Hi there* I have a T-Mobile PDA with a broken cover and wonder if anybody knows an adress in US or UK where I can buy a new one.*
It would be really great if you could help me out with this* THANKS* :lol:
if its still under warranty, contact t-mobile,
if they wont replace it for free, im sure its less than $70
(because thats how much they said they'll bill me, if my replacement turned out to have a cracked case )
i also heard you can use the "DUMMY PHONE" case, ebay $5-20
but that is made from cheap plastic.
Spare cover
Hi,
I have a spare 02 cover for you.
Would that help?
Looks perfect, I can send it to you if you make
me an offer I can't refuse.... :wink:
Best regards,
Murk
Netherlands
Hello Guys!
My MteoR/Breeze was falling from my table and now the case is broken. Have anyone an idea where I can purchase a new case?
Thanks for Help
with best reguards
cheapest one that I could find.
http://mobile.brando.com.hk/prod_detail.php?prod_id=03387
thank you for help. An other question, can I buy the Jogdial seperatly?
thank you again for help
well Google might help with that, all I know is that it is soldered onto the Motherboard and even if you can buy a new one, you will have to use a surface board soldering iron to install it.
Ok, thanks. I used google, but only for the jog-wheel, not for a motherboard.
Thank you again. can be close!
Shimpuu
i recieved a tilt i had purchased on ebay and it is pretty bad. i know it needs a flex cable after SEARCHING for it...however i cannot find the answer to this. i am looking into purchasing a full housing off ebay from forceviewer_uk however its unclear if i need the sliding mechanism to go with it as i just want to replace everything except the board and lcd. do i need the sliding mechanism, is it a good idea to replace it, or what. any help is very appreciated. thanks
Hi there,
the cover for the USB port of my HTC Dream /T-Mobile G1 became loose. The little plastic cable that holds it to the phone ripped but I still had it - I planned to glue the cover back to that plastic cable thing.
Unfortunately I lost that cover now. I was searching the web (including ebay) for replacement but even if I bought a complete housing they'd come without that little plastic cable holding the USB cover.
Does anybody know where to get replacement? By the way I would like to know where to get good (high quality) tools for opening the housing without breaking it.
I appreciate your help.
You would probably have to buy a broken phone and hope that the cover is still intact. While I managed to maintain that cover on mine, I did find it highly frustrating. Many people actually PREFERRED to rip it off. I certainly wouldn't go out of my way to replace it, since that cover really is quite redundant. You won't hurt anything by not having it.
Yes, you're right somehow, it is redundant. It looks a little ugly, though. Maybe someone can still point a way to that cover
2 bricked G1's for sale on ebay for parts:
http://cgi.ebay.com/2-BRICKED-G1-PH...652?pt=LH_DefaultDomain_0&hash=item20b72aa884
Thank's for the ebay link. I am already bidding on some broken phones on ebay.de. though. I though was hoping to find that cover as a sparepart somewhere.
jdb78 said:
Thank's for the ebay link. I am already bidding on some broken phones on ebay.de. though. I though was hoping to find that cover as a sparepart somewhere.
Click to expand...
Click to collapse
Try topicovers.com if you are still having problems. I bought some and now is a big fan of them. Good luck!
Hi all,
My HD2 running HyperDroid v12 from Pongster is a dream phone. Everything is working excellent except recently I got the digitizer changed from a local shop here in LA and in the process of fixing the digitizer the idiot seems to have ruined my GPS related hardware (which obviously he is not owning up to). I tried all sorts of software remedies (including changing ROMS) but nothing seems to get a GPS lock.
My questions is -
Is there any way to buy and replace the GPS receiver in the phone?
Thanks
The guy might have accidentally removed the connection from the circuit board, I remember seeing threads from before of other's doing the same thing when fixing the digitizer.
Moon2 said:
The guy might have accidentally removed the connection from the circuit board, I remember seeing threads from before of other's doing the same thing when fixing the digitizer.
Click to expand...
Click to collapse
Thanks Moon
Any recommendations on what tools to buy to open my HD2? Any schematics on what the gps antenna would look like? Coudnt find similar threads for HD2...
Here's links to official disassembly & assembly videos:
Disassembly: http://www.youtube.com/watch?v=cL-jnUKufC4&feature=player_embedded
Assembly: http://www.youtube.com/watch?v=t8Q7mXdcJ54&feature=player_embedded
__________________________________________________________________
They tell you what you need, and instead of the "flat plastic stick", a guitar pick should be fine.
- No need to remove speaker from housing.
- Ignore everything from 1:47, and look at 3:22 from the disassembly video, instead of removing the gps coaxial cable, check if it's actually connected properly, if not, just push it in.
