Related
The Ultimate Beginner's Guide
NOTE: I am not responsible for any damage that happens to your phone!
NOTE: I am not responsible for any damage that happens to your phone!
NOTE: I am not responsible for any damage that happens to your phone!
NOTE: I am not responsible for any damage that happens to your phone!
Click to expand...
Click to collapse
Rooting your Phone
Q: What is Root?
A: Root is linux operator allowing access to all files in the file system. With root or administrative rights, developers can create or "cook" roms, get access to core files and of course create themes.
For a more detailed explanation go HERE
Q: Why Should I Root My Phone?
A: Here is a couple of reasons:
- A huge preformance boost
- Multi-Touch web browsing
- Install Apps directly to your SD Card
- Wireless and Wired Internet Tethering
- Faster Download Speeds
- Bonus Apps and Widgets from other builds
- Many many many more
Ok, since you kept reading, I think you are ready to root your phone! The only question now is HOW?!?
Check your Phone Version:
1. Go to settings
2. Press on "About Phone"
3. Scroll Down to "Firmware Version" if you have 1.5 please skip to the Rooting Your Phone part of this Guide. If you have 1.6 or higher please follow the downgrading part of the Guide.
-------------------------------------------------------------------------------------------------------------------------------
Downgrading your G1 to Cupcake 1.5
Load the DreaIMG.nbh File
1. Download the Original DreaIMG.nbh file:
Original DREAIMG.nbh
2. Extract the .zip file to get the DreamIMG.nbh file. Place the .nbh file in the root of your sd card. (root = not in any folders)
Note: Make sure your sd card is partition as FAT32 or your phone will not detect the .nbh files.
To Format:
- Load your SD card in the card reader and connect to PC.
- Make sure you back up everything on your card. a format will erase all data on the card.
- Now open “My Computer” and right click on the drive with the SD card (Warning! Make sure its the correct drive).
- Click on Format and select FAT32 on the file system drop down and click then click Start.
- Once completed, Copy your files back to the SD card and make sure the “Original DREAIMG.nbh” is at the topmost folder of your SD card.
3. Turn the phone off if it is on.
4. Turn on the phone by holding the Camera button and the End key until the bootloader screen turns on.
5. Hit the End key to start the update. DO NOT INTERUPT THIS PROCESS.
6. Once it is done, hit the trackball to restart the phone. You now are on the stock firmware RC29. You must do the next section to get back to cupcake.
Get Back to Cupcake
1. Download the cupcake update from HERE
2. Rename the .zip file to update.zip
Note: Make sure its update.zip not update.zip.zip. If you cannot update rename your file to update not update.zip
3. Turn off your phone
4. Hold the HOME key while pressing the POWER key
5. You will see a "!" which means you are in recovery
6. Open your keyboard and type alt+l to see text
7. Type alt+s to updpate
8. Congrats you have now downgraded your phone to the Cupcake 1.5 OS
-------------------------------------------------------------------------------------------------------------------------------
Rooting Your Phone
1. On your phone, Do the following,
- Go to Settings --> Applications
- Make sure Unknown source is checked ON.
THEN,
- Go to Settings --> SD Card and Phone Storage
- Click on Unmount SD Card
- Now Click Format SD Card (Make sure you backed up all your files!)
- It should remount the SD Card for you
2. Go to the Android Market on your phone and Download & Install "Linda File Manager" or "Astro File Manager" if you dont already have a file manager installed.
3. Plug the phone into the compuer via USB, then pull down the notification bar and click on the SD card notification. Then click mount.
4. Download the Following:
FlashRec.apk
Amon Ra’s Recovery Image (12/13/09)
5. Put both files in the root of your sd card (root = not in any folders!)
7. Unplug the phone from the computer once completed
9. Open the file manager and goto SDCard and then find the FlashRec apk file and click it (If asked tell it to use Package Installer to open it. It should automatically install the apk)
10. Open the FlashRec program and click on Backup Recovery Image and wait for it to finish.
11. Once done, click on the empty text box in the FlashRec program and type:
/sdcard/recovery-RA-dream-v1.5.2.img
Then click on the Flash Custom RecoveryImage button and wait for it to finish.
