Hi all,
anyone know what does AddContacts.exe and RestartRadio.exe in the Ext Roms??
Tks!
AddContacts.exe -----> ???
RestartRadio.exe -----> Tap it... and your Phone ON, Tap again, your Phone OFF, ....for Phone ON/OFF.
For me it in Ext.Rom is not present
zgan said:
For me it in Ext.Rom is not present
Click to expand...
Click to collapse
I found this files in iMate_Arabic_ExtRom_131112_WWE_SHIP (Kitchen Edit). But with no comments about what it does!
So i try to Cook one ExtRom with and other without...
And i can't see the diference... but it can be because it need to be configured some here!
can anyone please upload the file restartradio.exe, i really need a file to turn radio on and off.. thanks
can anyone please upload the file restartradio.exe, i really need a file to turn radio on and off.. thanks
@ Atary
I have seen that file before in the kitchen, dont use it if you want to cook your rom based souly on the fact nobody knows what it real does.
@ mangal
Do your home work its in the kitchen
http://wiki.xda-developers.com/index.php?pagename=ERK_X_120115
To Turn the radio on of try the Flight mode!
Thanks a lot! i've got it... it's much easier to turn my phone on and off without selecting the tiny icon to enable flight mode, and also flight mode switches off the wifi
KatokKolor said:
AddContacts.exe -----> ???
RestartRadio.exe -----> Tap it... and your Phone ON, Tap again, your Phone OFF, ....for Phone ON/OFF.
Click to expand...
Click to collapse
The add contacts adds some of Cingular's contacts for customer service and such.
mangal said:
Thanks a lot! i've got it... it's much easier to turn my phone on and off without selecting the tiny icon to enable flight mode, and also flight mode switches off the wifi
Click to expand...
Click to collapse
Sorry but i can't use or it is not correct installed...
Can you give me more info about it?
Tks,
Alex
@Atary
Just download the attached file, and put it anywhere on your xda, then tap on it, it changes the state of your radio (e.g. if off, it turns on, and vice-versa).
I am using XDA IIs, and it works fine, i even created a shortcut to it in the start menu...
Hope it works!
i know this thread is old...but, thank you mangal for the file...ive been looking for something like this...awesome!!
Related
I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.
is there a way to make the wing run a program when u turn the phone on???
Copy a shortcut link of that progam into the \windows\startup folder
no im talking about like if u turn ur phone off and turn it back on when u unlock it and put u simpim( if u put one) without doing anything else some programs will start running (for example: htc album)......can u put the wing to do that?
Which program would you like to run after you switch on your Wing
Is your HTC Album really running every time you activate your device or was it just an example, just being a little confused here
unpapi_4u said:
no im talking about like if u turn ur phone off and turn it back on when u unlock it and put u simpim( if u put one) without doing anything else some programs will start running (for example: htc album)......can u put the wing to do that?
Click to expand...
Click to collapse
You mean when you bring the phone back from "sleep", not turning it off and on, do you?
i want to put pointUI: home or any program i choose to run as soon as i turn on my phone
unpapi_4u said:
i want to put pointUI: home or any program i choose to run as soon as i turn on my phone
Click to expand...
Click to collapse
make a shortcut to \windows\startup. then it should be started after softreset.
BUT pointui has some bugs - that it can be closed by tapping x - and once it is closed you have to enable it again. BUT it should start after suspend mode automaticly...
unpapi_4u said:
i want to put pointUI: home or any program i choose to run as soon as i turn on my phone
Click to expand...
Click to collapse
Use memmaid and create an entry for the desired app in the notification queue to start the app on 'wake up'
can u gimmy a link to the programs and write the steps? thanx in advance
Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Can you explain what´s in that cab?
shinobi_uk said:
Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Click to expand...
Click to collapse
Nothing new here...
You could also easily do it with Diamond Tweak
MonteCristoffOn said:
Nothing new here...
You could also easily do it with Diamond Tweak
Click to expand...
