Related
Hey again!
I apologize if this has been [kind of] covered and I've read through some of the other threads about skins, but I wanted to know if anyone has gotten a Casemate Vroom for their N1 and your thoughts?
I got a silicone case/screen protector from ebay, mad cheap (like $4), and it does the job, but I want to get something that looks nice as well. The screen protector I have on this works well, surprisingly, since it was paired with this cheap case, but I dropped the phone straight on its face today (just a flat plop, but it was only 1-2 feet) and the case did its job, but got me rethinking.
With that said, I like the look of the Vroom as it adds a little flare to the phone as well as functionality, so I wanted to see peoples' thoughts. Thanks!
If anyone has this, please let me know. I am really considering buying one, but I wanted feedback if anyone has this.
I have one. It's an ok case, here are my pros and cons:
Pro's:
- It's a good looking case, when it's not all dusty and covered with stuff ( see cons ).
- It will protect the phone well in the event of a drop.
- It's easy to grip.
Con's:
- It's rubber, so it attracts every piece of dust, lint, whatever may be around.
- The top portion actually blocks the light sensors of the phone so if you use the auto adjusting backlight it's not going to work. Also it doesn't shut the screen off when it's close to your face while on the phone, then illuminate it when you pull the phone away from your face. I thought about cutting this top piece off with a razor blade, but I haven't done it yet because I don't feel like making the case look like crap...
I'm a car guy, so that's the main reason I bought the case. I figured it would be sweet to use when I go to shows/track. That's probably the only time I will use it though.
Hope that helps you.
Is it really covering the sensor? the picture looks like it isnt...
Anyways OP check this case out, this is what I got, it fits perfectly, looks great, and cheap! Definitely the best bang for the buck.
The seller is pretty good by the way, I got my order in 3days.
http://cgi.ebay.com/HARD-CASE-SILIC...ewItem&pt=PDA_Accessories&hash=item5d28bb22ee
Also available in, blue, green and pink
I used this case for the first few weeks I owned the phone. I do really like the design of the case, however I found that after a few weeks it becomes loose due to the material used for it. Also, they have since released a new version in the past week that no longer covers the sensors, but in doing so it looks as if it reduces the area it covers on the phone. This worries me that due to the material used it may have issues with staying properly seated on the phone once the material has loosened. Another note on the material is that it is very grabby. By that I mean that if you put it into a pocket it is a little tough to take it back out. Other than that all of the proper areas are cut out and sit well.
I have since switched to their Gelli case which I now prefer. It is a harder material, and doesn't have the issue of stretching or loosening. It also shows off the phone more, as it is a clearer smoke style material.
Thanks for the feedback. I didn't realize that it covered the sensors (at least the pics on the website still show the old one). I'll take a look into the ones you've suggested. Thanks guys!
Yah , found out that the older version did cover the sensor. But the new ones don't.
mrmartin86 said:
Thanks for the feedback. I didn't realize that it covered the sensors (at least the pics on the website still show the old one). I'll take a look into the ones you've suggested. Thanks guys!
Click to expand...
Click to collapse
Just ordered one of these, it's the coolest looking case by far but I never ordered because of the proximity sensor being covered, seems they have fixed that now as there is a new version on their website so we'll see how it is when it gets here. It's the first case I'm actually looking forward to getting for the Nexus, just don't seem to be many stylish cases for it like there are for the iPhone.
This review is for the box available at my local Verizon Flagship store. The service representative explained that very few stores have them available so good luck finding them because this package makes the phone 3.5 times hotter.
Disclaimer:
The "Power and Protection Package" creates a beast of a device that may have you pushed against a wall by one or many of your friends if you do not keep quiet about the "coolness" of your phone.
hotter=cool
The box includes a shell/holster, vehicle charger and anti-glare display protectors (3). It was marked $49.97 and was reduced by 25 dollars with the help of a nice red sticker. (your experience may differ).
Out of the box comes a nice plastic sack holding the three screen protectors with a bubble pusher and a screen cleaning cloth. Place the proctector with extreme caution since it does not cover the entire glass. Instead, only the touch surface is blanketed leaving the navigation buttons exposed. It has a smooth gliding surface that will leave you breathless. No greasy fingers can make you stick to the glass or leave nasty fingerprints for your friends to laugh at. The surface allows plenty of "touch" before you even notice it has your identification all over it. Atrix, my ass. =)
Next to say hello to your dirty little hands is the double dipper, the holster/rear shell. This is a must for all you techo geeks that still like to impress the ladies. It is plastic with rubber and your only option for color is black. The shell protects the entire backside leaving the communication items releaved - buttons, camera, microphones, speaker, and media ports. One downside, it lacks coverage on the top and bottom of the exterior. The shell gives your hand comfort with its four line cross pattern. It also includes a kickstand that allows both vertical and horizontal viewing positions. -no protractor so hear my out =)- Vertically: perhaps a 70 degree angle; horizontally: around the 60's...
