I've stuggled on with the unreliable ROM that my PDA2K came with because I have been unsuccessful at upgrading using my Mac and Virtual PC 7 (Windows XP).
I don't have access to a PC, and wondered whether anyone could give me any guidance.
Is it possible to upgrade the rom directly from the device itself, or are there ROM installers for other Blue Angel phones that would work via Virtual PC?
Any help very welcome - but please give as much detail as possible if telling me to install or change things manually. I've read posts about 'extended roms' and taking bits from here and there and I've no idea what this is about.
hello fellow mac user
What exactly is the problem?
ANy error messages? are you trying via BT or USB ?
HI,
When I tried to upgrade previously the PDA2K's screen showed USB but I got an error (sorry I cant remember the number code; radio upgrade error or something).
Recently, and I don't know what's changed, I just get Error 101: Connection Failure. When I try to run the upgrade the device does a soft reset at the beginning, then there is a long pause then I get the error. It seemed to manage more previously (may be that was an earlier from upgrade, but it never worked anyway!).
Have you been successful from your Mac?
Just looked back at my old posts on the howard forums, and discovered it was Error 114 I was getting previously (with the first ROM upgrade). I presume I'm getting the 101 connection error now that I'm trying to use the latest ROM upgrade.
One thing I'm about to try myself is to switch off both the windows and Mac OS X firewalls just in case they are interfering with the process.
Just to be more specific:
It comes up with the info from the phone and the upgrade, then I click next to start the upgrade; the device does a soft reset then repeatedly the device says it's connecting to host, the PC says reading info from device; then after a while I get error 101. As soon as the ROM upgrade installer quits, then Activesync reconnects the device (as guest).
Are the ERK files supposed to be run from the device? Will this help me? I've just downloaded one, and downloaded a thing called WinRAR but the resulting files say they aren't Win32 applications; and most of the contents of the folder are .rar files even after I extracted it. Wierd. Please can someone help!
Oh well, it's getting late here in the UK, I will just have to try again another time. Going to have to reinstall everything again now (as I have after every failed attempted at a ROM upgrade over the past few months). This is the last time I buy anything with a Microsoft operating system!!!!
Can anyone help?
Anyone?
Hi
Sorry but I don't think I am going to be much help.
I too am a Mac user with VPC and happily ActiveSync every day using VPC 7.01.
HOWEVER I would never try and use VPC to do something as basic as a ROM upgrade.
I managed to borrow a PC from someone at work and used that for the upgrade. I went on the basis that a ROM upgrade is so basic to the device and would likely need real PC hardware that I would not risk it.
Is there no colleagure, friend or workmate that can help you out?
Regards.
Robin
Hi,
Thanks for replying. I had bought Virtual PC because I just couldn't find any other way of getting a lot of the software onto the iMate. Having made this investment I hoped it would work with the ROM upgrade too.
I did manage to get use of a PC yesterday, but unfortunately it didn't work either. The PDA2K reset itself at the start, then after a delay the updater gave error 101 connection error, exactly the same as with Virtual PC.
Later, I managed to get someone really helpful at i-mate on the live support (and for once it didn't time out) and I went through a few things, including pressing power-reset-record (so that USB is displpayed) and trying from there. It still didn't work, I got Error 114 after the updater sat at 0% for several minutes.
This leads me to the exact reason I didn't want to have to rely on someone elses PC: having access to it for a limited time I tried repeatedly the ROM upgrade yesterday with no success. Later, at home, I got help from iMate and some ideas that will be trying again with a PC, but now I've got to wait for another opportunity to use a PC. What concerns me, is if I ever get a major problem the phone may be unusable until I next get access to a PC. Worse still - if the phone locks up when I'm using the PC and I don't have the time/knowledge to resolve it, I could end up with a non-functioning phone. It's much easier to tinker with these things in the comfort of my own home when time is less of an issue.
I just received my K700i yesterday. I decided enough was enough. I'm going to sell the PDA2K as soon as I've got the ROM sorted out. I really did try to get on with this device but it's caused me more grief than I have ever had with an electronic device before. I learned a lot, setting up GPRS, wifi, bluetooth, found all sorts of useful software, used VNC to control my Mac remotely etc etc, but at the end of the day I just couldn't rely on it. Some days I could get email, some days I couldn't. Some days people would receive the SMS I sent, some days they didn't. Sometimes the people I was calling could hear me, sometimes they couldn't. Sometimes the phone would stay switched off, sometimes it turned itself on and drained the battery. The list of problems I had with this phone were endless. Hence why I was trying to get the ROM upgraded.
