Database Develop

Magisk v17.1 and Xpose Module --> kills Magisk Hide/SafetyNet fails

I have a unlocked, rooted Xiaomi Redmi Note 4 running 7.2.1 (Viper mido version)
Got the Magisk v17.1 update this morning. I needed to remove Magisk 16.x via the uninstaller, and install the new update from TWRP Recovery. (a pain, but it seems to work. regular upgrading has a few issues)
Then I installed my preferred Magisk modules. All seem to work as they should except the Xpose Framework v89-v90b3r11 module. When installed it kills Magisk Hide and SafetyNet fails, when I uninstall it, SafetyNet succeeds again (Magisk Hide is usable).
For for now, until the Xpose Framework module is fixed, if you want to use Magisk Hide, probably can't install the Xpose module.
Cheers,
AB

You won't be able to pass SafetyNet if you have Xposed installed on your device. This has been the same since the start and not a Magisk v17.1 thing.
Sent from my #FlagshipKiller3T using Tapatalk

Read the threads
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

DarkSJ1998 said:
You won't be able to pass SafetyNet if you have Xposed installed on your device. This has been the same since the start and not a Magisk v17.1 thing.
Sent from my #FlagshipKiller3T using Tapatalk
Click to expand...
Click to collapse
Funny that, I had it working before. Possibly blind luck. I had Magisk installed and the Xpose Framework, and SafetyNet/Magic Hide was usable.
I just was using only one of Xpose's Module. So I don't need Xpose at all.

airbrushwerx said:
Funny that, I had it working before. Possibly blind luck. I had Magisk installed and the Xpose Framework, and SafetyNet/Magic Hide was usable.
I just was using Xpose's LuckyPatcher Module.
Click to expand...
Click to collapse
Maybe when you were using it, that particular app wasn't able to detect Xposed framework & only checked for root, which was tricked by Magisk Hide. And now the developer might have improved the checks or what not.
Sent from my #FlagshipKiller3T using Tapatalk

Bro, I need to hide magisk from a banking app, Now what can i do?
v 17.1
thanks everyone, It's working :victory:

BengaliBhai said:
Bro, I need to hide magisk from a banking app, Now what can i do?
v 17.1 here is nothing. how can i hide
Click to expand...
Click to collapse
buy other phone for banking

BengaliBhai said:
Bro, I need to hide magisk from a banking app, Now what can i do?
v 17.1 here is nothing. how can i hide
Click to expand...
Click to collapse
Does your banking work without Xposed Installer app installed? My internet banking app detects root if Xposed Installer manager is installed. So what I do is installing or updating the Xposed modules, rebooting, and then uninstalling Xposed manager, and all modules will still work, as they only require that Xposed systemless files (v89.3) are installed.

DarkSJ1998 said:
Maybe when you were using it, that particular app wasn't able to detect Xposed framework & only checked for root, which was tricked by Magisk Hide. And now the developer might have improved the checks or what not.
Sent from my #FlagshipKiller3T using Tapatalk
Click to expand...
Click to collapse
Yes, it looks like it might have been the way I installed the apk after Magisk, but before Xpose-framework. I inadvertently used some 'loophole' that allowed it not detect root, but still have Xpose installed.
Cheers,
AB

BengaliBhai said:
Bro, I need to hide magisk from a banking app, Now what can i do?
v 17.1 here is nothing. how can i hide
Click to expand...
Click to collapse
BengaliBhai,
You probably need to reinstall Magisk.
1) Download the Magisk-uninstaller.
2) Boot to TWRPS (reovery)
3) run the uninstaller. (which should bring back your original boot partition)
4) then install Majisk v17.1
5) reboot into system.
Now Majisk Manager should be fully functional.
I ran into this, v17.0 installed, but MM 5.9..0 wasn't working correctly, not showing modules, not allowing access, etc... Then I got the v17.1/5.9.1 update and still did the same. No boot-looping, but 'root limbo'. The above process resolved it all.
Cheers,
AB

Try xposed module rootcloak works great with my bank app oreo

david6910 said:
Try xposed module rootcloak works great with my bank app oreo
Click to expand...
Click to collapse
Lucky patcher isn't banned from xda? ?