The holster has the same pattern and can only store the phone with screen facing inside. It protects the screen with a nice felt-like layer ontop of the plastic. Yes, it swivels.
And last, however never the least er used is the car charger. This is a common verizon charger with an extra usb port for your "other" gadgets. Use it, don't abuse it...
Now, go out and get your own so I am not the only owner of this cool computer with awsome accessories not readily available. =p
https://picasaweb.google.com/108466...authkey=Gv1sRgCOXX5_mRrte7qQE&feat=directlink
Ask if you want different or more pictures.
Hey, that's the same one I got! It works very good. I wish it could fit the extended battery though....
fefniir said:
Hey, that's the same one I got! It works very good. I wish it could fit the extended battery though....
Click to expand...
Click to collapse
The rear cover does not work but the screen cover fits to the thickness of the extended battey cover and still gives you screen protection and the swivel clip
Sounds like a pretty awesome combo. Only thing I never liked was the screen protectors that Verizon offers. The zagg has been released for the revo and they are starting to become widespread on eBay. I have mine installed and this far love it. Always been a big fan as I used it with my previous iPhones. The touch screen is still very responsive and it is still easy to see even outside in the bright sunlight. Only downside is you can't clean the screen without some sort of solvient as a microfiber or any other cloth seems to "grip" the screen when cleaning. Just use some monster cleaner (available at best buy) and you are ready to roll!
Sent from my VS910 4G using Tapatalk
I use cotton. Works well for me.
Sent from my VS910 4G using XDA Premium App
Ever since I purchased the M8, I've been wanting to get the Dot View cover because in pictures it looks so cool. I have also seen a lot of videos on YouTube and it definitely looked impressive, despite some of its downfalls which were pointed out in the videos but I thought I could live with them. When I went to the HTC store last night, I wanted to try it before buying it but that wasn't possible because the box is sealed and they didn't have any ones that were open, for instance, and for $60 USD it wasn't an easy decision to make since it's just a COVER! Anyways I decided to bite the bullet since I've always thought about buying it and just going ahead and doing it. As soon as I installed it on the device, I noticed the very first problem - the Glass screen protector I have installed causes it to not close properly.
The case has magnets that allow it to fully close on the screen, but the screen protector I have installed (which I am not going to remove for a cover) blocks it from doing that. The second thing I noticed is that the rubbery front makes it uncomfortable sliding it and out of your jeans' pockets whereas plastic or hard rubber makes it easier. The third is that it doesn't properly fold on the back since the HTC's back is not straight - I already knew about that problem from the videos but I didn't think it would be that annoying. Now you can barely type on the device unless you're an expert one-handed typer (which I definitely am not). It also makes it uncomfortable to play games and use the camera.
Last but not least, the Dot View itself is not as good as I expected it to be. It only shows the time and the weather in Celsius (22 degrees, for instance) but the text itself is far from being clear, I actually have to concentrate in order to make out the time and the weather. In the pictures the text looks very clear, but in person it is not at all. I have tried different themes, same thing. I'm starting to think I ended up with a couterfeit cover (but I highly doubt it since I bought it from the only authorized HTC reseller in Egypt and the case's box has the barcode on it and everything) but then again maybe the whole 8-bit, retro style text is the reason for that.
I came across an app called Dot View M8 Mods but unfortunately it is a paid-for version and my internet visa card expired and I'll have to wait for the renewal so I can buy it. All in all, I wouldn't recommend this case to anyone who actually uses the phone frequently throughout the day. I must say it makes it easier to answer/decline phone calls and of course it is very protective since it covers the front AND the back, but everything else could have been made much better. I must say that the M7's Flip Cover is a thousand times better than the M8's Dot View flip cover.
Thread Cleaned of the nonsense
Have you guys heard of the expression "If you don't have anything nice to say, don't say anything at all."? Well, that applies here as well.
In future, if you're annoyed or angered by what someone else has written and feel the need to reply in kind, I suggest you take some time away from your computer or mobile device and rethink what you're about to post.
If you still feel tempted, still don't post it as it will more than likely turn out worse for you.
I'm not saying you have to agree or be happy with what others write but constructive criticism exists for a reason.
Regards,
- KidCarter93
Forum Moderator
Well, i used it, and using it since 3 months now.... I had to remove the thick glass protector, yes, but i bought a 0.3 mm thickness Rhino shield, which is bit expensive, but a very good screen protector. The cover just sticks to it very well.
About the clarity, the text is properly aligned, as shown in the pics and youtube vidoes. No issues at all. If you don't select any theme for dot view, it will show the weather icon as well.
Holding the phone was a bit difficult for a day or 2, but now i have learnt the technique.... Clip the cover with 2 fingers, you get to hold the mobile easily. The rubber finish on top is good actually, and can be cleaned easily with some solutions to give it a brand new look.
