I cannot get ActiveSync to detect my phone.
I get the XP message "USB Device Not Recognized" when I plug in the phone.
I have checked my USB drivers. They are more up to date (2004) than the ones listed on the Microsoft support page listed in the ActiveSync readme.doc
I am running ActiveSync 4.5 on a Windows XP laptop
Windows Mobile 6 CE OS 5.2.1620 (Build 18125.0.4.2)
on an Orange Tytn II (ok, I will flash the rom once I have a working ActiveSync!)
I have tried switching off the firewall on the laptop - no luck.
Changing the in "Enable advanced network functionality" through the 'USB to PC' connections makes no difference.
In the Get Connected Window USB is listed as having status "USB is available" after clicking Next on Checking COM ports (it takes a while).
I have uninstalled and reinstalled ActiveSync 4.5 (obtained from both the CD and the Microsoft web site).
I have done the usual cycle of switching everything off and rebooting (several times).
I have tried all four of the USB ports on my ASUS A6000.
New suggestions for things to try most welcome.
I did have the same problem myself when I first got mine. I also tried turning firewalls off etc. The only method that seemed to regularly work was to reset the kaiser and ultimately a hard reset
i had a similar problem and i found it was because i still had the nokia phone sync software on my pc too .. removing it sorted the problem
Soft reset the device, reboot the pc.
If USB syncing doesnt work, try bluetooth.
Works for approx 30 secs after reboot
I think I have a faulty phone.
ActiveSync works for about 30 seconds after a reboot, as does gps tracking, and then the connection is lost (and gps fixes on the last tracked location). I have tried soft/hard resets, all to no avail.
Unfortunately I bought the phone in London and I will have to wait until I am next in London to take it back to the Orange shop for a replacement :-(
I am having the same issue but I cant get activesync to work at all
I could recognise the kaiser on one PC but not on another, messed around and go it working then it stoped , all along it was mt Firewall, disabled the fire wall never had any more problems with activesync. that was my issue might be something for you to look into
derek-farn said:
I think I have a faulty phone.
ActiveSync works for about 30 seconds after a reboot, as does gps tracking, and then the connection is lost (and gps fixes on the last tracked location). I have tried soft/hard resets, all to no avail.
Unfortunately I bought the phone in London and I will have to wait until I am next in London to take it back to the Orange shop for a replacement :-(
Click to expand...
Click to collapse
I think your phone is ok. ActiveSync always gives all kind of problems.
I sync my kaiser on my desktop, my laptop and at work. For some reason, my desktop had exactly the same problem than yours. I tried everything!
Finally I found something that made it work much better. Go to Settings->Connections->USB to PC and uncheck the option 'Enable advanced network functionality'
After that, I still get some random disconnects, but only happens like every 3 or 4 days.
Hope it helps.
I had this same problem (device not being recognised) but fixed it by connecting the USB directly to the PC not via a USB hub. This makes me think that the TyTN II requires the maximum current from its USB connector to work; a hub reduces the available power; some PC connections may not have enough and this could account for the problems some users are experiencing perhaps??
jmaynard said:
I had this same problem (device not being recognised) but fixed it by connecting the USB directly to the PC not via a USB hub. This makes me think that the TyTN II requires the maximum current from its USB connector to work; a hub reduces the available power; some PC connections may not have enough and this could account for the problems some users are experiencing perhaps??
Click to expand...
Click to collapse
i tried unchecki the box for usb-to pc and i disabled the firewall and still had no luck. ill y a different computer and report back
jaygriggs said:
i tried unchecki the box for usb-to pc and i disabled the firewall and still had no luck. ill y a different computer and report back
Click to expand...
Click to collapse
Have you fixed the problem yet? I'm having the same problem and tried everything suggested here.
I tried it on 2 computers with Vista. First it worked, but since my laptop with XP isn't reacting on my Kaiser anymore, Vista can't find the Kaiser too. Only a friend of mine, who has a Trinity, can use activesync. Is flashing a good fix?
Found solution to my problem
I have finally found a solution that works for me (having tried everything that everybody has suggested, plus more).
I found that if you have a password enabled (ie, something that has to be typed when the phone is first switched on; available via Settings -> Personal -> Lock) and a firewall running, then an ActiveSync connection fails for no obvious reason.
Disable the firewall and your phone will prompt you for the password after which ActiveSync works.