I understand your concenr and problem.
I actually have the latest ROM installed on mine and I STILL get someof the problems you describe.
Only Microsoft could get away with writing such a crap operating system to run a phone.
And i-mates issues just compund the Windows issues.
Good luck.
Robin
ive never bothered even trying to run activesync thru vpc. It was a bit hit and miss on my XDA1 so as soon as my xda2i arrived i just bought missing sync from mark space. Hassle free syncing and installing, plus the ppc gets mounted like a mass storage device too.
Trouble is I use Outlook at work and need to sync it to my PDA.
I cannot even use Entourage as we are a) running to old a version of Outlook server and b) Missing Sync will not sync with Entourage.
I am stuffed both ways.
Robin
Me again!
Just thought I'd let everyone know that I did indeed succeed first time on a PC today (having pressed power-reset-record to go into bootloader mode first).
So, as everyone told me, it was necessary to use a PC, and Virtual PC on a Mac just wont work.
I'm getting on ok with my K700i, although the email seems a bit limiting (doesn't seem to have message titles displayed, and a short limit to the length of the email).
My plan: use the K700i for a few weeks and see how I get on, then perhaps I might try the newly upgraded PDA2K for a few weeks, and see which I prefer.
The other complicating factor is that the SIM free Treo 650 has just become available, but I'm going to hold fire on that for now. Perhaps if I'm not happy with either the K700i or the upgraded PDA2K then I might consider it...
Related
Every time I try to do the rom upgrade for my PDA2K the device does a soft reset (when it's reset it then reconnects to activsync, and the green logo reappears) and after a while the ROM upgrade software tells me there is an Error 101 Connection Error. It's driving me nuts, I've tried all sorts of variants, soft reset first, hard reset first, USB port, USB2 port, Activesync 3.7.1, activesync 3.8, Windows XP, Windows 98. I don't understand why there is a connection error, because I can connect to activesync correctly, it even reconnects after the ROM upgrade causes it to do a soft reset. Please help! I've even tried following directions to copy the temporary files and running those directly but the result is the same.
Bizarre
Try connecting your device then stopping activesync (task manager, then stop "WCESCOMM.exe" in XP), then run the upgrade.
Regards,
Dom
Hi,
Thanks for the suggestion. Unfortunately the process kept reappearing during the attempted upgrade and I still got the Error 101 message.
When activesync starts, let it complete the sync and then go ahead and run the upgrade. I experienced this last weekend
victor
I've tried it dozens of times. I've let it sync on many occasions, and I've also tried it on many occasions with it connected as guest.
I tried iMate online support for the third occasion regarding this matter, and as before once I tell them what the problem is they then don't respond (they also never respond to my emails either).
I have actually considered hiring a laptop for 24 hours, just in case it's my Mac that is causing the problem (but I'm using Microsoft Virtual PC running Microsoft Windows XP to upgrade the ROM on a phone running Microsoft Pocket PC, so I really don't see why it shouldn't work. Normal sync, and installing software via Activesync work fine. I'm on the brink of selling the device because it's just caused me too much grief. The trouble is, it's put me off ever buying another Pocket PC, and I cannot find a suitable alternative. Every device I read about has some reason why it wouldn't be suitable.
At last I've had the opportunity to do the ROM upgrade on a 'real' PC running Windows XP.
It behaved in EXACTLY the same way as running Virtual PC on my Mac (even down the the odd delay before Activesync recognises that the phone is connected - I had assumed that this was because of the inefficiency of running an emulator!).
Error 101 connection error every time. Firewall switched off. Tried with and without hard reset.
I wonder if there could be a hardware fault with my phone? The pins on the phones connector all look fine.
Now I am really stuck, I seem to have completely run out of options (and I don't want to send the device of the the middle east either!).
One last idea. Is there anything more than a hard reset? I've just removed the battery. If the unit is completely deprived of power will this take it back to factory settings any more than a hard reset?
NOPE!
Hard Reset is the best you can get bar removing the insides of the phone and swapping it with someone else's!!!
Dom
if you do remove the battery you need to put the lock switch back into the postion as if it the battery was in. This seems to make the phone think that the battery is dead and then drain the internal backup one.
