Database Develop

please please help!

hi I Have a problem but my tablet its "soft bricked" goes into recovery mode with the android man and the white box but if i try and select that with the volume up button it just turns off here is what i have been told too do
1) Download this file:
2) Put the file on your internal storage.
3) Reboot into recovery-------------------------I can do
4) Execute the Wipe Data/Factory Reset option-----------------------cant do!
5) Choose Install Zip from SD Card--------------Cant do!
6) Choose Choose Zip from SD Card----------------------Cant do1
7) Select the P7310UEKHA_Restock_v1.zip--------Cant do!
8) Sit back, wait about 5 minutes
9) Once the script completes and says "Done", reboot.
10) Welcome to a completely stock US Retail tab
any help would be very much appreciated I'm rooted and was wondering if sent it back to Samsung would they know? im rooted because if i cant get access to anything they wont be able to will they?

Can you get in Download mode? If yes then just flash stock firmware with Odin.

[Q] how to BACKUP and RESTORE stock ROM on Galaxy Ace S5830i?

Hello xda people please help me with this issue
I want to try a new ROM!! so i want to backup my stock ROM.
can u people please tell me how to backup(ROM+APPLICATIONS) and Restore the ROM in easy words with full steps thank you.

1. Make sure your SD Card has about 500MB Free. - If not clear some downloads and other files you don't need.
Backup Apps
Download Titanium Backup
1. Click on the Backup tab and select the apps you would like to backup.
2. Start the backup. - This could take some time.
Backup ROM
1. You need ClockWorkMod download V.5.0.2.6 Here.
2. Copy ClockWorkMod to your SD Card. - Make sure you have the right Drivers, for your device to connect to the PC.
3. Turn off your phone.
4. Press Home + Power. - Press home first and hold it.
5. You will get to the stock recovery, Select flash a Zip.
6. After the flashing is completed select "Reboot the Device".
7. Press and hold Home + Power again. - This time the Recovery will look a bit different, more features.
8. Select "Backup/Restore".
9. And then "Backup". - This takes a while, go drink a cup of joe.
To Flash a ROM. - Just in case.
Flash Custom ROM:
1) Select Custom ROM
2) Put Custom ROM .zip onto your SD Card
3) Turn off your phone
4) Press Power+ Home button
5) Select Wipedata/factory reset. - You can wipe the cache too.
6) Select "Install zip from SD card"
7) Select "Choose zip"
8) Select .zip with your Custom ROM
9) Select "Yes"
10) Then finally select "Reboot system".
Restore the ROM - UhOh something went wrong.
1. Reboot to recovery again. Home + Power.
2. Select "Backup/Restore"
Then there is two options you can choose from. - Restore and Advanced Restore. With Advanced restore you can select to restore only your "data" folder, which is your apps by the way. And your "system" folder which is the Core of the ROM with no extra's. With the normal Restore everything gets restored.
3. Select your Restore option. - Takes a while!
4. Select "Reboot Device".

It did thanks
PulseDroid said:
1. Make sure your SD Card has about 500MB Free. - If not clear some downloads and other files you don't need.
Backup Apps
Download [/URl=https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en]Titanium Backup[/URL]
1. Click on the Backup tab and select the apps you would like to backup.
2. Start the backup. - This could take some time.
Backup ROM
1. You need ClockWorkMod download V.5.0.2.6 Here.
2. Copy ClockWorkMod to your SD Card. - Make sure you have the right Drivers, for your device to connect to the PC.
3. Turn off your phone.
4. Press Home + Power. - Press home first and hold it.
5. You will get to the stock recovery, Select flash a Zip.
6. After the flashing is completed select "Reboot the Device".
7. Press and hold Home + Power again. - This time the Recovery will look a bit different, more features.
8. Select "Backup/Restore".
9. And then "Backup". - This takes a while, go drink a cup of joe.
To Flash a ROM. - Just in case.
Flash Custom ROM:
1) Select Custom ROM
2) Put Custom ROM .zip onto your SD Card
3) Turn off your phone
4) Press Power+ Home button
5) Select Wipedata/factory reset. - You can wipe the cache too.
6) Select "Install zip from SD card"
7) Select "Choose zip"
8) Select .zip with your Custom ROM
9) Select "Yes"
10) Then finally select "Reboot system".
Restore the ROM - UhOh something went wrong.
1. Reboot to recovery again. Home + Power.
2. Select "Backup/Restore"
Then there is two options you can choose from. - Restore and Advanced Restore. With Advanced restore you can select to restore only your "data" folder, which is your apps by the way. And your "system" folder which is the Core of the ROM with no extra's. With the normal Restore everything gets restored.
3. Select your Restore option. - Takes a while!
4. Select "Reboot Device".
Click to expand...
Click to collapse
thanks it did!! as i was stuck in samsung logo after flashing custom rom. so i went and recovered thank you.
can u suggest me some best ROMS for Galaxy ACE?? thanks in advance :good:

