Related
I've stuggled on with the unreliable ROM that my PDA2K came with because I have been unsuccessful at upgrading using my Mac and Virtual PC 7 (Windows XP).
I don't have access to a PC, and wondered whether anyone could give me any guidance.
Is it possible to upgrade the rom directly from the device itself, or are there ROM installers for other Blue Angel phones that would work via Virtual PC?
Any help very welcome - but please give as much detail as possible if telling me to install or change things manually. I've read posts about 'extended roms' and taking bits from here and there and I've no idea what this is about.
hello fellow mac user
What exactly is the problem?
ANy error messages? are you trying via BT or USB ?
HI,
When I tried to upgrade previously the PDA2K's screen showed USB but I got an error (sorry I cant remember the number code; radio upgrade error or something).
Recently, and I don't know what's changed, I just get Error 101: Connection Failure. When I try to run the upgrade the device does a soft reset at the beginning, then there is a long pause then I get the error. It seemed to manage more previously (may be that was an earlier from upgrade, but it never worked anyway!).
Have you been successful from your Mac?
Just looked back at my old posts on the howard forums, and discovered it was Error 114 I was getting previously (with the first ROM upgrade). I presume I'm getting the 101 connection error now that I'm trying to use the latest ROM upgrade.
One thing I'm about to try myself is to switch off both the windows and Mac OS X firewalls just in case they are interfering with the process.
Just to be more specific:
It comes up with the info from the phone and the upgrade, then I click next to start the upgrade; the device does a soft reset then repeatedly the device says it's connecting to host, the PC says reading info from device; then after a while I get error 101. As soon as the ROM upgrade installer quits, then Activesync reconnects the device (as guest).
Are the ERK files supposed to be run from the device? Will this help me? I've just downloaded one, and downloaded a thing called WinRAR but the resulting files say they aren't Win32 applications; and most of the contents of the folder are .rar files even after I extracted it. Wierd. Please can someone help!
Oh well, it's getting late here in the UK, I will just have to try again another time. Going to have to reinstall everything again now (as I have after every failed attempted at a ROM upgrade over the past few months). This is the last time I buy anything with a Microsoft operating system!!!!
Can anyone help?
Anyone?
Hi
Sorry but I don't think I am going to be much help.
I too am a Mac user with VPC and happily ActiveSync every day using VPC 7.01.
HOWEVER I would never try and use VPC to do something as basic as a ROM upgrade.
I managed to borrow a PC from someone at work and used that for the upgrade. I went on the basis that a ROM upgrade is so basic to the device and would likely need real PC hardware that I would not risk it.
Is there no colleagure, friend or workmate that can help you out?
Regards.
Robin
Hi,
Thanks for replying. I had bought Virtual PC because I just couldn't find any other way of getting a lot of the software onto the iMate. Having made this investment I hoped it would work with the ROM upgrade too.
I did manage to get use of a PC yesterday, but unfortunately it didn't work either. The PDA2K reset itself at the start, then after a delay the updater gave error 101 connection error, exactly the same as with Virtual PC.
Later, I managed to get someone really helpful at i-mate on the live support (and for once it didn't time out) and I went through a few things, including pressing power-reset-record (so that USB is displpayed) and trying from there. It still didn't work, I got Error 114 after the updater sat at 0% for several minutes.
This leads me to the exact reason I didn't want to have to rely on someone elses PC: having access to it for a limited time I tried repeatedly the ROM upgrade yesterday with no success. Later, at home, I got help from iMate and some ideas that will be trying again with a PC, but now I've got to wait for another opportunity to use a PC. What concerns me, is if I ever get a major problem the phone may be unusable until I next get access to a PC. Worse still - if the phone locks up when I'm using the PC and I don't have the time/knowledge to resolve it, I could end up with a non-functioning phone. It's much easier to tinker with these things in the comfort of my own home when time is less of an issue.
I just received my K700i yesterday. I decided enough was enough. I'm going to sell the PDA2K as soon as I've got the ROM sorted out. I really did try to get on with this device but it's caused me more grief than I have ever had with an electronic device before. I learned a lot, setting up GPRS, wifi, bluetooth, found all sorts of useful software, used VNC to control my Mac remotely etc etc, but at the end of the day I just couldn't rely on it. Some days I could get email, some days I couldn't. Some days people would receive the SMS I sent, some days they didn't. Sometimes the people I was calling could hear me, sometimes they couldn't. Sometimes the phone would stay switched off, sometimes it turned itself on and drained the battery. The list of problems I had with this phone were endless. Hence why I was trying to get the ROM upgraded.