I'm having problems running the ROM upgrade by iMate. I keep getting Error 101 connection error, and I had grown to assume this was a problem relating to running from Virtual PC on a Mac rather than a real PC.
Today I at last managed to get access to a PC running Windows XP, activesync 3.7.1, and got exactly the same problem. I tried it several times.
I'm beginning to wonder if any of my past failed attempts on my mac have done something to the phone that is preventing it from being controlled properly by the ROM upgrade software?
Is there anything more than a hard reset to take the device back to factory settings?
Please - if anyone can help me get this sorted I'd be really grateful. The device is just too unreliable in it's current state, and I just cannot manage to get the ROM upgrade working. It's just unbelievably frustrating!
A hard reset will take the device to the last rom upgrade.
Now in your case this could be the failed rom upgrade which you did over the mac. You would have to look at the device info to check that.
If I was you I would do a rom upgrade of a PC and not off a mac, not that I have anything agaist macs (apart from ...) Its just that I know it works of a pc.
I tried a ROM upgrade from a PC this morning and it didn't work. It kept reseting the device, then said Error 101 connection error (even though it was connnecting fine to Activesync 3.7.1).
I've made a little progress since then. I've pressed power-reset-record to put it into the 'bootloader'? and this allows the installer to go one step further and says installing the radio rom (but never gets beyond 0%). I now get the error 114.
Now that I've got this far, I will have another go with a PC on Monday and see if that makes any difference.
I've just bought the SE K700i which I hope will be a little more reliable. I really just want to get the PDA2K upgraded so it's in a fit state to sell, and perhaps I might even consider keeping it if the ROM makes a radical difference to reliability. It's so nice to go back to just using iSync with the K700i without go-between software and Virtual PC and all that hassle. My plan is to use the K700i until something comes along that catches my attention (I'm still not convinced by the Treo 650 or P910, and I wont forget my experience of Pocket PC for a while!).
If I may add my experience on similar situation, I got a device which was upgraded using a wrong ROM file, and now it ended up with no radio and no operator ID :shock: ... and can't accept "standard" ROM upgrade ... I managed to be able to upgrade the ROM or Ext ROM individually by using null operator ID ... but when it comes to Radio upgrade it doesn't start at all giving failure.
Biso007
So what is the story if you let the device drain down and then take out the battery. Would a Normal offical update not work then.
I have yet to read anything about were on the device the Opid is coded in the hardware. What I know is that the ndf have the opcode in the header and this is checked against the getdevicedata.
I have had check for the opcode in regedit with no luck. (this I some what expected as I did not feel that it is part of the OS).
anybody have a better understanding on that issue?
when I run getdevicedata.exe I get nothing except "PH20B" ... so I used NULL opid to upgrade ROM and Ext ROM ... but this trick didn't work with the Radio part ... more over, I tried the trick of draining the battery down ... it worked only once and the radio is back (I don't know how!!) however, with the last reset after the upgrade the Radio is gone again!!
My suggestion so far is that the Radio part is there but it's inactive due to a problem with the charging circute ... and since the Radio is the 1st stage of the upgrade, it holds the whole process failed.
maybe someone with solid experience with the device design itself can shed more light on this issue.
Hum!
Well what I know about the radio is that it is Lang independent, which means what ever check is run on the upgrade it does not look for the lan code.
Further it must check against the radio type as this is part of the config file that is in the upgrade.
I know that a hardreset will load what ever file is around (so it must be stored in the orignal format on the device, then loaded on hardreset). This seems not to be true for the EXTrom as this seems to be extracted as files on the device (thus you can flush it).
So we have a hardcored opid somewere on the device that now shows zero for you. What was the shipped version of it. Have you tried a ship.exe from your original device without using the xda-tools.
Can you tried a radio only upgrade and used your shipped opid in the fix.bat (maybe after a battery drain again)
Seems a shame to have a paper wheight and not a phone.
Crossing my fingers, but now it worked!! :lol:
The only additional action I took this time is to take the battery out and close the bottome notch which I believe has something to do with the backup battery.
When the device restarted, the Radio part is back with the original version, IMEI and call durations which confirms my idea that the Radio part was always there but blocked by a power charging issue.
Update [27/2/2005 6:40 pm GMT +2]:
I checked the devicedata.txt file and it has nothing except "PH20B" ... this means for me that this device will never accept any official ROM upgrade in the future ... and doing a hard reset is a potential risk to loose the Radio again :?