Disable the password and there is no prompt with/without firewall and ActiveSync works.
In my case I also had to untick the 'enable advanced network functionality'.
i am starting to thing there maybe a big problems here , i have the same thing and nothing has helped,,diffant pc`s i have hard reset the phone, unticked Enable advanced network. and still nothing.
The problem that I found was the notifications queue for ActiveSync on my phone had been corrupted.
I downloaded memmaid and used the "recreate Activesync" under the database menu.
Unplug from the USB, run MemMaid and on the "JumpTo" softkey go to "Databases\Notification queue". Tap on the arrow to the right of "Add..." and tap "Recreate ActiveSync". Soft reset your phone wait 60 seconds after everything is loaded and plug the USB cable in. You should be good to go.
This is a known problem with ActiveSync and happens on a plethora of WMD's, not just the Kaiser or HTC. I used to have the same problem on an iPaq PPC. Microsoft's official answer to this was it was the OEM's fault for not following strict rules on implementing properly coded USB drivers.
well BulldogXTRM you got my hopes up there,,,,
but it did not work for me,
lodger said:
well BulldogXTRM you got my hopes up there,,,,
but it did not work for me,
Click to expand...
Click to collapse
Sorry partner, I guess it's not always the same problem.
Related
I've been using my AT&T Tilt for nearly a month without any problems, but yesterday for reasons I cannot determine, my phone suddenly stopped being recognized by any version of Windows XP or Windows Vista. I tired Windows XP SP2 in a virtual machine on my Mac, I tried it on my wife's Windows Vista machine, and I tried it on my children's Windows Vista machine and I received the same error each and every time.
No matter what machine I plugged it into, I would immediately get a "USB Device Not Recognized" error and neither ActiveSync on Windows XP nor WMDC on Windows Vista would initiate a sync.
I've hard reset my phone multiple times, I've uninstalled and reinstalled both ActiveSync and WMDC, I've even flashed to a different OS on my phone (using my MicroSD card) and nothing has worked.
I'm beginning to wonder if maybe the USB connection on the phone may have failed. I've been contemplating sending it back to AT&T since I had a malfunctioning pixel in the middle of the screen, but with the recent problems I'm starting to lean more towards returning it and less towards living with the pixel issue.
Anyone have any ideas on what might be causing the USB problem?
Just a quick update, when I arrived at work today, I attempted to sync with my work computer (Windows Vista Business) and I had no trouble at all. I'm going to take home the cable that I have here (which came with the BlackBerry I use for work) and see if that makes any difference with my home computers.
wow
I can confirm this as well. I have the Tilt and I used a blackberry cable from my job and it synced up flawlessly. before i was getting that usb not recognized as well.
I'm having the exact same problem now.. it worked fine for 4 months and now.. it just says usb not recognized. Please post the results if your blackberry cable. thanks
I just tried a brand new usb cable and it still didn't work for me
I have the same problem but i've got a solution for this and it's very simple.
For someother reason ActiveSync will boot on the background of your device even when you close it, it will boot up within 10 min or less.
This is the thing you need to do:
Before you plugin your usb cable to sync......
Run taskmanager and close activesync. When you are sure that this application is not running then plugin your USB cable.
It worked for me!
sstolk said:
I have the same problem but i've got a solution for this and it's very simple.
For someother reason ActiveSync will boot on the background of your device even when you close it, it will boot up within 10 min or less.
This is the thing you need to do:
Before you plugin your usb cable to sync......
Run taskmanager and close activesync. When you are sure that this application is not running then plugin your USB cable.
It worked for me!
Click to expand...
Click to collapse
I've tried that, didn't work
I had this exact same problem happen to me at the end of November - I was using WMDC 6.1 for months then all of a sudden I could not connect (same error message you described). I went back and looked through the MS Windows updates and identified a NVIDEA driver update had caused my problem. Used system restore to roll it back and then everything worked fine.
ellergek said:
I had this exact same problem happen to me at the end of November - I was using WMDC 6.1 for months then all of a sudden I could not connect (same error message you described). I went back and looked through the MS Windows updates and identified a NVIDEA driver update had caused my problem. Used system restore to roll it back and then everything worked fine.
Click to expand...
Click to collapse
How do I look back at the MS Windows updates? and this will automatically tell you whats wrong?
DVS_WiNdz said:
How do I look back at the MS Windows updates? and this will automatically tell you whats wrong?
