Preventing cabs from self removing themselves - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hi all,
Nice simple fix for those who like installing cabs on the device.
Just set the file to Read Only on the PC before you copy it over onto the PDA
Now it wont delete itself, though you can still delete them if you want to.
Rich

This works on all post WM2002 but prev editions fail to install when set to read only. Thanks for the note however but I thought I would add this footnote for anyone with pre WM2002 s/w.

Resco Explorer can also set the attribute to read only for any cabs that you already have on your device, like those in Extended Rom! :lol:

you can also edit this reg key:
[\HKCR\cabfile\Shell\open\command]
Default = "wceload /delete 0 %1"
it will permanently prevent deletion of cabs after installing them...
buzz

Most easy
Use Cabinstaller
You also can direct where you want to install it to
http://www.geocities.com/s_k_s_k_s_kru/util.html#ci

M4io said:
in browsing my editor i stumbled upone these :
Code:
[\HKLM\SOFTWARE\Apps\Microsoft Application Installer]
fAskDest=0
fAskOptions=0
fEnablCef=0
nDynamicDelete=2
Supported="PALM PC"
* fAskDest=1 gives you a popup when you install a CAB so you can install on Storage Card for example
* fAskOptions=1 asked before overwriting, haven't found out if/what other options
*fEnableCef : I haven't messed around with that
* nDynamicDelete=0 and the CAB file remains, =1 it disappears but what the difference with the default value 2 is I couldn't figure out.
So if anyone else wants to experiment with it and post their findings
I searched Google but all I could find was about fAskDest
Click to expand...
Click to collapse

M4io said:
M4io said:
in browsing my editor i stumbled upone these :
Code:
[\HKLM\SOFTWARE\Apps\Microsoft Application Installer]
fAskDest=0
fAskOptions=0
fEnablCef=0
nDynamicDelete=2
Supported="PALM PC"
* fAskDest=1 gives you a popup when you install a CAB so you can install on Storage Card for example
* fAskOptions=1 asked before overwriting, haven't found out if/what other options
*fEnableCef : I haven't messed around with that
* nDynamicDelete=0 and the CAB file remains, =1 it disappears but what the difference with the default value 2 is I couldn't figure out.
So if anyone else wants to experiment with it and post their findings
I searched Google but all I could find was about fAskDest
Click to expand...
Click to collapse
Click to expand...
Click to collapse
thanks for the help really useful man.

Related

.cab queries

Hi,
I need some assistance. I am currently cooking my extended rom. My Extended rom does not have enough space so, i am putting some of my MUST HAVE softwares in my storage so that it installs after a HARD RESET.
But, most .cab files will auto delete upon launch. Is there any way to make
it not delete ? Kindly assist.
Thanx a million
You can avoid the CAB files being deleted by making them read-only.
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
bosjo said:
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
Click to expand...
Click to collapse
i have tried that but, dont work
All my "wanna hang on to" .cab's are write protected, and non of them get deleted upon installation.
Manuel installation that is.
bosjo said:
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
Click to expand...
Click to collapse
ermm.. how do i go about it... i wanna auto install stuff like Pocket Informant , SPB Pocket Plus and my must have s/w upon hard reset
Thats why i need to coookkk
I have room enoughf in my ExtRom, so I have never auto installed from other than the ExtRom.
But I'm almost 100% sure that there was a topic on auto installing from \Storage (Card) sometime ago.
Maybee youll find some info in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen
bosjo said:
I have room enoughf in my ExtRom, so I have never auto installed from other than the ExtRom.
But I'm almost 100% sure that there was a topic on auto installing from \Storage (Card) sometime ago.
Maybee youll find some info in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen
Click to expand...
Click to collapse
well, i dont seem to find anything of what i am looking for
Wait a day or two, maybe someone who knows come along.
You can use a software name Cabinst wich let you install a cab without deleting it.
Easy.
Hi,
Easiest way is to make cab read only. Browse the storage card using PC via activesync. Right click on cab file. Go to properties and make it readonly.
You can also change the deafult beahvior of Instal by changing registry key.
Shikra said:
Hi,
Easiest way is to make cab read only. Browse the storage card using PC via activesync. Right click on cab file. Go to properties and make it readonly.
You can also change the deafult beahvior of Instal by changing registry key.
Click to expand...
Click to collapse
change which part of it ?
http://forum.xda-developers.com/viewtopic.php?t=16377
M4io said:
in browsing my editor i stumbled upone these :
Code:
[\HKLM\SOFTWARE\Apps\Microsoft Application Installer]
fAskDest=0
fAskOptions=0
fEnablCef=0
nDynamicDelete=2
Supported="PALM PC"
* fAskDest=1 gives you a popup when you install a CAB so you can install on Storage Card for example
* fAskOptions=1 asked before overwriting, haven't found out if/what other options
*fEnableCef : I haven't messed around with that
* nDynamicDelete=0 and the CAB file remains, =1 it disappears but what the difference with the default value 2 is I couldn't figure out.
So if anyone else wants to experiment with it and post their findings
I searched Google but all I could find was about fAskDest
Click to expand...
Click to collapse
keep the ext rom empty,
after reboot hack the reg to point to new area.
Run the autorun from threre.
Have all files as read only.
info under
http://forum.xda-developers.com/viewtopic.php?p=83119#83119
Only problem is that all cabs are installed in the default location.
I have yet to get cabinstall to run in batch mode using the nscript tool.
Hope its what you are after