12. Turn off the phone and turn it on into Recovery mode by holding down Home and Power to turn it on (keep holding until the recovery screen comes up has a bunch of text on a black background).
13. Congrats! You have rooted your phone! To keep your root, you MUST continue to the next part of this guide!
-------------------------------------------------------------------------------------------------------------------------------
Installing CyanogenMOD (Custom ROM)
1. While still in recovery scroll down and click on "USB-MS Toggle"
2. Connect your phone to your PC
3. Download the following:
- Latest CyanogenROM HERE (Download should be toward the bottom of the post)
- ADP 1.6 DRC83 Update - HERE
4. Put the .zip files you have now finished downloading in the ROOT of your SD Card (Root = not in any folder)
5. Once done, unplug your phone from your PC
6. Press HOME to disable USB-MS
7. Scroll down to "Flash ZIP from sdcard"
8. Select HTC_ADP_1.6_DRC83_rooted_base.zip and Press HOME to install
9. Once done DO NOT reboot! DO NOT!
10. Scroll down to "Flash ZIP from sdcard"
11. Select update-cm-X.X.X-signed.zip and Press HOME to install
12. Press HOME to install
13. Once Done, press on "Reboot System Now"
NOTE: Reboot will take up to 5-10 min
14. Congrats! You are now DONE!
-------------------------------------------------------------------------------------------------------------------------------
Flash the New RADIO and SPL
Q. Why do i NEED this?
A. This will give your phone more internal memory and is REQUIRED for MOST new roms! This is a requirement for ALL Hero ROMS
NOTE: Please read carefully before flashing! This could BRICK your phone!!!
1. Check if you have a PVT or DVT board
a. Power off your phone and enter bootloader (Camera + Power)
b. Check look at the top and see if it says PVT of DVT
2. If you have a DVT board YOU CANNOT CONTINUE BECUASE THIS WILL BRICK YOUR PHONE!
3. For all you luck PVT board people Download the following:
OTA Radio Update - HERE
Danger SPL - HERE
Latest CyanogenMOD - HERE
4. Rename ota-radio-2_22_19_26I.zip to Radio.zip. Rename spl-signed.zip to SPL.zip. Rename update-cm-4.0.1-signed.zip to ROM.zip
5. Place the 3 renamed files at the ROOT of your SD Card
6. Enter Recovery (Home + Power)
7. Scroll down and press on "Apply any zip from sd"
8. Press on Radio.zip
9. Let it install. Once done it will tell your to reboot to finish the update. Press on Reboot System now in the recovery menu.
10. It will reboot back to recovery. Once it does, Scroll down and press on "Apply any zip from sd"
11. Press on SPL.zip
12. Let it install. Once done it will tell your to reboot to finish the update. Press on Reboot System now in the recovery menu.
13. It will NOT reboot into recovery. Your phone will be stuck on the G1 screen. Once it gets there, reboot your phone by pressing Talk+Menu+Power and then hold the HOME button to enter back into recovery.
14. Scroll down and press on "Apply any zip from sd"
15. Press on ROM.zip and let it install.
16. Reboot your phone to finish.
-------------------------------------------------------------------------------------------------------------------------------