If Your Device Didn't Pass The SafetyNet, Try DeviceSpoofingTool4Magisk From This Thread https://forum.xda-developers.com/apps/magisk/qa-want-to-install-modules-magisk-v13-3-t3800435.

youtuber123 said:
Lucky patcher isn't banned from xda? ?
Click to expand...
Click to collapse
Im not talking about lucky patcher... I talking about a xposed module lol

airbrushwerx said:
Yes, it looks like it might have been the way I installed the apk after Magisk, but before Xpose-framework. I inadvertently used some 'loophole' that allowed it not detect root, but still have Xpose installed. I also use LuckyPatcher to mod/patch apks. I'll concede that it might have been a combination of them that allowed that it to work until i needed to reinstall Magisk. No foul, no harm.
Cheers,
AB
Click to expand...
Click to collapse
Do not discuss warez here. That is designed to steal from developers. This is a site for developers. You will be banned for discussing it here.

Tr4sHCr4fT said:
buy other phone for banking
Click to expand...
Click to collapse
Bro use RootCloak Xposed Module to hide Banking app from root and make it usable....

Cannot create work profile - Google Chat

Hi Guys. It's been a while since I've been here on XDA.
I've been trying to log in to Google Chat with my work google account but I am getting the error message "Cannot create work profile - The security policy prevents the creation of a work profile because a custom OS has been installed on this device."
I am not rooted but I am currently running hadesROM v11.0 with hadesKernel-v1.4. (I haven't installed any update for this ROM as I basically quit on modding my phone and was content with the features I have).
I guess, my question is - Is there a way to bypass this error and be able to login with my work google account without rooting or flashing stock ROM?
I am thinking on flashing stock ROM as a last ditch effort but I will be losing a lot of features from this custom ROM.
Any advise or input will be very much appreciated. Thank you!!
P.S. My Bixby button is also gone so I can't get to recovery unless I try to poke something in the button whole. HAHA.

butt. hole
heh :}
Jokes aside, you should check if Google SafetyNet is passing on your phone! You can download a simple SafetyNet Check App from the Play Store.
You unlocked the bootloader & modified the system, which triggers SafetyNet.
SafetyNet needs to pass, in order for some apps (Banking Apps, Google Pay) & some games (like Mario Kart Tour or Fortnite) to work.
If SafetyNet is triggered, you'll also stop seeing Netflix in the Play Store, and in the Play Store Settings, in the bottom it'll say "Device is not certified".
You can make SafetyNet pass (even with unlocked BL + modified system!), by using Magisk and enabling MagiskHide in its settings.

dreamytom said:
butt. hole
heh :}
Jokes aside, you should check if Google SafetyNet is passing on your phone! You can download a simple SafetyNet Check App from the Play Store.
You unlocked the bootloader & modified the system, which triggers SafetyNet.
SafetyNet needs to pass, in order for some apps (Banking Apps, Google Pay) & some games (like Mario Kart Tour or Fortnite) to work.
If SafetyNet is triggered, you'll also stop seeing Netflix in the Play Store, and in the Play Store Settings, in the bottom it'll say "Device is not certified".
You can make SafetyNet pass (even with unlocked BL + modified system!), by using Magisk and enabling MagiskHide in its settings.
Click to expand...
Click to collapse
Hi,
Thank you for your response.
Safetynet does pass and Play Store says it's certified.
My banking apps are also working fine so I managed to stay on this ROM for a long time.
Seems like I'll end up wiping my phone and try other ROMs or flash the stock firmware. I'll keep googling before Saturday comes.
Spoiler: Screen shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

pandadai00 said:
Hi,
Thank you for your response.
Safetynet does pass and Play Store says it's certified.
My banking apps are also working fine so I managed to stay on this ROM for a long time.
Seems like I'll end up wiping my phone and try other ROMs or flash the stock firmware. I'll keep googling before Saturday comes.
Spoiler: Screen shots
View attachment 5405963View attachment 5405965
Click to expand...
Click to collapse
Oof. Ok. As a last resort, you could try Magisk and its MagiskHide feature. In the app you can tell it to spoof to your specified apps.
Dunno if that'll work, but I'm mentioning it because you don't have to reset your system to install Magisk.
Apps can also look for folders like TWRP in phone storage, and then refuse to function. Mario Kart is one of those games that try to search for such folders.
So if you have folders or apps, that could reveal that you're running a modified system, pay attention to that.

