Related
There are a couple of standalone updates around but not too much information about any improvements or otherwise with the Blue Angel variants. So lets post our results and see if these updates are worth upgrading to. My XDA IIs is running
latest rom 1.31
bt patch 3900
radio 1.06.02
Bt upgrade seems to have made minimal changes, maybe a touch louder but thats all, no other changes noticed
Radio 1.06.02; cant say i notice any changes here as i didnt have any calling problems with ver 1.02. I upgraded cos of a problem with wifi which is still there
Anyone have anything to note about the wlan patch? If there are any other patches i missed please post what they are and what effects it has had
Hi.
I have spent a while looking for the patches. Can you point me in the right direction?
I actually went back to the Dangaard BT stuff...version 3500 and patch. This worked better for me with my Logitech BT Headset.
I upgraded the radio also to 1.06.02...can't really say it made a difference, but hell, it didn't hurt either...
BT Build 3900
Hi.
Upgraded to Build 3900 from 3500, found on the FTP server.
Only dif. is that my SE HBH 300 is now faster do disconect a call when pressing the on/of switch.
I was fooling around alot with my BA the day i installed the Build 3900, and right after installing the patch i tested it without a Soft Reset. I got a perfect connection without any crackling noise and a really good distance.
After a Soft Reset it was back to the old crackling noise and poor distance.
And i just cant recreate the scenario i had that day
Radio, dont know. Dident have any troubbles with the old one.
Wlan patch, wating for others to tell.
I upgraded my radio rom to 1.06.02 and BT Stack 3900 and found the Bluetooth still crackled on my old jabra bt 200.. just bought a BT800 today and it appears to work better even the caller display works.. with the radio stack upgrade i have had quite a lot of problems connecting to known wifi access points even when all the correct details were in. I also could not connect to BTOpenzone when standing under the access point (and yep i do have an account on it) so I re flashed the radio rom back to 1.06.00 and bluetooth 3900 with high quality audio patch and it all back to normal with abit mor BT Stability :roll:
Jabra BT800 worked straight out the box with no patch needed and has good loud audio 8) and a range of 10 meters ish still a bit crackly at 5 meters though
Marqnet said:
... so I re flashed the radio rom back to 1.06.00 and bluetooth 3900 with high quality audio patch and it all back to normal with abit mor BT Stability :roll:
Click to expand...
Click to collapse
So what you are saying is that radio version 1.06.02 interferes with WiFi somehow....that is interesting... :shock:
Do you remember what happened with your WiFi strength when you turned of BT, or have you not tried that?
Cheers,
HappyGoat
Hi as far as i am aware so far there has been no real issue with the Bluetooth and wifi interfering with each other or should i say i have not experienced any problems. the i ssue was just around using wifi and its connectivity problems i have had with open and unencrypted access points and encrypted ap,s the radio could see them but not connect. my xda came with 1.06.00 as standard and i was curious to see what the latter radio rom would offer. so as i didnt work for me i decided to go backward on step and all seems weel now. will agree interesting one and after trying a number of different 1.06.02 files as i thought the first was corrupt i just decided to revert back to a known to me working rom.
radio version difference
what is the difference in radio version 1.02 v 1.06?
Hi all
I have got Blue Angel:
ROM: 1.42.00 WWE
Radio: 1.13.00
BT: 3900
Last week I upgraded to the T-Movbile 1.42 Rom. I then installed the A2DP profile patch and was amazed that my Omiz OMS600 headphones were actually working using the high quality audio profile, and they were working very well.
The other day I did a hard reset to sort out a few things and left it at that. Later on when I came to reinstall my A2DP it wasn't working, nor was using the headphones as just a normal headset. I tried all sorts, including downgrading my ROM because at that point I was wondering whether or not it was actually on a previous version that I had it working.
