PH20A2_Harrier_CEROM_2.03_only_Upgrade_with_MaUpgradeUt_noID - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Found on FTP
Baked 2.03 CE Rom Type II, Only for CMDA Devices
Header Reads:
PH20A2, 54450002, WWE, 2.03
The baked version uses the MaUpgradeUt_noID.exe tool to bypass the country code error.
The Extracted notes.txt reads
1. first time ma_upgrade_noid complained about country code. Ran again and it worked. five minutes total
2. on cold boot the background images are unchanged.
3. \storage\welcome.not ignored. screen align dr. johnson appt cut and paste and timezone set
This article suggests it's not quite that simple. Must create a bootable SD card, etc.
Next time will try putting welcome.not in extrom.
http://www.bostonpocketpc.com/modul...862&group=microsoft.public.pocketpc.developer
4. after the reset immediately set flight mode (so incoming calls and SMSs aren't lost after restore)
5. two icons (one for phone one for network connectivity)
6. extrom programs load fine
7. resets
After reset
1. set date and time
2. restore permanent save items
3. add file explorer to menu
4. button lock on
5. restore email, phone logs, various files from sprite backup. after patch mail databases it's 25 minutes total
6. set device name, owner, and redo wireless synch with "refresh" option
7. check for email corruption (usually orphan empty items in deleted items folder)
8. turn off flight mode
9. test data connection and phone function.
10. phone -- call history -- tools -- set it to never remove call log items
11. install software
Click to expand...
Click to collapse
Have moved the original file upgrade.zip and renamed it
ftp://xda:[email protected]_2.03_only_Upgrade_with_MaUpgradeUt_noID.zip

Related

Avaya One-X v4.0.25 installed and working !

Installed and working on Kaiser WM6 !
Manual install process :
1. Unpack the attached ZIP file with subfolders.
2. Copy all the files to the appropriate folders on your PDA.
3. Change the registry according to the attached registry.txt (change 2 keys and create 4 new)
4. Completely turn off your PDA (to renew the registry). Reset button does not work.
5. Switch the device on.
6. In order to enter the PIN code do: Start -> Settings -> Phone -> Enter your PIN
Now you have an Avaya One-X as a dialer.
Do not forget to fill settings.ini with your own settings.
Enjoy !
baudy2 said:
Installed and working on Kaiser WM6 !
Manual install process :
1. Unpack the attached ZIP file with subfolders.
2. Copy all the files to the appropriate folders on your PDA.
3. Change the registry according to the attached registry.txt (change 2 keys and create 4 new)
4. Completely turn off your PDA (to renew the registry). Reset button does not work.
5. Switch the device on.
6. In order to enter the PIN code do: Start -> Settings -> Phone -> Enter your PIN
Now you have an Avaya One-X as a dialer.
Do not forget to fill settings.ini with your own settings.
Enjoy !
Click to expand...
Click to collapse
What is it? A phone dialer??? I've never heard of it before. Any screenshot?
Can you provide any screenshots???
It looks like a VOIP client
http://www1.avaya.com/campaign/demo/one-x/index.html
could you please provide more info on Avaya one-x? what are the benefits of running this?
thanks!
I believe you need an Avaya VoIP system to get the one x client to work. I know they had a version for thier IP Office system but I don't think they ever updated it to run on WM6
Guys,
This is an application for WM which replaces the standard phone dialer and in addition to regular WM phone functionality it allows:
1. Manage your desktop office phone directly from your mobile
2. Make all operations like call forwarding, EC500 management, etc directly from your mobile.
It requires to have an Avaya VOIP PBX installed at your office.
Without it, it does not make sense at all.
Hi
We have an Avaya VOIP PBX installed at our office..
Could please tell us to connect HTC Touch Cruise wm6!
We have tried everyway we could, and read every document available on avaya support page, with no luck.
thank you in advance.
sortlaih said:
Hi
We have an Avaya VOIP PBX installed at our office..
Could please tell us to connect HTC Touch Cruise wm6!
We have tried everyway we could, and read every document available on avaya support page, with no luck.
thank you in advance.
Click to expand...
Click to collapse
Look on Avaya's website and see if thy have the client available to dowload. Last time I checked it was for WM 2003.