The only downside of this cover is its price.
actualy, i thought the price was really good:
it came free with my phone
as a novelty its fun and everyone thats seen it so far has been really impressed.
practically, when its on the phone it does provide a nice grippy feel and its nice to flip it open with one hand for a quick check.
it will provide protection from tiny scratches on the back but also its really annoying when its on the desktop and i want to actually do something.
when its folded back on the desk and in landscape mode it wobbles like its on springs and is impossible to type on.
i always end up just removing the case. luckily its really to remove and hopefully will survive being removed many times.
it is good that i can remove it without unplugging the usb
having used it for a week now i would not buy one.
its a good idea that needs a mark 2 still with some means of flipping closed also folding back solid as a desk stand.
my 2c.
How can you make the weather icon to show because mine is not showing up on my dot view case
scorror said:
How can you make the weather icon to show because mine is not showing up on my dot view case
Click to expand...
Click to collapse
Settings > Personalize > Dot View > Theme > None.
Sent from my HTC One_M8 using Tapatalk
I got the dot view and also very not pleased.
First of all - it's not even a good protector. The sides are completely exposed and the aluminum scratches very easily, but obviously you know that if you're gonna opt for a slim case like this.
The real problem is that the flip cover doesn't really close all that well, it remains a bit 'lifted' (may have to do with my thick Zagg Glass screen protector, but it's still an annoyance) - which in turn means that to use the dot-view features I have to push down the flip cover and operate it with another finger. That by itself pretty much defeats the purpose of the feature.
The dot-case features are actually not bad (especially when coupled with the relevant Xposed mods), but the case itself is a disaster.
I would love to see a 3rd party case that actually offers good protection, a better flip cover - and the dot interface (shouldn't be that hard to achieve).
I agree with all your points. I have a thick glass screen protector installed and it makes it impossible to close it the flip itself. I found those Xposed Mods you're talking about but they seem to no longer work (or is it just me?). I am talking about this one specifically: http://repo.xposed.info/module/com.mohammadag.dotviewmodsforhtcmate
https://play.google.com/store/apps/details?id=com.mohammadag.dotviewmodsforhtcmateunlockkey&hl=en
Whenever I attempt to use it, it tells me that I have a modified HTC Dot View APK and I need to remove it and redownload the stock one from PlayStore, which I have done several times to no avail. I'd love to have those extra features if possible?
TarekElsakka said:
I agree with all your points. I have a thick glass screen protector installed and it makes it impossible to close it the flip itself. I found those Xposed Mods you're talking about but they seem to no longer work (or is it just me?). I am talking about this one specifically: http://repo.xposed.info/module/com.mohammadag.dotviewmodsforhtcmate
https://play.google.com/store/apps/details?id=com.mohammadag.dotviewmodsforhtcmateunlockkey&hl=en
Whenever I attempt to use it, it tells me that I have a modified HTC Dot View APK and I need to remove it and redownload the stock one from PlayStore, which I have done several times to no avail. I'd love to have those extra features if possible?
Click to expand...
Click to collapse
Strange, it works fine for me.
Try this one.
That said, it's useless with the case being this.... flimsy.
I tried installing it but it says app not installed.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
TOAST
Note: all pictures are hidden inside spoiler tags. Pictures are not downsized. All pictures and videos were shot on my old Galaxy S6. Videos will be 1080p 60fps (installation) and 4K (end result).
A little bit of a personal background on me first. I am a repair tech for a Houston-based phone/tablet/computer repair shop. I have been doing this for over two years, and I have seen and fixed just about everything imaginable. Phones with cases, skins, and screen protectors, and those without. Tablets with cases, skins, screen protectors, etc. You get the idea. I know exactly what kind of protection every type of material can provide, be it TPU, polycarbonate, silicon, and others.
Let me start off by saying that I have never encountered actual real wood in a protective or decorative scene before. Faux wood, sure. But not real wood (not counting the wooden backs on the Moto X here, since they're part of the actual device). I hadn't even heard of Toast before this first post here almost two weeks back. Let me tell you, the second I found my way to their homepage, I was captivated. I had never thought something like this would even exist. It's brilliant. I spent the next two hours watching every YouTube video I could that showed off these "skins". I use the word skin lightly, here. This is the only skin that I would say provides real protection. But I'll touch on that later.
I received a full set of a style of my choice with the option of a design. I decided on Walnut with no design. I figured most people would choose it this way, and personally I find it the most attractive.
First, the packaging. The skin is shipped via USPS first class, inside a small and nigh-indestructible cardboard box. Not cheap UPS-style cardboard, but that solid white American ****. You can see for yourself below. Everything was snuggled neatly inside paper gift wrapping. I had a shipping confirmation on 11/12, and it got to my apartment on 11/16.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm waiting on the videos I took of the skin installation to upload and process on YouTube, and I'll embed that below as soon as I have it ready. I need to cut out a lot of wasted time and replace the audio, but I'll have it ready in a few days I hope. By the end of the weekend, worse case.
