Related
Hello gays!
I hav a problem with my Mda.
In my mda was windows 05 and i want to upgrade to 06
And im download rom from thiece site:
http://forum.xda-developers.com/showthread.php?t=305125
And i Upgrade rom thiece method :
ANOTHER FLASH METHOD :
If you have the chinese WM6 rom, downgrade to some WM5 with official RUU, then:
download this:
http://rapidshare.com/files/29098553...fixed.zip.html
Once you unpack it, please put the nk.nbf (charmer wm6) into the Shelltool folder. Open shelltool.exe. Click Get Rom info, then click Extract OS. Wait until its finished and you'll receive a file called 8004000-OS.nb (save it for later).
Download the xbeta Chinese WM6 rom : http://rapidshare.com/files/27671349...eta.exe. html
Extract it and put that 8004000.OS you saved before in the XBETA directory. In the itsutils folder of xbeta rom you will find enablerapi.cab and cert_spcs.cab. Copy them to your device, install them on Device Memory, then soft reset.
run xbeta.cmd and choose the 8004000OS.nb file to flash (you should be connected with AS and have your radio module turned off).
When the screen goes green and the flashing is finished make a HARD RESET!. Press Camera and Voice Dail buttons (hold them). Put and hold the stylus in reset button for 2 seconds. Release it. Wait until you see some white fonts on black screen. Then release those 2 buttons. Push the green dial button.
I choose thiece method becouse the first method in the rom subject doesnt work.
But after im instal new rom i have Era rom and when im complete upgrading to wm6 the phone is restart and im see era splash screen and its strange for me :/
So the problem is it is in startup screen showin Era splash screen and he STOP! i tried to hard reset but it gives fat partition error.
Please HElp me!
sounds like your device is CID locked at the time you flash it.. which gives you the same splash screen. However, the fat partition error (I presume it said format fail), is a big problem that AFAIK, it has no solution.
What you can do (at least) now is to put your phone in to bootloader mode and flash it (check the wiki, I think there is a section on this).
I turn on boot loader and i upgrade to another rom Era name and still thiece same Can you give me link with rom ?? to my phone ? Yes i dont unlock the cid
http://www.tm-phonedownloads.com/download_manager_mda_com2.html
Now i download my Net is so slowly :d when im download and upgrade i write and good luck to me ;]
Rom t mobile Doesnt work. Other minds?? But the splash screen is T mobile ;]
ipl 2. 06
spl 2.06. 0000
gsm 02.19.21
os 2.6.2.27
meybe Rescue Rom like i wizard ?? do you now where i can find it??
the splash screen indicated that it has already flashed, but, as I've mentioned above, the partition failure are more complicated than that and may not be fixable yourself. I can't help anymore now, you can try to find some other solution. Good luck.
How to unlock cid ?? can you tell me what i hawe g 3 or g 4
at the top section of this screen, there is this "XDA-Wiki", go in to the 'Wizard' section. G3 G4 CID unlock info is there.
Raptorgda said:
I turn on boot loader and i upgrade to another rom Era name and still thiece same Can you give me link with rom ?? to my phone ? Yes i dont unlock the cid
Click to expand...
Click to collapse
""Splash screen freezing -> SOLUTION !!! DIY
--------------------------------------------------------------------------------
Damn... I walked around and around and solution was all near me and able to do it myself...
Ok here´s how I done it.
First, I must explain what was the problem.
After update the firmware (not actually upgrade, I had the phone full of trash, so I decided to reflash same firmware v2.18 PTG), the Qtek 9100 / HTC Wizard freezed at 2nd splash screen (the one that shows OS versions IPL version, ect). Tried many different versions, upgraded to 2.24, 2.25, downgraded even to 1.6.7.3, but always same problem, freezed on second splash screen. I read many topics on xda-dev, and seen some people with same problem. Apparently there was 2 solutions. 1- send phone back to warranty. 2- write backup ROM from SD in bootloader.
Passed more then 15 hours asking for this SD backup everywhere, and COULDN´T find any help. Apparently no one had this "SD dump ROM Backup".
So here´s how I solved my problem
1- I tought that a SD backup was needed, and yes it is. But u can use your own phone and your own SD to do it.
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Thanks to all and hope this helps more people with this problem""
In Wizard forum
Oszi link doesnt work Do you have other??
