Hey all,
Please forgive me if i've missed this somehow, but i searched and searched and no luck. Here's the dealio. What happened is that on my first ever flash attempt to flash our amazing phone, i somehow grabbed the captivate stock rom and flashed via odin.
Yeah. Imagine how that soft brick felt to a noob after mustering the courage...
Well in any case, after a little research and experimentation i moved on, and flashed again and again, but that AT&T WORLD PHONE splash screen (basically the first thing you see after reboot or power on) right before the correct T-MOBILE VIBRANT splash screen just won't go away!
I've flashed several times, after reverting to stock, or over the current rom, and the damn screen just won't go away
I can't say what files are left behind by residual after that first idiotic Captivate flash to cause this, or how they affect my phone. After multiple roms i think we all know there there are no 2 Vibrants alike! So i experience some reported issues and of course all sorts of others with any available here...
If anyone can give me a hand with this issue or point me in the right direction i would really appreciate it. This community is the best!
Thanks in advance,
K~
AFAIK youi have to update bootloader code
try to RE-install 3Button fix for Vibrant - it might replace the logo with Vibrants...
P.S: I am not a pro, if you brick it... then
Ok here goes... This is my first thread post here but I am in serious need of help.
I have searched and searched the forums for a hopeful answer but I have found it difficult to find the answer I seek.
So here is the story:
Bought a GT second hand from Akihabara in Japan which was locked to NTT DoCoMo. I was using it as a WIFI only Tab and all was wonderful till my IT brain decided it could be better and I began to tinker.
I had been looking around for a way to make my Australian Virgin Mobile SIM to work on the tab and found a lot of good answers but nothing that would make it work.
I then had the brilliant idea to change the firmware with a European firmware so I could get all the features enabled from a fresh start. Which is where it all went wrong.
I first tried to flash the tab using Odin 1.7 with the P1000XXJK5 euro firmware from samfirmware.com
This failed and left my tab with the picture of a phone and a pc with a dotted line and in between them an exclamation point in a triangle.
After a lot of fiddling (I dont remember what I did but I managed to get rid of that screen had something to do with retrying the flash and it was very late last night at this point) I managed to try again but Odin just kept failing on running the updated firmware.
I then decided that it would be a good idea to run the Rotohammer firmware by following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=895827&highlight=sc-01c
This is where I once again received errors from Odin and now my tab is somewhat bricked.
I tried reflashing but same errors every time. (I currently dont have the errors from Odin but I will update my post when I get home)
I can still get to the downloading screen (Yellow triangle with the Android digging) so I am hopeful all is not lost.
So now you have heard my sob story I will ask two questions....
1. Has anyone actually successfully flashed a Japanese model Tab?
2. My only thought/hope at the moment can anyone direct me to an original NTT DoCoMo firmware so I can at least go back to having WIFI only Tab?
Thanks in advance if you can help
Alex
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
I am searching the an original NTT DoCoMo firmware.
Electroboy said:
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
Click to expand...
Click to collapse
Oz the model is SC-01C it has a build date of 2010/12
I was thinking considering I can get into the build/download screen maybe trying an emergency firmware recovery using Kies.
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
I'm going to give the original firmware a go today at lunch time and I will let you know how I go. Thanks anyways for the link if all goes well I'll look at possibly trying the the koxudaxi kernel.
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
UPDATE: Still getting the same problems using heimdall to flash the tab. Any suggestions as to what I could do next?
Recovering a Docomo Tab
I'm currently running Overcome v1.1.3 ROM and richardtrip's V15 kernel on my SC-01C.
acont said:
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
Click to expand...
Click to collapse
You're getting this error from Heimdall, right? Have you tried Odin 1.7?
Here's how I recovered my Tab using Odin:
1. Following the instructions in http://forum.xda-developers.com/showthread.php?t=895827, specify the P1_add_hidden.pit in the PIT button and select Re-Partition.
2. Specify the stock Docomo ROM when pressing the PDA button.
3. Ignore the Phone and CSC buttons, as the stock ROM already contain these items.
You should be able to restore your Tab to stock settings using this procedure.
If this doesn't work, you might want to check if the USB connection to your PC is ok, and if everything necessary to run Odin is installed on your PC.
Bugger!
Well thanks for your help all of you but I think I have just made matters worse.
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
I can't boot into download mode and I can hold down the power button till I turn blue in the face... So as Bones would say "It's dead Jim"
Unless any of you have anything else I could try as a last ditch shot I might just have to ship it back to Japan and get them to fix it or maybe try Samsung here in Oz.