Click to expand...
Click to collapse
ya..i bought my girlfriend the HTC Touchdual and has the same problem as well. She can't seem to sync with her Win XP and is only her 2nd time trying to sync and it failed already. In between, I don't think there was any internet connection to update anything.
Please help!
(Sorry to borrow this thread to solve the same problem but on another device btw, I own a Kaiser myself but currently didn't face any problem yet..touch wood!!)
Dwimmerlaik, did you have any luck fixing the problem?
Solved my USB Connection issue in Vista
After trying everything I could find on the net to solve my inability for Vista to stay connected with my HTC Kaiser (ATT TILT), I found the problem exists with the MicroSD card. No matter what, Vista would connect then disconnect my phone after a few seconds. After weeks of searching I finally just decided to take out my 2Gb MicroSD card.....and now Vista maintain connections and I am finally able to sync via WMDC.
Spread the Word!!!! Take out the MicroSD.
jbenado said:
After trying everything I could find on the net to solve my inability for Vista to stay connected with my HTC Kaiser (ATT TILT), I found the problem exists with the MicroSD card. No matter what, Vista would connect then disconnect my phone after a few seconds. After weeks of searching I finally just decided to take out my 2Gb MicroSD card.....and now Vista maintain connections and I am finally able to sync via WMDC.
Spread the Word!!!! Take out the MicroSD.
Click to expand...
Click to collapse
too bad I'm not using Vista..
Anyone else have this problem and solved it?
-Try to use the USBs at the back of your PC(not on the front of the case).
-Try to buy another cable(That SHOULD BE an USB2.0 HighSpeed certified shielded cable. That costs something about $6 ).
nsa666 said:
-Try to use the USBs at the back of your PC(not on the front of the case).
-Try to buy another cable(That SHOULD BE an USB2.0 HighSpeed certified shielded cable. That costs something about $6 ).
Click to expand...
Click to collapse
I've tried the back USB ports.. don't work.. and I've tried numerous USB2.0 cables.. it just keeps saying USB device not recognized.
i tried uninstalling the activesync..
then. install it again..
voila, my wizard got connected..
by the way, im using the blackdiamond rom
layzien0n0n said:
i tried uninstalling the activesync..
then. install it again..
voila, my wizard got connected..
by the way, im using the blackdiamond rom
Click to expand...
Click to collapse
Didn't work for me either
I've tried doing that multiple times..
Go to phone, menu, options, time zones tab, uncheck the Auto change time zone & clock.
This is a known bug in the firmware that causes A/S to automatically start & then sometimes it tries to start a second sessions of A/S when you plug in to your PC. Give it a try, have you ever noticed that A/S is running in task manager even though you're not connected or just reset? Just one thought.
GSLEON3 said:
Go to phone, menu, options, time zones tab, uncheck the Auto change time zone & clock.
This is a known bug in the firmware that causes A/S to automatically start & then sometimes it tries to start a second sessions of A/S when you plug in to your PC. Give it a try, have you ever noticed that A/S is running in task manager even though you're not connected or just reset? Just one thought.
Click to expand...
Click to collapse
Just tried it.. didn't work..
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
ActiveSync
Moved message
Needs a little bump here
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Sounds like something has changed on your PC, perhaps via a Windows Update. Have you checked to see if your firewall is the culprit?
You may also want to do a clean uninstall and then reinstall Activeswync 4.5 and create a new partnership with your device.
You can also try restoring your PC back to a date that you were able to use Activesync....
This happens to me rather frequently (I am looking for an ActiveSync replacement because of it).
However, I fix it by either soft reset of the device, PC, or sometimes both. If that doesn't work, you need to delete the partnership with the PC and reconnect.
RK
...any solutions yet?
I just got my kaiser 3 weeks ago after using a wizard for almost 2 years. what a great phone the wizard was... I kinda miss using it! Anyhow, i just experienced the sudden activesync failure. I now get random activesync openings on my kaiser with the message "To synchronize your device with a desktop computer... yada yada".
I have already setup a bogus server and set the scheduling to manual.
I have compared the wizard registry to the kaiser registry by searching every instance of 'activesync' and couldnt find anything.
I also deleted all instances of activesync in the notification queue and had memmaid rebuild it.