NEW ROM FOR s730er(20279)

Dear all:
I have made another 20279 rom for wings(s730). I found the S740'S office rom ( 1.14.707.0) from this link http://forum.xda-developers.com/showthread.php?t=441674.And it contain all chinese and english language,so i made our ROM over again.
What's new:
1,full new office 20279 sys
2,full oem from 1.33 707 1(office rom found by hikey)
3,cn&en language,cn default
4,New RADIO 1.60
5,system optimization(unlock,accelerating system-you can feel your phone as if it have wings because it is very fast )
Download from it:
http://www.rayfile.com/files/14ecb868-b3bc-11dd-9067-0014221b798a/
More informations view this link: http://www.ioicn.com.cn/forum/thread-304244-1-1.html
Sorry , I dont know how to insert a link and images.
Who will help me?
Mirror
Ive Created A Mirror For This Rom Due To The Difficulty Ive Just Had Downloading It.
Heres The Mirror Anyway...
http://www.mediafire.com/file/z0yzm3gyuon/RUU.rar
Hey xucue,
Both links doesn't seem to work here.
The downloadlink gives me a page with much chinese characters. I tried de red button but this doesn't work.
Would you post te correct links or maybe upload it to another server?
Thank you.
ps: wat is te free ram?
Oh sorry OllieD's,
Didn't see your your post.
Think this page was in my cache memory.
Downloaded, tried unsuccessfully, get stuck on 19% and then gives me 262 error, after that bricks the phone. To get the phone back, had to reflash with original htc firmware. Tried 2nd time with another way, no success stays at 0%, i mean without running sspl. Am i doing something wrong?
thanks for your link,dear dllied.
to update the rom,you have to make sure your wings' spl is 0.91.
i have test it,and it work well,so i share it to all.
available ram is same to office 6.0.
in my other rom,the available ram have 20 with sd card after flash rom.but it is only contain chinese language.
Yes i have spl 0.91, Had it since update with Alcaline's rom. But still same stuff.
rom is running! battery load over usb is disabled - go to settings an change it. every thing is ok!
i wonder why there is no rom with phonecanvas 2g for wings. also, why is the original s740 weather gone?
but: rom is cool and fast!
many thanks
ok tell me if i am doing something wrong in steps:
1. Unlock the device with sda-unlock
2. Backup-just in case.
3. Put spl-0.91-wings on the phone and run it, accepting everything, then when it says usb, unplug and replug usb cable
4. Run Rom updateutility.exe on pc
Then it goes up to 19% everytime and gives me 262 error. Triying recovery because phone boots to 3 colour mode, as there is no rom in it. Says recovery successful. The flashing again, stays at 0% then gives mee same 262 error.
Then the only way to get the phone back is to flash with original htc firmware. So what am i doing wrong?
may this helps: my ROMUpdateUtility wasn't right. take the nbh and put it in a folder with another one - from an another rom!