Partition your SD Card to have EXT3 and Swap
Q. What is partitioning?
A. This breaks up your sd card to 3 file systems. Allowing apps to be stored on your SD Card
Q. What is EXT2/3/4?
A. EXT is a filesystem that is only read by a linux OS such as Android. This allows apps to be stored on the SD Card
Q. What is SWAP?
A. Swap is a space on your SD Card that the phone will use as "fake" internal RAM allowing for a major speed increase
1. Backup all your files!
2. Power off your phone
3. Boot into recovery (Hold HOME while holding the POWER button)
4. Scroll down to Partition SD CARD in the recovery menu and press on it
5. Click on Partition SD
6. In the menu, it will ask for you to input two numbers. Swap, then EXT space.
Enter the following:
- SWAP: 96 MB
- EXT: 512 MB
- FAT32: Rest of SD Card
7. Once done go back to the Partition SDcard menu
8 Click on SD:ext2 to ext3
9. Press HOME to confirm
10. Once done, you need to install your current ROM to enable auto apps2sd and swap
11. Download your currently used rom
- Latest CyanogenMOD - HERE
12. Put the .zip file you have now finished downloading in the ROOT of your SD Card (Root = not in any folder)
13. Once done, unplug your phone from your PC
14. Press HOME to disable USB-MS
15. Scroll down to "Flash ZIP from sdcard"
16. Select update-cm-X.X.X-signed.zip and Press HOME to install
17. Press HOME to install
18. Once Done, press on "Reboot System Now"
19. Congrats! You are now done!
-------------------------------------------------------------------------------------------------------------------------------
Installing a Theme
1. Download your favorite theme
- XDA Theme Forum - HERE
NOTE: Make sure you know that the theme is ment for your currently install rom
2. Put the .zip file you have now finished downloading in the ROOT of your SD Card (Root = not in any folder)
3. Once done, unplug your phone from your PC
4. Press HOME to disable USB-MS
5. Scroll down to "Flash ZIP from sdcard"
6. Select "themeExampleX.zip" and Press HOME to install
7. Press HOME to install
8. Once Done, press on "Reboot System Now"
9. Enjoy your newly themed ROM
-------------------------------------------------------------------------------------------------------------------------------
Factory Reset Your Phone (Data + Cache WIPE)
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to WIPE and click it
4. Click on "Wipe data/factory reset"
5. Press HOME to continue
6. Reboot your phone once done
-------------------------------------------------------------------------------------------------------------------------------
Full SD Card WIPE (EXT, DATA, Dalvik-Cache)
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to WIPE and click it
4. Click on "Wipe data/factory reset"
5. Press HOME to continue
6. repeat steps 3, 4, and 5 for "WIPE Dalvik-Cache" and "WIPE SD:ext partition"
6. Reboot your phone once done
-------------------------------------------------------------------------------------------------------------------------------
Donate
Hey guys, if you think my Guides have helped you and in general are very helpful, please considering Donating!
Like My Guide(s)? Donate
-------------------------------------------------------------------------------------------------------------------------------
Backup/Restore your phone (Includes EXT Partition)
Backup:
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to "backup/restore" and click it
4. Click on "Nand + ext backup"
5. Press HOME to continue
6. This will take 5-10 min to finish
Restore:
1. Turn off your phone
2. Boot into recovery (Hold HOME while holding the POWER button)
3. Scroll Down to "backup/restore" and click it
4. Click on "Nand Restore"
5. Press HOME to continue
6. This will take 5-10 min to finish
-------------------------------------------------------------------------------------------------------------------------------
ADB and FASTBOOT
Q. What is ADB?
A. ADB is a source tool for developers and avid android modders such as yourself to access the commands prompt of your phone through your PC. This allows full access to your phone through your computer which makes moving, installing, removing, and replacing files on your phone MUCH faster
Q. What is fastboot?
A. Similar to ADB, this allows you in flash a while img to any partition in your phone, including recovery, system, and user-data.
To setup ADB and Fastboot, please follow my very detailed guide found HERE
-------------------------------------------------------------------------------------------------------------------------------
Difference between a Boot-Loop, Semi-Brick, and a full Brick
Boot-Loop
Q. What is a Boot-Loop?
A. A boot loop is when your phone is stuck on the "ANDROID" screen when u first boot your phone (after the G1 screen or the My Touch screen). This occurs when something you have flashed went bad or interfeared with something you already had installed.
Solution:
1. Turn off your phone
2. Enter Recovery (Hold HOME while holding the POWEr button)
3. Choose from the following:
- Install a rom you KNOW works. Such as the latest cyanogenROM or the rom you have been preivously using
or
- Make a full wipe of your SD Card an phone and flash your update again
Semi-Brick
Q. What is a Semi-Brick?
A. A Semi-Brick is when your phone wont boot at all. The only thing is, you still have access to the recovery and/or fastboot menu
Solution:
1. Turn off your phone
2. Enter Recovery (Hold HOME while holding the POWEr button)
3. Choose from the following:
- Install a rom you KNOW works. Such as the latest cyanogenROM or the rom you have been preivously using
or
- Make a full wipe of your SD Card an phone and flash your update again
Brick
Q. What is a Brick?
A. A Brick is when your phone wont boot at all. This time, you DO NOT have access to the recovery AND fastboot menu. Basically, your phone is a paper weight.
