Ever since I purchased the M8, I've been wanting to get the Dot View cover because in pictures it looks so cool. I have also seen a lot of videos on YouTube and it definitely looked impressive, despite some of its downfalls which were pointed out in the videos but I thought I could live with them. When I went to the HTC store last night, I wanted to try it before buying it but that wasn't possible because the box is sealed and they didn't have any ones that were open, for instance, and for $60 USD it wasn't an easy decision to make since it's just a COVER! Anyways I decided to bite the bullet since I've always thought about buying it and just going ahead and doing it. As soon as I installed it on the device, I noticed the very first problem - the Glass screen protector I have installed causes it to not close properly.
The case has magnets that allow it to fully close on the screen, but the screen protector I have installed (which I am not going to remove for a cover) blocks it from doing that. The second thing I noticed is that the rubbery front makes it uncomfortable sliding it and out of your jeans' pockets whereas plastic or hard rubber makes it easier. The third is that it doesn't properly fold on the back since the HTC's back is not straight - I already knew about that problem from the videos but I didn't think it would be that annoying. Now you can barely type on the device unless you're an expert one-handed typer (which I definitely am not). It also makes it uncomfortable to play games and use the camera.
Last but not least, the Dot View itself is not as good as I expected it to be. It only shows the time and the weather in Celsius (22 degrees, for instance) but the text itself is far from being clear, I actually have to concentrate in order to make out the time and the weather. In the pictures the text looks very clear, but in person it is not at all. I have tried different themes, same thing. I'm starting to think I ended up with a couterfeit cover (but I highly doubt it since I bought it from the only authorized HTC reseller in Egypt and the case's box has the barcode on it and everything) but then again maybe the whole 8-bit, retro style text is the reason for that.
I came across an app called Dot View M8 Mods but unfortunately it is a paid-for version and my internet visa card expired and I'll have to wait for the renewal so I can buy it. All in all, I wouldn't recommend this case to anyone who actually uses the phone frequently throughout the day. I must say it makes it easier to answer/decline phone calls and of course it is very protective since it covers the front AND the back, but everything else could have been made much better. I must say that the M7's Flip Cover is a thousand times better than the M8's Dot View flip cover.
Thread Cleaned of the nonsense
Have you guys heard of the expression "If you don't have anything nice to say, don't say anything at all."? Well, that applies here as well.
In future, if you're annoyed or angered by what someone else has written and feel the need to reply in kind, I suggest you take some time away from your computer or mobile device and rethink what you're about to post.
If you still feel tempted, still don't post it as it will more than likely turn out worse for you.
I'm not saying you have to agree or be happy with what others write but constructive criticism exists for a reason.
Regards,
- KidCarter93
Forum Moderator
Well, i used it, and using it since 3 months now.... I had to remove the thick glass protector, yes, but i bought a 0.3 mm thickness Rhino shield, which is bit expensive, but a very good screen protector. The cover just sticks to it very well.
About the clarity, the text is properly aligned, as shown in the pics and youtube vidoes. No issues at all. If you don't select any theme for dot view, it will show the weather icon as well.
Holding the phone was a bit difficult for a day or 2, but now i have learnt the technique.... Clip the cover with 2 fingers, you get to hold the mobile easily. The rubber finish on top is good actually, and can be cleaned easily with some solutions to give it a brand new look.
The only downside of this cover is its price.
actualy, i thought the price was really good:
it came free with my phone
as a novelty its fun and everyone thats seen it so far has been really impressed.
practically, when its on the phone it does provide a nice grippy feel and its nice to flip it open with one hand for a quick check.
it will provide protection from tiny scratches on the back but also its really annoying when its on the desktop and i want to actually do something.
when its folded back on the desk and in landscape mode it wobbles like its on springs and is impossible to type on.
i always end up just removing the case. luckily its really to remove and hopefully will survive being removed many times.
it is good that i can remove it without unplugging the usb
having used it for a week now i would not buy one.
its a good idea that needs a mark 2 still with some means of flipping closed also folding back solid as a desk stand.
my 2c.
How can you make the weather icon to show because mine is not showing up on my dot view case
scorror said:
How can you make the weather icon to show because mine is not showing up on my dot view case
Click to expand...
Click to collapse
Settings > Personalize > Dot View > Theme > None.
Sent from my HTC One_M8 using Tapatalk
I got the dot view and also very not pleased.
First of all - it's not even a good protector. The sides are completely exposed and the aluminum scratches very easily, but obviously you know that if you're gonna opt for a slim case like this.