Anyway... eventually I decided it was the headphones that had an error so emailed Omiz who were very helpful and sent me the download for their firmware flashing utility. This upgraded the ROM of my headphones from 1.06 to 1.25. I can now pair my headphones as a headset but not as High Quality Audio. I can get it to add a High Quality Audio shortcut in BT manager but when it trys to connect it says: "connection failed". Before it was also saying "service unavailable on device" or somthing similar.
Any assistance would be good.
Thanks a lot.
s_t_harvey said:
I then installed the A2DP profile patch and was amazed
Click to expand...
Click to collapse
Can you, please, tell me where to find this patch?
Someone knows if it works for wm5??
Thanks!
A2DP & WM5
Hi there,
I got the patch from: ftp://xda:[email protected] Upgrades/BT profiles for build 3500/
But I'm not sure if it will work on WM5, I think I have read that it will not, this is my main reason for not moving to WM5 yet... although at the moment while i can't get A2DP working I am not much better off.
How are you finding WM5? Is it reliable enough to compete with WM2003 yet, or is there still a bit of work needed?
It doesn't work under WM5. WM5 has a Microsoft bluetooth stack, this patch does not apply.
WM5 on the BA is quite stable if you have the time to work with it. I am not going back. If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
A2DP on WM5
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Re: A2DP on WM5
s_t_harvey said:
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Click to expand...
Click to collapse
Yeah I think so. Apparently it's not out in the wild yet, but w/ BT 1.2, a lot of people will be looking to do more with it.
shuffle said:
WM5 has a Microsoft bluetooth stack, this patch does not apply.
Click to expand...
Click to collapse
Did you mean: "the mamaich rom has microsoft bluetooth stack". I really hope we can get WM5 with the same stack I had on w2003. (Broadcom, I think). Maybe it is out there but I can't see it...
shuffle said:
WM5 on the BA is quite stable if you have the time to work with it. I am not going back.
Click to expand...
Click to collapse
I agree. By the moment, I'm very pleased with the performance of WM5 on my BA. It actually runs faster than w2003! And I'm beeing very objective, believe me!
I'm having a big annoyance with writting (sms, word, etc) as the spelling isn't allways what I wrote. On the SMS window, it seems the screen gets redrawn all the time and it loose some words...
The other big is not having A2DP. I think is very frustrating having such a nice machine without a good software that makes all its goodness work! :?
Some delayings on the screen repainting and (I'm using Pocket Informant) slow performance on the everyday tasks as opening the contacts list, or changing toanother program, for example...
shuffle said:
If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
Click to expand...
Click to collapse
What do you mean? To have the BT on a low-power mode more or less?
cheers...
looking 4 answers: ad2p & bluetooth & wm5
somebody with an answer to this theme?
WAS: ad2p & bluetooth & wm5
It is somehow possible?
Anybody there? :roll:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
shuffle said:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
Click to expand...
Click to collapse
some URLs????
Thanks!
How do I enable A2DP on my BA??
Hello!!
I have searched the forum many many times and visited wiki, but I could only find 2 threads which is close to what I need to know. This is 1 of them.
I have got Blue Angel:
ROM: 1.40.00 WWE
Radio: 1.12.00
BT: 3900
This configuration came from the recently rom upgrade from o2.
It seems to me that it's possible to enable A2DP on a BA running on WM2003 SE, which allows me to stream music to a bt headphones??
However I just could not find a thread which has an instruction on how to do it. Not even on wiki. After reading some threads, I came to my own conclusion that I need to upgrade me BT to build 3900 and install a patch??
So this was what I did,
Since my BT is already 3900 "offical" version, thus I didn't do anything to it.
I d/l this file BA_OEM_AudioGW (1.33g.00).CAB (83KB) and ran it on my PPC. I then got the audiogw.dll in my windows folder.
That was all I did. It didn't work of course. I have another file, BroadcomCorp_BT1.0.0.3900.cab but didn't use it as I'm already on 3900??