Happy New year to everybody...
Mine has started off bad, I just returned from my X-mas/New year break and I can no longer sync, install or uninstall programs ?
when I connect my PDA to the PC it sees it, but it can't sync, if I go to remove/add programs it shows empty nothing installed.
I can even brows the PDA but I can't copy files to or from it?
I'm lost, can anyone help me out on this I really don't want to do a hard reset.
Thanks.
Anyone.........?
tryed to reinstall active-sync?
did you installed some program has to do with network (kind of ftp-server or something else that uses some ports in you network-config)
i had the problem with filezilla ftp-server, using port 990 for ssl-authentification.
the problem was, active-sync also uses this port, but filezilla starting as service was bound to this, so AS could not work.
edi said:
tryed to reinstall active-sync?
did you installed some program has to do with network (kind of ftp-server or something else that uses some ports in you network-config)
i had the problem with filezilla ftp-server, using port 990 for ssl-authentification.
the problem was, active-sync also uses this port, but filezilla starting as service was bound to this, so AS could not work.
Click to expand...
Click to collapse
Hi Edi, No I haven't installed anything, but I think my problem might be something else (worse), I just realised that I can no longer copy move or delete files from either the PDA or the MC, I get an "access is denied" error.
Anyone have any idea what might have caused this? and better still, is there a fix.
I seem to be repeating myself lately with this answer, so I apologise if it seems down-right obvious, but have you ensured you have the latest version of ActiveSync/Windows Mobile Device Centre?
The reason I ask this is because I too was experiencing Sync problems using WMDV, but realised I didn't have the latest version (it doesn't automatically update with Windows Update, WTF?). Windows Mobile 6 is obviously programmed slightly different from revious versions, so updating Sync software is a simple step that's often missed...
Audio said:
I seem to be repeating myself lately with this answer, so I apologise if it seems down-right obvious, but have you ensured you have the latest version of ActiveSync/Windows Mobile Device Centre?
The reason I ask this is because I too was experiencing Sync problems using WMDV, but realised I didn't have the latest version (it doesn't automatically update with Windows Update, WTF?). Windows Mobile 6 is obviously programmed slightly different from revious versions, so updating Sync software is a simple step that's often missed...
Click to expand...
Click to collapse
Hi Audio,
Thanks for the reply, but I do have the latest version and I never had a problem with it until this week.
Just so i can try and help, what is it you are using Dave? AS or WMDV?
Audio said:
Just so i can try and help, what is it you are using Dave? AS or WMDV?
Click to expand...
Click to collapse
Hi Audio, I use both, AS at work and WMDV at home, both used to work fine.
And do you experience the issue on both?
EDIT: Apparently, there may be a problem with ActiveSync 4.5. Just take a look at this list of complaints about it lol.
One user stated:
"I was using AS4.2 with my ETen M700, everything was fine. I wanted to upgrade to WM6 and teh instructions said I needed to use AS4.5 I installed it and tried to connect my device - disaster! The rapimgr.exe process runs at 99% and slows the computer to a crawl.
After 3 attempts, I uninstalled it, and re-installed AS4.2 (available from www.microsoft.com) and now things are working again. "
This may be worth doing to see if this soilves your problem...
Audio said:
And do you experience the issue on both?
Click to expand...
Click to collapse
Yes I have tried it on three different machines, I can see the PDA but it won't sync or let me move or copy files.
It look like I might have to do a hard reset, but I'm hoping not
Also, a chap on a premium (you have to pay for support!) site said the following, which seems slightly similar:
"I've been using ActiveSync for a while now to sync outlook up to my motorola q. For some strange reason it's stopped working. The connection takes place, you get the little signal saying that ActiveSync picks up on it, the "Connecting" message, followed by the "Synchronizing" message... and nothing. It just hangs there. I've reinstalled ActiveSync and Outlook and did a hard reset on the phone. I'm convinced the issue is with the desktop, if I take the same PDA home, I'm able to sync up with my PC there. Does anyone know what happens during the Synchronizing phase and what could be possibly causing it to hang? ActiveSync 4.5 is a new beast, solutions to the older versions don't seem to apply.
If I hit the Stop button, ActiveSync hangs on the "Stopping" message and ActiveSync on the phone becomes unresponsive until I unplug the cable."
So even a Hard reset didn't solve this guys problems...