I understand your concenr and problem.
I actually have the latest ROM installed on mine and I STILL get someof the problems you describe.
Only Microsoft could get away with writing such a crap operating system to run a phone.
And i-mates issues just compund the Windows issues.
Good luck.
Robin
ive never bothered even trying to run activesync thru vpc. It was a bit hit and miss on my XDA1 so as soon as my xda2i arrived i just bought missing sync from mark space. Hassle free syncing and installing, plus the ppc gets mounted like a mass storage device too.
Trouble is I use Outlook at work and need to sync it to my PDA.
I cannot even use Entourage as we are a) running to old a version of Outlook server and b) Missing Sync will not sync with Entourage.
I am stuffed both ways.
Robin
Me again!
Just thought I'd let everyone know that I did indeed succeed first time on a PC today (having pressed power-reset-record to go into bootloader mode first).
So, as everyone told me, it was necessary to use a PC, and Virtual PC on a Mac just wont work.
I'm getting on ok with my K700i, although the email seems a bit limiting (doesn't seem to have message titles displayed, and a short limit to the length of the email).
My plan: use the K700i for a few weeks and see how I get on, then perhaps I might try the newly upgraded PDA2K for a few weeks, and see which I prefer.
The other complicating factor is that the SIM free Treo 650 has just become available, but I'm going to hold fire on that for now. Perhaps if I'm not happy with either the K700i or the upgraded PDA2K then I might consider it...
I cannot get ActiveSync to detect my phone.
I get the XP message "USB Device Not Recognized" when I plug in the phone.
I have checked my USB drivers. They are more up to date (2004) than the ones listed on the Microsoft support page listed in the ActiveSync readme.doc
I am running ActiveSync 4.5 on a Windows XP laptop
Windows Mobile 6 CE OS 5.2.1620 (Build 18125.0.4.2)
on an Orange Tytn II (ok, I will flash the rom once I have a working ActiveSync!)
I have tried switching off the firewall on the laptop - no luck.
Changing the in "Enable advanced network functionality" through the 'USB to PC' connections makes no difference.
In the Get Connected Window USB is listed as having status "USB is available" after clicking Next on Checking COM ports (it takes a while).
I have uninstalled and reinstalled ActiveSync 4.5 (obtained from both the CD and the Microsoft web site).
I have done the usual cycle of switching everything off and rebooting (several times).
I have tried all four of the USB ports on my ASUS A6000.
New suggestions for things to try most welcome.
I did have the same problem myself when I first got mine. I also tried turning firewalls off etc. The only method that seemed to regularly work was to reset the kaiser and ultimately a hard reset
i had a similar problem and i found it was because i still had the nokia phone sync software on my pc too .. removing it sorted the problem
Soft reset the device, reboot the pc.
If USB syncing doesnt work, try bluetooth.
Works for approx 30 secs after reboot
I think I have a faulty phone.
ActiveSync works for about 30 seconds after a reboot, as does gps tracking, and then the connection is lost (and gps fixes on the last tracked location). I have tried soft/hard resets, all to no avail.
Unfortunately I bought the phone in London and I will have to wait until I am next in London to take it back to the Orange shop for a replacement :-(
I am having the same issue but I cant get activesync to work at all
I could recognise the kaiser on one PC but not on another, messed around and go it working then it stoped , all along it was mt Firewall, disabled the fire wall never had any more problems with activesync. that was my issue might be something for you to look into
derek-farn said:
I think I have a faulty phone.
ActiveSync works for about 30 seconds after a reboot, as does gps tracking, and then the connection is lost (and gps fixes on the last tracked location). I have tried soft/hard resets, all to no avail.
Unfortunately I bought the phone in London and I will have to wait until I am next in London to take it back to the Orange shop for a replacement :-(
Click to expand...
Click to collapse
I think your phone is ok. ActiveSync always gives all kind of problems.
I sync my kaiser on my desktop, my laptop and at work. For some reason, my desktop had exactly the same problem than yours. I tried everything!
Finally I found something that made it work much better. Go to Settings->Connections->USB to PC and uncheck the option 'Enable advanced network functionality'
After that, I still get some random disconnects, but only happens like every 3 or 4 days.