Doesnt work sesion like that :
r2sd all
Get_BitData
***** user area size = 0x7A80000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512 And stop hiere
You have Wizard but i have mda 2 compact do you now?? ;]
But i have a idea can you give me backup files?? on cd card ?? i will put it on my sd card
Raptorgda said:
Doesnt work sesion like that :
r2sd all
Get_BitData
***** user area size = 0x7A80000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512 And stop hiere
You have Wizard but i have mda 2 compact do you now?? ;]
But i have a idea can you give me backup files?? on cd card ?? i will put it on my sd card
Click to expand...
Click to collapse
Yes I know!I have MDA cII to and not wizard!
You must other MDA cII !your pda is dead you must other mda cII and save the rom the new mda cII.
He say maybe work other Pda (mda c,mda cII,prophet and more)
(sorry my bad english)
I will put Sd card with backup from my own wizard meybe it is will be work if not i take backup from my firend (he have mda 2 c ) Sory for my bad english!
I will put Sd card with backup from my own wizard meybe it is will be work if not i take backup from my firend (he have mda 2 c ) Sory for my bad english!
Format Is Failed (!?)
Hi. I know that the focus is now on the new ROM, but I am having a problem with my MDA Compact II after following the alternative flashing method. Original details:
IPL 1.12, SPL 1.12.0000, GSM 01.11.20, OS 1.12.2.23
All seemed to go ok, following step by step as per http://forum.xda-developers.com/attachment.php?attachmentid=39129&d=1179243687 and I got to the end step with ‘Congratulations’. I had no error messages. However upon hard reset I got the message: FORMAT FAT PARTITION, FORMAT IS FAILED (oops!)
The screen then showed the same details as before, but with OS now 10.2.0.8.
I’ve done some searching on the Forums & tried restoring the phone via bootloader using both “MDAc2_ROM_Johnnnnnnnnnny_v1.0” (stalls at 99%) and “RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship” (this completes 100% & reverts the OS to 1.12.2.23, but I get the same FORMAT IS FAILED message).
Any further suggestions how I can revert to the original state, or update to WM6?
(My wife has an MDA II as well – I’ve checked my battery in her phone & it is fully charged).
PS Ignore the details at the bottom - I also have an MDA COMPACT (I)
Chameleon846: if you read carefully, you would know that you need at least bootloader in ver. 2.x to flash WM6. And seeing you have 1.x, no wonder it didnt flash poperly. GO find an official HTC Prophet rom and flash it with RUU. It will help.
no problem with this, this happen time after time on every ppc, it's random flashing error.
http://forum.xda-developers.com/showthread.php?t=307332
please, read forums before asking, this was mentioned many times...
vlodeck, thanks. A little knowledge... I stupidly missed the 2.x bit...
I've tried the RUU method with an official ROM. It completes all 100%, but will not go any further. I've seen bits about a restore from an SD card, but can't find the exact method (copying the nk.nbf file to SD & running bootloader doesn't do anything. If I manage to sort this am I able to upgrade the bootloader to 2.x?
Thanks.
Chameleon: not charmer official ROM. Prophet ROM!
Hello I have a blueangel Ph20b2 aka Qtek9090 try an upgrade of the rom and ruling .. I was just turning on the device with serial and V2.07 I can do .. I have read by the network that has been left without the Romany and non interacts between soft and hard .. There is some system to revive .. Some software anything .. Since connect the PDA at the base i usb of the laptop does not recognize no nothing.
Eeeeehmmmm, yes, nice. But we do not understand a word. Was it google-translated or something?
If you did something wron during upgrade, just do the upgrade again. Follow the procedure step after step, do not omit even one step - try to understand what are you doing and what for.
Without more understandable information (about what were you doing and what is happening) we cannot help you.
Stupid mistake - Serial 2.07
Reading between the lines of the original post I suspect the author has done the same as me - or at least ended up with the same result. Anybody know of a fix.
Cause; I attempted to restore from backup over wifi (yes wifi - I was desperate & didnt have the cradle available).
Result; my XDA 2s went blank and now displays a screen displaying "Serial V2.07" (or "USB V2.07" when in the cradle). No amount of re-attempting to re-connect to the device works. I'v tried soft / hard resets / battery removal etc. I'm using Microsoft ActiveSync V4.5. The XDA is an O2 badged variant.
I suspect I'm looking for a boot strap load program that will repair the xda rom such that i can subsequently reload its operating system. Any positive suggestions gratefully received.
just found reference to putting xda2s into bootloader mode "soft reset button,power button and center of D-pad button together" - this still leaves the screen saying "Serial v2.07" - Am I already in bootloader mode? - if it is what do I do next?
Fixed
problem solved - I went back to the 2nd posters answer and attmpted from the begining to install Xda_IIs_Upgrade_v140242.exe, ignoring what was on the xda screen & it worked.