sect0r8 said:
can u suggest me some best ROMS for Galaxy ACE?? thanks in advance :good:
Click to expand...
Click to collapse
There is no such thing how good a Rom is depends on a user's preferences as such only u can answer that question
Phone Slow? go ------>HERE<------
Ubuntu phone OS announced
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what do u think share your thoughts --->HERE<---
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
--Sent from the future with a galaxy s4 running ubuntu like a freaking BAWS-- ​

Oh ok. Iam searching for a neat ROM with nice features.
Can u help me with the game issues? Follow the link and thanks :beer:
http://forum.xda-developers.com/showthread.php?t=2128690
Sent from my GT-S5830i using xda app-developers app

Again as said earlier questions like these are frowned upon they usually result in an argument also just because one person likes a Rom doesn't mean you will to try the roms for yourself and then you'll know what u like
Phone Slow? go ------>HERE<------
Ubuntu phone OS announced
what do u think share your thoughts --->HERE<---
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
--Sent from the future with a galaxy s4 running ubuntu like a freaking BAWS-- ​

OK il find a from myself and thanks
Sent from my GT-S5830i using xda app-developers app

Ur welcome
Phone Slow? go ------>HERE<------
Ubuntu phone OS announced
what do u think share your thoughts --->HERE<---
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
--Sent from the future with a galaxy s4 running ubuntu like a freaking BAWS-- ​

Can u plz help me out with this?? Link bellow
http://forum.xda-developers.com/showthread.php?t=2128690
Sent from my GT-S5830i using xda app-developers app

crazymetalhead666
PulseDroid said:
1. Make sure your SD Card has about 500MB Free. - If not clear some downloads and other files you don't need.
Backup Apps
Download [/URl=https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en]Titanium Backup[/URL]
1. Click on the Backup tab and select the apps you would like to backup.
2. Start the backup. - This could take some time.
Backup ROM
1. You need ClockWorkMod download V.5.0.2.6 Here.
2. Copy ClockWorkMod to your SD Card. - Make sure you have the right Drivers, for your device to connect to the PC.
3. Turn off your phone.
4. Press Home + Power. - Press home first and hold it.
5. You will get to the stock recovery, Select flash a Zip.
6. After the flashing is completed select "Reboot the Device".
7. Press and hold Home + Power again. - This time the Recovery will look a bit different, more features.
8. Select "Backup/Restore".
9. And then "Backup". - This takes a while, go drink a cup of joe.
To Flash a ROM. - Just in case.
Flash Custom ROM:
1) Select Custom ROM
2) Put Custom ROM .zip onto your SD Card
3) Turn off your phone
4) Press Power+ Home button
5) Select Wipedata/factory reset. - You can wipe the cache too.
6) Select "Install zip from SD card"
7) Select "Choose zip"
8) Select .zip with your Custom ROM
9) Select "Yes"
10) Then finally select "Reboot system".
Restore the ROM - UhOh something went wrong.
1. Reboot to recovery again. Home + Power.
2. Select "Backup/Restore"
Then there is two options you can choose from. - Restore and Advanced Restore. With Advanced restore you can select to restore only your "data" folder, which is your apps by the way. And your "system" folder which is the Core of the ROM with no extra's. With the normal Restore everything gets restored.
3. Select your Restore option. - Takes a while!
4. Select "Reboot Device".
Click to expand...
Click to collapse
hey
there was no flash a zip in my stock recovery so I chose the option 'install an update from sd card' now after restarting the phone with the home button & the power button pressed my phone starts normally...I cannot access my recovery screen:crying: also I have an app CWM installed after this which on tapping shows the error 'CWM manager needs SuperUser access to function' HELP ME! plzzz

Info
This ClockWorkMod version was tested on S5830I? It's permanent or needs to be flashed anytime is I wanna use it?
Thanks a lot.