*edit, 11/21/2015*
Here's the installation video:
But, words will have to do for now. I started by installing the back. It was very easy to simply line up the camera, fingerprint scanner, LED flash, and laser focus. The corners, sides, and camera folds all folded up/down nicely. Next I installed the right side with the buttons. That was also as simple as the back, just line up the buttons and you're good to go. After that I did the top, then left, then bottom. Things were going smoothly until the bottom. The part that goes over/around the 3.5mm headphone jack and microphone, at least for my set, seem to be shifted 1 mm too far to the left (towards the USB C port). I'm not sure if the laser cutter became misaligned or what happened there. It's not a fatal flaw, the microphone hole and 3.5mm jack are still totally open and accessible, they're just shifted a little bit. They didn't square up perfectly with the back and the right piece. You'll see what I mean with the pictures below. Finally, we have the buttons and camera cover. You'll be able to see how those are packed once the video is ready. Again with these, there may have been an issue with the laser cutter. The longest sides of the power and volume buttons, along with the sim tray, were cut properly, whereas the short sides were only cut with the laser through what appeared to be most of the wood. You'll see this in the video as well, but I had to take a razor blade to these parts to separate them from the packaging. The buttons all turned out fine, but if you don't have anything tiny and sharp around, you would likely break the buttons. The camera cutout did not suffer from this problem.
Here now are some HD pictures of the finished installation. I was sent a front cover along with the back and sides, but I decided to keep my tempered glass screen protector installed on top and not the wooden skin. It is definitely possible to install the skin on top of the tempered glass, but that would raise it a far amount off of the phone. To me, it wouldn't look as good like that. If I had a thin film protector, I would go ahead and install the skin on that, but I would not install it on tempered glass. Just my two cents there.
Now, for my thoughts after the installation. The feel of real wood is much better than polycarbonate. You can immediately feel the change in grip. The texture of everything looks and feel perfect, just like real stained walnut. Hell, it even smells like it. I'm going to get weird looks from people seeing me smelling my phone now. Points off for that (kidding). The way the back bevels itself into the sides make it a little more comfortable, too. The buttons are pretty tactile, just about as much as without the skin. My volume buttons seem to be a little mushier, but that's probably because I cut it out of the packaging myself. I will say though that since even 12 hours later, the buttons feel a little better, so we'll see how that plays out. The power button is just as clicky as ever. I really like how the skin raises above the tip of the camera lens, I have always hated (hate is such a strong word) putting my phone back-down on rough surfaces because of it. The opening for the USB C port is plenty big, and should fit even the largest chargers (I'm looking at you, cheap cables).
And finally, my thoughts on protection. By no means is this an Otterbox replacement. Time will tell if this can substitute thing cases like the Spigen Thin Fit (which I was previously using). Without a doubt though, this skin can provide minimal basic protection. Since it is actually real wood, I can see it providing some impact protection on the corners. The wood should cave in first before it starts to put too much stress on the housing. Now, don't expect it to save you if you drop it onto tile or concrete from 3 or 5 feet up. But I can see it providing decent if not good protection from a small drop, like slipping out of your pocket when sitting down.
Finished results video:
Do you like wood? Damn right you like wood. Do you not want a case, even though you've used one for years despite the fact you have never dropped or broken a phone? Buy. Buy buy buy. It's going on all of my future devices.
I just got mine as well and will add my $.02 to your excellent review.
I also had a slight misalignment for one of the wrap pieces but mine occurred between the top and the left side. It's about a 1 mm gap so not really that noticeable, but will be curious to see if it snags pockets over time and pulls away. It also took a very bright light (and for a 48 year old reading glasses) to make sure the top microphone holes aligned. My only other installation issue was even with using a blade to help cut out the small cover punchouts, the sim card cover broke above the removal hole since it is such a thin piece there. If they could fully cut around those pieces with their lasers so they came off with the adhesive backing that would make it much easier and less likely to break. I've also noticed a slight lifting on a couple of the backs corner wrap pieces, once again it will be worth seeing if they become a snag hazard and potentially get pulled away. But overall installation was easier then most screen protectors I've put on.
Post install, a couple of items to note. I came off an Adopted case so this skin is definitely much slicker. It does feel when I'm retrieving it from my car mount or grabbing it quickly off my desk that it might slip out of my hand and given the minimum protection hitting the pavement may not survive (thank goodness for Google insurance The other issue I've had post-install is getting my headphones to seat well in the 3.5 mm jack. As noted in other threads, you need them in pretty tight to get connections and the first time I put mine in (I use the Bose QuietComforts) they didn't seat right and I had to really push on them to get them to connect. We'll see if things shift a little over time and it gets easier.