The real problem is that the flip cover doesn't really close all that well, it remains a bit 'lifted' (may have to do with my thick Zagg Glass screen protector, but it's still an annoyance) - which in turn means that to use the dot-view features I have to push down the flip cover and operate it with another finger. That by itself pretty much defeats the purpose of the feature.
The dot-case features are actually not bad (especially when coupled with the relevant Xposed mods), but the case itself is a disaster.
I would love to see a 3rd party case that actually offers good protection, a better flip cover - and the dot interface (shouldn't be that hard to achieve).
I agree with all your points. I have a thick glass screen protector installed and it makes it impossible to close it the flip itself. I found those Xposed Mods you're talking about but they seem to no longer work (or is it just me?). I am talking about this one specifically: http://repo.xposed.info/module/com.mohammadag.dotviewmodsforhtcmate
https://play.google.com/store/apps/details?id=com.mohammadag.dotviewmodsforhtcmateunlockkey&hl=en
Whenever I attempt to use it, it tells me that I have a modified HTC Dot View APK and I need to remove it and redownload the stock one from PlayStore, which I have done several times to no avail. I'd love to have those extra features if possible?
TarekElsakka said:
I agree with all your points. I have a thick glass screen protector installed and it makes it impossible to close it the flip itself. I found those Xposed Mods you're talking about but they seem to no longer work (or is it just me?). I am talking about this one specifically: http://repo.xposed.info/module/com.mohammadag.dotviewmodsforhtcmate
https://play.google.com/store/apps/details?id=com.mohammadag.dotviewmodsforhtcmateunlockkey&hl=en
Whenever I attempt to use it, it tells me that I have a modified HTC Dot View APK and I need to remove it and redownload the stock one from PlayStore, which I have done several times to no avail. I'd love to have those extra features if possible?
Click to expand...
Click to collapse
Strange, it works fine for me.
Try this one.
That said, it's useless with the case being this.... flimsy.
I tried installing it but it says app not installed.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Related
invisibleSHIELD - Look it up for the Diamond my mate got it and it hardly shows any finger prints even after a days use and smudges whilst retaining the sheen of the device, also your back and front will be fully protected whilst keeping its form factor... if you have microscopic scratches like mine on screen that are obvious in well light conditions they will also disappear after application- ordered mine already...
Review and good pics... http://joeygadget.com/2007/08/15/on...-shield-screen-protector-for-iphone-and-treo/
They are available on ebay in most countries for Diamond - make sure you get the legit one as I am sure there are **** counterfits...
The ones for the iPhone are very hard to install and keep all of the little bubbles out, have plenty of patience when installing.
Although it is tough, the appearance after installation is extremely ugly.
Esp the screen.( no more grossy). I finally uninstalled it ( my wife said that my diamond is very ugly after the invisible shield, looks like an old PPC) and use other anti scratch screen protector and silicon case for body protection.
I have invisible shield for both 3g iphone and touch diamond...installation was easy actually but it doesnt look nice....u can tell theres something on the screen.
Would not recommend
I've already ordered one but couldn't installed it properly. It was very very hard and although I tried to be very carefully, still a lot of bubbles remained under the iShield. I put it off again and now I've got no screen protector anymore. Instead I use the original pocket case to wear the Diamond in my pocket. I think my fingers won't be able to scratch the display when touching it
Thanks for all the feedback
Interesting after install my friends one looked alright to me... hmmm I will post some pics after install and post my findings...
Anyone have a positive experience?
My friend's iPhone 3G looks MINT with it, literally can't tell it's there... But it was a ***** to install, especially around the corners.
I got one the other day and i'm sending it back, it looks apawling, far from invisible. I followed the instructions to the letter but couldn't get all of the little bubbles out, plus it just generally makes an expensive phone look like a piece of plastic junk.
Another thing is it doesn't actually cover the corners of the front of the phone so when i dropped mine the other day the corner got scratched.
Personally I wont use InvisibleSheild again as I believe their claims do not live up to the actual real world application.
shinobi_uk said:
I got one the other day and i'm sending it back, it looks apawling, far from invisible. I followed the instructions to the letter but couldn't get all of the little bubbles out, plus it just generally makes an expensive phone look like a piece of plastic junk.
Another thing is it doesn't actually cover the corners of the front of the phone so when i dropped mine the other day the corner got scratched.
Personally I wont use InvisibleSheild again as I believe their claims do not live up to the actual real world application.
Click to expand...
Click to collapse
Might make it look plastic, but I really can't say since my friend's iPhone IS plastic. Heh hopefully yours works out better, OP.