HELPPP
:crying::crying::crying::crying::crying::crying: PLEASE HELP! IT WENT WELL UNTIL I RESTORED AFTER ADDING CUSTOM ROM. THEN WHEN I REBOOT ITS STUCK AT THE MODEL NUMBER SCREEN!!! IS THIS NORMAL???
PulseDroid said:
1. Make sure your SD Card has about 500MB Free. - If not clear some downloads and other files you don't need.
Backup Apps
Download [/URl=https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en]Titanium Backup[/URL]
1. Click on the Backup tab and select the apps you would like to backup.
2. Start the backup. - This could take some time.
Backup ROM
1. You need ClockWorkMod download V.5.0.2.6 Here.
2. Copy ClockWorkMod to your SD Card. - Make sure you have the right Drivers, for your device to connect to the PC.
3. Turn off your phone.
4. Press Home + Power. - Press home first and hold it.
5. You will get to the stock recovery, Select flash a Zip.
6. After the flashing is completed select "Reboot the Device".
7. Press and hold Home + Power again. - This time the Recovery will look a bit different, more features.
8. Select "Backup/Restore".
9. And then "Backup". - This takes a while, go drink a cup of joe.
To Flash a ROM. - Just in case.
Flash Custom ROM:
1) Select Custom ROM
2) Put Custom ROM .zip onto your SD Card
3) Turn off your phone
4) Press Power+ Home button
5) Select Wipedata/factory reset. - You can wipe the cache too.
6) Select "Install zip from SD card"
7) Select "Choose zip"
8) Select .zip with your Custom ROM
9) Select "Yes"
10) Then finally select "Reboot system".
Restore the ROM - UhOh something went wrong.
1. Reboot to recovery again. Home + Power.
2. Select "Backup/Restore"
Then there is two options you can choose from. - Restore and Advanced Restore. With Advanced restore you can select to restore only your "data" folder, which is your apps by the way. And your "system" folder which is the Core of the ROM with no extra's. With the normal Restore everything gets restored.
3. Select your Restore option. - Takes a while!
4. Select "Reboot Device".
Click to expand...
Click to collapse
---------- Post added at 04:02 AM ---------- Previous post was at 03:54 AM ----------
AFTER ADDING CUSTOM ROM AND RESSTORING(I FOLLOWED ALL INSTRUCTIONS PRECISELY) MY PHONE WAS STUCK IN A MODEL NUMBER SCREEN. NOW IT IS STUCK IN A BLANK BLACK SCREENNN. I NEED HELP THXX
TingTingin said:
Again as said earlier questions like these are frowned upon they usually result in an argument also just because one person likes a Rom doesn't mean you will to try the roms for yourself and then you'll know what u like
Phone Slow? go ------>HERE<------
Ubuntu phone OS announced
what do u think share your thoughts --->HERE<---
_____________________________________
This post uses the patented TingTingin®™ method I would teach it to you but you are not yet worthy (come back in a hundred years)
--Sent from the future with a galaxy s4 running ubuntu like a freaking BAWS-- ​
Click to expand...
Click to collapse

AshiqNoorImran said:
:crying::crying::crying::crying::crying::crying: PLEASE HELP! IT WENT WELL UNTIL I RESTORED AFTER ADDING CUSTOM ROM. THEN WHEN I REBOOT ITS STUCK AT THE MODEL NUMBER SCREEN!!! IS THIS NORMAL???
---------- Post added at 04:02 AM ---------- Previous post was at 03:54 AM ----------
AFTER ADDING CUSTOM ROM AND RESSTORING(I FOLLOWED ALL INSTRUCTIONS PRECISELY) MY PHONE WAS STUCK IN A MODEL NUMBER SCREEN. NOW IT IS STUCK IN A BLANK BLACK SCREENNN. I NEED HELP THXX
Click to expand...
Click to collapse
Oh my god
First of all, which device model have you? GT-S5830 or GT-S5830i?
It's not normal, can you boot into recovery mode?