_______________________________________________________________
I'll try and find those threads I remember reading, in which the OP and other members had the same problem after replacement of digitizer.
Moon2 said:
Here's links to official disassembly & assembly videos:
Disassembly: http://www.youtube.com/watch?v=cL-jnUKufC4&feature=player_embedded
Assembly: http://www.youtube.com/watch?v=t8Q7mXdcJ54&feature=player_embedded
__________________________________________________________________
They tell you what you need, and instead of the "flat plastic stick", a guitar pick should be fine.
- No need to remove speaker from housing.
- Ignore everything from 1:47, and look at 3:22 from the disassembly video, instead of removing the gps coaxial cable, check if it's actually connected properly, if not, just push it in.
_______________________________________________________________
I'll try and find those threads I remember reading, in which the OP and other members had the same problem after replacement of digitizer.
Click to expand...
Click to collapse
Thanks so much bro... Greatly appreciate your help!
Moon2 said:
Here's links to official disassembly & assembly videos:
Disassembly: http://www.youtube.com/watch?v=cL-jnUKufC4&feature=player_embedded
Assembly: http://www.youtube.com/watch?v=t8Q7mXdcJ54&feature=player_embedded
__________________________________________________________________
They tell you what you need, and instead of the "flat plastic stick", a guitar pick should be fine.
- No need to remove speaker from housing.
- Ignore everything from 1:47, and look at 3:22 from the disassembly video, instead of removing the gps coaxial cable, check if it's actually connected properly, if not, just push it in.
_______________________________________________________________
I'll try and find those threads I remember reading, in which the OP and other members had the same problem after replacement of digitizer.
Click to expand...
Click to collapse
Hi Moon,
I followed the steps in the videos you provided and opened my HD2. The GPS coaxial cable seems to be fit in snug, which I guess is indicative that the GPS antenna itself may have gone bad somehow. Possible?
I did a little searching and found this link where I can buy an antenna from -
http://www.gsm4world.us/oem-htc-hd2-t8585-gps-antenna-board-flex-ribbon-cable-d-03752_579.html
That said, I am not too comfortable trying to replace it by myself. Any chance anybody knows a person/shop in the LA area who may have expertise in such jobs? The one I found in Glendale (CellularDR) is the reason this has happened so I'm not too keen on re-visiting them.
Thanks again for all the help!
Can't you get a separate external GPS receiver and bluetooth it?
It kinda beats the purpose of havnig a all in one device, plus you need to always watch 2 batteries and not just one . But, I must say it is the safe option and worth considering.
KT said:
Hi Moon,
I followed the steps in the videos you provided and opened my HD2. The GPS coaxial cable seems to be fit in snug, which I guess is indicative that the GPS antenna itself may have gone bad somehow. Possible?
I did a little searching and found this link where I can buy an antenna from -
http://www.gsm4world.us/oem-htc-hd2-t8585-gps-antenna-board-flex-ribbon-cable-d-03752_579.html
That said, I am not too comfortable trying to replace it by myself. Any chance anybody knows a person/shop in the LA area who may have expertise in such jobs? The one I found in Glendale (CellularDR) is the reason this has happened so I'm not too keen on re-visiting them.
Thanks again for all the help!
Click to expand...
Click to collapse
Hi KT did you manage to solve the issue? i´m having the same problem and i´m thinking if you managed to solve the problem replacing the gps antenna..
thanks
New back housing w/antennas
I had to replace the back housing on my phone as it broke (it looked like the plastic had deteriorated), and the new one comes with all 3 antenna attached, and a new battery cover for less than US 20.00. I have better reception now on all 3 radios, and the phone looks new again. If your have to take it apart anyway, why not replace the whole back? I got it from these people, eBay item 350487086071, but there are tons out there, and it was dead simple. Unscrewed the four screws, used the plastic piece to pop the snaps, and that was it.
YMMV, but for only 20, you can rule out the antennas if nothing else.
mikeeed said:
I had to replace the back housing on my phone as it broke (it looked like the plastic had deteriorated), and the new one comes with all 3 antenna attached, and a new battery cover for less than US 20.00. I have better reception now on all 3 radios, and the phone looks new again. If your have to take it apart anyway, why not replace the whole back? I got it from these people, eBay item 350487086071, but there are tons out there, and it was dead simple. Unscrewed the four screws, used the plastic piece to pop the snaps, and that was it.
YMMV, but for only 20, you can rule out the antennas if nothing else.
Click to expand...
Click to collapse
Hi mate, thank you so much for your reply, great tip, and good to know that is good quality product, and because I have a spare battery cover I bought only the chassis.. great price I will start from there.. thanks once again.
Sent from my HD2 using XDA App