dreamytom said:
Oof. Ok. As a last resort, you could try Magisk and its MagiskHide feature. In the app you can tell it to spoof to your specified apps.
Dunno if that'll work, but I'm mentioning it because you don't have to reset your system to install Magisk.
Apps can also look for folders like TWRP in phone storage, and then refuse to function. Mario Kart is one of those games that try to search for such folders.
So if you have folders or apps, that could reveal that you're running a modified system, pay attention to that.
Click to expand...
Click to collapse
Thanks for this. I will try your suggestions.

pandadai00 said:
Thanks for this. I will try your suggestions.
Click to expand...
Click to collapse
kool

Any luck?

Themes / Apps / Mods Magisk 24.1 zygisk and lsposed

Hi guys
Magisk 24.1 is running now with lsposed together (in A12 but perhaps also in A11)
Further more you can make screenshots in "screenshot unallowed apps"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

What is this deny list? My banking apps are detecting root and is not working. I've enabled Zygisk and enforced it. Added apps to deny list. Yet not working. Any idea

Hello,
I'm using LSPosed 1.7.2 Zygisk with Magisk v24.1 on Android 11 (LineageOS 18.1 on Xiaomi Mi A1) and "Disable FLAG_SECURE" 1.0.1 from lsposed.
I can select which apps to enable for this module clicking on module name and selecting apps.
I'm using "Deny List" on Magisk (disabling enforce) for hiding root (with Shamiko module).

arunsebstn said:
What is this deny list? My banking apps are detecting root and is not working. I've enabled Zygisk and enforced it. Added apps to deny list. Yet not working. Any idea
Click to expand...
Click to collapse
Rebooted after deny?
Cleaning app caches and dalvik caches an then reboot if not only reboot worked. Maybe you have to reset these apps and deny.... again

Laptapper said:
Rebooted after deny?
Cleaning app caches and dalvik caches an then reboot if not only reboot worked. Maybe you have to reset these apps and deny.... again
Click to expand...
Click to collapse
Made ok now. Actually missed to instal safety net pass module

arunsebstn said:
Made ok now. Actually missed to instal safety net pass module
Click to expand...
Click to collapse
Yep
on some ROM it's necessary.
I'm on Elixier and there's no safety net fix necessary.

Laptapper said:
Hi guys
Magisk 24.1 is running now with lsposed together (in A12 but perhaps also in A11)
Further more you can make screenshots in "screenshot unallowed apps"
View attachment 5538873
View attachment 5538851
View attachment 5538853View attachment 5538855View attachment 5538857
Click to expand...
Click to collapse
Which version of the comdirect app is working for you?
And it seems you are using Magisk canary.
Did you also get the comdirect Tan2Go working?

MikelFuchs said:
Which version of the comdirect app is working for you?
And it seems you are using Magisk canary.
Did you also get the comdirect Tan2Go working?
Click to expand...
Click to collapse
Newest Comdirect and newest photo tan.
Tan2go I didn't use
Yes newest canary

Half your DenyList isn't activated properly. Which means root isn't completely hidden from a lot of apps. Make sure to check all the boxes for each specific app.

arunsebstn said:
What is this deny list? My banking apps are detecting root and is not working. I've enabled Zygisk and enforced it. Added apps to deny list. Yet not working. Any idea
Click to expand...
Click to collapse
Do we need to enable Enforcing for the banking apps to work ? I saw in some video it needs to be disabled . Only adding to deny list shd work is told. I am confused . I am trying on the latest MiUiMix rom but still it detects root.

fxthomas said:
Do we need to enable Enforcing for the banking apps to work ? I saw in some video it needs to be disabled . Only adding to deny list shd work is told. I am confused . I am trying on the latest MiUiMix rom but still it detects root.
Click to expand...
Click to collapse
Yes enforcing is mandatory

嘿，我无法安装Zygisk-lspoed，我该怎么办？
我尝试过最新版本和更低版本
谢谢！

Lning142987 said:
嘿，我无法安装Zygisk-lspoed，我该怎么办？
我尝试过最新版本和更低版本
谢谢！
Click to expand...
Click to collapse
See post 1
Magisk 24.1 is running now with lsposed together (in A12 but perhaps also in A11)
Which phone and which ROM you have?
English forum....