Edited: "Backup ROM" step 5
I follow this guide (using a samsung ace GT-S5830) and there is a difference in "Backup ROM" step 5 for me.
Backup ROM
1. You need ClockWorkMod download V.5.0.2.6 Here.
2. Copy ClockWorkMod to your SD Card. - Make sure you have the right Drivers, for your device to connect to the PC.
3. Turn off your phone.
4. Press Home + Power. - Press home first and hold it.
5. You will get to the stock recovery, Select flash a Zip. ***
6. After the flashing is completed select "Reboot the Device".
7. Press and hold Home + Power again. - This time the Recovery will look a bit different, more features.
8. Select "Backup/Restore".
9. And then "Backup". - This takes a while, go drink a cup of joe.
Click to expand...
Click to collapse
*** For me there is no "Select flash a Zip" option, so I Selected "Update from sdcard", and then Selected the file "recovery-clockwork-5.0.2.6-galaxyace-fix.zip".
Also, when my device booted, I opened the ClockWorkMod app and I make a backup from inside app.
The CWM V.5.0.2.6 is much better of the official. Smooth and problems free.

Galaxy Nexus7 Update Failure Fix

1. Download the toolkit herehttp://forum.xda-developers.com/showthread.php?t=1809195
2. Install the toolkit to the default C:\ folder it tells you to
3. When launching the toolkit it will ask you which version of android you're running. 2.2
4. Install the device drivers (option 1)
5. Download 4.3 from here: https://developers.google.com/android/nexus/images (specifically download ' Factory Images "nakasi" for Nexus 7 (Wi-Fi), version 4.3 (JWR66V))
6. Put the factory image in: C:\Google_Nexus_7_ToolKit\put_google_factory_image_here\
7. Turn off your Nexus 7, turn it back on holding the power button and both volume + and volume -
8. Plug in the USB cable
9. Select "option 3 - unlock / relock bootloader" and follow the steps, it will the come up on the Nexus 7 telling you you're about to unlock it; us the volume buttons and power button to select ok
10. Select "option 9 - Download, Extract and Flash google factory stock rom"
11. Select "option 2 - flash google factory image" on the next screen
12. Follow the instructions typing yes where it needs (Note. the checksum did not match), keep following the instructions..
13. Device will reboot after it transfers across and boot into 4.3 - complete the setup process
14. After the setup process is finished, plug it back in and select 'option 3' and relock the bootloader!!
And BOOYA There you have it :highfive:
So What goes into the folder "put_google_factory_image_here" YOU ASK
You put the unextracted .tgz in the folder. The program will extract it for you​
Other options for Nexus7= reinstall firmware 4.2.2 using the Google Nexus 7 Toolkit (found at:http://forum.xda-developers.com/showthread.php?t=1809195 WARNING: THIS DOES WIPE YOUR DATA! BACKUP FIRST!Then do an update to 4.3 then rooted using CF Auto Root (found at: http://www.redmondpie.com/how-to-root-android-4.3-on-nexus-4-7-10-and-galaxy-nexus/
I'AM NOT RESPONSIBLE FOR BRICKING OR ANY DAMAGE TO YOUR DEVICE

Wrong section mate. Mods will be moving this thread to the correct forum soon.

immortalneo said:
Wrong section mate. Mods will be moving this thread to the correct forum soon.
Click to expand...
Click to collapse
Don't think it's in the wrong section... just wrong title. The content is certainly Nexus 7 related...
@keifus.rahn ... you should edit your thread title. I suspect it should read 'Nexus 7 Update Failure Fix'.
Rgrds,
Ged.