I now have a functioning xda - but I still have with the problem I was trying to solve in the first place.
After a the xbackup restore, the xda desktop isnt re-written cleanly, it overlays semi-transparently on top of the last program run. The desktop accepts stylus commands to run programs which open and display cleanly. How can I clean this up - I dont want to loose O/S DBs e.g. my messages etc. - I dont see a way I can port them across upgrades so I can not just stick with the Xda_IIs_Upgrade_v140242.exe
I feel if they have not understood anything written .. I do not understand Spanish and in English .. I have the problem of serial V.2.07 screen .. Where can I download a rom for qtek9090. In my pda you do a hard reset buttons with record power + + reset and still continues to do nothing with serial on the screen .. If there is any mistake in what they write what I am using the translator google
i got the same problem ...screen saying "Serial v2.07" - Am I already in bootloader mode? - if it is what do I do next?
hate to throw my phone in the garbage can
please someone help meee
anybody found any news?
still in bootloader mode, error 112 at stage 3. BA turns off when trying to update.
2much 4me
anybody come back from this point to wm3?
Hi!
this is my first post here, so sorry for my bad english or mistakes
i bought a qtek 9100 on ebay, and i'm wondering if it's a brick or not. i received the device 3 days ago. during this time i read through a LOT of threads here, tried a few things and nothing works.
here is some info:
- the phone is a qtek 9100 without branding
- the IPL is now 1.01 (i flashed "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE" successfully)
- the SPL is 2.18 (because of the missing suffix ".0001" i guess it's a G3)
- GSM is 01.12.10
- OS is 1.5.4.2
- when i start the device (without any button pressed) it stops at the splash screen (which was a qtek logo before flashing, and is now this picture with a beer, that says "some things last forever" )
- i can get into bootloader screen (color screen) by holding camera button while starting
- in bootloader screen a small "USB" appears when i connect cable to usb on pc
- when i press communicate and voice buttons (on the sides) while starting, the "Press send to restore factory default" screen appears, but pressing send prints out "Format FAT Partition Format is Failed"
- the device gets recognized by windows ("Mobile Device" appears on my computer)
- ActiveSync 4.5 does not connect to device, not even as guest.
- when i hit "Connect..." in ActiveSync's connection settings, nothing is found
("Allow USB Connections" is ON)
- the device is CID-locked ("FF" state in Mtty 1.42)
- i can't unlock CID, because i can't get "EnableRapi.cab" onto the device without ActiveSync connection
Ok, these are basically the things i know now. The problem is that i never saw any other screen then the "HTC" boot screen, the "Qtek" splash logo (the one with the clouds) before i flashed with custom ruu wwe, after that i see the new splash logo, and i can get into bootloader (color) screen. I never saw any windows mobile running on this device! I could never establish a connection with ActiveSync!
So i hope that someone here on this nice forum can help me get this device to work (WM5 would even be enough right now) or at least give me a hint!
Thanks in advance!
Put the phone in bootloader mode and flash back to the original ROM.
since i bought it in ebay i don't have the original rom of this device.
but i found "233309-qtek9100_2180707_21807109_20710_qtek_ger_ship.exe" through google, which seems to be an original qtek rom (version 2.18). shall i flash this one?
You can find in the Wiki the latest official roms of every brand for our Wizards .-
ok, thanks.
i found one (Qtek GER 2.18.7) and flashed it. the process was successfull, now the IPL/SPL is both 2.18 . But the device still doesn't start and stops at the splash screen (which is now the original qtek splash again). I can still get into bootloader mode and hard reset results in "Format is failed"! No ActiveSync connection either... how should i proceed now?
i basically narrowed it down to these two problems:
- the splash screen freezes
- hard reset error "Format is failed"
( IPL: 2.18, SPL: 2.18 )
can't anybody help please?
i'm freaking out about this
With everything i’ve read the only people who’ve had any success had CID unlocked devices.
ok, i think that too for what i've read so far...
is there any other way of CID unlocking except lokiwiz (can't copy enablerapi.cab without activesync!)?
would this imei-check service that i've read about work in this case?
meanwhile i've also tried something with mtty (r2sd all) but doesn't work -> "didn't get proper security level"
is this also because of the CID lock? i tried to find out the right password to enter in mtty, but found nothing that worked...
does anybody know the correct password?
I couldent CID unluck my 9100 with lokiwiz so i did it 5min ago with Wizard Service Tool (ha to reboot my computer).
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Look up the orignal rom on the wiki, get into bootloader. And flash it back.
Jodda said:
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Click to expand...