Click to collapse
Actually i found that using DT didn't work either, and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
horstborsch said:
Can you explain what´s in that cab?
Click to expand...
Click to collapse
Four registry tweaks, and a text file. Nothing sinister.
shinobi_uk said:
Actually i found that using DT didn't work either
Click to expand...
Click to collapse
It works for everybody... even on all bepe's ROMs.
and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
Click to expand...
Click to collapse
If so, good luck for making cab for each Diamond tweak...
Cheers.
MonteCristoffOn said:
It works for everybody... even on all bepe's ROMs.
Click to expand...
Click to collapse
Well i applied the tweaks and my screen still went blank when calls connected, I'm happy to test it again as I may have been using an older version.
If so, good luck for making cab for each Diamond tweak...
Cheers.
Click to expand...
Click to collapse
Well actually it's been very easy to achieve by taking registry snapshots, and then using diff on a linux box to find the changes, then import them into a cab file.
So thanks for wishing me luck but it's not required.
Sarcasm breeds sarcasm and frankly i'm slightly ammused that on a forum designed to help users share tips and software, a simple CAB i use after new ROM flashes has created such a hostile response.
I'm not attempting to replace or belittle your tool monte, it's certainly streets ahead of what i can do at the moment, however as bepe's ROM lets me run cabs at build this way is nice and easy for me to ensure that if I need to do a hard reset I can reinstate my registry tweaks during the reset without having to install any additional software.
What's so bad about the screen blanking out during a call?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
The registry tweaks in Advanced Config did not work on my phone either, but this cab did the job. Thanks shinobi_uk
THIS is effing amazing
Been looking for something like this for a looong time, cheers
Brilliant, I'd tried the registry tweaks in the tweaks thread, and advancedconfig without any luck and this cab worked perfectly.
I haven't tried DiamondTweak, looks interesting though.
This works perfectly. Big Thanks!
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
Have you tried to dial a requested code with a blank screen?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
It's not that bad, it just annoys me when I'm phoning numbers where you have a number menu system to get through.
It's strange that it's something no other WM phones I've used have done, yet theres no menu option to disable it.
shinobi_uk said:
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
Click to expand...
Click to collapse
here here...me too
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
If you'll think about it for a moment, during a call we never really need the screen to be active for more than 1 minute or so, from the last time we touched it. If you are calling a digital voice machine (either your voicemail or anything), 99.999% of the time it won't take more than 1 minute between key presses.
The ideal tweak should just make the screen behave like when you're not in a call, meaning the screen reduces brightness after ~30 seconds, and shuts down after ~1 minute. In order to be 100% on the safe side, you could make it shut down after 2 minutes from last key press. BUT, making it never go to sleep is simply a waste of battery if you're doing for example a 30 minutes conversation.
center button and screen back on
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
But i dont think we should discourage anyone from making any kind of cab if they desire.
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
Click to expand...
Click to collapse
Still, it is unnoying to press that damn key every 5 seconds. The screen should shut down after 1-2 minutes, but NOT never.
Noam23 said:
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
Click to expand...
Click to collapse
Thats abosolute BS. It is NOT flawed. If you dont want your screen to stay on just - dont use the CAB. I think most users around here are smart enought to know that keeping the screen on during a call takes a battery hit. If they use the CAB as I intend to they are willing to accept this.
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
hotdog53 said:
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
Click to expand...
Click to collapse
u need to install advanced confog tool from Schaps, there is an option to disable device sleep while on call.
CSD connection
The screen also turns itself off when I use a CSD connection for internet access on my device. I assume it's because the phone thinks I'm making a regular phone call, so it turns the display off.
I found that if I load up tomtom in the background, the screen stays on, but after a while, the screen starts to turn itself off for about a second every few seconds, so it has only worked as a temporary solution.
I will give the advanced config tool a try. ty
IDK know about advanced config, but kaiser tweak is a nifty little program to change a lot of settings
Advanced config is just about the same as KaiserTweak.