Change Tittle to Nexus 7 Update Failure Fix)
keifus.rahn said:
1. Download the toolkit herehttp://forum.xda-developers.com/showthread.php?t=1809195
2. Install the toolkit to the default C:\ folder it tells you to
3. When launching the toolkit it will ask you which version of android you're running. 2.2
4. Install the device drivers (option 1)
5. Download 4.3 from here: https://developers.google.com/android/nexus/images (specifically download ' Factory Images "nakasi" for Nexus 7 (Wi-Fi), version 4.3 (JWR66V))
6. Put the factory image in: C:\Google_Nexus_7_ToolKit\put_google_factory_image_here\
7. Turn off your Nexus 7, turn it back on holding the power button and both volume + and volume -
8. Plug in the USB cable
9. Select "option 3 - unlock / relock bootloader" and follow the steps, it will the come up on the Nexus 7 telling you you're about to unlock it; us the volume buttons and power button to select ok
10. Select "option 9 - Download, Extract and Flash google factory stock rom"
11. Select "option 2 - flash google factory image" on the next screen
12. Follow the instructions typing yes where it needs (Note. the checksum did not match), keep following the instructions..
13. Device will reboot after it transfers across and boot into 4.3 - complete the setup process
14. After the setup process is finished, plug it back in and select 'option 3' and relock the bootloader!!
And BOOYA There you have it :highfive:
So What goes into the folder "put_google_factory_image_here" YOU ASK
You put the unextracted .tgz in the folder. The program will extract it for you​
Other options for Nexus7= reinstall firmware 4.2.2 using the Google Nexus 7 Toolkit (found at:http://forum.xda-developers.com/showthread.php?t=1809195 WARNING: THIS DOES WIPE YOUR DATA! BACKUP FIRST!Then do an update to 4.3 then rooted using CF Auto Root (found at: http://www.redmondpie.com/how-to-root-android-4.3-on-nexus-4-7-10-and-galaxy-nexus/
I'AM NOT RESPONSIBLE FOR BRICKING OR ANY DAMAGE TO YOUR DEVICE
Click to expand...
Click to collapse
Change Tittle to: (Nexus 7 Update Failure Fix)

immortalneo said:
Wrong section mate. Mods will be moving this thread to the correct forum soon.
Click to expand...
Click to collapse
Ok sorry about that :silly:

zcucurullo said:
Change Tittle to: (Nexus 7 Update Failure Fix)
Click to expand...
Click to collapse
Ok will do sir

Fix bricked LGK8 (LG-K350n) (Europe)

