from doing a wipe or factory reset, as I mentioned before she has to use the phone for a business she works for and she had somewhat important work on the phone. The worst part of it all is I was stupid and ignored the warning to back my data up first in the firmware thread. Please help, I'm in a very big hurry to solve this and finish the updating/problem.
P.S If it's not a boot loop and it's called something else, whatever. xD
Did you try using Smartswitch to see if it can see and repair and/or reflash? A factory reset may be the only way to fix it because I believe the file layout for KK and LP and different.
Good morning, I hope you can help me. I have a note 9 sm-n960f and with the last update of the stock rom the mobile does not turn on. The update went well and everything was set up fine. The problem I have is that when I turn off the mobile and turn it on, it stays on the Samsung logo and I have to force it off and turn it on again until it starts well, it can stay on the logo several times and other times it starts normally. I have flashed the last stock rom again by odin and the same thing happens, the first boot does it well and lets you configure all the mobile correctly but if you already turn it off and turn it on again, it loops into the Samsung logo and starts when you want. I have also flashed a last stock rom from Germany and I have downloaded several stock roms and the same thing happens to all of them. I have installed custom rom and if they are from android 10 the same thing happens they stay in the logo, on the other hand with android 11 in custom rom it starts perfectly. Could someone give me some advice, I would like to stay on the stock rom for various reasons. To finish saying that when flashing by odin I have tried it with the 4 files and also with the pit file but everything remains the same. I hope your help. Thanks
Try unlock bootloader, so that you can proceed and flash other custom rom.
How to unlock bootloader on Samsung Galaxy Phones
The Linux platform based Android OS is really customizable and easy to use for any user or developer. Just like other devices, the Samsung Galaxy device
www.getdroidtips.com
LR7875 said:
Try unlock bootloader, so that you can proceed and flash other custom rom.
How to unlock bootloader on Samsung Galaxy Phones
The Linux platform based Android OS is really customizable and easy to use for any user or developer. Just like other devices, the Samsung Galaxy device
www.getdroidtips.com
Click to expand...
Click to collapse
I have the bootloader unlocked, but the problem is that all the stock roms remain in the samsun logo and what I want is to have the stock rom. any solution?
I just bought a brand new redmi note 10 pro 6gb 128gb and on the day of delivery the device keeps on rebooting. There was an update pending and updated to the latest miui version and the problem still persists. It was booting randomly before updating but after updating it just keeps on rebooting. Is there any fix to this or do I need to return this?
Maybe there was something wrong with the update, try factory reset from recovery, or if that doesnt help try flashing latest firmware via fastboot.
So I found a recent development in this. Apparently it only reboots when either the wifi or the mobile network is on.
So I have airplane mode turned off n I have removed the sim card as well and now the phone is not rebooting. But as soon as I click on wifi, it reboots.
I can't factory reset it because I activated Duo mobile in it n to reactivate I need to contact my company. It's a hassle
I need dire help . I just downloaded the new MIUI 13 update and rebooted to install it but it went into a bootloop instead.. It's not rebooting into fastboot either.
Never download MIUI updates right after they get released. My Redmi Note 9 (EEA) also got bricked, but on the 12.5 release. I had to send a complaint to the shop where I bought it from and they have reflashed my whole phone, thus losing all my data like authenticator codes and 80 GB of photos and videos with my family. And this is a Mediatek chipset which is very common to get the phone bricked on. Always wait for at least the first patch before updating anything, or just don't update and stick with the already buggy environment.
Hi everyone,
My phone (Redmi Note 10 5G China, camellia) was lost baseband a week ago for no reason. The phone lost signal when I saw, and can't read SIM card 1 hour later. After reboot, baseband version in setting turned to unknown. The MIUI version when this problem occurs is 13.0.9. I tried to flash MIUI to the version at the time of the problem and older version (13.0.3 and 13.0.8) to repair baseband followed with tutorial on internet but had no effect.
When I flashed MIUI 13.0.4 and try to startup, the phone turn to black screen after the Redmi logo appears about 10 secs later, and then nothing happens.
The same problem happened to this phone half year ago. At that time, there was magisk in the system and I think magisk destroyed system and tried to flash to repair the system. Finally, baseband was repaired by flash MIUI 13.0.4, but baseband will lose by reboot, so I flashed again, it was solved. But a month later the same problem happened again, but it only lasted a day, and the next day it repaired itself, in the meantime, I'm just using my phone as before. About a month later I upgraded to MIUI 13.0.9 and didn't occur any problem. At that time, as long as this fault occurred, flash MIUI 13.0.4 could always solve it.
Did the failure occur on the motherboard or just is a software problem like before? If there is no hardware problem, how to solve the problem completely?
Sure Is not a magisk problem . And i dont think is related to board, or a new flash dont solve. I think Baseband is related to kernel. Probably latest update have some bugs. Or more probably u have made a wrong flash procedure. If u put the sim on second slot have same issue?
wetito said:
Sure Is not a magisk problem . And i dont think is related to board, or a new flash dont solve. I think Baseband is related to kernel. Probably latest update have some bugs. Or more probably u have made a wrong flash procedure. If u put the sim on second slot have same issue?
Click to expand...
Click to collapse
All SIM card slots are unavailable.Is flash still the problem?
i didnt never encountered this problem, i can help u so much