Is there any way to get the eT9.Wings.0414.kmap.txt included in this rom? I need the keymapping for norwegian language..!
Zeerocool said:
Is there any way to get the eT9.Wings.0414.kmap.txt included in this rom? I need the keymapping for norwegian language..!
Click to expand...
Click to collapse
I need it too...
NeoID said:
I need it too...
Click to expand...
Click to collapse
I found the answer! Just add the norwegian keymap in the windowsfolder!
SimonKnight6600 said:
I found a german keyboard layout file for the wings: http://pocketpc.ch/showpost.php?p=217070&postcount=7 It also adds support for keys like ä, ü and ö.
Just copy the file into the windows directory of your S730. Then open your favourite registry editor, go to HKEY_LOCAL_MACHINE/SOFTWARE/Tegic/eT9/IME/KeyboardLayoutDlls and change the value of 000007FF to eT9.Wings.0407.kmap.txt.
HTH
Click to expand...
Click to collapse
Zeerocool said:
I found the answer! Just add the norwegian keymap in the windowsfolder!
Click to expand...
Click to collapse
Thanks.. I've made a backup from my HTC... if you want it, here it is..
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\Keyboard LayouDlls]
Change the value of: "000007FF" to eT9.Wings.0414.kmap.txt
Click to expand...
Click to collapse
Is there anything special I have to do in order to be able to flash my S730 with this rom? I see that some people had problems with it..
@Zeerocool, do you like the rom? Recommended to upgrade from Alkaline's build?
Ok, i think i am unlucky. Done evrything that i possibly could think of. Tried putting .nbh file into different rom update folders - no success, tried changing updateromutility.exe from various roms, tried customruu - no success, tried renaming .nbh file into latin only letters - no success. Tried with 3 different Windows systems: XP, Vista and 7. 2 different pcs. This just doesnt work, gets stuck on 19% always, all other roms upgrade fine, but not this one. Please help.
nice one, quick and stable.
I remade SlidingPanel CPRs to support Calibri,
1) install Calibri mod by NRGZ first
2) copy CPRs to your \Windows folder (replace existing)
I also add BaseHue and ClearType apps I found lacking
Also, I made my own Home layout without Profiles (you can easily access via On/Off key) and with compressed size for speed
I add regedit for your convenience, here are the mods you might like:
* HKEY_CURRENT_USER\ControlPanel\SoundCategories\CallStart to 0
* HKLM\System\GDI\GLYPHCACHE\limit to 65535 (tweak)
* HKLM\System\Inbox\RecipientAutoComplete and set/change the following DWORD: MaxSuggestions=4 (for example)
oh, and you can run Security app to all off so that you can rearrange Windows folder without restrictions + batterymeter that is a line on display top + reboot option added to On/Off button menu
all in the ZIP attached
+ I give you a new desktop theme, just place scheme in Application data/home and pics in \Windows
Finally success.