....i thought this forum requires english?

opg2000 said:
....i thought this forum requires english?
Click to expand...
Click to collapse
This is why I've written to him
English forum....

opg2000 said:
....i thought this forum requires english?
Click to expand...
Click to collapse
.....sorry, this was pointed to "Lning142987"

Shamiko - How to add apps to blacklist ?

Hi,
I just discovered Shamiko which apparently is the successor of Riru-momohider and that it works in Zigysk mode.
I installed it on Magisk 24.1 and I activated the zigysk mode but I don't know how to add applications to hide.
On Riru-momohider it was enough to add them in the magiskhide list but it doesn't work anymore.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

geekborg said:
Hi,
I just discovered Shamiko which apparently is the successor of Riru-momohider and that it works in Zigysk mode.
I installed it on Magisk 24.1 and I activated the zigysk mode but I don't know how to add applications to hide.
On Riru-momohider it was enough to add them in the magiskhide list but it doesn't work anymore.
View attachment 5555053
Click to expand...
Click to collapse
Shamiko uses the app list from the Enforce DenyList, but to activate Shamiko, you have to disable Enforce DenyList itself. So: 1) Flash Shamiko on reboot, 2) enable Zygisk, enable Enforce DenyList and configure it - mark all the apps you want to hide root from, 3) DISABLE Enforce DenyList and reboot. Now on, Shamiko takes over the job

This is what i did but Shamiko does not gives me the list of hidden apps in its description text
Here is what I expected to get :
I added 4 apps to the list but I got :

geekborg said:
This is what i did but Shamiko does not gives me the list of hidden apps in its description text
Here is what I expected to get :
View attachment 5555645
I added 4 apps to the list but I got :
View attachment 5555647
Click to expand...
Click to collapse
In the latest Shamiko versions there is no indication about number of the blacklisted processes. It was removed for some reasons unknown to me, but from the second screenshot it is obvious that Shamiko is working fine for you.
By the way, if you want a user to be notified about your reply, you have to use "Reply" button directly in the previous message. I wasn't notified and almost forgot about your question

Lord Sithek said:
In the latest Shamiko versions there is no indication about number of the blacklisted processes. It was removed for some reasons unknown to me, but from the second screenshot it is obvious that Shamiko is working fine for you.
By the way, if you want a user to be notified about your reply, you have to use "Reply" button directly in the previous message. I wasn't notified and almost forgot about your question
Click to expand...
Click to collapse
shamiko method not working on the latest banking app since i accidentally update that app last night.

locolyric said:
shamiko method not working on the latest banking app since i accidentally update that app last night.
Click to expand...
Click to collapse
Shamiko isn't a universal solution for everything. It hides Zygisk traces, but there are many other things that a bank app can look for, like TWRP files, app with root access installed, USB debugging enabled, etc.

Lord Sithek said:
Shamiko isn't a universal solution for everything. It hides Zygisk traces, but there are many other things that a bank app can look for, like TWRP files, app with root access installed, USB debugging enabled, etc.
Click to expand...
Click to collapse
i found that latest app can be simply block by using v23 magisk hide ....but deny list can't stop it...

locolyric said:
i found that latest app can be simply block by using v23 magisk hide ....but deny list can't stop it...
Click to expand...
Click to collapse
use Shamiko along with Universal SafetyNet Fix and be happy

brenosnt said:
use Shamiko along with Universal SafetyNet Fix and be happy
Click to expand...
Click to collapse
not work for that app.
currently only v23 magisk hide is working.