That all said, I'm very happy with the overall look and would definitely buy one again.
dpwhitty11 said:
TOAST
Note: all pictures are hidden inside spoiler tags. Pictures are not downsized. All pictures and videos were shot on my old Galaxy S6. Videos will be 1080p 60fps (installation) and 4K (end result).
A little bit of a personal background on me first. I am a repair tech for a Houston-based phone/tablet/computer repair shop. I have been doing this for over two years, and I have seen and fixed just about everything imaginable. Phones with cases, skins, and screen protectors, and those without. Tablets with cases, skins, screen protectors, etc. You get the idea. I know exactly what kind of protection every type of material can provide, be it TPU, polycarbonate, silicon, and others.
Let me start off by saying that I have never encountered actual real wood in a protective or decorative scene before. Faux wood, sure. But not real wood (not counting the wooden backs on the Moto X here, since they're part of the actual device). I hadn't even heard of Toast before this first post here almost two weeks back. Let me tell you, the second I found my way to their homepage, I was captivated. I had never thought something like this would even exist. It's brilliant. I spent the next two hours watching every YouTube video I could that showed off these "skins". I use the word skin lightly, here. This is the only skin that I would say provides real protection. But I'll touch on that later.
I received a full set of a style of my choice with the option of a design. I decided on Walnut with no design. I figured most people would choose it this way, and personally I find it the most attractive.
First, the packaging. The skin is shipped via USPS first class, inside a small and nigh-indestructible cardboard box. Not cheap UPS-style cardboard, but that solid white American ****. You can see for yourself below. Everything was snuggled neatly inside paper gift wrapping. I had a shipping confirmation on 11/12, and it got to my apartment on 11/16.
I'm waiting on the videos I took of the skin installation to upload and process on YouTube, and I'll embed that below as soon as I have it ready. I need to cut out a lot of wasted time and replace the audio, but I'll have it ready in a few days I hope. By the end of the weekend, worse case.
But, words will have to do for now. I started by installing the back. It was very easy to simply line up the camera, fingerprint scanner, LED flash, and laser focus. The corners, sides, and camera folds all folded up/down nicely. Next I installed the right side with the buttons. That was also as simple as the back, just line up the buttons and you're good to go. After that I did the top, then left, then bottom. Things were going smoothly until the bottom. The part that goes over/around the 3.5mm headphone jack and microphone, at least for my set, seem to be shifted 1 mm too far to the left (towards the USB C port). I'm not sure if the laser cutter became misaligned or what happened there. It's not a fatal flaw, the microphone hole and 3.5mm jack are still totally open and accessible, they're just shifted a little bit. They didn't square up perfectly with the back and the right piece. You'll see what I mean with the pictures below. Finally, we have the buttons and camera cover. You'll be able to see how those are packed once the video is ready. Again with these, there may have been an issue with the laser cutter. The longest sides of the power and volume buttons, along with the sim tray, were cut properly, whereas the short sides were only cut with the laser through what appeared to be most of the wood. You'll see this in the video as well, but I had to take a razor blade to these parts to separate them from the packaging. The buttons all turned out fine, but if you don't have anything tiny and sharp around, you would likely break the buttons. The camera cutout did not suffer from this problem.
Here now are some HD pictures of the finished installation. I was sent a front cover along with the back and sides, but I decided to keep my tempered glass screen protector installed on top and not the wooden skin. It is definitely possible to install the skin on top of the tempered glass, but that would raise it a far amount off of the phone. To me, it wouldn't look as good like that. If I had a thin film protector, I would go ahead and install the skin on that, but I would not install it on tempered glass. Just my two cents there.
Now, for my thoughts after the installation. The feel of real wood is much better than polycarbonate. You can immediately feel the change in grip. The texture of everything looks and feel perfect, just like real stained walnut. Hell, it even smells like it. I'm going to get weird looks from people seeing me smelling my phone now. Points off for that (kidding). The way the back bevels itself into the sides make it a little more comfortable, too. The buttons are pretty tactile, just about as much as without the skin. My volume buttons seem to be a little mushier, but that's probably because I cut it out of the packaging myself. I will say though that since even 12 hours later, the buttons feel a little better, so we'll see how that plays out. The power button is just as clicky as ever. I really like how the skin raises above the tip of the camera lens, I have always hated (hate is such a strong word) putting my phone back-down on rough surfaces because of it. The opening for the USB C port is plenty big, and should fit even the largest chargers (I'm looking at you, cheap cables).
And finally, my thoughts on protection. By no means is this an Otterbox replacement. Time will tell if this can substitute thing cases like the Spigen Thin Fit (which I was previously using). Without a doubt though, this skin can provide minimal basic protection. Since it is actually real wood, I can see it providing some impact protection on the corners. The wood should cave in first before it starts to put too much stress on the housing. Now, don't expect it to save you if you drop it onto tile or concrete from 3 or 5 feet up. But I can see it providing decent if not good protection from a small drop, like slipping out of your pocket when sitting down.