The device will connect to activesync but pops an error message that it could not synchronize and goes into a guest account setting. So for now I am having to use pimbackup to backup my data on the kaiser, bluetooth it to my wizard, then sync the wizard with my laptop to get the data into outlook. I am considering a hard reset but kind of want to wait until the at&t 6.1 official Rom comes out. I am also considering Chapura Pocketmirror Professional which worked well on an old Ipaq i had (wm2k3) that had sync issues. I also want to get this resolved so i can practice loading a new rom on the wizard. So....
Anyone have a fix yet? I hope so!!!
Oh, and for reference (to answer questions from other threads), my kaiser battery drains 4 to 5 times faster than the wizard in side by side use, and the kaiser definitely does not have a transflective screen while the wizard does... bummer. but the kaiser is tremednously faster!
1. Disconnect the device from your computer.
2. Try going to your device and select:
start->settings->connections->USB to PC.
3. Uncheck "enable advanced network functionality"
4. Reconnect the device.
Active Sync....
Hi,
You can try "PocketMirror® Professional 2.2.4 for Windows Mobile", its a pretty good syncronization tool, but it costs a few bucks...
I've been using the trial version of PocketMirror and must say its pretty good with my TYTN 2.
Regs,
The Reaper.
... my thoughts exactly
yeah, i tried the usb to pc option as well. even downloaded a cab from another thread that allowed me to choose rndis or usb mode. neither worked. I will probably use pocketmirror pro as well...
Hi, I just flashed a new ROM on my Orbit that works brilliantly, no issues at all, apart from the fact that the computer now doesn't see the device at all. Not even the blo-blong sound when you connect any USB device. The only thing I get connecting the cable is charging the battery. And if I start Active Sync on my Orbit I get the same message as mystic_nacho:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC"
I just tried an hard reset to try to fix the issue - no success..
Before flashing everything was fine..
Btw, my wife Diamond doesn't connect either, and it never did it: something related to the TouchFlo thing?
Any idea?
The ROM I flashed is
gullums TouchFlo2D beta 4
update
I found the Diamond 'Getting started disc' and installed the Windows Mobile resources tool...
The disc I have from the Orbit box is for Windows Mobile 5, I guess it's not worth to find it out and try...
Nothing changed, anyway.
update 2
Yesterday night out of the blue - while the Orbit was still connected to the pc - ActiveSync started to work... F. knows....
i had the same problem - sync was working fine and then stopped. what worked for me was to go to USB to PC under settings and uncheck "enable faster data syncronization".
hi,
i also had sync. problems in the past.
searched for months.. since i figured out that some registry entries on my PC where missing!
imported the mayor setting from my brothers PC and TADAAAAAA. problem solved.
search my threads and maybe you 've luck with my soloution!
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Have you recently used a memory cleaning Application like memmaid, Clear Temp, or SKTools? You might have cleaned out some important notification files, like repllog,exe that is used for activesync.
I had the same thing happen to me when I first used these cleaners. I had to do a hard reset on the phone to make it work again found out about the remedies listed below after the reset.
I have heard others were successful repairing these notification Queue's with MemMaid. You can hold your stylus on the repllog,exe notification, and a popup up will appear, asking you to Recreate ActiveSync, or rebuild notification Queue. I don't know if this feature is available in Clear Temp, or SK tools.
I've also heard of restoring activesync by unchecking all of the folders, syncing, and then adding each folder back to the list, one by one, until all is restored.
I too have just developed the same problem.
I have 2 TYTN II' one will sync fine the other wont.
It all went horribly wrong after I tried to install Wisbar and an Ipod theme, after I uninstalled it, cos it didn't work I found I could no longer sync with USB to PC and the sync option is greyed out on my phone. The phone will charge with some of my usb cables, but now even seems fussy about which cable will charge and some now won't.
I am given to wondering whether the usb connection on my Phone is the problem...everything else seems to be working fine.
I have even installed different ROMS via the memory card still the problem persists.
I would love someone to come up with a fix
**UPDATE**
Well I now have got it working, in my case I was right, the usb connection on the phone was to blame. I took it to a mobile repair shop, I told the guy that I thought it was faulty he took one look at it and said that I had a bent pin, he got a little tool out and teased it back into position, sure enough when I got home it worked fine so now I am able to sync again. Not sure how long it will last though.
**Update 2**
Failed again, at least I know what's wrong now.