Mixed Views
Such mixed views - I have a feeling its down to having the patience to do the install properly - same my mates Diamond looks mint... hmmm
I had one of these for my Diamond and wasn't happy at all. I'm a very patient person but after a while it was just getting on my nerves. Trying to get it to bend around the case without leaving any air bubbles was just impossible. The parts that did stick down OK didn't look that nice either. It has a strange rubbery feel to it that I just don't like at all. I ended up ripping it off in frustration. Looked at their site and you can get your money back but you have to send it off to the states and I can't be bothered with the hassle or cost so I've just chalked it up as experience and will not recommend the product to anyone at all.
i bought and installed it right after getting my diamond. you can definetly see
that there's a protection layer on it and i wasn't at all satisfied for the first
week or so after application because the invisible shield felt sticky. it took me
the better part of 2 hours to get it right with no bubbles.
it's been some weeks now since installation and i'm pretty happy with the
shield. the stickyness is gone almost completely. i still can't slide my fingers or
stylus as smoothly over the touchscrees as without the shield tho.
in the end it's worth it for me because the device won't get any scratches at
all and i really hate scratches on my shiny devices
nuumuun said:
i bought and installed it right after getting my diamond. you can definetly see
that there's a protection layer on it and i wasn't at all satisfied for the first
week or so after application because the invisible shield felt sticky. it took me
the better part of 2 hours to get it right with no bubbles.
it's been some weeks now since installation and i'm pretty happy with the
shield. the stickyness is gone almost completely. i still can't slide my fingers or
stylus as smoothly over the touchscrees as without the shield tho.
in the end it's worth it for me because the device won't get any scratches at
all and i really hate scratches on my shiny devices
Click to expand...
Click to collapse
Would be great if you can post some pics front and back at a few angles in high light - not too much too ask surely lol oh and maybe put a cherry on top.
But seriously some pics would be great...
Just my reaction and my perceived negatives of the QuickWindow Case.
It might help someone who is considering buying it in the future.
But let me repeat that these are MY experience, MY problems, yours might differ
Also excuse my english, am trying my best to explain with the little knowledge of it as I have.
Intro, as I see still some questions and reviews, threads popping out for the quick window case let me summarize the negatives.
(I do have the original LG case for 30 euro, but I do believe most of this will go for a cheap case as well)
For the TL;DR ppls out there. Just scroll down there is a quick list..
Wrong hold.
It ads incredible bulk, might not look like it, but since the phone is thin,
when you get it out of the case after a month of use you will notice the huge difference right away.
The phone does feel amazing outside the case.
When you wanna play you need to put the cover to the back, and its really strange if you play games,
or even watch videos, there is a bit of force that is trying to pull the cover back,
small but you can still feel it, and as well, on your hand you will feel that there is something not smooth.
You can't actually put it properly in most of the car holders... I own an universal one.
You have to push it to the back and few times it just flipped out of the holder etc. Taking it out it will wear out faster.
The window in my case was the reason why I actually thrown the phone on the ground few times.
Finger stuck into the whole and I actually threw it few times down. (
Thank God I had the case that it was a bit protected from the impact.... see the irony in that? )
Maintenance and looks
The open space gets more dirty, more oily, more dusty then any other place on the screen, for apparent reasons.
Every time I open the cover, I spend some time cleaning it...
If you use like me a screen protector (later I will explain why this is actually needed!)
it changed even the color slightly of the always exposed part, I would have not noticed this,
but the cut out part made the protector to be more yellow, maybe due to more exposure to sunlight.
It doesn't age the same way, even though this might be the protectors fault and glass protectors out there won't probably get yellowish.
The case, being used already for 3 months now, shows wearing of the materials, the joints and the soft tissue parts are starting to clutter.
The metal rim or plastic, destroyer of the Gorilla Glass... I do not know who's "smart" Idea was this,
but if I was the one buying the case, having the actual receipt I would try to make LG give me a new phone or money
as this protection cover actually scratched the phone... I suspect something got stuck between the rim and the screen,
maybe sand, and actually scratched the screen. Who adds something so hard on a soft cover....
This was the reason for the screen protector btw....
Software and applications.
3 basic applications
Clock, always changes when I put it in my pocket, I do not like to switch always to the one I can best read
I do not appreciate the randomness
Weather stopped updating, or updates randomly, I have it frozen as I did not like the wakelocks
and the bad accuracy of it, compared to custom apps I use
Music player as I again use something custom, Google Play music its no use for me and was frozen
Are there any custom applications anyway?
The window is too small for my huge fingers in most cases and I have problems operating it.