Do you like wood? Damn right you like wood. Do you not want a case, even though you've used one for years despite the fact you have never dropped or broken a phone? Buy. Buy buy buy. It's going on all of my future devices.
Click to expand...
Click to collapse
Thank you so much for the in-depth review, and sorry to hear of the alignment issue! Looking at the picture #2 of the Toasted 5X, it appears that that side wrap is a little low. I suggest (and thought it was mentioned in the instructions) using the scorelines of the actual back cover to align the sides. The ports may not be perfectly centered within the cutouts, but they should all be fully functional. We have a "butterfingers" replacement policy on everything, so if you'd like another set of wraps, just shoot an email to [email protected] referencing your order.
In regards to the sim/button covers, it's best to peel the paper off and then push them through the little slots. Those guys can be tricky to get the laser to cut all the way through, but our QA should have caught them in the production process. We'll gladly send replacements any time!
Thanks again, and enjoy your Toasted 5X!
---------- Post added at 11:31 PM ---------- Previous post was at 11:19 PM ----------
rgerrans said:
I just got mine as well and will add my $.02 to your excellent review.
I also had a slight misalignment for one of the wrap pieces but mine occurred between the top and the left side. It's about a 1 mm gap so not really that noticeable, but will be curious to see if it snags pockets over time and pulls away. It also took a very bright light (and for a 48 year old reading glasses) to make sure the top microphone holes aligned. My only other installation issue was even with using a blade to help cut out the small cover punchouts, the sim card cover broke above the removal hole since it is such a thin piece there. If they could fully cut around those pieces with their lasers so they came off with the adhesive backing that would make it much easier and less likely to break. I've also noticed a slight lifting on a couple of the backs corner wrap pieces, once again it will be worth seeing if they become a snag hazard and potentially get pulled away. But overall installation was easier then most screen protectors I've put on.
Post install, a couple of items to note. I came off an Adopted case so this skin is definitely much slicker. It does feel when I'm retrieving it from my car mount or grabbing it quickly off my desk that it might slip out of my hand and given the minimum protection hitting the pavement may not survive (thank goodness for Google insurance The other issue I've had post-install is getting my headphones to seat well in the 3.5 mm jack. As noted in other threads, you need them in pretty tight to get connections and the first time I put mine in (I use the Bose QuietComforts) they didn't seat right and I had to really push on them to get them to connect. We'll see if things shift a little over time and it gets easier.
That all said, I'm very happy with the overall look and would definitely buy one again.
Click to expand...
Click to collapse
Thank you so much for the feedback! As I'd told OP, in his second picture of the Toast 5X, it appears that his side wrap is a little low. I suggest (and thought it was mentioned in the instructions) using the scorelines of the actual back cover to align the sides. The ports may not be perfectly centered within the cutouts, but they should all be fully functional.
With the sim/button covers, it's best to peel the paper off and then push them through the little slots. Those guys can be tricky to get the laser to cut all the way through, but our QA should have caught them in the production process. We'll gladly send replacements any time. We even have a "butterfingers" replacement policy on the actual covers; just send a picture of the misaligned cover and we send a replacement. Please shoot an email to [email protected] referencing your order and we'll send another set of buttons, as well as wraps, if necessary.
Thanks again, and enjoy your Toasted 5X!
Looks really nice but it's a shame that they don't have mahogany, dark reddish wood alá art deco..
So I had one of these toast covers a few years ago on my Nexus 5. Sure they're ok for the feel and all but the adhesive they use picks up a lot of lint from pockets, general dust etc.
If not for that, I may consider them again.
LAURCORE said:
Thank you so much for the feedback! As I'd told OP, in his second picture of the Toast 5X, it appears that his side wrap is a little low. I suggest (and thought it was mentioned in the instructions) using the scorelines of the actual back cover to align the sides. The ports may not be perfectly centered within the cutouts, but they should all be fully functional.
With the sim/button covers, it's best to peel the paper off and then push them through the little slots. Those guys can be tricky to get the laser to cut all the way through, but our QA should have caught them in the production process. We'll gladly send replacements any time. We even have a "butterfingers" replacement policy on the actual covers; just send a picture of the misaligned cover and we send a replacement. Please shoot an email to [email protected] referencing your order and we'll send another set of buttons, as well as wraps, if necessary.
Thanks again, and enjoy your Toasted 5X!
Click to expand...
Click to collapse
On the alignment, it's tight on the power button side, just 1 mm short of full wrap and/or the sim card side is just short of coming up high enough. Thanks for the offer on the replacement but it's such a small piece that snapped off that it's barely noticeable and not worth the effort to replace.
For me the bigger issue is turning out to be the size of the 3.5mm audio cutout. I can't get my Bose to get a secure connection. Unfortunately, it looks like the only way to get the opening big enough would be to actually take it into the first bend cut since the Bose plug cover is 6mm in diameter vs. what looks like a 5mm cutout now. Not sure if that's even an option? May have to see if I can cut back part of the plug cover on the Bose.