Click to collapse
Jodda said:
I'm having the exact same problem,
except I can't flash any other ROMS so I'm stuck looking at this incredibly frustrating beer picture, with "some things last forever".
Does anyone have any further ideas?
Click to expand...
Click to collapse
Hi Friend!
I have the same problem with my Qtek9100!
Any ideas? have you solved your problem?
I have the frustrating beer picture
Please help me.
Very Thanks
Like I sad before
Get into bootloader, flash back the original rom and try again.
mizobuchi said:
Hi Friend!
I have the same problem with my Qtek9100!
Any ideas? have you solved your problem?
I have the frustrating beer picture
Please help me.
Very Thanks
Click to expand...
Click to collapse
I put the original rom.
But... the problem is the same.
when I started the device (without any button pressed) it stops at the splash screen (which has a qtek logo before flashing)
- i can get into bootloader screen (color screen) by holding camera button while starting, I installed the original and others rom who days before works perfectly... Now... this stopped at splash screen
- when I tryed to format.. = "Format FAT Partition Format is Failed"
Any idea?
I have tried this : http://forum.gsmhosting.com/vbb/showthread.php?t=332143
but... without success.
Could you help me, please?
Very Thanks
i'm still stuck with the same problem with hang up on qtek splash screen, too!
i have IPL 2.18 and SPL 2.18 and i can get in boot loader screen and connect with usb. (but no activesync connection!)
formatting doesn't work either.
does anybody have an idea how to solve this?? it's frustrating... i've tried almost every guide here on the forums.
same proplem here with
ipl 2.16
and spl 2.16
I used this to fix this problem
Hi i had the same problem the other week, installed a dodgy app, went to do a hard reset and wouldn't do a hard reset format failed. Tried updating rom everything worked ok until you booted it up. Wouldn't go past second splash sreen. After a few hours of trawling round i found this thread.
http://forum.xda-developers.com/showthread.php?t=276963&highlight=format+is+failed
worked for me. Hope this helps you out.
Problem in connecting to my PC
Hey ,
I just bought a qtek 9100 a day before ... I tried to connect it with my computer.. instead of connecting my battery gets charging well can u plz help me out !
is there any software that i should install in my pc in order to get it connected to my PC...... please help me fast ! Lot of work is pending !
Thanks
Salman
Ok guys, I finally have this SOLVED.
My QTEK 9100 is working fine now!!!
I'm so happy with it right now
Since nothing I tried worked, I went to imei-check.co.uk and got my phone completly unlocked! It only cost me about 11€ and since it works now I have to admit that it was worth it (no advertising). After the unlocking was done I could do the "r2sd all"-method (Tool: MTTY 1.42) using a miniSD card. You can find a good tutorial on this board somewhere. After that everything was just fine...
-> I never saw it working and Hell Yeah: This baby just kicks a$$ !!! (although it's kinda 'oldschool' these days )
Hello, i was tired of duttys rom so i decided to install the orginal 6.5 windows rom.
It got to 16% and then it got stuck, i tried again a couple of times but it stopped at 16% all the time.
Then i tried to hard reset it, nothing.
Now i tried to install the newest dutty rom.
Now i'm stuck at the "Touch diamond 2" loading screen.
How the hell do i fix it?
Also it loads the RGD thing, but then it just freezes
Please help :s
What does your SPL show?
My spl? Do you mean the RGD thing? if so:
R: 4.49.25.91
G: 61.44etc.25.35U
D 2.53.Dutty
No, put the topaz in bootloader and you can see your actual SPL
SPL-1.33.0linex (stupid 5 mins for edit..)
- Turn off your device using the power button
- When the device is turned off press simultaenously the volume down button + Power button
- Your device will startup in Bootloader mode with band tricolor
Thanks for the help. You sure saved my weekend.
(Got help over pm)
**Deleted**
Nuggi, would you be so kind and share the info with the rest of us, as I have exact same problem as you did in the first post.
Phone dropped to ground, screen got bit smashed so I thought to send it to repair. I put original SPL and 6.1 rom inside and boom, doesn't boot anymore.
EDIT: Found this post, checking now if it works. http://forum.xda-developers.com/showthread.php?p=7191733#post7191733
EDIT2: Success! The software started all fine.
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
try get a hammer and gently hit it as hard as you can for a couple times. here it is! you got a new radio version. i did this with my kaiser because i do not understand why i was so naive when i bought this piece of s#it!
thehou said:
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
Click to expand...