The controls are too near the rim, should be located more to the accessible middle of the cover.
Means I not able to refresh the weather, use the music controls and when in hurry taking a call is a drag
Have to open the cover to re-check if the person just stopped talking or the call ended.
Or problems just to end the call...
No energy saved whatsoever by the use, the screen is no Amoled.
So no matter what you see through the window, it's all lights up.
All of these problems makes the LG original case just very expensive accessory with no real benefits.
The custom cases only no real benefits.
Here the promised quick list
too bulky, phone amazing without, games and car holders a no go
[*]already showing sings of wear after 3 months
[*]window gets more dirty, oily
[*]the metallic or plastic rim, can be trace back as a reason for scratches
[*]no energy saved
[*]no time saver either ....
[*]good applications not present
[*]control of the phone more complicated due to bad ergonomic of apps
[*]limited protection
What is your addition to my Negative Experience? I will edit my review when I remember other nice things about the cover...
Also I stopped using it and now testing this http://goo.gl/SFK6Nl
PS:Sorry if similar thread exists.
http://forum.xda-developers.com/showthread.php?t=2622144
Maybe this can help... It offer a simple notification, but can be improved if you have time.
I'll agree with most of this. I wish there was another official LG case.
I don't see it as too bulky - it's pretty thin in my hands. More so than the Ballistic Aspira, the Otterbox cases, the Trident cases, or the Spigen Slim Armor. The MAIN issue I find with it is, beyond needing to fold the flap back to hold the phone comfortably, is that it covers the proximity sensor. This means it kills the Answer Me functionality, or any functions using the proximity sensor while the case is closed. Aka: a lot of the touted features.
I just wish the Quick Window Apps were more useful. The three that exist... aren't.
I agree. The worst part about the case was that the one time I did accidentally drop my phone it bounced right out of the case and on its face... Basically makes the case not useful as a case for me
Sent from my LG-VS980 using Tapatalk
I find the dot view case interesting, but just not sure it's for me. I'm currently using an "Urban Armor Gear" case for my m7 and looking at cases for the T-Mobile m8 that I'm going to get. The uag is the best case I've ever used, but the tech nerd in me wants to try the newest and coolest. The dot view case almost seams samsung gimmicky to me. Opinions?
The dot view is cool but to me, that is it.
Many have complained that it does not fold back flat so you either have to push really hard or it is springy and impossible to type on. Is it cool, yes, but for me it's form over function.
Mike02z said:
The dot view is cool but to me, that is it.
Many have complained that it does not fold back flat so you either have to push really hard or it is springy and impossible to type on. Is it cool, yes, but for me it's form over function.
Click to expand...
Click to collapse
ive had it for two days now and i havent had any problems typing with the front folded over. its actually a pretty great case
Honestly it's really annoying to use and I prefer a flapless case but the dots are cool.
I'll most likely return/sell it.
I like it I've used it since the second day I had the phone and the way it looks is beast. I'm used to flap cases since my s3 so they aren't new to me I've gotten used to them but the way this one feels is so much better then those so it just depends on the person
If you want it you have to throw one handed operation completely out the window.
Not to dot...
http://t.co/myq35TGBEo
i dot with sunglasses at night .. lalalala
Thanks for the responses. I've ordered a uag case for the HTC One m8 I haven't even bought. I highly recommend these cases to anyone
Well, I tried really hard to like the Dot View case the past couple of days and it's going to Verizon. The novelty wore off. It didn't hold the phone as well I want it to. One drop and I can see the phone flying out of the case sliding down the floor *shudder*. The lint was driving me nuts and so was the flap. I'm going back to the Otterbox Commuter until Spigen ships the Slim Armor.
retrac650 said:
Thanks for the responses. I've ordered a uag case for the HTC One m8 I haven't even bought. I highly recommend these cases to anyone
Click to expand...
Click to collapse
I agree. Used UAG on my SGN, SIII, M7 and finally broke down and spent the 35 bucks for the black UAG after trying about 6 other cases.
I just don't like flip cases for my phone. I also think the dots will get full of dust dirt over time. As was said, there was no way to type with one hand with the Dot View. The back was too "springy" when folded back. Maybe that will break in over time but was just not for me. It is pretty cool looking though.
Went ahead and returned it.
Impossible to use one handed and even was hard to use with two hands because of how springy the flap was.
It didn't seem like it would protect it well either. The back was cheap plastic and the sides were exposed.
The dot feature is fun but burns some battery and most features didn't even work (swipe down to voice call and some icons).