I would recommend uninstalling AS 4.5 from your machine, and installing 4.2. Reason being, i believe you need your phone connected to the computer when you install syncing software, so it more than likely "fiddles" with some very well hidden settings on the device. If this is the case, 4.5 may have [email protected] it up, but 4.2 may be your savior.
If you decide to give it a go, let us know how it goes...
Audio said:
Also, a chap on a premium (you have to pay for support!) site said the following, which seems slightly similar:
"I've been using ActiveSync for a while now to sync outlook up to my motorola q. For some strange reason it's stopped working. The connection takes place, you get the little signal saying that ActiveSync picks up on it, the "Connecting" message, followed by the "Synchronizing" message... and nothing. It just hangs there. I've reinstalled ActiveSync and Outlook and did a hard reset on the phone. I'm convinced the issue is with the desktop, if I take the same PDA home, I'm able to sync up with my PC there. Does anyone know what happens during the Synchronizing phase and what could be possibly causing it to hang? ActiveSync 4.5 is a new beast, solutions to the older versions don't seem to apply.
If I hit the Stop button, ActiveSync hangs on the "Stopping" message and ActiveSync on the phone becomes unresponsive until I unplug the cable."
So even a Hard reset didn't solve this guys problems...
I would recommend uninstalling AS 4.5 from your machine, and installing 4.2. Reason being, i believe you need your phone connected to the computer when you install syncing software, so it more than likely "fiddles" with some very well hidden settings on the device. If this is the case, 4.5 may have [email protected] it up, but 4.2 may be your savior.
If you decide to give it a go, let us know how it goes...
Click to expand...
Click to collapse
Hi Audio, I don't know what to do, I started another thread about no longer being able to either copy, move, delete, install or uninstall anything, I really don't think it's a sync problem anymore. I will wait another day or so and then I'm going clear storage and start again.
what really pisses me off is my wife has no problems at all? perhaps my PDA is ******.
Exactly the same has just happened to me - I tried to connect to ActiveSync this morning to copy a file across via bluetooth, but it refused to connect. I plugged in the USB cable, nothing - the phone charges but ActiveSync does not want to know.
I deleted the device in AS, tried to add a new one - nothing found.
I last sync'd up fine 4 days ago.
I am using Dutty's DualTouch v1.1 release.
I am using AS 4.5.0 build 5096
If I discover services via BT from the kaiser to the computer it finds the ActiveSync service.
I have done a soft reset, no difference, restarted the PC, same. I haven't applied any Windows Updates or made any changes since it stopped working.
I might try rolling back to AS 4.2
Edit: Same with AS4.2
Think it might be clear storage time
Cleared storage and then it worked fine...will take the opportunity to upgrade to dualtouch v2
Hi Blaze, damn it's annoying isn't it, my next move is clear storage as well.
Hope mine works again.
It's bloody happened again I reflashed the rom with Duty's Dual Touch V2. Much better rom, but activesync has just given up again via BT and usb. Maybe it's some inherent problem with WM, or with Duty's roms - which are you using Dave?
I've tried it on a fresh build of XP Pro on an old machine with nothing than AS & Outlook 2k3 on - same, AS sees the device, but wont sink. Problem seems with the device...
Dave... said:
perhaps my PDA is ******.
Click to expand...
Click to collapse
Sorry I cant help other than to say my dutty rom is working fine on WMDC.
But I had to post and ask why you asterisked out the "ed" and left the lrest of the word in?
Brilliant! Lmao! :d:d:d
unwired4 said:
Sorry I cant help other than to say my dutty rom is working fine on WMDC.
But I had to post and ask why you asterisked out the "ed" and left the lrest of the word in?
Click to expand...
Click to collapse
Good Point I didn't even notice, put it down to stress...
PS: For anyone who's interested, I ended up doing a hard reset, reinstalled my apps, restored my backups and it's working fine now.
Did you have F-secure Mobile installed? If not, I could take that away from possibilities that's causing this problem
I have AT&T 8925, live in United States, Run on a Dutty Rom and pretty much everything else is simple. No serious tweaking or reg hacks.
So Today, I go into work, plug in my PDA, and no sync. It is charging via the USB, but not syncing to Activesync. I need Activesync, it has all my contacts, appointments, etc etc. In the process of trying to troubleshoot this problem I have wiped my phone clean.