Weird worry with trusted certificates

Hi,
i needed to restore my device from a backup with Sprite version 6.2.2(upgrade full version not the light one coming with my stock rom) ,
when a strange event occured:
After the restore and the device's reboot all none pre-installed(thoses present in stock roms) softwares werent able to be launched,
i had a message " not signed with a trusted certificate, or one of its components cannot be found"
and if i cliked on "yes", i had another message like "pocket informant failed to launched /Or editor unknown" and that with all the soft i had installed since my kaiser purchasing(voice command(from MS !)pocket mechanics , phm regedit, even sprite backup).
I tried the xdadevelopper kaiser tweak.exe and advanced schapps configuration tool(to tweak the "none trusted cabs installation security" but both refused to "run"(kaiser tweak) or be installed (schapp's) from my sdcard and so tried to run an install from my
pc of "phm regedit" but windows mobile center 6.1(under vista) gave me an error "unable to install/install failed" like if all my device was 'read only'
or if no "administrator privileges" were given to me on the device(from laptop or its sdcard).
ps:i wasnt able to merge(double tap) even a registry backup made on my sdcard before or install the SDK certs cab file .
So from my backup folder on my sdcard(where i had 3 different backups with 3 different dates), i tried to run the backup.exe(s), but i had the same worries(the exe wasnt able to be launched).
I decided to wipe out all datas via 'parameters/system/wipe' all datas"(kind of "soft" hardreset) (reboot+"device's first use configuration")and run the backup from the sdcard without any luck.
(the restore is done but at the device start i had many errors like "Pi calendar failed to launch", "voice command" etc
the only way to retrieve my device was to wipe out all datas
like just above and launch a restore from sprite backup on my laptop
(i had to reconnect/disconnect/reboot from usb my device +wmc 6.1 close/"re-launch", 2 or 3 times, in order to be able to restore it)
What i dont understand, last week i had to do a full restore from one of my backups (from sd card ) and it worked(no certificate worry and without prior wipe out) :
So when i wipe out all the kaiser and launch a restore from sdcard
why do i have a worry with "trusted certificates" as the backup is an image
of what was working(when created), it's as if some registry parts or "certificates"(dont know what kind of files, it is) were missing
why?
any idea replies will be welcome !
thanks in advance
Hi, I had the Problem today,too... when Sprite Backup fails oder something like that, then all no plugged-in certificates are away.
I don't know, where I could restore them - some people who had the same problem didn't found any help by restoring a former backup.
But there's a (little bit annoying) solution WITHOUT Hard-Reset :
1. At first you need a Registry Editor - and I think your Registry Editor won't work, too - because of the certificate.
So - Reinstall it
2. Then go to the Key HLKM\Security\PromptExclusionList and erase everything (except from DEFAULT). So that Registry-Directory is empty.
Now there are the thirst-party-Certificates are no more known from Windows Mobile
3. Now go to your Programs in Programms-Menue which didn't worked... you will be prompted everytime because of the certificate - and confirm it with yes... and you have the certificate for further times
When you have very much programs installed... then you will have very much to confirm... but after a Hard-Reset... I think that's much more mork, isn't it? Especially when you have a special theme (I love the black theme for 1.93)...
Hope it works fine, too. And I'll have a look for another Backup Tool, which makes Backups and doesn't destroy certificates