Whenever I connect my Tilt (Original WWE HTC TYTN II rom 1.56.405.5 and radio 1.27.12.11 flashed on it) I sometimes get Activesync to connect and sync, and other times it just gets stuck saying "connecting" and the activesync icon is spinning and green permanently. In order to get out of that I have to pull the usb plug, but then the Tilt freezes and I have to do a soft reset. Then after that it connects and syncs fine for a few times and then it has the problem again. I have tried it with the "enabled advanced network functionality" checked and unchecked, and still the same issues. Although, I only tried it once with the box unchecked. Also, what I noticed is that when it is syncing and checking for changes on the device, it reads through my "favorites" like two times beofre it says "connected". I have other PPC synced on other computers and they never read completely through the favorites, once or even twice.
Any help greatly appreciated.
Thanks
Re-post because no one answered: Weird Activesync Issue
Whenever I connect my AT&T branded Tilt (with Original WWE HTC TYTN II rom 1.56.405.5 and radio 1.27.12.11 flashed on it) I sometimes get Activesync to connect and sync, and other times it just gets stuck saying "connecting" and the activesync icon is spinning and green permanently. In order to get out of that I have to pull the usb plug, but then the Tilt freezes and I have to do a soft reset. Then after that it connects and syncs fine for a few times and then it has the problem again. I have tried it with the "enabled advanced network functionality" checked and unchecked, and still the same issues. Although, I only tried it once with the box unchecked. Also, what I noticed is that when it is syncing and checking for changes on the device, it reads through my "favorites" like two times beofre it says "connected". I have other PPC synced on other computers and they never read completely through the favorites, once or even twice.
Any help greatly appreciated.
Thanks
tk123456789 said:
Whenever I connect my AT&T branded Tilt (with Original WWE HTC TYTN II rom 1.56.405.5 and radio 1.27.12.11 flashed on it) I sometimes get Activesync to connect and sync, and other times it just gets stuck saying "connecting" and the activesync icon is spinning and green permanently. In order to get out of that I have to pull the usb plug, but then the Tilt freezes and I have to do a soft reset. Then after that it connects and syncs fine for a few times and then it has the problem again. I have tried it with the "enabled advanced network functionality" checked and unchecked, and still the same issues. Although, I only tried it once with the box unchecked. Also, what I noticed is that when it is syncing and checking for changes on the device, it reads through my "favorites" like two times beofre it says "connected". I have other PPC synced on other computers and they never read completely through the favorites, once or even twice.
Any help greatly appreciated.
Thanks
Click to expand...
Click to collapse
First, a suggestion: Bump your old thread. Don't start a new one!
What other applications do you have running in the background? You said it syncs for a couple of times after soft-reset, so, I am wondering if you have any other applications causing the problem.
Lots of things could be causing your problem. Here are some things for you to try:
1. MOST IMPORTANT: Make sure that you plug your device directly into the computer. Do not plug the device into a USB hub or other device. If you are using a laptop, do not plug the device into USB ports in your docking station. More technically, make sure that the port you are using is a Root USB device, not a Generic USB one. This make quite a difference in Vista, because locking your computer or having a UAC prompt while you are connected to a generic USB device seems to interrupt the connection.
2. Make sure that you have "Advanced Network Funcationality" enabled.
2. Make sure that you have the latest version of ActiveSync or Windows Mobile Device Center (Vista). If you are using Vista, the current version is 6.1. This version has some updated drivers that seems to help immensely with stability.
3. If you are using Vista, make sure you have all the latest OS updates installed. There was a Windows Update sometime back in November of 2007 that fixed some serious bugs in the USB drivers in Vista.
4. If you have Windows Firewall Client for ISA installed, do a search on the Microsoft website for possible problems with interactions between ActiveSync/WMDC and the firewall client.
Hope this helps.
Cardyin
In my experience - a year with an 8525 and 5 months with the Tilt - having "Advanced Network Functionality" disabled, gives more consistent positive results when syncing to a PC running XP.
OK.
Sherpa: I have no other applications running in the background. I always close all apps before a sync out of habit.
Also, I am not sure how to bump the thread.
Cardyin: I plug directly into my laptop, don't use a USB hub or anything. I don't have a dcoking station either.
I have the latest version of activesync: 4.5
I am using XP SP2.
I have no firewall.
dgduris: I have tried it both with "advanced network functionality" enabled and disabled, same results.
Thanks for responses
Anyone have any ideas about this problem??
