GPSdash and XDA - MDA, XDA, 1010 Accessories

Can't seem to get GPSDash to work with my XDA. Have Destinator 2 installed and it runs perfectly, but no joy with GPSDash. Tried most Comx Kbps combinations. Switched off IR. I am not running destinator when trying to run GPSdash so no clashes there. However, I can see some gibberish in the "data" screen of GPSDash.
Any suggestions?
Thanks !

Sorry...my GPS mouse is the LeadTek 9531 which comes as the default reciever with the destinator 2. Though this may help.
Thanks !!

Settings: Com 1..........nmea 4800.........

Tried that 1st thing. Didn't work :-(

If you see "gibberish" in the data screen it means you are receiving data. It may be a setting in gpsdash that needs adjusting.

Related

Touch Dual with Holux GPSSlim240 wont work!

I recently bought a GPSSlim 240 device (from Holux). I actually bough two, where one was for my friend.
However, as opposed to my friend, it wont work properly for me. Ive set Holux GPSSlim240 to use COM0, and ive set the GPS-programport as COM1.
However, when using Google Maps, it just says its searching for sattelites, and cant find any. After restarting Google Maps a number of times, and just by trial and error, it some times work! I doubt it has anything to do with reception, as ive been outside under clear skies.
When using TomTom, it wont work at all untill i get a connection with Google Maps.
Is there any settings, or something that may be wrong here? It works great with my friend's HTC S710, but with mine it doesnt! (ive even tried a hard reset!)
Cheers!
Untouchab1e said:
I recently bought a GPSSlim 240 device (from Holux). I actually bough two, where one was for my friend.
However, as opposed to my friend, it wont work properly for me. Ive set Holux GPSSlim240 to use COM0, and ive set the GPS-programport as COM1.
However, when using Google Maps, it just says its searching for sattelites, and cant find any. After restarting Google Maps a number of times, and just by trial and error, it some times work! I doubt it has anything to do with reception, as ive been outside under clear skies.
When using TomTom, it wont work at all untill i get a connection with Google Maps.
Is there any settings, or something that may be wrong here? It works great with my friend's HTC S710, but with mine it doesnt! (ive even tried a hard reset!)
Cheers!
Click to expand...
Click to collapse
Standard settings for TomTom are normally Com5 and Com8.....
Dirk
Im also using a Holux GPSSlim240, and i've never got it to work using the automatic GPS settings.
I've unticked the box labelled 'Manage GPS Automatically (recommended)', then in the bluetooth com ports, set it to a spare port (com4 on my hermes), and then just set your software to look at that com port.
Never had any problems connecting like this.
you have to uncheck secure connection when you register the bluetooth device and don't use external antenna application for tomtom it works