Wm 6.1 roms

Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]
BEATTWEAKER said:
Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]
Click to expand...
Click to collapse
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?
All of your questions are answered inside
refuse2bstopped said:
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?
Click to expand...
Click to collapse
I have been using this rom for a couple of weeks now and I have just discovered once I reflashed it I have seemed to fix the only error that was found...
here is a posting that will give some info and hopefully answer alot of your current questions..
Default FAQ
FAQ Section:
Read everything in this section before downloading the roms and flashing.
If you don't understand it, read it again and again until you understand.
Once your done flashing your device double check back here again to configure your device.
I will not reply to any subjects already covered in this section.
I'm not trying to be rude, I'm just very busy with finishing up this project and also working on other projects.
Back up your phone before downloading and flashing this rom... I do not want anybody to loose their data due to flashing this rom, as the rom will erase all of your data...
How To Flash Rom
HERALD-USPL-beta3 - posted by tiksister - rapidshare
How-To Flash the HERALD-USPL-beta3:
Download and extract both files.
Place the extracted OTP v7.1.nbh into the Herald-uspl-beta3/RUU folder.
Move the entire Herald-uspl-beta3 folder to the root of the c:\.
Follow the simple readme file.
Break down of how to flash this rom:
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Instructions by Ivanmmj
===================================
If your device is already HARD-SPL read the following link before flashing.
HARD-SPL
======================
Disable Random Access and Enable Scrolling
With random access you must do the following to enable contact scrolling.
Click on the contacts button at the lower right hand side of the screen.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
Now I know the following will sound strange but it will enable scrolling in the contact menu.
Repeat the following steps again, and the random acess bar on the right handside will go away and scrolling will work again.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
If you want to enable random access, just go back and uncheck the "Show alphabetical index"
======================
How to turn off QuickMenu
/Start/QuickMenu/Exit
It will prompt you with "Exit QuickMenu?
Choose yes and it will not startup again even after a reboot.
Things to do after flashing your device:
Network Wizard
Go to \Start\Settings\Connections\Network Wizard
Choose your location and provider, do not reset the device when prompted.
Connections
Go to \Start\Settings\Connections\Connections
Once completed save and exit
Video on how to setup your device after flashing
MMS/SMS Setup
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: sendlimit3 which will be set to the default of 300k. u gotta change it to 1228800 and than the 1200k will appear.
note u can also change sendlimit 2, 1 to be the same as what ever u decide to change wap * sendlimt* to be. once u do this the 1200k will appear.
++++in between doing the above and below, u have to go to
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
=======================
Soft Keys
The calendar and contacts keys can be changed with the following steps.
/Settings/soft keys
Use this setting feature to change to what every programs you want.
========================
Show CIM contacts
By default it has been disabled so your CIM contacts will not display, use the following reg hacks to enable it.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSIM"=dword:00000001
=========================
Show clock instead of battery
If you want to show the clock instead of the battery or the other way around, use the following reg hack.
Clock
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:0
Change the current dword:0 to 1.
Battery
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:1
Change the current dword:1 to 0.
==========================
M2DC
Just tried the M2DC theme manager on 7.3 Std, with a renamed .zip file to .m2dct file (specifically the KnobiSkin from the M2D skin thread).
First time, it locked up. M2DC continued with spinning icon until I forced a reboot. Touchflo was off after reboot, and after enabling it everything appeared to be the same.
Second attempt, I disabled Touchflo from today before applying the new theme. Got the "Applying Theme" prompt. After M2DC closed, I reactivated touchflow and new theme was applied.
Simple instruction for use of M2DC Themes on OTP 7.3:
Find a skin you like, download the zip file (not the cab),
Rename file to .m2dct,
Copy new file to the themes directory of the M2DC install directory,
Disable touchflo in Today settings
Start M2DC,
Go to themes tab (the first time it will back up the default theme),
Click the new theme then apply,
Restart touchflo.
Alternate for creating themes from skin CABs:
Run M2DC first, let it make the DefaultThemeBackup.m2dct file, Close M2DC.
Run the CAB skin of choice.
Rename DefaultThemeBackup.m2dct to OriginalTheme.m2dct (or anything else with same extension).
Rerun M2DC. It will detect no DefaultThemeBackup.m2dct and will ask to back up again. Let it make new backup. Close M2DC.
Rename new file to the name of the new theme.
Repeat for each skin CAB you wish to convert to m2dc theme file.
Note: The M2DCT files can be large (over 3Mb, 660 files backed up). Best to do this only if M2DC is installed on a large Storage card.
Note 2: Several times M2DC appeared to freeze when applying or backing up themes. It looks like it has problems if touchflo is not off prior to running. It does try to deactivate touchFlo then reactivate when done, but it doesn't appear to work flawlessly yet. It is better to deactivate the Today plugin before running M2DC on this ROM build.
__________________
This mirror pretty much has all roms from version 7.0 - 7.7 which is the most current.
http://www.evolvers.net/Herald_Roms/
Here is one link that has some pretty useful items in it also:
http://forum.xda-developers.com/showthread.php?t=341867
thanks to all of the developers and cooks on XDA for without you guys none of this would be possible