Greets from Germany
Pierre
Hey,
Just had this problem too, no one seems to have written the solution about this. I had to do a hard reset my certificates were also missing, also I was unable to remove installed programs via remove programs. Using HTC Touch HD with stock WM6.1 and upgraded Radio 1.12.25.16.
The back up was made by SunnySoft 3.7 and was a self executed one, which I did once the hard reset was completed. However, I found if I then reinstalled SunnySoft via Active Sync and then restored the backup again this solved the certificate problem but not the uninstall one.
I am now trying a new hard reset and then install SunnySoft before I restore anything, hopefully this will work.
No joy with the backup. The problem with the certificates was because SunnySoft program wasn't restoring the whole backup (I guess due to its size), works better when files restored bit by bit.
However, everything appears to be fine until I try to Remove installed software...Nothing I can do allows me to remove anything from the program list, just says it wasn't uninstalled properly do I want to remove it from the list (but doesn't). I can't even reinstall the software to fix it, just fails install.
Is there anyway to rebuild the program list or reinitalise the list to install over the top again and allow items to be uninstalled? Where are these settings located?
Failing that, I'll want to rebuild the system from scratch, but I need to know where the contacts and SMS messages are located in the system (so I can at least keep these).
Thanks for any assistance in advance. By the way, what is the best backup software which works for WM6.1???
Solution...
Moved on a bit with this (sorry if no one is interested in my self replies but this might help someone with the same issue)
The Remove Programs seems to end up in two different states:
1) Blank and new installs fail 2) Populated but programs can not be removed but new installs work (This state we can work with).
I think to get to state 2 the difference is installing Sunnysoft Backup after the Hardrest via active sync (I guess this helps it initialise the Remove Programs list).
Restore Data:
As mentioned before if the Restore doesn't work in one go (mine is about 50Mb compressed) then only restore the files (all except windows/internal store/registry/database), this gets a good chunk out of the data out of the way (the system resets after which is why we purposely miss out anything which effects what runs on the system). Now restore all the "folders" within windows (except appdb/AppMgr/Start Menu/Start Up/System and files within Windows), again this avoids anything new running without everything being ready when it restarts. Finally, restore the Database, Registry, Internal Storage and any remaining folders & files within windows. If you don't get certificate issues and the Remove Programs is populated it is ok to move on to the next bit.
Remove Programs:
This problem here is the SunnySoft backup defaults to not including tmp files. Unfortunately the registry references to tmp files stored in Windows\AppMgr\{appname}\ which are now no longer there (THANK YOU SO MUCH!!), this is what is stopping the program from being removed or reinstalled correctly.
1. Look up the name of the tmp file in the registry: HKLM\Security\AppInstall\{appname}\Uninstall\
2. Copy an old tmp file with the correct name i.e.1001.tmp in Windows\AppMgr\{appname}\. NOTE: Install a new program, copy it's tmp file. Then uninstall the new program again.
3. You can also note down the references to the other files if you don't have the original install (but this won't be the cleanest way).
4. You can now go ahead and remove the program from Remove Programs List.
5. Finally remove the files you noted or reinstall the program (and uninstall as you would before if required)
How stupid.