Solution:
You can try this fix here which requires a Donor G1 to work:
HERE
OR
Try to get a new phone.
-------------------------------------------------------------------------------------------------------------------------------
Donate
Hey guys, if you think my Guides have helped you and in general are very helpful, please considering Donating!
Like My Guide(s)? Donate
-------------------------------------------------------------------------------------------------------------------------------
Additions and Questions
- If you think I should add anything to this guide or have any feedback please post it here!
- You can always PM me with questions or even post them here. I would be very glad to help!
-------------------------------------------------------------------------------------------------------------------------------
Credits
- Cyanogen
- Amon_RA
- XDA Community
- Anyone else who i am forgeting
-------------------------------------------------------------------------------------------------------------------------------
saved for future additions
saved for another future posting that i might need
When trying to install the flash rec using linda file manager I don't get the prompt to install. It just tries to open the zip file and show nothing. If I use app installer it doesnt even detect the file. What now?
rpdiddy11 said:
When trying to install the flash rec using linda file manager I don't get the prompt to install. It just tries to open the zip file and show nothing. If I use app installer it doesnt even detect the file. What now?
Click to expand...
Click to collapse
......Android opens .apks, you would need androzip to extract a zip file. Linda will only open .apks to install..
Nicely done, as usual.
Would this guide be the same if I was using Super D as the rom?
hiddengopher said:
Would this guide be the same if I was using Super D as the rom?
Click to expand...
Click to collapse
ya u can use any rom that has root enabled.
rpdiddy11 said:
When trying to install the flash rec using linda file manager I don't get the prompt to install. It just tries to open the zip file and show nothing. If I use app installer it doesnt even detect the file. What now?
Click to expand...
Click to collapse
u need to unzip the file on your computer and only place the .apk files on ur sd card
edit: It doesnt even come in a .zip
Download it here
http://zenthought.org/system/files/asset/2/flashrec-1.1.3-20091107-2.apk
Place on SD and install through linda or any file manager.
Force close
Hey so I did the whole then and it worked mint thank you very much. But one hiccup every time I open something from the original Google install like contacts or market it force closes the app. Any idea on whats going on??
Help please!
why does my G1 get stuck on D" blue android logo? i can't load it. omfg guys please help. I'm in a state of panick here.
I just installed D' latest cm and D' drc83 thingy i just skipped D" upgrade to cupcake part. omg i'm really really panick right now
help please RASAP!
OMG
OMG I"M FINALLY ABLE TO LOAD but why can't i load my 3G settings? D' apn is set by default and all but why can't i use it?
please help me really please
snOwrOse said:
why does my G1 get stuck on D" blue android logo? i can't load it. omfg guys please help. I'm in a state of panick here.
I just installed D' latest cm and D' drc83 thingy i just skipped D" upgrade to cupcake part. omg i'm really really panick right now
help please RASAP!
Click to expand...
Click to collapse
No need to panic. As long as you can access the Blue Android Logo, you are fine.
Please list, step by step, what you did (including ROM Version Numbers).
Also - you might want to try flashing/wiping your phone. That seems to take care of many issues, but I'd still like to see what you did.
elitemonkie said:
Hey so I did the whole then and it worked mint thank you very much. But one hiccup every time I open something from the original Google install like contacts or market it force closes the app. Any idea on whats going on??
Click to expand...
Click to collapse
Best guess would to be to wipe and try again.
a little help!
guys why can't i download apps from market place after following this guide? It keep saying forces close i just can't download any apps at all however i can browse them.
Anywhere to find apk. file apps or any solution please?
Some help here guys!
Thanks! appreciated!
Well I fixed it but I installed Dwangs OS and works mint.
because my Phone had PVT i updated everything... and then i would reboot at the end after installing the ROM and it will not boot... it gets stuck at the T-Mobile G1 Logo... is there anyway to fix this?