Other then that, still liking the cover. No issues with snagging or extra lint pickup from the small side gap or any of the corner cuts.
I was thinking of picking one up for my 6p and debating one for my 5x. I kinda like leaving my 5x naked.
If I were to get it I would for sure get it engraved with the nexus logo text across the back. You can request this as they can't put it as an option on the site due to trademark. You select the custom text engravings option ($5 more) and then in the custom text field write: "Nexus etching" or "X etching" (for the X in nexus only) as the custom text.
My videos have processed and are live on YouTube. I've embedded them into the first post.
littleguevara said:
So I had one of these toast covers a few years ago on my Nexus 5. Sure they're ok for the feel and all but the adhesive they use picks up a lot of lint from pockets, general dust etc.
If not for that, I may consider them again.
Click to expand...
Click to collapse
There's typically a little bit of exposed adhesive around the edges, but this should never be an issue after a few days of use. We always tell people to just leave it be and it will go away on it's own. :good:
---------- Post added at 08:28 PM ---------- Previous post was at 08:25 PM ----------
ElecTriX666 said:
Looks really nice but it's a shame that they don't have mahogany, dark reddish wood alá art deco..
Click to expand...
Click to collapse
Sorry for the disappointment, but we plan on adding a cherry wood this Spring!
---------- Post added at 08:30 PM ---------- Previous post was at 08:28 PM ----------
graffixnyc said:
I was thinking of picking one up for my 6p and debating one for my 5x. I kinda like leaving my 5x naked.
If I were to get it I would for sure get it engraved with the nexus logo text across the back. You can request this as they can't put it as an option on the site due to trademark. You select the custom text engravings option ($5 more) and then in the custom text field write: "Nexus etching" or "X etching" (for the X in nexus only) as the custom text.
Click to expand...
Click to collapse
Thanks for sharing the Nexus etching info, and you won't regret Toasting them!
---------- Post added at 08:37 PM ---------- Previous post was at 08:30 PM ----------
dpwhitty11 said:
My videos have processed and are live on YouTube. I've embedded them into the first post.
Click to expand...
Click to collapse
Excellent video - thanks again! Those button covers were definitely underscored by the laser... don't know how that passed through QA. Please let me know if you'd like a replacement set of wraps & buttons!
So, a little update for me here.
I have, to my own disappointment, dropped my phone. It slid out of my pocket when I was getting into my Jeep and fell onto a parking lot. The skin performed just as I thought! The wood caved/dented in where the impacts were. There is no actual damage to my phone. A++.
Another note, we have finally had some colder days here in Houston. Because the skin is real wood, the ambient air temperature and relative humidity factor into the grippiness of the skin. It is definitely much more slippery in colder & drier weather, about as slick as an iPhone 6 (at least that's what I would compare it to).
dpwhitty11 said:
So, a little update for me here.
I have, to my own disappointment, dropped my phone. It slid out of my pocket when I was getting into my Jeep and fell onto a parking lot. The skin performed just as I thought! The wood caved/dented in where the impacts were. There is no actual damage to my phone. A++.
Another note, we have finally had some colder days here in Houston. Because the skin is real wood, the ambient air temperature and relative humidity factor into the grippiness of the skin. It is definitely much more slippery in colder & drier weather, about as slick as an iPhone 6 (at least that's what I would compare it to).
Click to expand...
Click to collapse
Thanks for the update. In general, would you say the wooden toast skin is more or less slippery than the naked device?
These look amazing. I'm thinking about getting the darkest (teak?) one for my 5X. Just had a quick question. I use a Mountek magnetic phone holder in my car. What I currently do is put the thinner of the two metallic "badges" (that hold the phone to the magnetic mount) under my phone's case. Do you think it would it work to do the same under the Toast skin? I don't have calipers, but the piece of metal is quite thin.
Great review thanks!
bblzd said:
Thanks for the update. In general, would you say the wooden toast skin is more or less slippery than the naked device?
Click to expand...
Click to collapse
Can you use the skin without the button covers? I like cases/skins that keep the buttons free or is the thickness too much and the buttons are lower than the wood?
bblzd said:
Thanks for the update. In general, would you say the wooden toast skin is more or less slippery than the naked device?
Click to expand...
Click to collapse
Here in Houston, I'd say (generally) more grippy. But like I said, once it got cold and less humid, it easily became more slippery.
bkjones88 said:
These look amazing. I'm thinking about getting the darkest (teak?) one for my 5X. Just had a quick question. I use a Mountek magnetic phone holder in my car. What I currently do is put the thinner of the two metallic "badges" (that hold the phone to the magnetic mount) under my phone's case. Do you think it would it work to do the same under the Toast skin? I don't have calipers, but the piece of metal is quite thin.
Click to expand...