Today i will be showing you how to fix a bricked LGK8 (2017 model). This will work for you if you have bricked with SuperSU or custom roms.
1) First of all you will need a working computer running Windows (10 is recommended).
2) Download all the needed files at this Mediafire link Today i will be showing you how to fix a bricked LGK8 (2017 model). This will work for you if you have bricked with SuperSU or custom roms.
1) First of all you will need a working computer running Windows (10 is recommended).
2) Download all the needed files at this Mediafire link Today i will be showing you how to fix a bricked LGK8 (2017 model). This will work for you if you have bricked with SuperSU or custom roms.
1) First of all you will need a working computer running Windows (10 is recommended).
2) Download all the needed files at this Mediafire link "file/1q394stxkmjn6xx/LG%20K350n%20K8.rar"
(Link was blocked just add mediafire stuff at the start, Sorry)
3) Install the drivers and installer in the download.
4) Turn off your device, Once it is off hold the volume up button and plug your phone into your computer while still holding the volume up button.
5) You should now see the LG logo and "Download Mode" at the bottom of the screen. A menu will popup and it will say "Firmware Update"
6) "DO NOT!" unplug your device from the computer.
7) Open up LGUP on your computer (We installed this earlier, It was in the download folder)..
8) LGUP will open and you should see a line where it says Version "K35010g" and Progress "STANDBY"
9) Go to the bottom of the menu where it says "BIN File", click on the text and you will see a option to select a ".kdz" file.
10) Select the file that was in the download named "K350n10g_00_0504.kdz"
11) Once it is selected and you see the file name in the File Path menu Click "UPGRADE" above it.
12) Now click "Start" DO NOT UNPLUG YOUR DEVICE AT THIS TIME.
13) Wait for the process to complete, It may take several minutes.
14) Once all is done your device is now ready to be used again. You have completed the unbrick.
PS: Do not unplug until your device boots to Setup or Lock Screen or Home Screen.
3) Install the drivers and installer in the download.
4) Turn off your device, Once it is off hold the volume up button and plug your phone into your computer while still holding the volume up button.
5) You should now see the LG logo and "Download Mode" at the bottom of the screen. A menu will popup and it will say "Firmware Update"
6) "DO NOT!" unplug your device from the computer.
7) Open up LGUP on your computer (We installed this earlier, It was in the download folder)..
8) LGUP will open and you should see a line where it says Version "K35010g" and Progress "STANDBY"
9) Go to the bottom of the menu where it says "BIN File", click on the text and you will see a option to select a ".kdz" file.
10) Select the file that was in the download named "K350n10g_00_0504.kdz"
11) Once it is selected and you see the file name in the File Path menu Click "UPGRADE" above it.
12) Now click "Start" DO NOT UNPLUG YOUR DEVICE AT THIS TIME.
13) Wait for the process to complete, It may take several minutes.
14) Once all is done your device is now ready to be used again. You have completed the unbrick.
PS: Do not unplug until your device boots to Setup or Lock Screen or Home Screen.
3) Install the drivers and installer in the download.
4) Turn off your device, Once it is off hold the volume up button and plug your phone into your computer while still holding the volume up button.
5) You should now see the LG logo and "Download Mode" at the bottom of the screen. A menu will popup and it will say "Firmware Update"
6) "DO NOT!" unplug your device from the computer.
7) Open up LGUP on your computer (We installed this earlier, It was in the download folder)..
8) LGUP will open and you should see a line where it says Version "K35010g" and Progress "STANDBY"
9) Go to the bottom of the menu where it says "BIN File", click on the text and you will see a option to select a ".kdz" file.
10) Select the file that was in the download named "K350n10g_00_0504.kdz"
11) Once it is selected and you see the file name in the File Path menu Click "UPGRADE" above it.
12) Now click "Start" DO NOT UNPLUG YOUR DEVICE AT THIS TIME.
13) Wait for the process to complete, It may take several minutes.
14) Once all is done your device is now ready to be used again. You have completed the unbrick.
PS: Do not unplug until your device boots to Setup or Lock Screen or Home Screen.

[ROM][JB4.2.1][A3000-H][CN][3G] A3000_A421_000_029_130327_CN_3G

Hi, this is stoch China ROM for IdeaTab A3000-H. It has only Chinesse and English languages. And it has A3000_prc_3gfull partition table, requied to flash many ROMs It deletes data (because of flash).
Ok, here is a link to firmware: https://www.mediafire.com/file/6g138sppofvioe5/A3000_A421_000_029_130327_CN_3G.zip/file
Link for drivers for MT65xx Preloader: https://www.mediafire.com/file/r8y5olumc16iye2/Drivers_v1.2_A3.zip/file
Link for SP Flash Tool: https://www.mediafire.com/file/dtl5mlckqxofpul/SP_Flash_Tool_v3.1336.0.198.zip/file
Spoiler: Instructions to flash this ROM
1. First of all, download ROM, drivers and SP Flash Tool.
2. Unpack drivers, ROM and Flash Tool
3. Run SP Flash Tool, press Scatter-loading, select MT6589_Android_scatter_emmc.txt from unpacked folder with ROM
4. Press Download.
5. Turn off tablet, connect it to PC with USB
6. Press Ctrl + R and type devmgmt.msc, click enter.
7. Find "MT65XX Preloader", click on update driver
8. Select "Manual update"
9. Browse the files, select "amd64" folder from "Drivers 1.2".
10. OK, if finished, unplug USB from PC.
11. Connect tablet again
12. If there is any error in SP Flash Tool, click "Stop" and "Firmware Upgrade"
13. Wait for green ring and voila!
If you like it, press Thanks
I hope you like it

How can I just replage logo.bin

mickchip said:
How can I just replage logo.bin
Click to expand...
Click to collapse
Uncheck all images (USRDATA, ANDROID, CACHE), check only LOGO and click Download. Then connect your tablet (power off it before) and done

Done, thank you.

mickchip said:
Done, thank you.
Click to expand...
Click to collapse
Press Like button, if you can