Cheers...
ElChibo said:
because my Phone had PVT i updated everything... and then i would reboot at the end after installing the ROM and it will not boot... it gets stuck at the T-Mobile G1 Logo... is there anyway to fix this?
Cheers...
Click to expand...
Click to collapse
Depends, can you get into recovery or bootloader?
JAguirre1231 said:
Depends, can you get into recovery or bootloader?
Click to expand...
Click to collapse
i can get into recovery mode.. i have been trying to reflash.. but no matter what.. i get stuck on The G1 screen...
Hi all,
I've got a Samsung Galaxy S I9000, but I don't have the stock Live Wallpapers.
Now I wanna install/do this:
"First place SamsungLWP.zip on the root of your SDcard (plug your phone into your computer and transfer the samsungLWP.zip to your phone's sdcard)
1. Go into rom manager and reboot into recovery
2. scroll down to install zip from sd card and press the power button
3. scroll down choose zip from SD card again hit power button
4. highlight signed SamsungLWPs.zip
5. Hit power button
6. Go back until you get to the reboot option I think back twice Reboot phone
7. go to personalize in setting options select htc wallpapers select live wallpapers and pick one to enjoy one"
I can't do the 2nd step, because there is no choice to select 'install zip from sd card'.
Can anybody help me?
I've got the stock rom (Froyo) and the phone is rooted.
Help would be appreciated
Koen
nobody?, I really need this now
did you fetch cwm?
The instructions assume you have CWM recovery (or a similar tool) on your phone.
In order to install programs in this manner you have to get CWM recovery. (search for rom manager in market and flash cwm (it's the first option from the top),
then again, I'm assuming you're getting this since you're still on 3e (the recovery most galaxy s phones come with). What I'd like you to do is get your phone into recovery mode and tell me what the very first line on the top says.
Hi,
The first line says: 'Android system recovery <3e>'
theres your problem you need recovery 2e
search for CWM in either update.zip or Flashable Odin version like cf-root.
if you get the update.zip version you need to put it on the root of your internal sd card, boot into recovery and select apply:update.zip you will need to do this twice... then CWM will appear and let you flash unsigned zip files.
if you use odin version just flash it in download mode and when you next boot you will have 2e recovery.
I just fixed it, I did put the 'data/app' folder onto my phone, and installed it, and it worked.
Thx everyone
There's your problem
You currently do not have the option to install (most) zip files from recovery. If you do want this option it is very possible and not too complicated(although this might void warranty) please read the forum guide on how to get CWM (clockworkmod)
I'm having a similar problem, but azzledazzle's suggestion left me a little baffled. I've got rom manager installed, Clockworkmod flashed and all that good stuff, but I'm still not able to install new roms. Now, I'm just about to try recovery mode, and...
Yes, 3e.
But how do I find a 2e thingie? Imagine I'm a gigantic moron who can put things in folders, but that's about it. I apologise for the pathetic help request, but if there's anyone...
Any help guys?thanks
Also having problems installing from sd
* edit*
Nvm
Listen..I have a HTC One V and when I go in recovery mode it says E:Can't open...Then when i press Vol Up + Power Button a list of commands pops up but there is nothing saying install zip from SD card..And now it's stuck at the htc one screen i can't start it up \_/
can it work for i9300 ?
koenster said:
Hi all,
I've got a Samsung Galaxy S I9000, but I don't have the stock Live Wallpapers.
Now I wanna install/do this:
"First place SamsungLWP.zip on the root of your SDcard (plug your phone into your computer and transfer the samsungLWP.zip to your phone's sdcard)
1. Go into rom manager and reboot into recovery
2. scroll down to install zip from sd card and press the power button
3. scroll down choose zip from SD card again hit power button
4. highlight signed SamsungLWPs.zip
5. Hit power button
6. Go back until you get to the reboot option I think back twice Reboot phone
7. go to personalize in setting options select htc wallpapers select live wallpapers and pick one to enjoy one"
I can't do the 2nd step, because there is no choice to select 'install zip from sd card'.