So I was just hoping that someone who has done it and was successful, could point me in the right direction!!! Thanks a lot!!!
anyone tried running both cab loacted at
ftp://ftp.xda-developers.com/BlueAn...age BT 1.0.0.3900 and audiogw.dll - 1.33g.00/
if it works, do let me know. I currently do not have a bluetooth headphones to test with.
I have Omiz headset (with MP3 and radio FM) and due to work with my Magician I had to manually change some registry entries. Point was that my PDA was not correctly identified as a A2DP device (only HF). I paired my PDA with normal BT dongle with A2DP profile, found registry entries with dongle mac adress and copied manually keys coressponding with a2dp service to folder with my headphones profiles. After all that it was possible to chose headphopnes in BT menager as stereo audio receiver.
Maybe its similar and u should look in registry...
jarekt, can you post those registryvalues please?!
Can't get streaming audio to BT headphones
I still have had no luck with the BA_OEM_AudioGW (1.33g 00) Cab or any registry settings under WM5.
BT a2dp WM5
have you tried the file (.cab) i uploaded in BlueAngel under uploads, it let me pair BT Stereo under wm5. Nevermind I looked someone deleted it dont know why. PM me and i can send if you want, I tried to reupload but Uploads appears broken.
I am on thesame situation of errorist.
My machine is on Broadcom 3900, and I want to make A2DP work.
If anyone can shed a light on how to make it work, I'd be very very grateful.
BTW, I have a Motorola HT820.
UPDATE:
I have installed the 3900 stack + audiogw dll even though I had a factory-installed 3900 stack, and I managed to connect in handsfree mode.
I still have not found out how to connect in A2DP mode though...
Any help is appreciated.
Hi All
I dont know how useful this is going to be, but i spent ages doing research to get my ht820 and my 02 xda 2s working properly, and when i did, i wrote a semi bad guide here
http://www.corecodec.com/index.php?option=com_smf&Itemid=29&expv=0&topic=2840.0
if its any use i'd be tempted to maybe write it up proper and put in in the wiki, either way, try some of the steps or files ive listed (most of them are from here)
but it gets it working with TCPMP aswell, which is a lot better than WM10 anyhow
good luck
BTW: ivans rom uses the broadcom stack, so the patch may work, however i dont have the headphones to test it with
i've onstalled this two cabs too, but new profile didn't appeared. Bay Be some registry values didn't appied? who did this patch?
Hi, I have read a lot about updating the BT stack to allow for A2DP on my PDA2, and especially a previous post (XDA2i - bluetooth stuff - newbie question) where the solution was to install the BroadcomCorporation BT-PPC AV.cab file. I did this and it does give me the High Quality Audio profile when bonding and the bonding process seems to work fine. However this results in no sound from my PDA, nor any from the headphones when playing audio! (which by the way are the Blueant BT headphones). Headset mode works fine still. I have tried all the different versions of the BT stack on the ftp site but no joy. Is there something else I need to do to get this working, and is this, maybe, a problem with the PH10D, but not PH10C ??
I am really stumped so any help, suggsetions or pointers greatly appreciated! Thanks.
Roger
I have the same problem with the XDA2i, if I install the cab file then I lose all sound from the PDA, this only started happening after I installed the latest ROM, but even though I have flashed it back to the original ROM I now still get the problem. This stops me using TT3 as well now. Not sure what they did in the ROM upgrade but I am not happy. :evil: :evil: :evil: :evil:
I have read, and read but I can't seem to find a place where I can download a ROM (or any other way) to get AD2P on my 8125. Please someone tell me where. Thanks
anyone out there have an answer?
I just bought the HT820 and all i can do is get the audio to go to the bluetooth headset via mono, and it is very very low quality.
Download latest WM6 cooked roms as they are prepared for it (at least i can hear stereo on my Sony)
MrCLean AKU2.3 does
I know WM5 roms aren't meant to do bluetooth stereo, but mine does. Been working nicely for sometime connecting to my belkin tunestage...
update: now working great on moto h820 headset
landwomble said:
I know WM5 roms aren't meant to do bluetooth stereo, but mine does. Been working nicely for sometime connecting to my belkin tunestage...