GPS Issues LiveSearch OK TomTom Not on Tilt

My device was working find with regards to GPS usage. I had to do a hard reset for some other issues. Now I can't get the GPS to work with TomTom or any other program where you specify the Com port.
Programs that work:
Live Search - Setting Windows Managed GPS Intermediate Driver
RunGps - Setting Windows Managed if you ask the program to find the port it will not find one. (Great Program)
Programs that don't work:
TomTom - Can't find the GPS whether I choose Internal or Other NMEA
GPS Test - Never finds the GPS
Any suggestions? Not really in the mood to do another hard reset but if folks think that will help I will try it. I have searched the forums and haven't found any specific answers to this.
This is an AT&T Tilt with the stock rom latest version from AT&T. No other modifications. I am not afraid to try editing the registry if need be.
Thanks,
Chris
bump.
Anyone?
did you install any gps software, i installed some crappy google maps knockoff and it borked my gps to where no program would connect had to hard reset my phone to get it to work again.
pdtp said:
did you install any gps software, i installed some crappy google maps knockoff and it borked my gps to where no program would connect had to hard reset my phone to get it to work again.
Click to expand...
Click to collapse
Nope. I have Live Search and RunGPS. Neither program has ever interfered with TomTom. Seems like something has gone wrong with the com port that the internal gps uses.
After a hard reset your first lock will take a little longer. How long have you left tomtom running to be able to get a lock? It might say no gps device for a goot 10 min before it locks on.
Also when you start up tomtom is the orange light blinking?
fone_fanatic said:
After a hard reset your first lock will take a little longer. How long have you left tomtom running to be able to get a lock? It might say no gps device for a goot 10 min before it locks on.
Also when you start up tomtom is the orange light blinking?
Click to expand...
Click to collapse
No lights. Running for 20 min and still can't find the device when set to internal gps. Thanks for the info though it was worth a try.
I have TomTom 6 and it is set to "Other BlueTooth GPS receiver" and Com4.
In Windows Mobile, Start, Settings, System tab, External GPS, Program port is Com4, GPS hardware port is (none), Baud 4800.
kierandill said:
I have TomTom 6 and it is set to "Other BlueTooth GPS receiver" and Com4.
In Windows Mobile, Start, Settings, System tab, External GPS, Program port is Com4, GPS hardware port is (none), Baud 4800.
Click to expand...
Click to collapse
That didn't work either. I am going to do another hard reset this weekend and see what happens. I will install TomTom before anything else.
Thanks for all the suggestions. I gave up and did a hard reset. First thing I installed was TomTom. It now appears to work as previously. Not sure what took out the com port but now all is well.
live searh????
hi i upgraded my phones operating sistem or i shal say someone else did it for me other wise i would be able to figure this out my self. i cant get livesearch to run in the new windows mobile 6.1 why???? any one? any one????