Are you sure you don't have a firewall running? I have a similar problem with ZoneAlarm if I forget and leave the firewall on High security. I have to switch it to Medium security in order for ActiveSync not to freeze up like that.
I am positive, and if it was the firewall, it would do it all the time, not just every four or five syncs.
Anyone else have any ideas??
Anyone at all??
I can't solve the problem but I could advise as to a quicker way to get it synced when it decides to play up.
When mine does the interminable "connecting" business, I click on the "stop sync" button. It usually takes 20 seconds or so to stop.
I then click the "sync" button (same button) and the device always syncs immediately.
I don't know why it does this - and it does it a little too often for my liking - but that solution works for me.
It's a lot quicker than disconnecting and soft resetting too.
1) You say you dont have a firewall... I assume you mean other than the windows firewall. Try turning that off and then plugging it in. If it connects then you know it is a firewall issue. You can manually add the sync apps and ports to the firewall exlcusion list.
2) Try disabling the device lock if you use it. I had a shortlived problem with a pin lock blocking syncing. I disabled the pin, synced and then re-enabled the pin and it worked fine afterwards.
Tried that too...
Sparrowhawk said:
I can't solve the problem but I could advise as to a quicker way to get it synced when it decides to play up.
When mine does the interminable "connecting" business, I click on the "stop sync" button. It usually takes 20 seconds or so to stop.
I then click the "sync" button (same button) and the device always syncs immediately.
I don't know why it does this - and it does it a little too often for my liking - but that solution works for me.
It's a lot quicker than disconnecting and soft resetting too.
Click to expand...
Click to collapse
Thanks Sparrow. I found that out myself before as well. But I am sure there is another way to fix this.
OK
unwired4 said:
1) You say you dont have a firewall... I assume you mean other than the windows firewall. Try turning that off and then plugging it in. If it connects then you know it is a firewall issue. You can manually add the sync apps and ports to the firewall exlcusion list.
2) Try disabling the device lock if you use it. I had a shortlived problem with a pin lock blocking syncing. I disabled the pin, synced and then re-enabled the pin and it worked fine afterwards.
Click to expand...
Click to collapse
Right, all I have is the windows firewall. I will disable that and try a few syncs.
As far as device lock or pin, I have none setup on my Tilt.
But Thanks for the responses.
Seems like at least one other person is having this issue. See Sparrowhawks post...
Anyone else have any ideas?? I tried the above advice and still not syncing correctly.
I have tried all the suggestions here and nothing is working. I can get the device to sync only about 3 or 4 times, and then it just keeps saying "looking for changes". I have the AT&T Tilt, with the original WWE HTC rom flashed on it. The way I have to get around this is to click "stop" on my PC and then wait abut 2 to 3 minutes for it to stop attempting to sync, and then when I click on "sync" on my PC it connects no porblem. Or I have to unplug the usb cable and soft reset the device, what a pain!
Anyone have any other ideas please?
I just noticed something else that may help identify the problem.
When I connect the usb cable to the device I get a pop up message from my laptop telling me that my wifi connection is connected and signal strength is good. This message is on the laptop, and then the device will not sync and keeps saying 'looking for changes' forever.
BUMP>>>>>>>>
Hi, i have recently installed ms active sync 4.5. However my tytn ii will not establish a connection with my pc. It charges just fine but does not connect. I have searched all over but did not find a solution to my problem. i was wondering if it mightbe the cable i got with my device when i purchased it. it is a usb to "mini usb" like the motorolas and nokia 6300 use. Could this be my problem?
I doubt it's because of the cable (though could be). Try unchecking start>settings>connections>usb to pc.
I have the same problem, and have tried connecting with and without advanced network functionality.
activesync does not respond at all, even when trying to connect from activesync on my pc.
I have the same problem, charging o.k., but USB connecting not work
Before I had same problem. The reason was I have installed some 3rd party program what somehow blocked the sync.
I have un-installed this program but it couldn't help because the registry setting was modified by this software. So finally I ended up with a hard reset and reinstall everything. After that the sync just work fine again.
Sigh, i thought it might come to that.
hard reset 2x, no effect
flah rom from SD card, Duty V1 Daimond....no effect
flah rom from SD card, L26 V6 Daimond.... I have the same problem, charging ok, USB data connecting not work...
Well, hard reset complete to no effect. So frustrating!!!! I have been troubleshooting for ages and have nothing to show for it. Surely someone on this forum has solved this problen before.