help creating Cab from OEM Package

Hi I am trying to create CABs from OEM Package. The cabs i want to create are below.
This Touch HD is a Orange branded phone and the HTC Streaming Media is removed by Orange. I do not at this point want 2 do a Rom upgrade.
I have tried various Streaming Cabs form this forum. The streaming cabs that do work will only stream over GPRS and not wifi.
I tried duttys streaming cab but get error of file type not supported, which i presume is because the StreamingSrcFilter is not present.
1. PACKAGE_BlackStone_StreamingMedia_HTC_All
2. PACKAGE_BlackStone_StreamingMedia_HTC_All_0409
3. PACKAGE_BlackStone_StreamingSrcFilter
4. PACKAGE_BlackStone_StreamingSrcFilter_0409
I have looked about the forum and cannot seem to find infromation on
OEM Package > Cab there is infromation on Cab > Package.
I will pay to be pointed in the right direction
Kind regrads
There are tools for this, although I've never used them personally. I don't know how well they work, I do it manually with WinCE Cab Manager.
Normally I'm creating cab files manually using WinCE CAB Manager.
cost
vangrieg said:
There are tools for this, although I've never used them personally. I don't know how well they work, I do it manually with WinCE Cab Manager.
Click to expand...
Click to collapse
if i send the packages will u create cabs - just let me know how much the cost is
help creating cabs
makkad said:
Hi I am trying to create CABs from OEM Package. The cabs i want to create are below.
1. PACKAGE_BlackStone_StreamingMedia_HTC_All
2. PACKAGE_BlackStone_StreamingMedia_HTC_All_0409
3. PACKAGE_BlackStone_StreamingSrcFilter
4. PACKAGE_BlackStone_StreamingSrcFilter_0409
I have looked about the forum and cannot seem to find infromation on
OEM Package > Cab there is infromation on Cab > Package.
I will pay to be pointed in the right direction
Kind regrads
Click to expand...
Click to collapse
Have a look and let me know the cost for creating the cabs.
Here you go ...
If you want to, you can spend me some beer .
bbc iplayer orange branded HTC touch HD getting there
johnpatcher said:
Here you go ...
If you want to, you can spend me some beer .
Click to expand...
Click to collapse
thanks John, it works, over 3G but wifi seems to be a problem will have a play around but in the meantime enjoy the beer. paypal sorted
makkad said:
but wifi seems to be a problem will have a play around
Click to expand...
Click to collapse
I can't imagine that the application has any problem with wifi. Is your wifi set up correctly? Maybe you have some network issues (no nameserver, or something like that)?
johnpatcher said:
I can't imagine that the application has any problem with wifi. Is your wifi set up correctly? Maybe you have some network issues (no nameserver, or something like that)?
Click to expand...
Click to collapse
I belive its the custom brarnding done by Orange, They installed PVplayer 2 do the streaming this was optmized for the Orange TV (subscription service)
Orange must have configured the connections so that the streams are done over Wifi rather than GPS.
I have added the connection packages that I think will remove this barnding if you could you also make these into cabs for me.
I am sorry to hijack this thread but i have been trying to convert a package to a cab for installation and so far i have been unsuccessful
I use WinCE cab manager to import the files but how exactly do you find the registraty entries relevant for each package?
makkad said:
I have added the connection packages that I think will remove this barnding if you could you also make these into cabs for me.
Click to expand...
Click to collapse
I have attached them here. I haven't tested a single one of them, so maybe some of them don't work. Just report back .
mkouk said:
I use WinCE cab manager to import the files but how exactly do you find the registraty entries relevant for each package?
Click to expand...
Click to collapse
Any registry information is stored within the appreciate "rgu" files, which come along with the oem package.
thanks will give them a try now
move post up in tread
mkouk said:
I am sorry to hijack this thread but i have been trying to convert a package to a cab for installation and so far i have been unsuccessful
I use WinCE cab manager to import the files but how exactly do you find the registraty entries relevant for each package?
Click to expand...