Not worth the $35 I spent on it and definitely not the $50 it retails for.
vorter said:
Went ahead and returned it.
Impossible to use one handed and even was hard to use with two hands because of how springy the flap was.
It didn't seem like it would protect it well either. The back was cheap plastic and the sides were exposed.
The dot feature is fun but burns some battery and most features didn't even work (swipe down to voice call and some icons).
Not worth the $35 I spent on it and definitely not the $50 it retails for.
Click to expand...
Click to collapse
I agree with everything you said. BTW, swipe down to voice call is a setting in Motion Gestures that has to be checked. I thought it wasn't working either until I found that setting.
Tikerz said:
I agree with everything you said. BTW, swipe down to voice call is a setting in Motion Gestures that has to be checked. I thought it wasn't working either until I found that setting.
Click to expand...
Click to collapse
I have mine checked and it still doesn't work. As soon as I swipe down the voice command come on then immediately goes to weather.
faded03cobra said:
I have mine checked and it still doesn't work. As soon as I swipe down the voice command come on then immediately goes to weather.
Click to expand...
Click to collapse
I consider the case unusable. At least it is unusable in a practical sense...I gave mine 24 hours and decided it was a no go. The M8 is flat out stunning...dot case, not so much.
I would like it but not getting it because it would not offer enough protection IMO looks cheap too.
I got mine yesterday. I am going to give it a few days and try it out but my first impression is, not super positive. This should be a $10-$20 accessory at best. I paid $45 on pre-order. But I am going to give it an honest try as I have never used a flipcase before which could be part of my problem.
It feels really nice, the soft touch is smooth and it looks sexy but unless there are a lot of software upgrades coming for it I don't really see the value add, and it certainly does not justify the price.
The one complaint I've seen in this thread that I kind of dipute is the landscape camera use difficulty. There is so much bezel on the top and bottom of this phone I had no issues recording stills and video last night in landscape mode.
Pros:
-Looks pretty classy
-Feels nice to the touch
-Autoscreen off on close is nice since HTC did not include a gesture off
-Swipe down to voice call gesture with case closed seems kind of usful.
-Gimmicky, you can show it to your co-workers and they are generally impressed.
Cons:
-Very little drop protection
-expensive
-no more one handed operation. I have pretty big hands and I tried for 20 mins last night to come up with a way but it is clunky and awkward at best. It is doable with my left hand fairly easily but I am right handed..
-Does not fold back flat which makes one handed use feel weird even after you get the cover opened or when setting phone down on flat surface.
-Only supports a couple HTC apps, if you have the Google edition M8 it pretty much just shows you the time and weather/temp icon. I actually had to flash back to my stock based rom last night as I've been running SinLess and this cover baiscally did nothing on the GPE rom.
-The touch sensitivity seems a little clunky. The double tap to wake without the case works just OK for me usually. But the double tap gesture with this case on seems to be more of a quadruple or more tap as the first time I double taps doesn't usually wake up the display. Coming from the LGG2 this is kind of a bummer as that phone's knock on feature was almost flawless.
All that being said, I am going to use it for at least a week and see if I can get used to it. And I am going to keep it and see if HTC updates the Dot View app in the coming months.
kennonk said:
I got mine yesterday. I am going to give it a few days and try it out but my first impression is, not super positive. This should be a $10-$20 accessory at best. I paid $45 on pre-order. But I am going to give it an honest try as I have never used a flipcase before which could be part of my problem.
It feels really nice, the soft touch is smooth and it looks sexy but unless there are a lot of software upgrades coming for it I don't really see the value add, and it certainly does not justify the price.
The one complaint I've seen in this thread that I kind of dipute is the landscape camera use difficulty. There is so much bezel on the top and bottom of this phone I had no issues recording stills and video last night in landscape mode.
Pros:
-Looks pretty classy
-Feels nice to the touch
-Autoscreen off on close is nice since HTC did not include a gesture off
-Swipe down to voice call gesture with case closed seems kind of usful.
-Gimmicky, you can show it to your co-workers and they are generally impressed.
Cons:
-Very little drop protection
-expensive
-no more one handed operation. I have pretty big hands and I tried for 20 mins last night to come up with a way but it is clunky and awkward at best. It is doable with my left hand fairly easily but I am right handed..
-Does not fold back flat which makes one handed use feel weird even after you get the cover opened or when setting phone down on flat surface.
-Only supports a couple HTC apps, if you have the Google edition M8 it pretty much just shows you the time and weather/temp icon. I actually had to flash back to my stock based rom last night as I've been running SinLess and this cover baiscally did nothing on the GPE rom.