My diamond GPS does not work

Hello,
I am trying since yesterday to make my GPS working, with no success. Everytime, I got the following message:
Cannot find port com. I do not know what the problem might be. I tried all Ports (from COM 0 to COM 12, and all Baud rates). Tried 3 differents GPS applications. Memory Map tells me for Port 0 GPS communication timeout...
In addition, I tried to play with the External GPS. I tried with Manage GPS automatically on and off. Still the same..
I begin to think my GPS unit is defective...
Any ideas would be appreciate.
Thanks very much in advance,
Philippe
did you change settings in the gps control panel?
the default settings can be left alone. COM4. Baud rate should be automatically handled and unless you enabled AGPS any baud rate will do, if you enabled AGPS then I think you have to use 2400 as your Baud.
I just noticed the GPS harddware port in setting, system External GPS is not saved when you click ente.
Exemple I choose COM4, and Baud rate: 4800. I click OK. When I reclick exernal GPS, Hardware, I have got ''none for GPS hardware port. I do not know if it might be one of the reason why the GPS does not work.
Note: I just flashed the new rom: 1.35.401.3 WWE. Might it be a bug in this ROM (just question?)
Philippe
I can cofirm TomTom working with COM4 and baud 57600. Signal pickup can be time hungry, tho. Sometimes I get a fix in 20 seconds, sometimes it takes as much as 10 minutes.
no problem using mapking...
Hello,
And thanks everybody for your help. I just updated to the new Elite 1 ROM, and now it works like a charm....Very good...
I do not know if there is many francophones on this forum, but there is a new french forum about the Diamond:
http://htc-touch-diamond.forumactif.info/index.htm
Not very busy yet, but....
Cheers,
Philippe
Same problem... The tomtom 6 don't detect my integrated gps... if i chose the wired and put ports like say before, it don't work too.. Any way for detect integrated gps?
Here are exactly my setting:
Setting system External GPS:
GPS program port: COM 4
GPS hardware port: None
Baud rate: 4800
Manage GPS automatically is checked.
So open your GPS program, choose COM Port 4, and baud rate: 4800.
Should work. If not, flashthe new Elite ROM. It could help too.
Philippe
I can't flash the rom, it will make the warranty expire... And the mobile isn't mine, it's destined to be selled, i work on a gsm shop...
got exactly opposite problem - when I leave these default settings in "External GPS" CPL, the Diamond will suck my batterry within several hours, as if the GPS was still ON. have found out that if I disable all settings in this CPL, it stops sucking power (but then I can't use the GPS, obviously) - any clues or solutions?
I HAD to enable Windows Mobile manages automatic in External GPS in 'settings'. Check if it is enabled.
Disabling it made GPS never work.
Strange?
Yes, unless I restored all settings to their original values (Virtual port - COM4, HW port - None, Managed access - checked), I was not able to use the GPS. But these were exactly the settings I was having the battery drain issue with... I miss the GPS LED indication vastly...
I am have this problerm too...
Solution : make hard reset.. no more!
And all will be ok ... about GPS.
i have same proplem
i have same proplem when i updat to the new rom 1.93
I have a similar Problem.
I Updates my ROM to the new branded one from O2-Germany and since then my GPS is not working anymore. in GPSMapware I get device.exe errors and TomTom7 keeps searching and searching and so on...
The old O2 ROM has no GPS problems and every software got a loc in about 10 - 20 seconds.
But the most intresting point is that my brother has a Diamond too and no GPS problems at all.
I think I will get a new one from O2 before flashing it and loose my warrenty
Telus CDMA Diamond
I've got problem too. First Diamond I had no problem with GPS, something happened with the phone I had to exchange, and new one (phone) GPS wouldn't pickup Sat. I'm on Telus CDMA. Maybe they removed physically on the second batch of Diamonds.
My GPS doesn't work too well either. I can usually get a fix eventually when outside with a clear view of the sky but in the car it is hopeless. I use TT7 and the GPS status screen shows that the Diamond can see maybe half a dozen satellites or so but with very low signal strength. The bars stay grey for ages and then eventually three or four will turn blue and all the time the battery is draining like crazy. I also have a Holux GPSlim 256 and with that I get a fix much faster and the signal strength is much higher. I can also use it in the car with no problem.
I have to say I'm pretty disappointed with the GPS performance of the Diamond and from the number of posts in this forum from people with similar problems I would suggest that there is a design flaw or very poor quality control. I had an XDA Orbit 2 for a while and that was far superior.
Me too
my diamond have the same problem too.
it was working with the old rom's and the early new
but later with new rom's it is locked, I don't know why or how to fix it.
then I back to the last good one but still locked.
it seem's working fine, because the software is detect the gps device and also detect it on port 4 and baud speed, but without signal any more.
I used Garmin, Destenator, iGo, fanaeen, and gps test.
and I try to use all avaliable solutions
I used all diamond rom's here and used all radio version's even the hardspl I changed it too with no succeed.
any advice would be help!
thanks in advanced
Hi,
I own two diamonds and I also found problems with the GPS in both of them. Probably mine is not the same you are describing. What I get is the following:
Running TT7, the GPS works but TT7 map in the screen remains in grey color. Rarely it shows color for some seconds and l"oses signal" again. It navigates, but no messages on proximity of POIs work. Also, when driving, if TT7 is forced to recalculate (every time I do not follow the instructions), it forgets about the required destination. In the GPS configuration option within TT7 it does not show satellites, the bars are empty and the coordinates shown are grey... but showing values!
Finally, I found the reason. I use Bluefire VPN, a piece of software to connect securely to my company. The GPS and Bluefire cannot live together.
I have tried everything: TomTom 6, changing COM port (many combinations)for the GPS, A-GPS on and off... No way.
It worked perfectly in P3600. I tried many ROMS and pieces of software without problems but in the Diamond I haven't been able.
Perhaps the reason is some resident code of Bluefire. Don't know. In any case, if this is a case similar to any of you, my advice is the following:
Hard reset, install TT7 and maps and test the GPS. If it works, start installing software until it crashes.
In my case, the GPS is always dead after the soft reset required after the installation of Bluefire, and it works again after another soft reset once Bluefire is uninstalled.
Hope it helps and hope somebody can also help me solve this issue.
SOLVED
Hi guys
Here is my solution.
First you have to flash 1.13.25.24 radio rom sometimes it can be solve the problem.If not you must open your phone with Htc service manual and find gps coaxial cable and check it.Sometimes it can be pulled out.Mine antenna was unconnected and gps couldnot find any satellites.Sorry for my bad english.