Click to collapse
hi Hi I am looking at how to create cabs from packages also Johnpatcher is creating packages 2 cabs for me right now.
This link has helped me create initflashfiles file which holds some information that will needed for wince (I think). i am still using google to find a solution.
well here is the link http://www.xdasite.com/showthread.php?t=1086
please post back if you can contribute more to this. In the meantime speak to John Patcher if you want cabs creating.
mkouk said:
I am sorry to hijack this thread but i have been trying to convert a package to a cab for installation and so far i have been unsuccessful
I use WinCE cab manager to import the files but how exactly do you find the registraty entries relevant for each package?
Click to expand...
Click to collapse
johnpatcher said:
I have attached them here. I haven't tested a single one of them, so maybe some of them don't work. Just report back .
Any registry information is stored within the appreciate "rgu" files, which come along with the oem package.
Click to expand...
Click to collapse
Hi I have installed them and there were no problems. But they did not solve me issues with the phone using GPRS even though a WiFi connection is available. I used a dummy GPRS connection and streaming over Wifi works.
So some where on the phone Orange must give a preference to use GPRS.
If you could create these cabs that i will attache I will see if this solves the problem.
I did another search on the forum and for bbc iplayer problems and pointed to this thread. the post i did is
http://forum.xda-developers.com/showpost.php?p=3554208&postcount=195
This packages you created seems to have helped indivduals as the views are now 13 but no feedback as yet.
The Pv package I hope to use to remove PVplayer
Again thanks
Ps I have I can extract pacakages create initflashfiles am i far of from creating packages.
Here you go. I had to upload to Rapidshare, as the forum had rejected the archive .
I haven't tested them, just as above .
makkad said:
Ps I have I can extract pacakages create initflashfiles am i far of from creating packages.
Click to expand...
Click to collapse
You don't need any initflashfiles in order to create cab files. initflashfiles are useful when you create oem packages out of cab files .
But I guess these packages won't solve your problems, normally something like that is done with some registry entries.
Why you don't just use an unbranded rom?
johnpatcher said:
I have attached them here. I haven't tested a single one of them, so maybe some of them don't work. Just report back .
Any registry information is stored within the appreciate "rgu" files, which come along with the oem package.
Click to expand...
Click to collapse
Thanks for the information Johnpatcher. I was extracting the rgu file and somehow it was not showing as extracted in the folder because of my folder view settings! duh
i have managed to import the reg file and my application installs successfully but when i am trying to run the application i get the message "The file cannot be opened. Either it is not signed with a trusted certificate or one of its components cannot be found."
What am i doing wrong?
mkouk said:
What am i doing wrong?
Click to expand...
Click to collapse
Either you have done something wrong , or you security policy isn't right, you can adjust it using Advanced Config or HDTweak.
johnpatcher said:
Here you go. I had to upload to Rapidshare, as the forum had rejected the archive .
I haven't tested them, just as above .
You don't need any initflashfiles in order to create cab files. initflashfiles are useful when you create oem packages out of cab files .
But I guess these packages won't solve your problems, normally something like that is done with some registry entries.
Why you don't just use an unbranded rom?
Click to expand...
Click to collapse
thanks John . it does works I will live with the Wifi creating dummy connections.
Thanks
johnpatcher said:
Either you have done something wrong , or you security policy isn't right, you can adjust it using Advanced Config or HDTweak.
Click to expand...
Click to collapse
I have checked the security policy and through Advance Config i have disabled the checking certificate notification when installing so no issues there. The problem arises after the cab is installed when i am trying to run the application i get the error message.