Serves me right
Thanks again.
acont said:
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Click to expand...
Click to collapse
What exactly happened?
The SC01COMJK2 firmware does not contain protected bootloaders, by the way.
acont said:
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
Click to expand...
Click to collapse
I've heard about this happening when the battery runs out. Try connecting the Tab to your PC (not your AC adapter) and let it trickle-charge for an hour or so. If successful, you should see the download screen.
fury1sog unfortunately that didnt work
spoke to the samsung repairers here in Aus and they said they can take a look at it for me hopefully bring life back into my unit and then I will never touch it again
Any thoughts?
Hopefully this post is still being looked at but has anyone got any ideas as to what I could do before I fork out $374 to my tab repaired by Samsung Australia?
According to the repair guys its a faulty board (not an idiot that tried to flash it) and needs to be replaced. Not sure if this is worth my trouble considering I could buy a brand new tab for $599.
There is a positive out of this, the MB will be an Australian MB and I will have a working "Australian" tab instead of the Japanese version.
Considering the unfortunate tragedy in Japan I am not sure I should try and get my friend in Japan to fix it for me.
Thoughts anyone?
I know someone who can unlock it, I have mine unlocked by them.
I was afraid of flashing it myself so I paid to have it unlocked, cost was $20.
I think you better go for the MB replacement, it's cheaper.
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
zetsurin said:
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
Click to expand...
Click to collapse
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
also used heimdall. starts downloading. but stuck almost at the end of the tab's progress bar.
argh...
me too ! samsung galaxy tab m180 Korean .... huhu
What ROM is best for a SC-01C?
Hi Guys
I picked up a 2nd hand SC-01C from Yahoo Auction, and am wondering what the best ROM to use with it is...
Looks like this guy has got an Overcome ROM on it OK, (http://chaki-ramone.blogspot.com/2011/06/galaxytabsc-01cgingerbreadromovercome.html), so I wonder if the latest version (http://forum.xda-developers.com/showthread.php?t=1205990) will work OK - anyone tried? (is the SC-01C a GSM-based model??)
I'm not going to use a SIM with it, so I'm not bothered about unlocking - but just want it rooted & want a good balance between speed & battery life. If you were going from scratch with an SC-01C, what would you do? Any suggestions greatfully received!
Thanks in advance?
PS - I'm an iPhone / iPad / Ideos 8150 / Notion Ink Adam owner, all jailbroken / rooted. So I'm not scared about rooting per-se, just worried about trying something that will not work because of anything docomo has done to the Tab!
Acont you could be coma bricked try pluginging it into THE MAINS for at least 4 hours if nothing come up your hard bricked.
Sent from my GT-P1000 using XDA Premium App
zetsurin said:
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
Click to expand...
Click to collapse
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
huylang280285 said:
me too ! samsung galaxy tab m180 Korean .... huhu
Click to expand...
Click to collapse
unbricking M180 is done long time ago
Here is a video for you
http://www.ort-jtag.com/blog/?e=15
udhtari said:
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
Click to expand...
Click to collapse
What about this P1000R , what is special or different ?
I know P1000L was for south american edition !
lemmy_0 said:
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
Click to expand...
Click to collapse
Docomo solution is very soon !
That TAB need JTAGging thats the only way ..
I have the good and dead device in hand , we will release for ORT-JTAG probably this week ..
Best Regards
Oz.
Ok! I bought a Samsung P1000N Galaxy Tab from ClaroPR this week. Like always with every android devices i have i rooted it with superoneclick. Yesterday i was trying to update the tablet to gingerbread since it had Froyo. Follow the tutorials in here to flash it(I guess i didnt read the warnings about the secure bootloaders or something like that) but the thing is that i ended up softbricking my device. The gingerbread i was trying to flash was the JQ1. Anyways, i tried to flash it using Odin 1.7, it ended up failing and now i just have the cell triangle and computer logo of dead on the screen. Thing is that i know its not supposed to be totally bricked. But then in the device manager it doesnt show as samsung composite device or anything like that. I need help from someone who has gone thru this already and knows what to do. Or is it just a brick and thats it? Thanks...
enelyam said:
Ok! I bought a Samsung P1000N Galaxy Tab from ClaroPR this week. Like always with every android devices i have i rooted it with superoneclick. Yesterday i was trying to update the tablet to gingerbread since it had Froyo. Follow the tutorials in here to flash it(I guess i didnt read the warnings about the secure bootloaders or something like that) but the thing is that i ended up softbricking my device. The gingerbread i was trying to flash was the JQ1. Anyways, i tried to flash it using Odin 1.7, it ended up failing and now i just have the cell triangle and computer logo of dead on the screen. Thing is that i know its not supposed to be totally bricked. But then in the device manager it doesnt show as samsung composite device or anything like that. I need help from someone who has gone thru this already and knows what to do. Or is it just a brick and thats it? Thanks...