-The touch sensitivity seems a little clunky. The double tap to wake without the case works just OK for me usually. But the double tap gesture with this case on seems to be more of a quadruple or more tap as the first time I double taps doesn't usually wake up the display. Coming from the LGG2 this is kind of a bummer as that phone's knock on feature was almost flawless.
All that being said, I am going to use it for at least a week and see if I can get used to it. And I am going to keep it and see if HTC updates the Dot View app in the coming months.
Click to expand...
Click to collapse
Completely agree with your assessment. The price was a big downside to the case. if it was $20, I could live with the shortcomings and just use it on occasion.
Agreed ^^^ I paid $25 with my work discount but had to remove my bodyguardz ultra-thin tempered glass screen protector as the flap wouldn't close flat.
Sent from my unknown using Tapatalk
So the flap on the case doesn't stay open whilst using it one handed?
I don't want to be folding the flap around the back of the phone every time I use it..?
What do you think? I know that we are basically trading functionality for retro coolness with some usefulness. Taking a picture in landscape stinks but I was willing to live with it as it is the first case I ever used that actually is useful.
The one ish I am having that I wanted to check with others on is when I open the case it always turns on the device. However, I cant say the same is consistent on closing it. It seems like the magnet might not be strong enough or the lid heavy enough but it requires me at times to press on where the magnet is to shut off the device. I think this might be due to the lid getting a little misshaped when its flipped behind when reading. I would prefer not having to think about it and when the case is closed the device always will turn off.
Not losing any functionality as far as I know, when I close the cover on my current case its just off.
Dot case arrives tuesday
Electronic Punk said:
Not losing any functionality as far as I know, when I close the cover on my current case its just off.
Dot case arrives Tuesday
Click to expand...
Click to collapse
So you have one or it arrives Tuesday?
Loss of functionality statement refers to the same thing that happens to all phones with this flip style case. It makes it more difficult to take landscape pictures and one handed use. Like said ok with giving that up just want the case to work. Just trying to find out if I had a dud. Guess I will find out once more people get them.
Supacat said:
So you have one or it arrives Tuesday?
Loss of functionality statement refers to the same thing that happens to all phones with this flip style case. It makes it more difficult to take landscape pictures and one handed use. Like said ok with giving that up just want the case to work. Just trying to find out if I had a dud. Guess I will find out once more people get them.
Click to expand...
Click to collapse
Well I have the standard flip case that has a magnet that turns the device on and off, pretty sure thats still in the flipcase.
My dot case arrives tuesday and I am far too excited about that.
Electronic Punk said:
My dot case arrives tuesday and I am far too excited about that.
Click to expand...
Click to collapse
As I was when BestBuy said it was there for me to pick up. They said that that was the only one they got. Don't understand why they made so few. It does look beautiful!
I like the dot case, but not for everyday use. I just put a zagg glass on my phone and now the dot case will not close all the way.
I am using the dot view case and I dont have the issue you mentioned. My phones display goes off when the cover touches the screen.
The manual of the dot view case states that ticker screen protectors might affect the dot view cases finger gesture abilities.
PS I do not have a screen protector on mine yet
agarp said:
I am using the dot view case and I dont have the issue you mentioned. My phones display goes off when the cover touches the screen.
The manual of the dot view case states that ticker screen protectors might affect the dot view cases finger gesture abilities.
PS I do not have a screen protector on mine yet
Click to expand...
Click to collapse
I have a nilkin tempered glass protector on mine and gestures with the dot case haven't been affected.
I love mine! I wish that you could control music with the cover on it. That's my only gripe. I like to use my phone as a music player at work to make my day go by a little quicker. I wonder if that's possible with an update....
Bah, case just got delayed a week, seems they completely underestimated the demand.
I had it for a day, then returned it. It does not protect the right side at all and in my opinion it is just a gimmick. Wait a little while until lint starts plugging the holes and then it will be just an ordinary flip case.
59fifty1 said:
I love mine! I wish that you could control music with the cover on it. That's my only gripe. I like to use my phone as a music player at work to make my day go by a little quicker. I wonder if that's possible with an update....
Click to expand...
Click to collapse
Well, knowing Verizon an update will arrive aprox 720 days from now. I'd really enjoy an update that makes the day go by a little quicker, since we have s-off now can we use one from another carrier? haha I have the case. Love it. First case that has actually provided screen protection. I usually throw zaggs on all my phones but i find they affect the smoothness of swiping. Just going to use the dotview and forgo the zagg.
Keep me posted on that update though!