Opera can't really exit

With some of the new roms Opera cannot really exit (it remains permanently on in the background). One of the problems is that many opera settings require a proper exit and restart to be established. For instance, I would like to increase the number of tabs that I can open in Opera but am not able to because Opera will not exit.
Apparently some have solved this problem by making the following registry change
[HKEY_LOCAL_MACHINE\Software\Opera\Preload]
"RealExit"=dword:1
This has not worked for me however. Does anyone have another solution?
I am using Panosha's latest Black Pearl 2.4 Light rom.
Thanks,
Opera is loaded by the silly Push Internet thing. You can disable it by setting Enable to 0 in HKLM\Software\HTC\PushInternetEngine.
It works on my own ROM, but I've seen a report that it doesn't help with Panosha's ROM. You can try though, it definitely won't hurt.
Thanks. I tried this and it does not help at least with Panosha's rom.
If you post the contents of your \HKLM\Software\OEM\MASD key (I assume you are using Panosha's 2.4), I can check which version of Push Internet stupidity you have - maybe it'll be possible to replace the dll.
vangrieg said:
If you post the contents of your \HKLM\Software\OEM\MASD key (I assume you are using Panosha's 2.4), I can check which version of Push Internet stupidity you have - maybe it'll be possible to replace the dll.
Click to expand...
Click to collapse
Thanks for sticking with me.
Do you need a few snapshots (screen captures) of the entire folder or just PushInternetEngine (String 1_0_19132326_0)? If it's the former I'll take some screenshots and post them.
apap said:
Do you need a few snapshots (screen captures) of the entire folder or just PushInternetEngine (String 1_0_19132326_0)? If it's the former I'll take some screenshots and post them.
Click to expand...
Click to collapse
Just export the whole thing in a .reg file, rename to .txt and post here.
apap said:
Thanks for sticking with me.
Click to expand...
Click to collapse
No worries, I'm interested in getting rid of this Push Internet thingie myself. Let's hope we can work something out.
Vangrieg,
Here's the promised reg file (I hope it helps):
[HKEY_LOCAL_MACHINE\Software\OEM\MASD]
"RSSHub"="2_1_1_1066_R3"
"JbedJava_5_1"="0_0_20080912_5_1"
"Power"="2_22_0_0"
"RandomAccess"="4_1_18224021_0"
"FullScreenPlayer"="1_6_19132732_00"
"CMBandSwitching"="0_9_2_2"
"HTCStartUp"="1_7_0_1"
"WiFiSettings"="1_2_1_0"
"ConnectionSetup"="2_7_37654_1"
"Mute"="1_1_2_1"
"DeviceInfo"="1_32_0_0"
"DRMMiddleware"="1_5_19122329_00"
"DShow"="2_00_19132929_0"
"MessageEnhancement"="1_0_19132329_00"
"AdvancedNetwork"="1_0_10_1"
"Notification_Enhancement"="1_2_1913_3822"
"STK_UIPPC"="4_67_0_0"
"Album"="3_0_19132927_0"
"Opera_Browser"="9_50_15925_0"
"ClearStorage"="1_39_0_3"
"HTCScroll"="1_0_19113219_0"
"CommManager"="2_8_7_2"
"IME_EzInput_Western"="2_0_340550_01"
"USSD_Service"="4_33_0_0"
"USBToPCPopUp"="2_2_19132831_1"
"HTCAnimation"="1_1_5_2"