Can anybody help me?
I've got the stock rom (Froyo) and the phone is rooted.
Help would be appreciated
Koen
Click to expand...
Click to collapse
pls can you send the file to me [email protected]
Obviously you need to flash the latest custom recovery CWM. After that flashing zip will work.
Sent from my GT-I9001 using xda premium
This is my bro's old phone, and he said it's rooted and it has CWM installed.
1. I wanted to install a new rom so I put the zip file in an SD card.
2. There's a Recovery mode option when you want to restart the phone
3. I wiped the cache and data/partition.
4. I tried searching for the zip file, but I couldn't find it.
5. So I turned off the phone and relocated the zip file to the root of the sd drive.
Now! I'm trying to load into recovery, but I can't.
Is it bricked????
I plugged it on the pc and it made a sound that detected the device.
Btw, I'm a total amateur at programming/rooting, so all the help in the simplest form would be very appreciated.
Please help, the phone is still good and I don't want it to go to waste. I wanna start using it! Any help is appreciated (including reference links to other posts/threads)
to come into recovery mode, pull your battery out and then in again. then hold volume up, home button and power on all together....hold them all 3 till Samsung S logo is gone or till Kernel logo appears, the you can led the power button free but hold the other 2 till you will be in recovery mode again.
In CWM do not search or tick for the update zip. Go over: install zip from internal sd card and then phone should show you the files which are included there. Hopefully device will show you the rom.zip you want to flash there too.
If not, then i recommend to search here in the forum, and take you some to read and inform you about next steps....here are some links for first and further informations:
Firmwares and how to install via Odin:
http://forum.xda-developers.com/showthread.php?t=1102881&highlight=odin
[A.I.O Rescue & Recovery] My Android Collection:
http://forum.xda-developers.com/showthread.php?t=1796807
hello I have a Samsung Galaxy GT-I9000 Orange firmware version 2.2.1 and kernel version 2.6.32.9 root @ DELL104 version number # 1 FROYO.BVJS4 I want it to version 2.3.6 and after version 10 cynogenMod .
the question that I must étépe by step.
thank you for your assistance.
Excuse my English I used google translate
Morning,
So. Breaking this up into three stages.
Installing 2.3.6
1.) From Sammobile.com, download a 2.3.6 firmware of any region. Many people use XXJW4 (UK). Also download Odin unless you already have it.
2.) Place this firmware somewhere in your computer. Start up Odin.
3.) Turn your phone off. Once it has shut down, hold down the Volume Down, Home and Power buttons. You should see a "Downloading!" with a yellow android. This is download mode.
4.) Connect the phone to the computer using a USB. On Odin, one of the boxes should turn yellow saying "ID:COM".
5.) Click on PDA, then find the firmware you downloaded. DO NOT TOUCH ANY OTHER BUTTONS.
6.) Wait for it to start flashing.
Once you have 2.3.6, you need to root it...
1.) From the I9000 development forums there is a thread called "CF-Root". Search until you find the file with a JW4 in the name. (Will post links later)
Or you can just google "How to root 2.3.6 XXJW4" and it will take you there.
2.) Oece you have downloaded the zip file, unzip it. You should find a .tar file inside.
3.) Start up Odin and get into download mode. Connect the phone by USB.
4.) Just like before, click on PDA, find the CF-Root .tar, click on it. Again, DO NOT TOUCH ANYTHING ELSE.
5.) Wait for it to flash in. Your phone is now rooted
After that comes installing CyanogenMod...
1.) Backup whatever data you want (SMS, contacts, etc)
2.) From these development forums download BOTH CM9 and CM10. Also download JB gapps (Google Apps, links will be posted later). There is a good reason for this. Put all of these files on your phone, in your internal storage (not a microsd).
3.) This time, turn the phone off and hold down Volume Up, Home and Power buttons. You'll see your recovery mode.
4.) Using the volume buttons to move up and down, scroll down until you see "Wipe data". Select yes. This will erase everything! Do the same for "Wipe Cache" and "Wipe Dalvik Cache" under "Advanced Settings".