Click to expand...
Click to collapse
If you get anything on the screen at all (Triangle, Download mode, Samsung logo, etc...) It's not bricked, just sponged. Unfortunately I don't have any experience with the P1000N, but in general, try reloading the samsung drivers and try another USB port. Once you get it to show up in device mangler you can push the right tar with Odin and you'll be cooking with gas again. Sorry I can't help with this specific model, but sammy devices in general are hard to truly "brick"
Okay i think now its dead. It turned off when it lost the charge and now not even Heimdall recognize it. So if someone knows about a good tutorial on Jtaging this i will appreciate.
Edit: Found useful guide in here to resurrect it so i will give that a try...
The Unbrickable Mod works like a champ! I know, because I had to resort to this over this last weekend.
However, it does require mods to the mainboard that require some skill. Once accomplished, it is virtually impossible to brick your Tab.
http://forum.xda-developers.com/showthread.php?t=1338073
enelyam said:
Okay i think now its dead. It turned off when it lost the charge and now not even Heimdall recognize it. So if someone knows about a good tutorial on Jtaging this i will appreciate.
Edit: Found useful guide in here to resurrect it so i will give that a try...
Click to expand...
Click to collapse
Why you want to go for Jtag just becoz battery is dead. Get the Tab Opened, Recharge the battery externally (Repair/Service Center should help). Follow the Team Overcome Guide to install the Stock Safe Rom and then you can either continue with it or move to any other ROM of your choice.
I would keep JTAG as the Last option.
If it's new Tab, it should still be under warranty.
wow, impressive post (the unbrickable mod).. Not sure I'd have the guts to do that though..
So here's my problem. I think I've bricked my device. Don't know if it's softbrick or hardbrick, but either way my phone just does not boot up. The only instance it works is when I remove the battery and try to charge the phone, it shows a picture that it didn't find a battery. All of this occurred while trying to unlock the bootloader. Something similar already happened to me like a month or two ago, but I was able to flash stock KDZ using the online LG Support Tool. Anyway, the part where it all messed up is probably the aboot.bin file, although I'm quite certain I flashed the right file for my device. Also, installed CWM recovery, and after restarting the device it just won't boot at all, not even the software upgrade mode or anything. So my guess is that something is wrong because of either a wrong aboot.bin file for my D405N or the custom recovery. I tried flashing stock KDZ, but I couldn't get my phone into software upgrade mode. Also, tried doing a hard reset, but an LG logo didn't even come up. The battery is at least half full. So is there anything I can actually do in this case? Any help is appreciated.
P.S. Yeah, I did post in another thread (though I didn't create it), but I'm quite desperate with this. Either I fix it myself somehow, or I'll have to take it to the warranty.
EDIT: Took it to a repair. Should be done in around a week. Got an old Samsung Galaxy Mini as a replacement.
linasj said:
So here's my problem. I think I've bricked my device. Don't know if it's softbrick or hardbrick, but either way my phone just does not boot up. The only instance it works is when I remove the battery and try to charge the phone, it shows a picture that it didn't find a battery. All of this occurred while trying to unlock the bootloader. Something similar already happened to me like a month or two ago, but I was able to flash stock KDZ using the online LG Support Tool. Anyway, the part where it all messed up is probably the aboot.bin file, although I'm quite certain I flashed the right file for my device. Also, installed CWM recovery, and after restarting the device it just won't boot at all, not even the software upgrade mode or anything. So my guess is that something is wrong because of either a wrong aboot.bin file for my D405N or the custom recovery. I tried flashing stock KDZ, but I couldn't get my phone into software upgrade mode. Also, tried doing a hard reset, but an LG logo didn't even come up. The battery is at least half full. So is there anything I can actually do in this case? Any help is appreciated.
P.S. Yeah, I did post in another thread (though I didn't create it), but I'm quite desperate with this. Either I fix it myself somehow, or I'll have to take it to the warranty.
EDIT: Took it to a repair. Should be done in around a week. Got an old Samsung Galaxy Mini as a replacement.
Click to expand...
Click to collapse
Remember Next time Unlock Bootloader before Installing CWM.