"BootLauncher"="1_0_35330_2"
"Field_T_e_s_t"="2_19_0_0"
"PKG"="1_1_0_0"
"LongPressEndKey"="1_2_19123727_00"
"MicrophoneAGC"="0_91_0_3"
"App_Service"="1_65_0_1"
"InvokeSIMMgr"="1_11_0_3"
"PictureEnhancement"="1_50_19121428_00"
"SIMLock_exe"="4_23_0_0"
"CMPhone"="0_9_3_2"
"NewMailAccount_exe"="1_11_0_0"
"Calculator"="1_0_19132026_00"
"HTC_EmailSetupWizard"="1_0_19132328_0"
"MyCPL"="3_13_0_6"
"RingtonePlugin"="1_00_080624_4"
"Arcsoft_MMS"="5_0_43_111"
"FileUpload"="1_1_0_0"
"VolumeControl"="2_1_19133825_0"
"SharedModules"="1_01_19131231_00"
"EnlargeStartMenu"="1_2_37648_1"
"HTCFDN"="0_9_2_2"
"NewContactCard"="1_0_19132626_00"
"Manila"="2_0_37889_1"
"MenuEnhancement"="1_0_19132733_00"
"BluetoothSetting"="2_11_0_1"
"StreamingSrcFilter"="2_7_19132219_00"
"PowerOffWarning"="2_6_0_0"
"GSensorCalibrator"="1_1_18212730_0"
"SIM_MGR"="6_64_0_2"
"MediaToolkit"="1_0_19132331_00"
"SignatureReplace"="1_2_0_0"
"QuickGPS"="1_01_19131225_00"
"CleanGPSData"="1_1_0_0"
"RunCC"="1_0_9_0"
"HTCSettings"="1_3_8_2"
"HTCApplication"="1_11_0_0"
"Redial"="1_2_0_0"
"CMPin"="1_0_0_0"
"YouTube"="2_5_19131232_02"
"AudioManager_Eng"="1_7_19122322_h"
"STK_Service"="4_85_0_0"
"DataDisconnect"="1_14_0_0"
"WLANSettings"="2_5_0_0"
"IME_Engine_Western"="2_0_342750_00"
"PushInternetEngine"="1_0_19132326_0"
"mHubVO"="1_71_090331_X0"
"CMBluetooth"="1_1_0_2"
"zlibce_m"="1_2_3_0"
"ResourceProxy"="1_0_19132627_00"
"SmartTouch"="1_2_19132028_1"
"ContactUtilityEngine"="1_0_19132213_0000"
"PhoneSetting"="6_31_0_2"
"HTCFontLink"="1_0_19132133_1"
"ConcurrenceMgr"="1_5_19113219_0000"
"VideoTelephony"="2_5_33904_0"
"OutlookEnhancement"="1_1_1822_3121"
"HTCMessage"="1_81_281_0"
"Wi-FiWizard"="1_0_0_2"
"RestoreGPS"="1_0_0_0"
"TaskManager"="2_1_37657_1"
"StorageLow"="1_0_0_3"
"StreamingMedia"="3_1_19132724_00"
"USBtoPC"="1_23_0_2"
"TouchFlo"="3_0_32567_2"
"SensorSDK"="4_0_19122829_0"
"HTCUtil"="3_22_0_0"
"Camera"="6_15_34231_1"
"DiscretixDRM"="1_0_20090315_00"
"FMRadio"="1_7_19121620_00"
"BTSAP"="3_2_0_R6"
"PhoneCanvas"="3_50_34296_0"
"CheckAutoRun"="2_18_0_0"
"HTCGesture"="1_0_30346_2"
"ButtonSetting"="3_15_0_0"
"AutoShortcut"="1_1_2_0"
[HKEY_LOCAL_MACHINE\Software\OEM\MASD\HTC Customization]
"Version"="blackstone-HTC-080723"
To begin with, try to replace the pushinternet dll (simply copy it to \Windows with Resco Explorer or Total Commander and reboot).
If this doesn't help (and you made sure the file was indeed replaced - check modification time/size), we'll see what else can be done.
vangrieg said:
To begin with, try to replace the pushinternet dll (simply copy it to \Windows with Resco Explorer or Total Commander and reboot).
If this doesn't help (and you made sure the file was indeed replaced - check modification time/size), we'll see what else can be done.
Click to expand...
Click to collapse
Vangrieg,
This worked! I don't think Opera actually exits once started but multiple tabs took. This is what I wanted so I really appreciate your help.

Categories

Resources