I have tried it all;
clearing storage on phone
deleting activesync off PC (4.5) and reinstalling, multiple times
Used Microsfts Troubleshooting guide
I have installed Activesync on three different PC's and all wont recognize the phone, as if its not there, but it does charge. I also have tried 3 different USB cords.
I don't know what to do, I even stumped the HTC troubleshooting tech guy. I also am screwed since if I send this phone back to AT&T under warranty to get a new one they will see the Dutty ROM and that will void my warranty. I would reinstall the original Windows/AT&T shipped Rom, but I cant get the Activesync up or don't know how to get a PC to recognize my PDA.
So.........I beg and plead, lend your advice for as long as this thread goes (hoping its in the right place) I will try your ideas, theories, and what nots.
IT seems like it would just be something so simple......is it? Where is my Data Connection.....
Thank you fellow XDA members for your time and assistance.
~b
Do you get the "connecting" sound on the PC when you plug the device (same one you get when plugging any USB device)? If not I'd go for hardware fault on the phone's USB port... maybe one of the connector's solder points got ripped or whatever. That's if the port isn't fried altogether... Done anything special between the last time it worked and the first one it didn't?
This may be obvious...but did you restart your computer and hard reset your phone, then try? Im using vista and ive had no problems with any roms...so it just maybe a temporary problem.
Also test this while using the back USB ports, the front ports do not connect the same as the back ports do.
When my new Tilt's screen died an untimely death, I spent all day restoring all my goodies to the replacement Tilt. The next day, went to ActiveSync, and NOTHING! Charged, etc, but no connection. I did all the steps you tried and a few more.
Then, after wasting an entire evening, I found the solution!
Go to Connections>USB to PC, and uncheck 'Enable advanced network". Plug it and let 'er sync.
jlmwrite said:
When my new Tilt's screen died an untimely death, I spent all day restoring all my goodies to the replacement Tilt. The next day, went to ActiveSync, and NOTHING! Charged, etc, but no connection. I did all the steps you tried and a few more.
Then, after wasting an entire evening, I found the solution!
Go to Connections>USB to PC, and uncheck 'Enable advanced network". Plug it and let 'er sync.
Click to expand...
Click to collapse
ahaha yea i thought graff had already checked the software so i didnt bother going into that
I suggest u try to search, there is a search option - type there something like "cannot conect to activesync" - there are milions of threads with this problem, unfortunately I dont know if there will be a solution for u. Just try that out and read.
This happened to me and I had to send my phone in to at&t. I know this probably wasn't what you wanted to hear. They sent me another phone and gave me 10 days from the day I received the new phone to send back the old. I also had the same rom as above I couldn't even flash it via sd card, so I sent it as was and haven't heard anything since. This was two months ago. The problem turned out to be with the mini usb port, it was warped like it got to hot or something. Maybe from using in car for gps I don't know. I hope this helps.
answers and bump
As for searching........always someone has to say it, "why dont you try the search option" - my friend, I am a google allstar and beleive in the forum searching till you can no more then post theory. Now saying that, I am willing to bet the answer to my problem is buried within a post in some thread with some fabric of the entire XDA forum. Finding it though can be harder than removing bubblegum from buckwheats hair.
So I have tried a hard reset for the PDA and the restarted my PC, several times.
...no go
I knew something was wrong when I lost the "ding" every time I hooked up the PDA via USB to my computer.
I had tried the unchecking the Enable Advanced Network before but did again and reset the phone with hopes of glory today. No glory.
I feel I have lost the phone and am ready to move on. Its just so friggen hard since it charges. How can it charge, and not stream data! I fried just the right parts of the mini USB? Blasted! So so so so disappointing because I felt I really had it nailed this time with the perfect radio, ROM, Dialer, programs, software, it all.....well maybe not radio, but my receptions suck all the time anyways and I live in Charlotte NC, a major US city with great AT&T coverage.
Now.....I am still open to any ideas and creative thoughts......but how do I get a the original WM6 Shipped ROM back on the phone? If I cant get any PC to recognize my PC via USB? I am calling in the warranty people today and not speaking of my Dutty, but having a new phone shipped. I just hope not to see a nasty bill come one month or two.
Thanks so far, well done XDA forum friends,
~b
donroja said:
This happened to me and I had to send my phone in to at&t. I know this probably wasn't what you wanted to hear. They sent me another phone and gave me 10 days from the day I received the new phone to send back the old. I also had the same rom as above I couldn't even flash it via sd card, so I sent it as was and haven't heard anything since. This was two months ago. The problem turned out to be with the mini usb port, it was warped like it got to hot or something. Maybe from using in car for gps I don't know. I hope this helps.