5.) Once they have all finished, select "Install zip from sdcard". Scroll until you see the CM9 zip. Install this first.
6.) It might start installing but then stop halfway, and then your phone will bootloop. DON'T PANIC. Your phone hasn't been bricked Just take the battery out, put it back in and boot into recovery mode lke before again. You'll see recovery has changed.
7.) Go to 'install zip from sdcard' again. Find the CM9 zip and install that AGAIN. Select Yes. Wait for it to finish.
8.) Once it has finished, let it boot for the first time. Once it gets to the homescreen, turn the phone off.
9.) Put it back in recovery... Again. Go 'install zip from sdcard'. Scroll down and this time install the CM10 zip. Select Yes and wait for it to finish.
10.) Once it has finished, select 'install zip from sdcard' again and this time find your JB Gapps zip. Wait for that to flash in.
Done! you've upgraded to 2.3.6, rooted and installed CM10.
Sent from my GT-I9000
Hello!
This thread is to teach you how to flash TWRP, along with a custom ROM on your T-Mobile Galaxy S5 WITHOUT root!
DISCLAIMER:
Read the whole thread at least one before trying!
Anything you do to your device is your own decision. I am not forcing you to do this. If you screw something up during the process, that isn't my fault.
Custom ROMs can sometimes be unstable. PLEASE make sure you are downloading the correct file for your device model.
Tampering with your device's firmware, including custom recoveries, ROMs, or rooting your device WILL VOID THE WARRANTY.
Flashing a custom ROM WILL DELETE YOUR DATA. Consider backing up your apps, photos, videos, files, etc. online or to an external storage.
Before we start, we need to download a few things.
*Do not download anything with Safari! Safari unzips zip files, but we want them to stay zipped. DO NOT RE-ZIP THE FILE YOURSELF!!! It will not be zipped in the correct format!*
1. Odin v3.12.3: (Odin)
2. The TWRP recovery tar file: (TWRP)
3. Your custom ROM zip file. (There are many ROMs out there, but Lineage is a pretty good one: (Lineage OS klte) Choose the most recent release.) IMPORTANT: Make sure you download this to your phone's internal/external storage to an easily accessible location.
4. A GApps package. This is required if you want to be able to download apps from the Google Play Store. Go to the Open GApps page and choose ARM, and Android 7.1. You shouldn't need anything more that micro. IMPORTANT: This file also goes onto your phone's internal/external storage.
5. Your device drivers. Most of the time, Windows will automatically install the required drivers once you put in the device, but in the case this doesn't happen, try googling your devices model number and "windows drivers." Follow the process to install.
Alright, with that out of the way, let's install TWRP.
1. With your phone unplugged, boot into "Download mode." Power off your device. Then hold down the Power, Home, and Vol- buttons until you see a warning pop up.
2. Accept the warning by clicking Vol+.
3. Run the Odin exe file we downloaded earlier. (You may have to unzip the file first.)
4. Go to Options and disable auto reboot. Go back to the Log tab.
5. Plug your device into the computer. You should see Odin say "ADDED!" on the side.
6. Click "AP" and locate the TWRP recovery tar file we downloaded earlier.
7. Once you select the file, click "Start."
8. When finished, it should say "PASS" at the top. This is where you unplug your phone and remove the battery.
9. Wait 10 seconds before putting the battery back in.
10. Try booting into recovery by holding down the Power, Home, and Vol+ buttons. If it reads "Team Win Recovery Project" at the top, then congrats! You've successfully flashed TWRP! If it says at the top "stock recovery," try the whole process again from step #1.
Now we can flash your custom ROM!
1. This is where we wipe your phone's data. Click on "Wipe." Then Swipe to factory reset.
2. After you have wiped your device, click on "Install"
3. Now navigate to the ROM zip file and select it.
4. Click on "Add more zips"
5. Navigate to the GApps zip file and select it.
6. Swipe to install. This can take some time, so grab a cup of coffee and maybe check out my Youtube channel?
7. The moment of truth: click on Reboot, then System. The first boot can take a minute. If it doesn't show up after 5 minutes, remove the battery and try wiping and flashing again.