Click to collapse
should make sure you Kaiser is "application unlocked", run SDA_ApplicationUnlock installed on your PC then copy sspl 1.56.exe to your device and run it !!!! to solve the problem on the device you must try hard reset at device (Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data )
lexpet said:
try get a hammer and gently hit it as hard as you can for a couple times. here it is! you got a new radio version. i did this with my kaiser because i do not understand why i was so naive when i bought this piece of s#it!
Click to expand...
Click to collapse
Hei dude , you really crazy lexpet <<<< Crzy
Hakim Rahman said:
should make sure you Kaiser is "application unlocked", run SDA_ApplicationUnlock installed on your PC then copy sspl 1.56.exe to your device and run it !!!! to solve the problem on the device you must try hard reset at device (Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data )
Click to expand...
Click to collapse
yow bro dont worry here is a thread that will set set you right its everything about radio that just helped me : http://forum.xda-developers.com/showthread.php?t=393182
thehou said:
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000
Click to expand...
Click to collapse
rom to MyPPC_MLs_K3.1_0816.zip also check the radio version the uploader who left the rom uses that can be of great help since you will know which one to use.
I have my shares of problems when i comes to this same issue so i took the time out to help you. Cheeer man
Moving to General because the Question is NOT DEVELOPMENT related.
Hello ALL and thank's for your reply,
First to restart my mobile phone I have used the mtty.exe with this manipulations :
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.
founded HERE
Second problem is to update radio, I have mysteriously found a link to a ROM update of orange France, after installing iit, my radio become 1.65.16.25 with WM6.1, I wasn't satisfied with the orange rom so I tried to install the MLS K3.1,
AND NOW .... all it's ok, sound, photo, bluetooth.
One more question please : do you think that I use my mobile with this radio or it's better to me to update it to 1.71.... is there a very difference or no ???
Link to ROM Orange France wm6.1 August 2008 HERE
Hello,
now I have another problem, I think that it's big one, I think that it's a big one, I explain.
I tried to install a new dialer, so I installed it into the phone, the phone restart ... and now nothing, he reboot continually.
I tried mtty with set 16 0, task 8, after task 0, and here he doesn't boot, I see the orange logo with the r ... g ... B .... in the left down and here STOP.
I tried Hard reset, 100 % ok BUT NOW I see only logo of Orange but not radio version, from version, nothing only the Orange logo.
So I flash with the original ROM of Orange, all is ok until 100 % but the same, he reboot, I see orange logo, 5 seconds after he rebbot another time, Orange logo, 5 seconds, reboot ....
Please help me to resolve the problem.
after 5 minutes without battery, I get the information in the left down and the mobile start with the WM6.1.
So I can't install a new dialer :-((
Thank's a lot
thehou said:
Hello,
now I have another problem, I think that it's big one, I think that it's a big one, I explain.
I tried to install a new dialer, so I installed it into the phone, the phone restart ... and now nothing, he reboot continually.
I tried mtty with set 16 0, task 8, after task 0, and here he doesn't boot, I see the orange logo with the r ... g ... B .... in the left down and here STOP.
I tried Hard reset, 100 % ok BUT NOW I see only logo of Orange but not radio version, from version, nothing only the Orange logo.
So I flash with the original ROM of Orange, all is ok until 100 % but the same, he reboot, I see orange logo, 5 seconds after he rebbot another time, Orange logo, 5 seconds, reboot ....
Please help me to resolve the problem.
Thank's a lot
Click to expand...
Click to collapse
try for radio upgrades, maybe it can help you! you can look here ===>> http://forum.xda-developers.com/showthread.php?t=393182 try to continue and do not despair
Hakim Rahman said:
try for radio upgrades, maybe it can help you! you can look here ===>> http://forum.xda-developers.com/showthread.php?t=393182 try to continue and do not despair
Click to expand...
Click to collapse
Salam, thank's for your response
From the last install of dialer and the bug of reboot, I have reflash my tytnii correctly BUT the problem that I have now is when my sim card is installed, the phone reboot systematically.
If I leave the simcard in the phone but I start with the Off line mode, it's ok, Just I change the mode to telephone here .... reboot ...... what the dialer have made in my phone ???????
thehou said:
Salam, thank's for your response
From the last install of dialer and the bug of reboot, I have reflash my tytnii correctly BUT the problem that I have now is when my sim card is installed, the phone reboot systematically.
If I leave the simcard in the phone but I start with the Off line mode, it's ok, Just I change the mode to telephone here .... reboot ...... what the dialer have made in my phone ???????
Click to expand...
Click to collapse
I think you get caught by Simdoor issue ...! try to search for sim unlock program for kaiser and install on your PC !!! You can find it here -->> http://forum.xda-developers.com/showthread.php?t=375583