Hope it helps.
I had this same problem (device not being recognised) but fixed it by connecting the USB directly to the PC not via a USB hub. This makes me think that the TyTN II requires the maximum current from its USB connector to work; a hub reduces the available power; some PC connections may not have enough and this could account for the problems some users are experiencing perhaps??
jmaynard said:
I had this same problem (device not being recognised) but fixed it by connecting the USB directly to the PC not via a USB hub. This makes me think that the TyTN II requires the maximum current from its USB connector to work; a hub reduces the available power; some PC connections may not have enough and this could account for the problems some users are experiencing perhaps??
Click to expand...
Click to collapse
i tried unchecki the box for usb-to pc and i disabled the firewall and still had no luck. ill y a different computer and report back
jaygriggs said:
i tried unchecki the box for usb-to pc and i disabled the firewall and still had no luck. ill y a different computer and report back
Click to expand...
Click to collapse
Have you fixed the problem yet? I'm having the same problem and tried everything suggested here.
I tried it on 2 computers with Vista. First it worked, but since my laptop with XP isn't reacting on my Kaiser anymore, Vista can't find the Kaiser too. Only a friend of mine, who has a Trinity, can use activesync. Is flashing a good fix?
Found solution to my problem
I have finally found a solution that works for me (having tried everything that everybody has suggested, plus more).
I found that if you have a password enabled (ie, something that has to be typed when the phone is first switched on; available via Settings -> Personal -> Lock) and a firewall running, then an ActiveSync connection fails for no obvious reason.
Disable the firewall and your phone will prompt you for the password after which ActiveSync works.
Disable the password and there is no prompt with/without firewall and ActiveSync works.
In my case I also had to untick the 'enable advanced network functionality'.
i am starting to thing there maybe a big problems here , i have the same thing and nothing has helped,,diffant pc`s i have hard reset the phone, unticked Enable advanced network. and still nothing.
The problem that I found was the notifications queue for ActiveSync on my phone had been corrupted.
I downloaded memmaid and used the "recreate Activesync" under the database menu.
Unplug from the USB, run MemMaid and on the "JumpTo" softkey go to "Databases\Notification queue". Tap on the arrow to the right of "Add..." and tap "Recreate ActiveSync". Soft reset your phone wait 60 seconds after everything is loaded and plug the USB cable in. You should be good to go.
This is a known problem with ActiveSync and happens on a plethora of WMD's, not just the Kaiser or HTC. I used to have the same problem on an iPaq PPC. Microsoft's official answer to this was it was the OEM's fault for not following strict rules on implementing properly coded USB drivers.
well BulldogXTRM you got my hopes up there,,,,
but it did not work for me,
lodger said:
well BulldogXTRM you got my hopes up there,,,,
but it did not work for me,
Click to expand...
Click to collapse
Sorry partner, I guess it's not always the same problem.
I've been using my AT&T Tilt for nearly a month without any problems, but yesterday for reasons I cannot determine, my phone suddenly stopped being recognized by any version of Windows XP or Windows Vista. I tired Windows XP SP2 in a virtual machine on my Mac, I tried it on my wife's Windows Vista machine, and I tried it on my children's Windows Vista machine and I received the same error each and every time.
No matter what machine I plugged it into, I would immediately get a "USB Device Not Recognized" error and neither ActiveSync on Windows XP nor WMDC on Windows Vista would initiate a sync.
I've hard reset my phone multiple times, I've uninstalled and reinstalled both ActiveSync and WMDC, I've even flashed to a different OS on my phone (using my MicroSD card) and nothing has worked.
I'm beginning to wonder if maybe the USB connection on the phone may have failed. I've been contemplating sending it back to AT&T since I had a malfunctioning pixel in the middle of the screen, but with the recent problems I'm starting to lean more towards returning it and less towards living with the pixel issue.
Anyone have any ideas on what might be causing the USB problem?
Just a quick update, when I arrived at work today, I attempted to sync with my work computer (Windows Vista Business) and I had no trouble at all. I'm going to take home the cable that I have here (which came with the BlackBerry I use for work) and see if that makes any difference with my home computers.
wow
I can confirm this as well. I have the Tilt and I used a blackberry cable from my job and it synced up flawlessly. before i was getting that usb not recognized as well.