CONGRATULATIONS!! You've installed a custom ROM! Enjoy! :laugh:
EXTRA:
If you want to enable root on your Lineage OS device, you must flash an additional file first.
1. Go to this link and download the first su (arm) file and save it to an easily accessible location.
2. Boot into recovery mode once again by powering off your device, then pressing and holding Power, Home, and Vol+ until TWRP appears.
3. Click on install.
4. Select the su zip file we downloaded earlier.
5. Swipe to install.
6. Once it is installed, boot back into system.
7. Navigate to developer options in settings.
8. Scroll down to"Root Access" and change it to either Apps, or Apps and ADB.
Awesome, now you have root!
Thanks for the help:
[url]https://forum.xda-developers.com/tmobile-galaxy-s5/general/root-how-to-root-sm-g900t-firmware-t3358190[/URL]
I did not work for me, when I go recovery mode it shows:
Could not do normal boot
Odin mode.
I'm definitely not an pro at this, so can anyone help me please
Worked perfectly on the latest stock OTA!
Doesn't work for me. When I reboot in recovery ode, instead of TWRP loading I get a generic Android Recovery screen with a few options - reboot system now, reboot to bootloaded, apply update from ADB apply update from SD card, wipe data/factory reset, wipe cache partition, mount /system, view recovery logs, power off. Now sure how to proceed....
bradmccoy said:
Doesn't work for me. When I reboot in recovery ode, instead of TWRP loading I get a generic Android Recovery screen with a few options - reboot system now, reboot to bootloaded, apply update from ADB apply update from SD card, wipe data/factory reset, wipe cache partition, mount /system, view recovery logs, power off. Now sure how to proceed....
Click to expand...
Click to collapse
We’re you sure to unplug and remove the battery? This is essential to ensure the phone powers down. If you just power down the phone will reset the recovery to avoid TWRP. You have to remove any power source to force a shutdown before it can reset. Please feel free to respond and I’ll be happy to help to the best of my abilities!
Thank you so much for this tutorial. It worked perfectly in my SM-G900MD, and it's easier than the method suggested by the Lineage OS page itself. :good:
Thanks, these steps worked just fine on an SM-G900T, and were very easy to follow.
Thank you! This worked beautifully.
Only thing that didn't work the first time is, is that it told me to download the Gapps Android 8.1 file instead of 7.1.
I hear people talking of unlocking the bootloader in order to install a custom ROM. Why haven't you mentioned that in this article?
Had the "FAIL! (Auth)" problem with flashing TWRP with Odin.
It seems that after I have disabled Reactivation Lock (the standard feature that requires activation of the phone with Samsung account) it helped to succeed flashing TWRP.
Hi All,
Thanks for a great and useful guide. Whilst it says this can be achieved without root, which is fantastic... It doesn't mention anything about tripping Knox or not?? I assume this will trip the Knox counter, won't it ?? Or do this method bypass that ??
Thanks, Lister
adult supervision needed for Samsung S5 Lineage 17 install
Hi, I'm good with adb and fastboot, running Linux with the commandline Odin4. I can get the phone to the warning screen about the danger of installing other Roms. How do I proceed? What are the commandline options to use to flash the LineageOS 17 with odin4 ? The Odin4 help file isn't very helpful.
Could not do normal boot
I am not an expert at this and I am having the same issue as The Verg
I have a message at the top "Could not do normal boot" same as him
I've been at this for 2 days now I'm just about at my ends wit
My phone is a Samsung S5 Active model SM-G870W
and I can easily rooted it or reinstall the stock file and put it back to original
and I've done that hump time but this TWRP file I just can't install it
to update this phone to a more recent software and basically install
an S8 or S9 software in it (mind you version 9 Pie would be OK0
and make this old phone a real beast.
I read somewhere about the OEM button which does not exist on this phone
whatever explanation they are giving to unlock it and make the button appear
all of a sudden is bs in my book.
Now please help me with this phone and the other guy by the same token
Is there another way I can get into this phone and wipe it clean and
boot it with thru the abd file or access the sd card or the internal
storage of the phone.
How can I add a picture of my phone to this thread