Click to collapse
I use a similar kind of magnetic mount. I have mine just stuck right on the back. If the magnet is strong enough it should be okay.
radeon962 said:
Can you use the skin without the button covers? I like cases/skins that keep the buttons free or is the thickness too much and the buttons are lower than the wood?
Click to expand...
Click to collapse
You could, but they're basically flush with the skin. It would be pretty hard to press.
Does the camera lens ring affect light going into it? That's my only concern, as this phone is marketed with more light capturing capabilities.
ShishkaBerry said:
Does the camera lens ring affect light going into it? That's my only concern, as this phone is marketed with more light capturing capabilities.
Click to expand...
Click to collapse
Not a bit.
Sent from my Nexus 5X using Tapatalk
dpwhitty11 said:
Not a bit.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Sweet! I've been working on a custom case design since yesterday, the first time I've ever used photoshop lol. The fingerprint sensor looks like a full moon to me, so I'm thinking forest treeline with orion constellation above it on ebony. Currently waiting for the ice blue 5X, just ordered it Friday.
dpwhitty11 said:
You could, but they're basically flush with the skin. It would be pretty hard to press.
Click to expand...
Click to collapse
I ended up just trimming the opening for the buttons with an Exacto knife so that I could leave the buttons bare.
Just a quick update to my experience with my Toast cover. Unfortunately, after 7 months I had to take it off. The cover on the power button had slowly chipped off (kept snagging on my pocket) down to the point it was difficult to press and a couple of the corner curve pieces had snapped off. Fortunately using a hair dryer helped it come off with no leftover adhesive.
Hi to all,
Wanted to ask if someone has this case.
https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty
I ordered it ( 26 July) and still waiting.
How it looks, and if its comfortable to use it daily at office
Thanks
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
thedavefitzy said:
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
Click to expand...
Click to collapse
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
I found this one
But would like to hear more, from someone hier
Hier some comments :
vivek 8 said:
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
Click to expand...
Click to collapse
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Sakisgre said:
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Click to expand...
Click to collapse
no problems typing. very slick. case double thickness of phone. front is thin film. sharp knock on phone by edge of the table will crack the screen. but brilliant piece of engineering. love it.
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
tsiglas said:
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
Click to expand...
Click to collapse
No problem with sensitivity.
Sent from my SM-G935V using XDA-Developers mobile app
https://smile.amazon.com/s/ref=nb_s...mic+2.0,aps,196&rh=i:aps,k:ghostek+atomic+2.0
not many good reviews on Amazon regarding this brand and case. It does look awesome though.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Sakisgre said:
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Click to expand...
Click to collapse
Ordered through mobilefun.com and took about 1 week when they had stock available.
Sent from my SM-G935V using XDA-Developers mobile app
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Uodate #2
Seems I forgot I still had the AT TGSP and for now no sensitivity issues at all and not like the Proglass has occurred. Will update if it does but for now this would be my combination of screen protector and case.
Sent from my SM-G935V using XDA-Developers mobile app
s.lanso said:
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Click to expand...
Click to collapse
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Sakisgre said:
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Click to expand...
Click to collapse
No it is not really necessary but as others mentioned this is plastic. But I feel that phone is safer if screen is protected by Tempered glass than films or plastic films. As there's no big lip on front and only thing protecting front the the plastic film I just rather be protected than not be.
Sent from my SM-G935V using XDA-Developers mobile app
Hello, Want to update on the case as you read my other post mentioning some openings on the home and earpiece, seems that was a faulty case as was missing films for the waterproofing that it supposed to protect.
Seems my first one was missing the films that go in the earpiece and home button so wasn't fully waterproof but had no sensitivity issues, the next one had high sensitivity issues on the top area where the first one didn't. Ghostek has been nice and quick in sending replacements and honoring their warranties. Right now I have the first one installed until I received the third case. As there is no sensitivity issues.
I did drop the phone from about 4.2 ft high with no damage. The phone fell front side. I do have a tempered Glass installed and no difference with or without on sensitivity. There does not seem to be any damage on the phone or case. The drop was accidental and kind of scary as well when it fell face front. Even though it was on a case. But glad I had the setup I had.
The only drawback I see is that with fingerprints I don't have a problem with the one with no films(1st case) but with the films on(2nd Case) the best way for it to read is putting your finger side ways. Which works all the time when you put your finger sideways but when upwards is a small chance that it would detect or not.
Just received mine today. Spotty fingerprint scanner, the screen has the little dots all over when you shine lights on it or are out in the sun, definitely a loss in touch sensitivity due to the front film not touching the screen unless you press down on it.
Hello friends, my question is, is that possible to call someone while using this case?
dyba83 said:
Hello friends, my question is, is that possible to call someone while using this case?
Click to expand...
Click to collapse
I've had no problems when I have good reception. The only times I have problems is when I have 1x when outside in small areas plus work truck kind of blocks signals.
But regular use with not problems on signal, I haven't had any complaints.