\
Electronic Punk said:
Bah, case just got delayed a week, seems they completely underestimated the demand.
Click to expand...
Click to collapse
I got my case today and gotta say it aint that bad
v1rk said:
I got my case today and gotta say it aint that bad
Click to expand...
Click to collapse
Where from?
Electronic Punk said:
Where from?
Click to expand...
Click to collapse
expansys
Damn, they have been showing a date of 1st May so I ignored them, ah well, I have waited 2 weeks I can wait another
Electronic Punk said:
Damn, they have been showing a date of 1st May so I ignored them, ah well, I have waited 2 weeks I can wait another
Click to expand...
Click to collapse
Yeh that annoyed me, so never bother checking it until it came at the door today
Sent from my HTC One_M8 using XDA Premium 4 mobile app
One thing that's annoyed me about this case is you have to use the default HTC SMS app for the SMS notification icon to display. But that app sucks as it doesn't automatically turn your phone on when you have an SMS which I prefer. Sucks it doesn't have a popup but that's a separate issue. Anyway my solution to this is to use Tasker and the Secure Settings plugin. For incoming SMS call a task that uses Secure Settings screen on option. This didn't work right for me with my EVO LTE when I tried (screen wouldn't turn off) but this worked right away. And since the case is closed the screen on command shows the dot view sms notification.
Hopefully either HTC or some other developer expands the use of the case with a hack to the app or maybe a custom application.
agarp said:
I am using the dot view case and I don't have the issue you mentioned. My phones display goes off when the cover touches the screen.
The manual of the dot view case states that ticker screen protectors might affect the dot view cases finger gesture abilities.
PS I do not have a screen protector on mine yet
Click to expand...
Click to collapse
Thanks for the update so hopefully its a dud case and not the sensor in the phone that's messed up
Had mine for two weeks now...I like it...obviously it could be better but the utility I get out of it and the fact that it does look pretty cool is good enough for me. I never have used a case or screen protector before on my thunderbolt or DNA so I have no basis of comparison and there's obviously cases out there that protect the phone better...but I live by the adage..don't drop your phone!
As for increased functionality with the dot view case...if it's possible it could happen quickly as htc is updating these apps in the play store..HTC dot view, tv, etc so they don't have to go through Verizon testing as part of an OTA.
As for the lint build up..I imagine a quick spray from a can of compressed air will take care of that!
I really want the Dot View case for this phone. Did anyone mange to get their hands on one and dicovered that they don't like it? Why don't youlike it and would you sell it?
I just got it today and I absolutely love it! The only thing I don't like is, when you flip it back then its a little slippery! But thats all! It fits great and just looks great on the phone!
Sent from my iPhone using Tapatalk
I have mixed feelings about it. When I bought my HTC One from Verizon, I was told that they weren't going to have the Dot View cases in stock for at least a month or two due to the high demand of them. Because of this, I picked up the Incipio Black Feather Case. Funny enough, the next day after buying I get a phone call from Verizon saying they got a single dot view case in being held for me. The case itself feels incredibly cheap. While it definitely feels like it can protect my screen, the backing of the case feels just like a cheap plastic. For the cost of the case, I was expecting something a little bit better in the build quality.
As for the case itself, its too gimmicky for me for the time being. It only works with default HTC apps. I use a different SMS app (Sliding Messenger Pro) and the Gmail app for my email. Neither of these are supported by the dot view case. I've tried googling around to see if there's a work around for these or a separate dot view app that allows these but have yet to find anything. The only thing I could use the case for was the time, answering phone calls, voice dialing, and changing my volume. I really wanted to be able to see my sms / email notifications on screen.
Im also not a fan of the folding case in general yet. I'm not used to the folding and I often text with one hand so it makes it rather awkward to try and hold the case open in order to text.
I don't know though.. if I could use my own SMS / Gmail apps with it instead of the default HTC ones, I might want to use it again. Until then, its going to sit on my desk unused.
Dot View case Pros and Cons
Randomjoel said:
I really want the Dot View case for this phone. Did anyone mange to get their hands on one and dicovered that they don't like it? Why don't youlike it and would you sell it?
Click to expand...
Click to collapse
I have been using the HTC Dot View case for about 2 weeks now. Here are some simple pros and cons
Pros:
Look...Seamless and perfect compliment to the M8
Feel...plastic and rubber that seems like a good build
Protection...Fully covers screen with rubber "dot" flap and plastic back wraps the back and corners of the metal body of the phone
Alerts...Easy to read 8 bit type text and icons (looks great in the dark)
Cons:
Price...I got mine for $50 at an AT&T retail store
Dust/lint...gets trapped in the "dots" find myself using a can of BlowOff keeping it clean
Alert Limitations...can only use the HTC apps with this case
I would recommend if you have $50 to blow. I personally don't like 3rd party accessories so willing to pay for the HTC branded products. I love my DotView case but trying to provide a unbiased opinion.