Can not delete/ rename files through explore or on device. Unable to synchronize.

Heres a strange one.....
Just recently tried to sync my MDA Compact 4 and got the following error message:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
On investigating further, i tried the following suggestions:
- Turned off all firewalls
- Removed partnership between phone and pc (on both the phone and pc)
- Unchecked "Enable advanced network functionality" in USB to PC settings on the phone
- Reinstalled Activesync 4.5 (and also a tried a repair)
- Different USB cable and USB port (not using a USB hub)
- Several soft reboots
and finally tried a different PC just to see if i could get a guest partnership! Guess what? Same error message.
I am, however, able to explore the phone with activesync but only explore. I cant change file names, add files or delete.
On even further investigation, i've now also discovered that i cant delete/ rename files on the phone itself (using file explorer on either the device or internal storage). When i do, i get the following message:
"Cannot remove/ rename etc: Access is denied.
Be certain that the folder/file is not write-protected and is not currently in use"
(Even creating a new folder and then immediately trying to delete it gives the same error)
If i connect the phone to the PC as a disk drive though, i am able to delete files just fine. Add new files, rename them etc....without any problems.
This leads me to believe that the problem is with Windows Mobile!?!
Has anyone else experienced the same/ similar problem and figured out how to fix it? (Other than perform a HARD reset/ Clearing the storage)
Any help would be greatly appreciated.
Thanks
UPDATE:
I found this on the Microsoft help forum.
Although it hasnt fixed my problem, it might help someone else who is having the same problem.
1) soft reset device
2) Start / Office Mobile / Word
3) Create a new document (click on New)
4) type some text (just plain text - no formatting - it was 'plain text document') just a few characters
5) File / Save As...
6) I have selected type 'Plain Text'
7) It asked me whether I want to save it at 'Word document instead' - I clicked No.
8) I have powered off the device and did soft reset
9) Start file explorer, find the file (it was in My Device / My Documents), click on it - it opens Word again.
10) Add some formatting (I have selected part of text and changed font to bold)
11) Close Word - it asked whether to save it in Word format - this time I said Yes
12) Power-off the device and press soft reset again
Also, i noticed that i am able to modify any DOCX or TXT file within Mobile Word (and even delete them) just not from File explorer on the device or Explore within ActiveSync.
Can anyone help???
Same problem with different model
sh00ter said:
Heres a strange one.....
Has anyone else experienced the same/ similar problem and figured out how to fix it? (Other than perform a HARD reset/ Clearing the storage)
Click to expand...
Click to collapse
You're not alone. I have HTC Touch Pro (ie. Raphael) with exactly the same problem and I've also already tried that "Word-solution" several times without any help. However I can synchronize with my exchance server via 3G. I can also add/remove/rename files if I use some of the Office mobile applications, but not with file explorer.
Getting sooooo frustrated, but still not willing to do the hard reset.
Do both of you by any chance have Fsecure Mobile installed? Just trying to narrow the cause for the problem.
Same Problem Here
I have a T-Mobile Wing and I'm having the exact same problem. Anyone figure out whats up yet? It's so strange that I can delete/remove files and folders through active sync, but I can't through the device file explorer. I have also tried creating a folder with the file explorer, but then I cant delete, move or rename it.
Here's something that might work for you, http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
Unfortunately it hasn't work on any devices that I've seen but then again, I'm still thinking that F-secure mobile is causing the problems in our devices. F-secure has confirmed that they have heard about the problem and are investigating it.
This is very interesting as in the past 24 hours my Xperia X1 has started to do the same, I can create files ok but am unable to remove/copy files.
I am using f-secure mobile security, so it would seem there is an issue there. I'll fire an email to them to get myself on a fix list when it comes out if that's the problem!!
Any news on this issue?
I am using a trial version of F-secure mobile (on my SE Xperia, a sort of HTC ). Now, out of the blue I am experiencing similar problems:
- not able to connect to pc via Active Sync
- not able to delete/rename/copy files on both internal as external memory
- programlist appears empty
Did anyone try to remove F-secure to solve the problem?
Thanks.
I just got a reply from F-secure. They have identified the problem and are expecting to release a new version of the client within next two weeks.
Hopefully that's the end of this...
Meiz- said:
I just got a reply from F-secure. They have identified the problem and are expecting to release a new version of the client within next two weeks.
Hopefully that's the end of this...
Click to expand...
Click to collapse
Updated client was published on last friday.
I am experiencing a very similar problem on my HTC HD2 with wm6.5. If I connect the phone as USB mass storage i can copy files as much as I want to on the SD card, however when I disconnect the cable after copying WM6.5 cant read the folder sometimes.
Othertimes when I connect the phone as Activesync and start to copy some files, it stops half way through, sayign "access is denied". if that happens I cant transfer any files anymore, it will always give same error until some time passes, few disconnections, restarts, no consistency, no definite workaround. The strange is when it gets into this "access is denied" mode I can still browse the device (storage card) and create and delete folders. very-very frustrating.... did a few soft and hard resets, reinstalled activesync couple of times, still no joy...and i dont have any FW app on my device...
thanks.