I think kaiser tweak has a few more options now. I had advanced config on a couple of roms i flashed and i think kaiser tweak is a little more encompassing as far and the number of features you can tweak.
dsoler702 said:
I think kaiser tweak has a few more options now. I had advanced config on a couple of roms i flashed and i think kaiser tweak is a little more encompassing as far and the number of features you can tweak.
Click to expand...
Click to collapse
u should know that Nikagl made some "upgrade" to advanced config tool so it has almost the same tweaks as kaiser tweak.
start-settings-battery power (uncheck the box) -but that will make ur screen on even in other apps, when recieved other texts...etc
out of curiosity - why do u need ur screen on?
hotdog53 said:
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
Click to expand...
Click to collapse
jahrami said:
start-settings-battery power (uncheck the box) -but that will make ur screen on even in other apps, when recieved other texts...etc
out of curiosity - why do u need ur screen on?
Click to expand...
Click to collapse
I prefer having the screen on regardless where I am. All boxes are unchecked>oower, backlight,etc.
but the damn thing goes off after a few seconds when I make a phone call and the keypad can't be seen to press a number when prompted to do so. When I want the screen off, I use psshutXP (light off)
How can I get the advanced configuration tool?!
Thx!!
Get it HERE
hotdog53 said:
I prefer having the screen on regardless where I am. All boxes are unchecked>oower, backlight,etc.
but the damn thing goes off after a few seconds when I make a phone call and the keypad can't be seen to press a number when prompted to do so. When I want the screen off, I use psshutXP (light off)
How can I get the advanced configuration tool?!
Thx!!
Click to expand...
Click to collapse
The advanced config tool should have been the first thing to try. Very helpful app.
Mikulec said:
The advanced config tool should have been the first thing to try. Very helpful app.
Click to expand...
Click to collapse
o.k I have the advanced config tlool installed on my kaiser/tilt. What do I do to keep the screen from going off during phone calls?
Thx!
hotdog53 said:
o.k I have the advanced config tlool installed on my kaiser/tilt. What do I do to keep the screen from going off during phone calls?
Thx!
Click to expand...
Click to collapse
I found out how, but after disabling phone sleep and fast sleep, the screen still goes off when using the phone. Does anyone have a registry tweak to keep the screen ON when using the phone?!
Thx!
hotdog53 said:
DISREGARD. I found out how.
Thx everyone!
Click to expand...
Click to collapse
ur welcome.
hotdog53 said:
I found out how, but after disabling phone sleep and fast sleep, the screen still goes off when using the phone. Does anyone have a registry tweak to keep the screen ON when using the phone?!
Thx!
Click to expand...
Click to collapse
I found a registry tweak that resolved this issue. It works!!!!
HKLM/Drivers/Built-In/RIL>Enable Fast Dormant Display During Call....Change value from 1 to 0. Soft reset. The display will stay on during a call!
Now I have another issue that a search didn't help. When I'm on the internet and using the stylus to scroll down the page, the scrolling slows down to nearly a stop just a very short ways down the page!!
Can someone pls help me with this?
Thx!
hotdog53 said:
I found a registry tweak that resolved this issue. It works!!!!
HKLM/Drivers/Built-In/RIL>Enable Fast Dormant Display During Call....Change value from 1 to 0. Soft reset. The display will stay on during a call!
Now I have another issue that a search didn't help. When I'm on the internet and using the stylus to scroll down the page, the scrolling slows down to nearly a stop just a very short ways down the page!!
Can someone pls help me with this?
Thx!
Click to expand...
Click to collapse
Here's a screenshot of the phone stay awake tweak.
how do i manage to hide that icon?
turn on wi-fi
nah i don't really know
haha.. very nice.... :|
i want to hide that icon not to change with another one :|
help!
please
revox1 said:
help!
please
Click to expand...
Click to collapse
don't know does it work or not. But try, use Advance config tool 3.3, open Phone configure (in AC tools 3.3), go to last sentence, 3G prefix, and change 3G to and symbol U want. Press Done when finish and restart ur phone.
i try'it but still nothing