Hi
I had the same problem following a rebuild of my laptop.
Problem traced to my firewall which had blocked the connection.
Once rule changed to allow no further problems.
Hi colinm, what did you do exactly? It may help me out of this situation.
Doesn't anyone know anything about this?
Yeah i had it get the latest update for active sync from windows its a latest driver pack goto teh windows home and look on there it sorted my one out
what version is it? i have 4.5 right now.
If you could provide a direct link that would be great.
I was trying in 2 different PC ( Vista, Win XP), but the same problem, cable is ok....
I would really like to know what the more experienced members think about this but no-one really seems to want to reply. also i would like to know is the usb data cable plug identical to the htc original handsfree plug which is an exact fit. as i mentioned before my data cable is more like a mini usb, like the motorolas use. it fits (not perfectly like the handsfree), charges but there is no recognition between the device and the pc (xpSP2 running activesync 4.5 which came with the device).
Please help, i may seem to be a noob but i have tried available advice and troubleshooting has become repetitive.
My Mobile Device Center from my Tilt to Windows Vista stopped working a few weeks ago. Tried everything to no avail.
there was one thing that i couldn't do while troubleshooting.
"Do the following:
Disconnect the device.
Open Network Connections in Control Panel on the PC.
Note If your Control Panel is set to Category View, open Network and Internet Connections, and then open Network Connections
Right-click the local area connection created by ActiveSync, and click Properties. In the Connect using box, Windows Mobile-based device is displayed.
In This connection uses the following items, select every check box (to select all protocols).
Reconnect the device."
i cannot see the network icon active sync has created. which leads me to believe that this might be the problem. does anyone know how to fix this?
will updating to SP3 do anything, gonna try will let you know.
link with answer:
http://forum.xda-developers.com/showthread.php?t=362679
thanks champ worked a treat. eventually.
Hi,
I am getting a bit frustrated over this.
When I connect my X1 to my Vista x86 nothing happens (well the USB task tray icon show for about a second and vanishes again).
When I disable the "advanced option" in the USB/PC connection settings in the X1 I at least get a USB connection with something identified as "PocketPC USB Sync".
Any idea why this is happening and how I can get a real connection with the win mobile device center?
Thanks for helping me out!
Cheers,
Tillman
maybe give this a try:
http://modernnomads.info/wiki/index.php?page=Windows+Mobile+Device+Center+Troubleshooting
I've once had the issues of not able to connect my Windows Mobile device with vista too, and it can get very annoying.. good luck with it.
You might want to try and disable the firewall and then connect the device. I had this problem with Sygate Personal Firewall (sygate was bought by symantec and personal firewall is now terminated and no longer available)
Thanks for the quick response guys!
I already tried disabling the firewall (nod32) but that did not help.
Also checked all services - everything is peachy in that department.
But still - no connection.
When I switch back to "legacy mode" (disabling the advanced option in usb/pc settings on the device) then the device will tell me that I need to install active sync 4.5 or higher and wmdc still does not connect.
This is really strange...and annoying and the same time.
Any more ideas or any way for me to debug what's going on?
Thanks for you help!
Have you intalled "Windows Mobile Device Center 6.1" on your Vista-PC?
The MobileDeviceCenter should be standard without the need to install...
At my Vista Home the X1 had no problems to connect.
Open the Mobile Device Center and delete all old connections of other PPC. Then start your PC again, Softreset your X1 and try again. This should help. I had the problems too, when first connecting, because he didn't liked my G900-connection which was first
After this I too could install my G900 again and no problems since yet (2 weeks).
pf said:
The MobileDeviceCenter should be standard without the need to install...
At my Vista Home the X1 had no problems to connect.
Open the Mobile Device Center and delete all old connections of other PPC. Then start your PC again, Softreset your X1 and try again. This should help. I had the problems too, when first connecting, because he didn't liked my G900-connection which was first
After this I too could install my G900 again and no problems since yet (2 weeks).
Click to expand...
Click to collapse
Well sometimes the Mobile Device center could stuff up or not work due to some issues such as installation of Mobile Device Center 6.1 went wrong. I have experienced that I think I didn't follow the procedures correctly and things just wouldn't work. Eventually I had to do some uninstall and reinstall many times to finally get it working.