TD's GPS thread

Hi all,
Could you please, be kind and post you experience with TD's GPS...
Since I got my TD(4 days) I have not been able to test the GPS at all
I have loaded some soft that could help me here. ( I travel a lot between Korea and Japan). Cannot really use the phone here, but WIFI works great and I thought I would give the GPS a test run.....no luck YET..
TD's own: QuickGPS has downloaded(through WIFI) all the info and it is up to date......But how do I set up the GPS itself???
Phone did not come with preloaded GPS software so,I have loaded following soft on itnone of them would recognize the gps)
i.e. " no GPS found."
1.Google Navigator 3.4
2.GPSvp (http://gpsvp.com)
3.Effica GPS Utilities (http://www.efficasoft.com/gpsutilities/index_wm_ppc.html)
I would really like to test out the GPS here first.I am returning to EU (home) in october or november and I would like to use it there as well.
sorry for the bump
I tried the search...not just this forum but all of XDA.....I cannot seem to find one successful step-by step activation as of yet???
Nobody has internal GPS running on their TD??
Anyone?
Runs perfect and is good quality.
Make sure you let windows manage gps (in external GPS settings):
programport COM4
hardwareport none
and in last tap check the checkbox.
Programs find gps at Com4 at 19xxx baud.
THX RIEL
thank You for you reply.
Will try tommorow morning.
Riel said:
Runs perfect and is good quality.
Click to expand...
Click to collapse
Don't you have a problem with the static navigation? This behavior "drives"
me nearly crazy, because beside of that, the GPS in TD is superb...
On mine, no programs can access the GPS and the programs will lock and crash the phone when it tries to connect to GPS.
The onlt one that does not lock the phone is TomTom, but it wont connect to GPS.
I've tried combinations of the recommended port stttings, but I still get no GPS.
I have not activated A-GPS, so I don't know if the phone came with this already activated - how would I check this?
My GPS is a pain in the arse, From what i have read its because of the static navigation. So far it says i live in house number 20 when I live in house number 16 and when i'm on route I'm yet to hear a " You have arrived at your destination" because its accuracy is off about 50 metres.
Hopefully there will be a fix for this very soon.
can someone get me up to speed a bit? what is the 'static navigation' that i keep hearing about..
admittedly, i find sometimes the gps is slightly less accurate at placing my exact location compared to my old Trinity, but otherwise its worked great for me..
PaulusUK said:
On mine, no programs can access the GPS and the programs will lock and crash the phone when it tries to connect to GPS.
The onlt one that does not lock the phone is TomTom, but it wont connect to GPS.
I've tried combinations of the recommended port stttings, but I still get no GPS.
I have not activated A-GPS, so I don't know if the phone came with this already activated - how would I check this?
Click to expand...
Click to collapse
Hey, have you got installed TomTom 7? I'm running TT7 and when I select "internal GPS receiver" it connects perfect. I know this doesn't exist in TT6, but I can also get my GPS running in TT7 if I set it to use a BT receiver on COM4 at 57600 baud. (Assuming you didn't mess around with the standard GPS settings, like HTC meant them to be )
Google maps is using the selection of "use windows settings".
racerx_ said:
can someone get me up to speed a bit? what is the 'static navigation' that i keep hearing about..
admittedly, i find sometimes the gps is slightly less accurate at placing my exact location compared to my old Trinity, but otherwise its worked great for me..
Click to expand...
Click to collapse
Check this thread out.
http://forum.xda-developers.com/showthread.php?t=402039&highlight=static+navigation
and this.
http://forum.xda-developers.com/showthread.php?t=401833&highlight=static+navigation
hi guys
Same problem here. AGPS is disabled. I have tried Garmin,TomTom, iGo and google. 95% of the time it can not lock onto the sats. Once in a while it will work fine. Last night it picked up the sats in my bedroom on the second story and this morning outside in clear sky it found 4 sats but with very low signal and could not give me my cordinates, gave up after 15 min.
I have tried GPS tools and even that won't lock onto the sats. Data is upto date with quick gps.
So is it the hardware problem or has it to do something with radio? It can't be faulty TD because there are a lots of people with the same problem, and why lots of other users have no problems accessing the sats?
How is your gps working?
hi
great going sofar...thanks to all. We still have no real answers.
Let's keep this one going.
Looks like GPS is an issue with TD.
( Other than GPS...I am loving this sweet phone )
Now I am trying different roms to see if it is related to that. Will let you guys know if find anything.
Strange, on all ROMS my GPS reciever just works perfect.
Almost the best piece of hardware on the device
As I mentioned in Another topic, I use the GPS for TrackMe, at the same time I am navigation via Igo, and at the same time I showoff Google Maps with GPS support.
It functions very well!
Did you get the GPS-Fix downloads? It speeds up a lot.
Yes got the gps fix downloads but still no go. Still have not lost the hope. I hope its not some hardware problem.
I was fed up messing with mine, so I did a hard reset, and its sorted ...... for now!
same as Paulus
I did a hard reset....and it works perfect. No other adjustments done.
Tried the TomTom, Tracky Pro, GPS VP, and the HTC GPS Tool....all work no problem...outside I get a fix within a minute sometimes seconds.
I think one of the quirks that the TD's GPS has is that, when it's in Acquiring Satellites mode it doesn't seem to spit out any sort of status. The first time I noticed that I thought my internal GPS wasn't working, since with my external Holux unit I can see the satellites which the Holux was trying to lock onto.
Whereas with the TD's built in GPS it just snaps from nothing to.. acquired. So it's hard to see wheter it hasn't gotten a signal because it's in a poor area of reception or not. Usually I'll just try and stay still till I can get a lock.