I just got mine in the mail a week ago. So far, I love it. I just hope that HTC releases updates to allow third party notifications like Gmail, Facebook, etc. I would also really like if they could integrate a music player controls as well. But all in all, it's a great accessory to such an amazing device.
Anyone with a warm black dot view? Is it black or grey? Also if you can post the part number (you can find it on box backcover)
Anyone notice a couple of holes are kind of shiny inside? Like something is on the plastic film that's in the holes. Anyone cleaned theirs yet? Would water and soap be ok?
FlowingAway said:
Anyone notice a couple of holes are kind of shiny inside? Like something is on the plastic film that's in the holes. Anyone cleaned theirs yet? Would water and soap be ok?
Click to expand...
Click to collapse
don't poke or remove the peices in the holes it keeps the stuff off it screen and I just wiped it down with some water it cleans up quite nicely I wouldn't use soap some soaps kill pixels so yah... No glass cleaner either my friend sprayed his with some trying to make it shinier it killed the Nfc tag in it
I think the idea behind the case is solid but its execution is flawed. Mine seems to loose its grip on the top corners as the plastic is too hard and needs a more grippy material. I've swapped 3 cases now. Its been mentioned before about the short hinge not letting the front sit flat on the back. I do love and find the display very useful. Hopefully a third party will be able to remedy the faults.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
sageandonion said:
I think the idea behind the case is solid but its execution is flawed. Mine seems to loose its grip on the top corners as the plastic is too hard and needs a more grippy material. I've swapped 3 cases now. Its been mentioned before about the short hinge not letting the front sit flat on the back. I do love and find the display very useful. Hopefully a third party will be able to remedy the faults.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just looked at my DotView and to be honest I can't notice any of those flaws. Had mine on awhile now and it'd still holding solid.
Sent from my HTC One_M8 using Tapatalk
Cyanogenmod Compatability
If I flash CM11 Nightly on my Verizon M8 will the dot view case still be compatible?
Randomjoel said:
I really want the Dot View case for this phone. Did anyone mange to get their hands on one and dicovered that they don't like it? Why don't youlike it and would you sell it?
Click to expand...
Click to collapse
I got one but I'm not a fan of holding it in one hand while it's open. I'll probably sell or trade it.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Overall disappointed. Sure it's a nice case and, feels good in the hand but the hinge on it makes it almost unusable for daily use. If you only open your phone a few times a day it's probably perfect but if you actually need to use the device totally annoying. Will return it.
FlowingAway said:
Anyone notice a couple of holes are kind of shiny inside? Like something is on the plastic film that's in the holes. Anyone cleaned theirs yet? Would water and soap be ok?
Click to expand...
Click to collapse
I noticed the same shiny spots on mine. I'm not to worried about it but curious none the less... I clean mine with only water. and compressed air.
Randomjoel said:
I noticed the same shinny spots on mine. I'm not to worried about it but curious none the less... I clean mine with only water. and compressed air.
Click to expand...
Click to collapse
Yeah! I've tried compressed air and water but the 2 shiny holes remain. They always catch my eye when I glance down and I think I have a notification or something.
Anyone have the "Orange" dot view case? If so, is it really orange, because the images online look more like it's red?
Sent from my 831C using XDA Premium 4 mobile app
zrcaswell said:
If I flash CM11 Nightly on my Verizon M8 will the dot view case still be compatible?
Click to expand...
Click to collapse
ATM no but it looks like they are working on it. You will also lose Motion Launch and use of the secondary depth camera with CM
http://www.androidbeat.com/2014/05/htc-one-m8-gets-official-cm11-nightlies/
Be careful not to drop the phone in this case. Dropped it less than a foot onto the top left edge, left a dent in the black plastic bar on top of the phone.
Next gen Dot View should have a flush foldover. Biggest detractor for me. Love it otherwise...only a matter of time before features are ported to aosp and more functions are added (gapps etc)
Sent from my HTC One_M8 using Tapatalk
May or May not help, I noticed the phone has an Dot View app installed. That may all that is needed to get it working on another ROM. Seems to use a NPC chip. That is what I'm guess is detecting when the case is opened or closed. The HTC on the front lines up with the Small box on the inside.
I willing to sell mine too as holding it with one hand it not an option with this case.