Wm 6.1 roms

Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]
BEATTWEAKER said:
Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]
Click to expand...
Click to collapse
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?
All of your questions are answered inside
refuse2bstopped said:
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?
Click to expand...
Click to collapse
I have been using this rom for a couple of weeks now and I have just discovered once I reflashed it I have seemed to fix the only error that was found...
here is a posting that will give some info and hopefully answer alot of your current questions..
Default FAQ
FAQ Section:
Read everything in this section before downloading the roms and flashing.
If you don't understand it, read it again and again until you understand.
Once your done flashing your device double check back here again to configure your device.
I will not reply to any subjects already covered in this section.
I'm not trying to be rude, I'm just very busy with finishing up this project and also working on other projects.
Back up your phone before downloading and flashing this rom... I do not want anybody to loose their data due to flashing this rom, as the rom will erase all of your data...
How To Flash Rom
HERALD-USPL-beta3 - posted by tiksister - rapidshare
How-To Flash the HERALD-USPL-beta3:
Download and extract both files.
Place the extracted OTP v7.1.nbh into the Herald-uspl-beta3/RUU folder.
Move the entire Herald-uspl-beta3 folder to the root of the c:\.
Follow the simple readme file.
Break down of how to flash this rom:
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Instructions by Ivanmmj
===================================
If your device is already HARD-SPL read the following link before flashing.
HARD-SPL
======================
Disable Random Access and Enable Scrolling
With random access you must do the following to enable contact scrolling.
Click on the contacts button at the lower right hand side of the screen.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
Now I know the following will sound strange but it will enable scrolling in the contact menu.
Repeat the following steps again, and the random acess bar on the right handside will go away and scrolling will work again.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
If you want to enable random access, just go back and uncheck the "Show alphabetical index"
======================
How to turn off QuickMenu
/Start/QuickMenu/Exit
It will prompt you with "Exit QuickMenu?
Choose yes and it will not startup again even after a reboot.
Things to do after flashing your device:
Network Wizard
Go to \Start\Settings\Connections\Network Wizard
Choose your location and provider, do not reset the device when prompted.
Connections
Go to \Start\Settings\Connections\Connections
Once completed save and exit
Video on how to setup your device after flashing
MMS/SMS Setup
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: sendlimit3 which will be set to the default of 300k. u gotta change it to 1228800 and than the 1200k will appear.
note u can also change sendlimit 2, 1 to be the same as what ever u decide to change wap * sendlimt* to be. once u do this the 1200k will appear.
++++in between doing the above and below, u have to go to
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
=======================
Soft Keys
The calendar and contacts keys can be changed with the following steps.
/Settings/soft keys
Use this setting feature to change to what every programs you want.
========================
Show CIM contacts
By default it has been disabled so your CIM contacts will not display, use the following reg hacks to enable it.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSIM"=dword:00000001
=========================
Show clock instead of battery
If you want to show the clock instead of the battery or the other way around, use the following reg hack.
Clock
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:0
Change the current dword:0 to 1.
Battery
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:1
Change the current dword:1 to 0.
==========================
M2DC
Just tried the M2DC theme manager on 7.3 Std, with a renamed .zip file to .m2dct file (specifically the KnobiSkin from the M2D skin thread).
First time, it locked up. M2DC continued with spinning icon until I forced a reboot. Touchflo was off after reboot, and after enabling it everything appeared to be the same.
Second attempt, I disabled Touchflo from today before applying the new theme. Got the "Applying Theme" prompt. After M2DC closed, I reactivated touchflow and new theme was applied.
Simple instruction for use of M2DC Themes on OTP 7.3:
Find a skin you like, download the zip file (not the cab),
Rename file to .m2dct,
Copy new file to the themes directory of the M2DC install directory,
Disable touchflo in Today settings
Start M2DC,
Go to themes tab (the first time it will back up the default theme),
Click the new theme then apply,
Restart touchflo.
Alternate for creating themes from skin CABs:
Run M2DC first, let it make the DefaultThemeBackup.m2dct file, Close M2DC.
Run the CAB skin of choice.
Rename DefaultThemeBackup.m2dct to OriginalTheme.m2dct (or anything else with same extension).
Rerun M2DC. It will detect no DefaultThemeBackup.m2dct and will ask to back up again. Let it make new backup. Close M2DC.
Rename new file to the name of the new theme.
Repeat for each skin CAB you wish to convert to m2dc theme file.
Note: The M2DCT files can be large (over 3Mb, 660 files backed up). Best to do this only if M2DC is installed on a large Storage card.
Note 2: Several times M2DC appeared to freeze when applying or backing up themes. It looks like it has problems if touchflo is not off prior to running. It does try to deactivate touchFlo then reactivate when done, but it doesn't appear to work flawlessly yet. It is better to deactivate the Today plugin before running M2DC on this ROM build.
__________________
This mirror pretty much has all roms from version 7.0 - 7.7 which is the most current.
http://www.evolvers.net/Herald_Roms/
Here is one link that has some pretty useful items in it also:
http://forum.xda-developers.com/showthread.php?t=341867
thanks to all of the developers and cooks on XDA for without you guys none of this would be possible