I'm having the exact same problem now.. it worked fine for 4 months and now.. it just says usb not recognized. Please post the results if your blackberry cable. thanks
I just tried a brand new usb cable and it still didn't work for me
I have the same problem but i've got a solution for this and it's very simple.
For someother reason ActiveSync will boot on the background of your device even when you close it, it will boot up within 10 min or less.
This is the thing you need to do:
Before you plugin your usb cable to sync......
Run taskmanager and close activesync. When you are sure that this application is not running then plugin your USB cable.
It worked for me!
sstolk said:
I have the same problem but i've got a solution for this and it's very simple.
For someother reason ActiveSync will boot on the background of your device even when you close it, it will boot up within 10 min or less.
This is the thing you need to do:
Before you plugin your usb cable to sync......
Run taskmanager and close activesync. When you are sure that this application is not running then plugin your USB cable.
It worked for me!
Click to expand...
Click to collapse
I've tried that, didn't work
I had this exact same problem happen to me at the end of November - I was using WMDC 6.1 for months then all of a sudden I could not connect (same error message you described). I went back and looked through the MS Windows updates and identified a NVIDEA driver update had caused my problem. Used system restore to roll it back and then everything worked fine.
ellergek said:
I had this exact same problem happen to me at the end of November - I was using WMDC 6.1 for months then all of a sudden I could not connect (same error message you described). I went back and looked through the MS Windows updates and identified a NVIDEA driver update had caused my problem. Used system restore to roll it back and then everything worked fine.
Click to expand...
Click to collapse
How do I look back at the MS Windows updates? and this will automatically tell you whats wrong?
DVS_WiNdz said:
How do I look back at the MS Windows updates? and this will automatically tell you whats wrong?
Click to expand...
Click to collapse
ya..i bought my girlfriend the HTC Touchdual and has the same problem as well. She can't seem to sync with her Win XP and is only her 2nd time trying to sync and it failed already. In between, I don't think there was any internet connection to update anything.
Please help!
(Sorry to borrow this thread to solve the same problem but on another device btw, I own a Kaiser myself but currently didn't face any problem yet..touch wood!!)
Dwimmerlaik, did you have any luck fixing the problem?
Solved my USB Connection issue in Vista
After trying everything I could find on the net to solve my inability for Vista to stay connected with my HTC Kaiser (ATT TILT), I found the problem exists with the MicroSD card. No matter what, Vista would connect then disconnect my phone after a few seconds. After weeks of searching I finally just decided to take out my 2Gb MicroSD card.....and now Vista maintain connections and I am finally able to sync via WMDC.
Spread the Word!!!! Take out the MicroSD.
jbenado said:
After trying everything I could find on the net to solve my inability for Vista to stay connected with my HTC Kaiser (ATT TILT), I found the problem exists with the MicroSD card. No matter what, Vista would connect then disconnect my phone after a few seconds. After weeks of searching I finally just decided to take out my 2Gb MicroSD card.....and now Vista maintain connections and I am finally able to sync via WMDC.
Spread the Word!!!! Take out the MicroSD.
Click to expand...
Click to collapse
too bad I'm not using Vista..
Anyone else have this problem and solved it?
-Try to use the USBs at the back of your PC(not on the front of the case).
-Try to buy another cable(That SHOULD BE an USB2.0 HighSpeed certified shielded cable. That costs something about $6 ).
nsa666 said:
-Try to use the USBs at the back of your PC(not on the front of the case).
-Try to buy another cable(That SHOULD BE an USB2.0 HighSpeed certified shielded cable. That costs something about $6 ).
Click to expand...
Click to collapse
I've tried the back USB ports.. don't work.. and I've tried numerous USB2.0 cables.. it just keeps saying USB device not recognized.
i tried uninstalling the activesync..
then. install it again..
voila, my wizard got connected..
by the way, im using the blackdiamond rom
layzien0n0n said:
i tried uninstalling the activesync..
then. install it again..
voila, my wizard got connected..
by the way, im using the blackdiamond rom
Click to expand...
Click to collapse
Didn't work for me either
I've tried doing that multiple times..
Go to phone, menu, options, time zones tab, uncheck the Auto change time zone & clock.
This is a known bug in the firmware that causes A/S to automatically start & then sometimes it tries to start a second sessions of A/S when you plug in to your PC. Give it a try, have you ever noticed that A/S is running in task manager even though you're not connected or just reset? Just one thought.