GPS Waiting for signal... stuck forever.. whats wrong?

I installed iGO8 and now all my GPS, Garmin, Google maps dont work..
It just gets stuck at waiting for GPS signal...
What's wrong? It was a clear blue sky out door when I checked this too..
Mmm sounds familiar. I upgraded my X1 firmware to the stock R3A rom (last weekend) and had this trouble with iGO8.3 (or TechrificWay which is the local Australian version) after re-installing all my apps. Had the same problems with Google Maps. Thought the GPS was crook. I was just about to do a hard reset and re-install but decided to try my old Copilot Live 7 software and everything worked fine. So un-installed iGO8.3 and re-installed and everything worked fine. If I think about it I might have un-installed iGO8 before I installed CPL7, not sure. Anyway everything has worked fine since.
Perhaps worth a try?
Same problem here on my fuze.
I had to wait many mins nearly 30mins to get the signal and if lil miss, again 30mins.
I'm using garmin and not sure about others. I tried many radio versions but still same.
BTW; sorry for posting in wrong device section but I found a nice thread here which could help.
Best Regards
I actually have 2 GPS on my sd card atm, could this be the problem?
I don't think so, unless both aren't running in background.
Checkout in FdcSoft Taskmgr if there are.....
Best Regards
Im gonna try uninstall everything, delete darmin off of sd card, and renstall igo. will post back
ok, so i uninstalled everything and was only left with google maps. no igo or garmin. so i tried too use google maps with gps, and even google maps coudnt even work. it said it cant find the gps receiver.. how can i turn it back on? could it be my reg setting, i make gprs disconnect after 2 mins?
Ive tried using manual com using baud rate 4800 and all kinds of combinations.
It would say "intializing GPS..." then it would come up with no GPS receiver found.. whats wrong??
Ive tried using manual com using baud rate 4800 and all kinds of combinations.
It would say "intializing GPS..." then it would come up with no GPS receiver found.. whats wrong??
I had a problem a few weeks ago when I couldn't get GPS to work (in Google Maps and CoPilot Live 8).
It turns out that my QuickGPS data has expired (somehow it got set to manual download). Updating the data and setting QuickGPS to update automatically made everything work normally.
In Advanced Config Tool, there is an option to turn on aGPS. I have mine set to "ON" even though I don't know if this has any effect on the X1.
Yep, Ive already turned on everything A-GPS, GPRS all settings on, tried google maps, everything again.. Nothing seems to work and it keeps coming up with No GPS receiver found although I checked if my GPS builtin is actually defective by running GPSGate2 and testing my builtin GPS. GPS said it reads ok.. so what is the problem.. its really annoying.. it ruined my anniversary 6month with my gf
^^^ You still didn't mention running QuickGPS...?
Yeah, done that too. Countless times...

Categories

Resources