Database Develop

Can't unlock bootloader

I have tried over and over again to unlock the bootloader.
I've signed into my Mi Account, the same on both my PC (Mi Unlock Tool) and phone.
I installed the Xiaomi driver.
I click unlock, and then it gets to 99% before saying Unknown error (-1)
I've tried on two PCs, one AMD Ryzen 2nd gen, one Intel Core 6th gen.
After trying on the Intel PC, the phone is no longer detected by the Mi Unlock Tool, on both PCs
I really need help with this

What version? Try to another.

mar.ur said:
What version? Try to another.
Click to expand...
Click to collapse
I've tried Mi Unlock versions 3.5.1108.44 and 3.5.1128.45
Any recommended versions?

capitalists said:
I've tried Mi Unlock versions 3.5.1108.44 and 3.5.1128.45
Any recommended versions?
Click to expand...
Click to collapse
Try to 2.3.XXX
Check if your phone(fastboot mode) is detected in device manager as well.

mar.ur said:
Try to 2.3.XXX
Check if your phone(fastboot mode) is detected in device manager as well.
Click to expand...
Click to collapse
My phone always shows up on device manager as Android Bootloader Interface.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Whenever I connect my phone while MiFlash is open, the phone instantly exists the bootloader, but stays on the bootloader if I reconnect it.
Edit: I also tried MiFlash 2.3.803.10, but my phone is not detected there either.

IT FINALLY WORKED when I disabled device signature enforcement on Windows.
Thanks for the help guys.
EDIT: IT DIDN'T BLOODY WORK. The unlock tool said successfully unlocked. When I check on the phone and through typing 'fastboot oem device info'
it said the phone was not unlocked.
EDIT #2: All of a sudden it just worked on my Intel PC with the newest version of Mi Unock

s
capitalists said:
EDIT: IT DIDN'T BLOODY WORK. The unlock tool said successfully unlocked. When I check on the phone and through typing 'fastboot oem device info'
it said the phone was not unlocked
Click to expand...
Click to collapse
same hear brother please give me proper solution if you find

Question QCN backup / IMEI fix / Engineermode / Diag mode

Hi, I found working method for backing up QCN via QFIL (QPST). Also You can enable some modes for diagnostics and engineering/testing/unlocking vowifi or volte.
Firstly You need to Authokendecrypt after entering *#9434* using Oppo Free Unlocker or Secrecy Unlocker (easy to find on Google or xda in region change topics). Then enter *#649010# and to unlock any option You need to enter Confirm code which is 6776 and You are ready to go to backup or restore IMEI and many more. I will upload full list of Engineer Codes pulled out from firmware, just need to get to my pc. Feel free to ask questions, i will try to help. Maybe we can find out something interesting. Im digging to find a way to root or unlock bootloader ofcourse... Or at least how to change region to Vietnam or India to unlock via official deeptesting app.

Interresting thingy... any new findings?
Changing region doesn't help, also no DeepTesting in India or China :-(

To enter the Engineering Mode: dial *#899#
and the code is *#9434*

how to turn on vowifi? This option doesnt exist Anyway

Any 1 tried with Engineer mode togle on.
It puts a phone connected with PC to communicate with phone with specified driver
SDM720G-IDP Quallcomm driver ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This should be the way to diagnose a lot of stuff ...
SnapDragonMobile 720G ?

Damn, those VM ware drivers and windows machine
Didn't see it ...
Now doing the things I can ... repack without the check ... Will try ...
QPST is now enabled, finnaly ...
Flashing enabled without using tools
Thank you @matiirk , but will be nice if you point it out before ... To much of my time has passed almost 4 nothing.

Question rn note 4g (selenes) edl mode access point

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anyone knows point to access edl mode? I can't find out by googling

b990317 said:
anyone knows point to access edl mode? I can't find out by googling
Click to expand...
Click to collapse
If you have a MediaTek soc use:
https://devsjournal.com/how-to-unbrick-mediatek-device.html
Edl mode it's just for Qualcomm socs.