GSLEON3 said:
Go to phone, menu, options, time zones tab, uncheck the Auto change time zone & clock.
This is a known bug in the firmware that causes A/S to automatically start & then sometimes it tries to start a second sessions of A/S when you plug in to your PC. Give it a try, have you ever noticed that A/S is running in task manager even though you're not connected or just reset? Just one thought.
Click to expand...
Click to collapse
Just tried it.. didn't work..
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
ActiveSync
Moved message
Needs a little bump here
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Sounds like something has changed on your PC, perhaps via a Windows Update. Have you checked to see if your firewall is the culprit?
You may also want to do a clean uninstall and then reinstall Activeswync 4.5 and create a new partnership with your device.
You can also try restoring your PC back to a date that you were able to use Activesync....
This happens to me rather frequently (I am looking for an ActiveSync replacement because of it).
However, I fix it by either soft reset of the device, PC, or sometimes both. If that doesn't work, you need to delete the partnership with the PC and reconnect.
RK
...any solutions yet?
I just got my kaiser 3 weeks ago after using a wizard for almost 2 years. what a great phone the wizard was... I kinda miss using it! Anyhow, i just experienced the sudden activesync failure. I now get random activesync openings on my kaiser with the message "To synchronize your device with a desktop computer... yada yada".
I have already setup a bogus server and set the scheduling to manual.
I have compared the wizard registry to the kaiser registry by searching every instance of 'activesync' and couldnt find anything.
I also deleted all instances of activesync in the notification queue and had memmaid rebuild it.
The device will connect to activesync but pops an error message that it could not synchronize and goes into a guest account setting. So for now I am having to use pimbackup to backup my data on the kaiser, bluetooth it to my wizard, then sync the wizard with my laptop to get the data into outlook. I am considering a hard reset but kind of want to wait until the at&t 6.1 official Rom comes out. I am also considering Chapura Pocketmirror Professional which worked well on an old Ipaq i had (wm2k3) that had sync issues. I also want to get this resolved so i can practice loading a new rom on the wizard. So....
Anyone have a fix yet? I hope so!!!
Oh, and for reference (to answer questions from other threads), my kaiser battery drains 4 to 5 times faster than the wizard in side by side use, and the kaiser definitely does not have a transflective screen while the wizard does... bummer. but the kaiser is tremednously faster!
1. Disconnect the device from your computer.
2. Try going to your device and select:
start->settings->connections->USB to PC.
3. Uncheck "enable advanced network functionality"
4. Reconnect the device.
Active Sync....
Hi,
You can try "PocketMirror® Professional 2.2.4 for Windows Mobile", its a pretty good syncronization tool, but it costs a few bucks...
I've been using the trial version of PocketMirror and must say its pretty good with my TYTN 2.
Regs,
The Reaper.
... my thoughts exactly
yeah, i tried the usb to pc option as well. even downloaded a cab from another thread that allowed me to choose rndis or usb mode. neither worked. I will probably use pocketmirror pro as well...
Hi, I just flashed a new ROM on my Orbit that works brilliantly, no issues at all, apart from the fact that the computer now doesn't see the device at all. Not even the blo-blong sound when you connect any USB device. The only thing I get connecting the cable is charging the battery. And if I start Active Sync on my Orbit I get the same message as mystic_nacho:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC"
I just tried an hard reset to try to fix the issue - no success..
Before flashing everything was fine..
Btw, my wife Diamond doesn't connect either, and it never did it: something related to the TouchFlo thing?
Any idea?
The ROM I flashed is
gullums TouchFlo2D beta 4
update
I found the Diamond 'Getting started disc' and installed the Windows Mobile resources tool...
The disc I have from the Orbit box is for Windows Mobile 5, I guess it's not worth to find it out and try...
Nothing changed, anyway.
update 2
Yesterday night out of the blue - while the Orbit was still connected to the pc - ActiveSync started to work... F. knows....
i had the same problem - sync was working fine and then stopped. what worked for me was to go to USB to PC under settings and uncheck "enable faster data syncronization".
hi,
i also had sync. problems in the past.
searched for months.. since i figured out that some registry entries on my PC where missing!
imported the mayor setting from my brothers PC and TADAAAAAA. problem solved.
search my threads and maybe you 've luck with my soloution!