CDMA Shift Phone

I am posting this info because I need some assistance in getting it to work perfectly I was hoping some of you out there may have some additional insight! thank you
Known Bugs/Issues
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
HTC SHIFT FULL PHONE
I don't think it is currently need but I have also inclued the hardsspl for CDMA
Be careful with the RealVGA bit if you haven't got an English machine - I have so I couldn't test this bit - I inferred the solution from one of Daniel's posts.
1. Reset SnapVue if you have been hacking it.
- Run Clearstorage.exe (or Settings, Clear Storage)
- Disable Wi-Fi in Vista (Communication Manager)
- Enable Modem
2. Get Access to WM6
- In SnapVue, click Outlook E-mail
- Click Menu,New
- Click Menu,New,Insert Picture
- Where it says "My Pictures", click and navigate to "Windows" directory
- Highlight (using arrow keys) the "Start Menu" directory and copy it (using ctrl-c)
- Navigate into "Settings" directory in "Windows" and paste (ctrl-v). Ignore the calendar error.
- Click Ok and go back to SnapVue.
- Click Settings button and then "Start Menu, Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Using "Tools, Folder Options" (alt T,O), click on the View tab and make sure that "Hide protected operating system files (Recommended)" is NOT enabled.
- Copy "RegistryEditor.exe" to "Pocket_PC,"\" directory.
- Still on Vista side, Using "Communication Manager", Click "Advanced Settings" and then "Reset Snapvue". Click OK.
- Switch to snapvue and wait for it to start up. If you miss the warning to allow running "RegistryEditor.exe", don't worry - click setting, Start Menu, Programs, File Explorer, then navigate to Windows, StartUp and run it from there.
- In RegistryEditor.exe, navigate to HKEY_LOCAL_MACHINE, Services. Delete the "SnapVue" entry. Click and hold the "SnapVue" entry until the context-sensitive menu appears, then select delete.
- Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
- Close RegistryEditor.exe.
- In File Explorer, delete the PKG.exe and BlockTitleBar.exe files from the Windows\StartUp directory.
- Switch back to Vista and reset snapvue from Communications Manager's Advanced Settings.
- Switch back to SnapVue. When it has finished starting up and you have closed RegistryEditor, you will notice that you have the start menu at the top left of the screen.
- Tidy up - reset and delete "Start Menu" from the "Windows, Settings" directory
Pat yourself on the back! You have successfully converted the HTC shift's SnapVue to WM6.
2a. Enable all the hidden "Today" items
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- In Vista, install and run ceregedit_setup.exe
- Press F1 to connect to WM6
- Use Tools, Unlock Registry to enable the import
- Use Edit, Import to import "today.reg". Ignore any errors.
- Close ceregedit
- Switch to WM6
- In "Start Menu, Settings, Today, Items", pick the today items you want to display.
3. Change the display resolution to 96 dpi (BE SURE THAT THE CHECK BOX FOR DISABLE PHONE SKIN IS CHECKED)
A word of warning - this version of RealVGA is English and does not work very well with non-English systems.
- If you have a non-English version of the Shift, then you will not have a directory called \Windows\StartUp. Before doing the rest of this section, you should create a "StartUp" directory in your Windows directory and copy all of the files from your language equivalent of StartUp.
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Copy "RealVGA_11.CAB" and "ResPack96dpi.ARM.CAB" to "Pocket_PC,"\" directory.
- Switch over to WM6
- From File Explorer (Start Menu, Programs, File Explorer), navigate to the top directory (using Up button as necessary)
- Install RealVGA_11.CAB accepting the security warning
- Install ResPack96dpi.ARM.CAB accepting the security warning and select ok to restart the system
- Run RealVGA from Start Menu, Programs
- Change to 96dpi and press OK and wait while the system restarts
- Tidy up - Using "Start Menu, Settings, System, Remove Programs" remove WM6_RealVGA (its job is done)
- In File Explorer, delete the 2 CAB files.
hkey_local_machine\system\state\phone
block voice MO call Change Registry from 1 to 0
CONGRATULATIONS!!!!!
Voice Calls are now enabled with working mic and speaker through headset also speaker phone works
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
Side Note: you may want to also adjust these entrys as well