NOSS8 said:
If you have a MediaTek soc use:
https://devsjournal.com/how-to-unbrick-mediatek-device.html
Edl mode it's just for Qualcomm socs.
Click to expand...
Click to collapse
thanks, it's mediatek soc. but i'm not sure wether method of link would works because when i put cable on pc, it instantly repeats connecting and disconnecting.

b990317 said:
thanks, it's mediatek soc. but i'm not sure wether method of link would works because when i put cable on pc, it instantly repeats connecting and disconnecting.
Click to expand...
Click to collapse
check:
fully charged battery
Cable and usb port
Volume and power button not stuck (wd40).

b990317 said:
thanks, it's mediatek soc. but i'm not sure wether method of link would works because when i put cable on pc, it instantly repeats connecting and disconnecting.
Click to expand...
Click to collapse
Usually you don´t need to pinpoint a MediaTek, device, there are (or were) rare cases though. Actually you need to bypass SLAA/DA restrictions, to can enter to BROM mode, instance where you can use SPFT, to flash your device, read this guide https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377/, also, you have this https://github.com/bkerler/mtkclient, and to get device to BROM mode, if you are not confortable with the command line, you can use this tool https://ujuzitz.com/mtk-client-tool-v5-2-mediatek-all-in-one-tool-download/ notice that I didn't check how many reliable this site is, just take it as reference, or look for this tool in other sites.

Question stuck in fastboot loop(locked)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone is redmi note 11 4g(selenes). I followed this solution but I think I missed something. miflash unlock or miflash doesn't work cause phone is locked. I tried few solutions but it didn't work. Ist there any way to fix this?

b990317 said:
Phone is redmi note 11 4g(selenes). I followed this solution but I think I missed something. miflash unlock or miflash doesn't work cause phone is locked. I tried few solutions but it didn't work. Ist there any way to fix this?
Click to expand...
Click to collapse
If you linked your Mi account previously, then Mi Flash unlock tool has to work, if not, then, no way.
You can use SPFT at any time, no matter your device is locked or not, also you have this tool, be sure to properly install all the drivers needed, https://github.com/bkerler/mtkclient

b990317 said:
Phone is redmi note 11 4g(selenes). I followed this solution but I think I missed something. miflash unlock or miflash doesn't work cause phone is locked. I tried few solutions but it didn't work. Ist there any way to fix this?
Click to expand...
Click to collapse
Its doesn't matter for official tolls if its locked or not. Official tolls work with locked adn unlocked bootloaders.
You mentioned that you have "selenes" Redmi Note 11 4G which seems to be a china model. if its MTK device than SP flast tool is fine or else stuck to MI Flash only and check with the fastboot files.
Check the link as per the device mentioned -
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
You will need to extract the files using 7 ZIP till you get the image folders and try to flash it
If stuck share screen shots of the error message and make sure proper drivers are installed

If device won't enable change mode or ADB
Remove the back cover and disconnect the battery and reconnect it

Can't unlock my redmi 9c with miui unlock tool

I added my account to the Miui setting I don't understand why it is saying that i did not.
Redmi 9c
Windows 11
I am using miflash_unlock_en_7.6.602.42
did it glitch and not add it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

This is what i get when i use this tool:
https://imgur.com/JdGnD3v

I fixed it:
https://imgur.com/QyRLTte
now i need to wait 168 hours

jerios3 said:
I fixed it:
https://imgur.com/QyRLTte
now i need to wait 168 hours
Click to expand...
Click to collapse
Unlock it using mtk client without waiting

jerios3 said:
I fixed it:
https://imgur.com/QyRLTte
now i need to wait 168 hours
Click to expand...
Click to collapse
I tried to use a tool to bypass it no mtk client increased the time will mtk do the same?
it increased to 360 hours now i need to wait it out even longer.
Also the MTK tool failed! It did not work
338 hours need to wait rn

jerios3 said:
I tried to use a tool to bypass it no mtk client increased the time will mtk do the same?
it increased to 360 hours now i need to wait it out even longer.
Also the MTK tool failed! It did not work
338 hours need to wait rn
Click to expand...
Click to collapse
Please install Radmin VPN and USB Redirector Software so that I can remotely unlock bootloader of your phone.

mvikrant97 said:
Please install Radmin VPN and USB Redirector Software so that I can remotely unlock bootloader of your phone.
Click to expand...
Click to collapse
No thanks.I will wait it out and be patient.
but thanks for offering your help .

mvikrant97 said:
Please install Radmin VPN and USB Redirector Software so that I can remotely unlock bootloader of your phone.
Click to expand...
Click to collapse
Hi there when rooting my phone should I use TWRP or Pitch Black recovery project?
when I am planning installing Magisk.
Also should I use 'orange state disabler MTK Only' when installing on my redmi 9c non NFC version.
My model:M2006C3MT