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Have you recently used a memory cleaning Application like memmaid, Clear Temp, or SKTools? You might have cleaned out some important notification files, like repllog,exe that is used for activesync.
I had the same thing happen to me when I first used these cleaners. I had to do a hard reset on the phone to make it work again found out about the remedies listed below after the reset.
I have heard others were successful repairing these notification Queue's with MemMaid. You can hold your stylus on the repllog,exe notification, and a popup up will appear, asking you to Recreate ActiveSync, or rebuild notification Queue. I don't know if this feature is available in Clear Temp, or SK tools.
I've also heard of restoring activesync by unchecking all of the folders, syncing, and then adding each folder back to the list, one by one, until all is restored.
I too have just developed the same problem.
I have 2 TYTN II' one will sync fine the other wont.
It all went horribly wrong after I tried to install Wisbar and an Ipod theme, after I uninstalled it, cos it didn't work I found I could no longer sync with USB to PC and the sync option is greyed out on my phone. The phone will charge with some of my usb cables, but now even seems fussy about which cable will charge and some now won't.
I am given to wondering whether the usb connection on my Phone is the problem...everything else seems to be working fine.
I have even installed different ROMS via the memory card still the problem persists.
I would love someone to come up with a fix
**UPDATE**
Well I now have got it working, in my case I was right, the usb connection on the phone was to blame. I took it to a mobile repair shop, I told the guy that I thought it was faulty he took one look at it and said that I had a bent pin, he got a little tool out and teased it back into position, sure enough when I got home it worked fine so now I am able to sync again. Not sure how long it will last though.
**Update 2**
Failed again, at least I know what's wrong now.
Hi I have a fault with Activesync (Vista), I connect the USB cable to the PC and to the handset, the power indicator tells me that it's charging yet, the device is not syncronizing.
I have reset both the PC and the Device with no avail.
It was working OK about a week ago now nothing, I have not altered any settings and im running HYPERDRAGON III with radio 1.65.24.36 any suggestions???
You are required to search before posting, and seeing as this is a common problem I don't think you have met the requirements.
This is sort of an "advanced" users forum. If you don't search first, you won't get much help on here. Look at the top right, see the "search" click it, type in something and it should help you out. This is a very common problem, asked and answered many times.
I'll take a moment and try to help. It's just as easy as telling you to search.
I found a thread or two (the search is really time consuming. I don't find it to work all that great...find too much stuff unrealted to what you need). And they didn't help.
What I am only just not realizing is that it seems that the firewall with the Virus software may be interferring. If I turn off the firewall long enough to synch, it works.
What a pain, but that's what's working for me.
Never had this problem on XP.
Chillin like a Dylan
Thanks for the support and advice. I have followed instructions yet problem still pesists.
I have disabled firewall and Anti-Virus to no avail. When connecting the USB cable usually I hear a notification that the device is attached but this doesn't happen. Very puzzling!
Awesome problem solved. Reinstalled Wdinows Mobile Centre and all works ok now. Im not sure if this has any similarity but I know there was a Vista update the other day which may of interfered with the device drivers. Not sure.
But all is working well!
It'll be interesting to see if it keeps working well. INstalling WMDC was my first attempt at fixing. It appeared to fix, but the next time I went to synch, it didn't work again.
I spent the next 2-3 weeks reinstalling WMDC every tiem I wanted to sync, and it would sync.
I remain only able to do it if I disable my firewall (or reinstall WDMC, which I'm tired of). Of course, that could be vendor specific problem. I am using Trend Micro on my PC.
Nope issue still reminas, I'm pretty sure its the connectors in the Mini USB, on reading other forums I have discovered that the Mini USB port has been known to malfunction. This is due to the design of the port and the fact the cables shipped with the device are standard and not customised for the device.
I just wiggle around the socket a few times and hey it works (fingers crossed). Might justbrick it and order a replacment that will work if I can't sync any more.
I have also noticed that you have to wait after a soft reset for all of the programs to fully load. ESPECIALLY if you use BB Connect.
I believe this to be the true reason why rebooting a PC sometimes helps... it gives the Kaiser enough time to fully start.
instead of reinstalling WMDC, just make sure the service required to connect your device to your computer is running.
I believe its called windows mobile based connectivity. You wont be able to connect with that on manual. Switch it to automatic, as it sometimes likes to switch back to manual especially after a ROM flash.