Lord Sithek said:
Shamiko uses the app list from the Enforce DenyList, but to activate Shamiko, you have to disable Enforce DenyList itself. So: 1) Flash Shamiko on reboot, 2) enable Zygisk, enable Enforce DenyList and configure it - mark all the apps you want to hide root from, 3) DISABLE Enforce DenyList and reboot. Now on, Shamiko takes over the job
Click to expand...
Click to collapse
Sir jumping in as there isn't much reference to shamiko, but after that initial setup, what's the correct way to add new items to the deny list?
IE do I toggle magisks "enable denylist", do I reboot somewhere in between or...?

kenshinta said:
Sir jumping in as there isn't much reference to shamiko, but after that initial setup, what's the correct way to add new items to the deny list?
IE do I toggle magisks "enable denylist", do I reboot somewhere in between or...?
Click to expand...
Click to collapse
Reboot always welcome if you add new app to the list (although Im not sure if necessary). So just add an app to Configure DenyList and then reboot

[Solved by 208]Today's( Feb 26 2023) canary refused to open

Sorry if this is the wrong place for this. I haven't seen this reported yet.
First specs: Unlocked Pixel 6 Pro. February update. Only mods are systemless hosts and usnf 2.4.0 displax mod 1.2. No hide enabled. No google services in deny list.
Opened magisk today and saw there was a canary update. I ran the update. And magisk wouldn't open (flash on screen back to home). Only updated app not boot.
Tried to redeem by:
Reboot
emptying cache reboot (did not work)
Emptying data reboot (dnw)
Installing magisk stable from github reboot (generic app icon no open)
Install magisk last canary (had to go to apkmirror for it couldn't find it anywhere else, works but would rather use official source)
Anyone else experience this with today's? Bookmarked github will wait to update til it shows a further update (unless someone has help for me).

I had the same issue but with originally hidden magisk app.
I got back to the version before the update by removing the hidden magisk (long press, info, uninstall), uninstalled the new canary (same way) and then installed the last version (25206) again.
now it works, all modules are there, all settings are back.

Snow_ball said:
I had the same issue but with originally hidden magisk app.
I got back to the version before the update by removing the hidden magisk (long press, info, uninstall), uninstalled the new canary (same way) and then installed the last version (25206) again.
now it works, all modules are there, all settings are back.
Click to expand...
Click to collapse
Thank you for your input. Unfortunately doesn't help in my case as i didn't have a hidden magisk

Nergal di Cuthah said:
Thank you for your input. Unfortunately doesn't help in my case as i didn't have a hidden magisk
Click to expand...
Click to collapse
I still think it's a similar case - completely remove the magisk install and re-install the older version. not the 25207 canary

Snow_ball said:
I still think it's a similar case - completely remove the magisk install and re-install the older version. not the 25207 canary
Click to expand...
Click to collapse
Tried that got a generic android app icon and no open or do you mean uninstall from within magisk. Have a working 25206 right now, it looks like others had the same problem
Magisk app crashing on appstart (25207) · Issue #6637 · topjohnwu/Magisk
Context: The canary build has been installed and the app would immediate crash when clicked. Uninstalled and reinstalled to make sure it wasnt related to the app being hidden before, same thing hap...
github.com

Weirdly 207 debug works. I asked at github but does anyone know if next update will switch me back to non debug (which is what I'd prefer, because holy cow debug adds so much to the log, obviously)

208 dropped and all is well

Nergal di Cuthah said:
208 dropped and all is well
Click to expand...
Click to collapse
Not everything is well. You can't hide Magisk app under other package, Hide Option doesn't work. Some apps require Magisk to be hidden under other name.

matfcb said:
Not everything is well. You can't hide Magisk app under other package, Hide Option doesn't work. Some apps require Magisk to be hidden under other name.
Click to expand...
Click to collapse
I can confirm this. Magisk also lost the ability to install apps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
While not related to my bug, thus this topic, this should be brought up on the github
Edit i was looking in the wrong place for install apps permission. While hide still doesn't work installing from app works contrary to my stricken out comment

I went back to 25206, no big deal for now. That is what the Canary builds are.

dmarden said:
I went back to 25206, no big deal for now. That is what the Canary builds are.
Click to expand...
Click to collapse
Yeah (at the time) all i could find for 206 was apkmirror which cried about being not from official source. But I'm good on 208 so far