these will give you access to the phones menu options
hkeylm\software\oem\phonesetting
change all keys that begin with hidden from 1 to 0
hkeylm\controlpanel\phone
delete the Redirect key
Here's a link for everything you need
http://rapidshare.com/files/236022979/CDMA_Shift_Phone.rar.html
http://rapidshare.com/files/210940637/CDMA_Shift_Phone.rar.html
'This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.'
Link is down. Only ten downloads till it expired. Please post to a premium rapidshare account or send the download link again and I will post for you.
link has been updated
cybericebyte said:
link has been updated
Click to expand...
Click to collapse
Thanks much, downloading now !
Trashed Snapvue
I ran the CustomRuu from the zip file you posted, and managed to get into a loop where Windows Mobile will not boot. I can get into the bootloader with tools I downloaded on XDA, but have not found a ROM that will install without an error. Do you have a CDMA compatible ROM or even the original ROM that comes with the device. Will dive into the box to see whats on the disks next.
Need help though.
the orginal rom should be included in the zip folder
ShiftCDMAFLASH is the folder that I flashed (successfully) that left me in bootloader (three color screen).
RUUNBh is in the upper middle of the screen
CLI 0200
SPL 0.14.000
appear below, and USB in a white box appears below that.
The ShiftCDMAFLASH.zip file contains a different nbh rom file from the folder above, but I cannot get past 0% on the loader screen. I have used ecshift.exe -bl to get back in bootloader mode and hard resetted the Windows mobiel side, but no luck yet. Any suggestions ? +
just give it time
The 0.19 nbh file give a 262 error
On the other hand I can flash the 1.14.651.1 Rom with no trouble but I reboot (even after a hard reset) into the tri color screen with USB on the screen as listed above. Stalled in this mode.
Any other options ? or roms that might work. The GSM roms on XDA also crash out so I am locked in the 1.14.651.1 bootloader mode.....grrrr.
Is there another option I am missing ? I also tried the Snapvue reset program for Vista from the HTC website
Snapvue Software version 1.14.651.1
Snapvue Software version 1.14.651.1 is the one that I installed on my CDMA shift and now cannot get out of bootloader screen (tricolor) despite hard resetting the WM side. I am able to reflash the above listed rom with no errors. But still end up in the bootloader screen.
No other posted rom on XDA will load (probably due to GSM/CDMA differences). Do you have an alternative CDMA rom I could use or is there a way to get out of the bootloader and force WM to load that I am missing ?
use mtty should be posted on site
Used mtty
Thanks. I had been usimg mtty. I can successfully hard reset but WM boots back into the tri color bootloader screen following hard reset. lol. Still stuck. Thanks for the suggestion though.
now do ecshift mode 0 then mode reset
cybericebyte said:
now do ecshift mode 0 then mode reset
Click to expand...
Click to collapse
Thanks, I have been doing all of the above. Restarts into the tricolor screen. I can reformat with the rom you provided. Still tricolor on hard reset. Something in the rom is preventing wm from loading. Anything else left to do ?
I am probably going to need to give up. The snapvue side is toast. Unless there is someone with the original CDMA Rom out there willing to post online (even HTC) I do not think I can make this work.
Original CDMA ROM
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps
rafaelc said:
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps
Click to expand...
Click to collapse
Quick response thanks. Will try it out today and post my results. I did download and reupload to rapidshare. Here is the link.....
http://rapidshare.com/files/2374198....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
I hope CMONEX is okay with that.
Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.
nmhusa said:
Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.
Click to expand...
Click to collapse
Excelent!
you are right, but that kind o things is part of the learning process
Thanks again for all the help.
Also managed to fix the Font sizes in Snapue via registry edits so that they increase in proportion to the scaled screen resolution with RealVGA. Until I figure out how to HardSPL the CDMA Shift and cook a custom rom, this will have to do.

Categories

Resources