Click to expand...
Click to collapse
.....I am curious for you. Two months seems like your in the clear, but I hope not to jinx you. I have done the whole 10 days thing 6 times so far since the original purchase of my 8525 in August of 2007. Wasn't until the 5th time I complained and they offered me the 8925 as a replacement. The first five were all shipped back on time, with original ROM's and valid device malfunctions. Never have I been billed.....yet........
~b
graff40b said:
As for searching........always someone has to say it, "why dont you try the search option" - my friend, I am a google allstar and beleive in the forum searching till you can no more then post theory. Now saying that, I am willing to bet the answer to my problem is buried within a post in some thread with some fabric of the entire XDA forum. Finding it though can be harder than removing bubblegum from buckwheats hair.
So I have tried a hard reset for the PDA and the restarted my PC, several times.
...no go
I knew something was wrong when I lost the "ding" every time I hooked up the PDA via USB to my computer.
I had tried the unchecking the Enable Advanced Network before but did again and reset the phone with hopes of glory today. No glory.
I feel I have lost the phone and am ready to move on. Its just so friggen hard since it charges. How can it charge, and not stream data! I fried just the right parts of the mini USB? Blasted! So so so so disappointing because I felt I really had it nailed this time with the perfect radio, ROM, Dialer, programs, software, it all.....well maybe not radio, but my receptions suck all the time anyways and I live in Charlotte NC, a major US city with great AT&T coverage.
Now.....I am still open to any ideas and creative thoughts......but how do I get a the original WM6 Shipped ROM back on the phone? If I cant get any PC to recognize my PC via USB? I am calling in the warranty people today and not speaking of my Dutty, but having a new phone shipped. I just hope not to see a nasty bill come one month or two.
Thanks so far, well done XDA forum friends,
~b
Click to expand...
Click to collapse
About the flashing original rom- u dont need a activesync for that, u can flash the rom via SDcard.
Mikulec said:
About the flashing original rom- u dont need a activesync for that, u can flash the rom via SDcard.
Click to expand...
Click to collapse
True, but forst I gotta get my mini back in the full size adapter then find a friend with a printer that accepts my scandisk so I can transfer the file over to it. Right now at work trying to save the file to the storage card via wifi. Shall be interesting to see if it works. Didnt on phone, said not enough mem.
Thanks for the suggestion, was so hooked on USB, forgot the other various aspects of the all great HTC.
~b
Related software for Microsoft ActiveSync 4.5
Java Runtime Environment 1.6.0.2 (updated) Java software allows you to run applications called "applets" that are written in the Java programming language. These applets allow
.NET Framework Version 3.0 The Microsoft .NET Framework 3.0 is the new managed code programming model for Windows®. It combines the power of the
DirectX 9.0 Microsoft DirectX is a group of technologies designed to make Windows-based computers an ideal platform for running and displaying applications
ATI Catalyst Drivers The latest Windows XP drivers and software for the Radeon range of ATI graphics cards. Includes: * Catalyst XP Drivers
Thats just some of it, it is more to it. I use xp anyways. You mention reinstalling active sync but have you tried .NET Framework Version 3.0 ? If the device charge via usb I would suspect its software issues on youre pc. Could be bad version of some of the software aswell, try download again making sure its the latest and so on. Good luck
Edit: Why dont you back everything up and reflash from microsd and then see if it will connect. Should solve it.
raiisak said:
Related software for Microsoft ActiveSync 4.5
Java Runtime Environment 1.6.0.2 (updated) Java software allows you to run applications called "applets" that are written in the Java programming language. These applets allow
.NET Framework Version 3.0 The Microsoft .NET Framework 3.0 is the new managed code programming model for Windows®. It combines the power of the
DirectX 9.0 Microsoft DirectX is a group of technologies designed to make Windows-based computers an ideal platform for running and displaying applications
ATI Catalyst Drivers The latest Windows XP drivers and software for the Radeon range of ATI graphics cards. Includes: * Catalyst XP Drivers
Thats just some of it, it is more to it. I use xp anyways. You mention reinstalling active sync but have you tried .NET Framework Version 3.0 ? If the device charge via usb I would suspect its software issues on youre pc. Could be bad version of some of the software aswell, try download again making sure its the latest and so on. Good luck
Edit: Why dont you back everything up and reflash from microsd and then see if it will connect. Should solve it.