When I first plugged mine it it installed some drivers but didn't show up in the Mobile Device Center; unplugging and replugging in caused it to work...did you change settings in between plugging in for the second time?
What I have tried so far (and nothing worked):
Uninstall / reinstall WMDC
Uninstall / reinstall Win Mobile Remote Adapter (yes, this does show up once I am connected with "advanced" USB mode)
Uninstall / reinstall "PocketPC USB Sync" (shows when X1 is set to legacy USB mode)
When in "advanced" mode I can also see a new LAN connection showing up in network overview.
The same X1 on a different Vista 32bit right next to this one will connect just fine. So it's definitely about a driver or config thing with this Vista.
This is driving me...well you know what.
btw, you did try restarting your comp when performing some of those steps, and you did try different USB ports right?
I know that you had to ask.
Yes I did. I have rebooted the system several times in between all those reinstallation tasks.
By the way. When I am in USB legacy mode and reconnect the USB cable then the X1 will show a messagebox telling me that it's connecting with the host and that the user credentials / user account (having to translate here) are correct.
But still NO connection visible in WMDC.
I had the same problem with my X1. I assumed that because my HTC Diamond worked the X1 would as well.
I finally installed WMDC from the SE install cd, and bingo!! al good. Hope it works for you...
Wow!
Even though it does not work (yet) it's showing some new signs.
Installing WMDC from SE disc fails at 99% progress and then rolls back.
There's gotta be some installation error log this, right?
Thanks for coming up with that suggestion. Really, I should try installing from vendor CDs more often instead of hunting down the latest version on the net.
TillmanZ said:
Wow!
Even though it does not work (yet) it's showing some new signs.
Installing WMDC from SE disc fails at 99% progress and then rolls back.
There's gotta be some installation error log this, right?
Thanks for coming up with that suggestion. Really, I should try installing from vendor CDs more often instead of hunting down the latest version on the net.
Click to expand...
Click to collapse
maybe give event viewer a try and check under Windows Logs (not sure if it will be application or system tho)
just in case you aren't sure, in vista either type in "Event Viewer" in the start menu search bar, or type in "eventvwr"
Don't you just like vista?
That helped (to install SE's WMDC). The issue was that my HTC Universal was still connected to one USB port (for testing purposes since that device is not recognized either).
As soon as I unplugged the HTC I was able to complete the WMDC installation.
Unfortunately though it still won't connect to my X1.
Any more ideas?
what is your settings in Windows Mobile Device Center connection Settings?
Well here is my settings that is working with my x1:
Allow USB connections checked
Allow connections to "DMA"
This computer is connected to "Automatic" (this shouldn't matter)
Allow automatic device authentication checked
Allow data connection on device when connected to PC (this shouldn't matter either)
also, while this link was in the first link that I have posted for trouble shooting, just want to make sure you actually tried The offical Windows Mobile Device Center troubleshooting guide?
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
namely these steps:
Quote"
If Windows Live OneCare is installed on your machine, it may be blocking the device connectivity. Please click here for the steps to configure Windows Live OneCare to allow the device to connect.
My device wasn’t connected during this installation.
While it is not a strict requirement that you have a device connected during the installation process of Windows Mobile Device Center, we highly recommend that you do.
"
I didn't have the DMA set (changed that now). Everything else already was like you described and it does not work.
This really freaks me out. I always hated my iTunes/iPhone connectivity but that honestly works much smoother. Of course I do understand that this behavior is non standard as I have experienced myself that the phone works with my other Vista machine but that does not really help me here.
Any update on this? I am having the same problem.
I'm having the _exact_ same problem too, but in Vista x64. I don't know why WMDC can be such a c**t sometimes, as I have never been able to 'sync' with my Media Center PC.
My only saving grace is that my laptop has Bluetooth, and syncing works great on it. I have never had success connecting the USB cable (with many options changed around of course) to either of these computers. Only Bluetooth syncing works for me...
Hopefully we can find the answer!
What USB cable are you using??? the one that came with Xperia??? Cos the one that came with my Xperia never worked out of the box, it could only charge...
I also got another extra cord which came in another box, that worked fine for both syncing and transferring data until today, now it says USB device not recognized, maybe I was trying the flash X1 with new ROM through SEUS, did the whole lower volume key and power button to get the 3 strips.
Now I am using the USB cable that came with my external HDD, that's currently working, hopefully it won't fail me.
so any ideas??? I don't want to keep changing cables...