Click to expand...
Click to collapse
...mr clean aku 2.3 wm5 rom on wizard, no tweaks and sounding great right out of the box, and in stereo.
After updating my MDA2 from WM 2003 to WM 6.1 there will be no more sound connection with my original T-Mobile car kit. What the hell is changed in 6.1? Is there a registry tweak? If not, how can I downgrade to WM2003? I don´t find any ROMs for 2003 here. I can get a MDA2 with WM2003. Can I create a image from this one and restore my MDA?
Rolf
No, problem to get a T-Mobile WM 2k3 ROM, you can download it there:
http://www.xda-zone.de/thread.php?id=3373
or O2 ROM here: http://www.o2online.de/nw/business/hilfe/download/xdaupdate/older/xda2/index.html
Which of the 6.1 roms do you upgrade to? I have got a car kit too, but I usually don´t use it. I´ll try it if I can find some time to spend it, on it.
Interesting issue
Ups, that was my first double post, so I have to edit it.
Which FSE do you want to try? Mine is the original xda II car kit and it worked well with teijaks WM6.0 german rom, as I tried it last time.
Or do you miss the possibility use the phone without pressing it on your ear, if it to loud around like in a car. In this case try to install the small app speakerphone. It gives you back the (free speaking) function to switch the speaker loud.
BTW: It took me about seven seconds the links, by simply google (xda update rom download). And don´t be pissed:
There is a very strong medicine, to the most interesting issues, called: search in the top row of buttons of this forum.
So use you brain power, it the best weapon you have.
And a good hint for all the brave guys, who want to upgrade for the fist time:
First you have to collect all you need, to switch back to your original rom, cause:
The good girls go to heaven, but the bad girls go everywhere!
So, good luck
Sebastian
To Rolf PM me if you have probs to discuss.
Hello muckelmaus,
It´s the wm6_1_Himalaya_GER_rom_by_efsane.
You think it´s a bug in this ROM?
Do you have another?
But where can I download a T-Mobile 2K3 ROM?
I tried searching for hours in the net. Also in the WIKI. Nothing. Or I am blind?
The MDA will be charged, but there is no switch to the car speakers. Only the build in speaker is working. So the FSE is sinceless. So it must be the OS, cause it is no hardware switch. I checked with my XDA2i, and this is working. But the sound is bad. No basses. Maybe the FSE is only working with WM2003 (not with WM2003se)? I connect it with a high/low level adapter to my radio, and this is working fine with the MDA2 with WM2003. Great sound with Pocket Music. I also buyed a original XDA car kit at ebay for € 2,46 but didn´t test it at this time. I was really happy after finding the registry tweak that don´t cut my notes in the contacts, cuase everything seemed to be working, and now I am pissed.
So I really need help.
On you qestion of your fist post, there is a way to ripp your rom out of your device, as swampy395 described it, to recook roms, but then you are on the way to build your own rom.
I don´t know if it is a bug of this ROM you tried but ther are some other german rom in here:http://forum.xda-developers.com/showthread.php?t=379017 including my fully loaded version of Athers Dark Edition
Btw: which reg tweak you are talking about?
Hello Sebastian,
Thank´s for reply.
My FSE ist the original T-Mobile. Before upgrading to 6.1 my MDA2 is working fine with the car speakers. Now he is sending no sound to my radio, only the MDA internal speaker is working. Before I can listen to musik over my car radio, and a call is coming, he will switch to telefone, after ending, the musik is comming back. I don´t install the added speaker, cause I want to hear stereo. So the HL/LL adapter.
The links that you found are WM2003se links. But I am looking for WM2003.
Wait, I send you a PM.
Martell
EDIT: Found T-Mobile WM2003 at [URL="https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_2.htm[/URL].
Downgrade and now car kit is working.
But why?