Click to expand...
Click to collapse
You are wise my friend. Thank you for the other software, I will try that. Funny thing about the PC, is I have tried three different PC's, all which it used to sync or try to sync with when I would just be charging. I would love to flash via SD card, but first I need the adapter for my computer, or track a friend down with a printer and correct slot. That might be done tonight. I am at work now trying to download the a rapidshare file of a shipped rom, free style, slow style, and prolly not going to work. But hey, its a learning experience.
Either way, my warranty is up in August, so I figure why not get one more nice new fresh 8925 before then. Ordered new one today, comes next week. I will still try and flash back to the shipped rom via SD tonight.
XDA and its members Rock, this is by far the most help I have ever received via my few threads.
~b
graff40b said:
You are wise my friend. Thank you for the other software, I will try that. Funny thing about the PC, is I have tried three different PC's, all which it used to sync or try to sync with when I would just be charging. I would love to flash via SD card, but first I need the adapter for my computer, or track a friend down with a printer and correct slot. That might be done tonight. I am at work now trying to download the a rapidshare file of a shipped rom, free style, slow style, and prolly not going to work. But hey, its a learning experience.
Either way, my warranty is up in August, so I figure why not get one more nice new fresh 8925 before then. Ordered new one today, comes next week. I will still try and flash back to the shipped rom via SD tonight.
XDA and its members Rock, this is by far the most help I have ever received via my few threads.
~b
Click to expand...
Click to collapse
Post your results then.
Everybody knows that xda rulez.
I recently purchased a wizard/mda (tmobile) and have run into major problems trying to unlock and upgrade the device.
This forum is a wealth of information, but I have hit some major problems.
The main problem is being unable to unlock it.I researched various posts around here, and have not been able to get activesync working.I looked at various troubleshooting info from microsoft and around here as well and have not been able to sync the phone with my computer.
I thought that perhaps it may have something to do with the version of xp I have installed, after spending many hours (25+) trying to get it to work.I then tried on another couple of comps and still no luck.
I am beginning to suspect that the phone itself has a technical problem.I seen the workaround for transferring cab files between the comp and the phone, and am hoping that once I have a mini sd card there is some way to upgrade wm5 on the phone.Can I unlock the phone without syncing it, using a different technique?(perhaps bluetooth or ir?)
Looks like I will have to unlock the phone using an unlock code, without syncing to the computer, but I am looking for any and all suggestions that may help out. I even tried attaching files and emailing them to myself, but wm5 doesn't support attachments.
Throw a dog a bone, before he buries this phone!
nachismo said:
I am beginning to suspect that the phone itself has a technical problem.I seen the workaround for transferring cab files between the comp and the phone, and am hoping that once I have a mini sd card there is some way to upgrade wm5 on the phone.Can I unlock the phone without syncing it, using a different technique?(perhaps bluetooth or ir?)
Click to expand...
Click to collapse
Im not an expert into this - all I can give you is couple of general ideas - maybe something you already knew but I'll give it a try
IMHO flashing via BT or IR can't be done or could be very risky.
Did you try hard reset? No change? Did you try hard reset and then skip installing those cabs that are installed automatically after HR?
You could try to download software WM5Storage into your htc, install it, activate and then you can access your phone as USB mass storage device from your PC. I've used it with my SD card only but it looks as it could use internal memory of your phone too. With this you can check if the data can be transfered via the mini USB.
Does your PC see the phone? Saying something like "installing new device drivers" or something like that. Check device manager.
Can you charge the battery in your phone from usb?
Btw I can't remember exact process of unlocking/flashing - is it really necessary to have synced the device before unlocking/flashing?
Following up.....
Thanks for the ideas, MuF123.
Some time has gone by.....
I tried the hard reset, and that didn't make a difference.
I was able to sync via bluetooth using a friends laptop, but was unable to sync via usb on the same computer or on my own.
I installed WM5storage and my computer doesn't see it as a mass storage device, even though it charges the phone via usb.
I am looking at this:internal error 2356 activesync.cab that comes up when I try repairing activesync, but it was a dead end the first time around.(maybe the answer is deeper there somewhere?)
I really like the phone alot, i think i will try picking up some external memory, and see if i can't use one of those unlocking services to get it up and working with a local cellular provider.
Thanks,
Nacho