Hi all.
Because in Portugal, garanty of devices are made by the rom they had when are bought, have dumped a rom from a 9090, bought in 8/6/2005.
Made a dumped rom with the instructions taken from wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Will upload to FTP as ROM_9090_WWE_portuguese.
Devices says:
ROM Version 1.40.00 WWE
rom date: 03/10/05
radion version: 1.12.00
protocol version: 1337.42
extrom version: 1.40.148
Hope MDAIII will update wiki, cause there are some carrier cabs from TMN.
Moved file from uploads
Renamed File
Renamed thread
Opened New Dumped Rom page on wiki
Linked file
File can now be found under:
ftp://xda:[email protected]/DUMP_QTEK_14000_148_12000_portuguese.rar
Hi there,
I'm a newbie to the forum and I've seen this ROM update to portuguese language.
I've been to the wiki blueangel forum but couldn't find anything to assist me in the update procedure, because the decompressed rar file show only one file named "XDAIIs.nb1" and no other kind of software to transfer it to the Qtek 9090.
Does the file needs to be changed into another type, or can it be splitted ?
Thanks is advance.
Best regards.
Did you think of reading the instruction on wiki that are in the link of the first post.
How to Restore
Insert SD Card to XDA IIs.
Enter to Bootloader Mode by press Power + Record Button and Soft Reset Pictures Here
There will be question, asking for dump ROM from SD card or not.
How to store SD Card data to PC (Must have SD Card Reader) inorder to use SD card for other purpose.
Download ntrw.exe
Copy ntrw.exe to C:\
At Dos Command Prompt goto C:
Type ntrw read XDAIIs.nb1 E: file XDAIIs.nb1 is the rom name (actually you can assign any word) and E: is Drive of SD Card Reader
You will see file name XDAIIs.nb1 at C:
Then you can format SC card, that's all.
How to write saved rom file to SD card.
Type ntrw write XDAIIs.nb1 E:
Need some advice
Anyone has tryied this rom, i have downloaded from the site but i dont know if it works, iam portuguese so if anyone had use this rom please say it.
Thank you
Related
Hi, I put the I-Mate 1.40 WWE on my XDA IIs they other day. I'm just trying to over-write the BTWizardprofiles.dll file to allow my PDA to use an external modem. I have found that all the dll files in the windows folder are write protected and hidden! Anybody got any ideas on how to over-write this file. I tried removing the BT tray link from my startup folder, just incase the file was in use.
ROM 1.40.00 WWE ( the latest Imate rom from the FTP site)
ROM Date 03/10/05
Radio 1.13.00
ExtRom 1.40.176 WWE
Just to add a bit more....
I've done some reading and mucked about with un-hiding the extended rom. This is not the same thing. The files that are locked are the dll files in the windows directory, specificly the blutooth dlls that you over-write with a different version that allows you to use external bluetooth modems.
Try grabbing a demo copy of Resco Explorer -- it'll let you change the R/O & hidden properties on any non-ROM file.
Thanks, I tried that. It says the file is a rom file amd won't let me delete it. I found a different way of doing it. I down loaded a cab from www dot azukla dot com slash bt3900dun.bat
So, Im still trying to work out why, with o2, everything works but with 1.40 pda2k software, the windows dlls are marked as rom files
My Qtek 9090 Dead after or in time flashing
I try .....
1. Flash with NO_ID
2.TRy via romupdate and nb1-file
3. Try via I-mate and T-mobile roms includes NO_iD
and nothing... only dark screen and USB or Serial string......
HELp plz.
...... and IF I insert in it SD card string serial no change after put him in cradle.....
What you can try.
if you have the seral message on your screen then just replace it in cradel and rerun the no_id application.
Are you SURE that you are using a valid ship.exe file and that you have extracted all the files and are following the upgrade instructions for 1.42 as per wilki.
MDAIIIUser said:
What you can try.
all THAT MAY BE
if you have the seral message on your screen then just replace it in cradel and rerun the no_id application.
Yes try, i start no_ID (with many roms) and 9090 waiting 20-30 minutes after this connection error
Are you SURE that you are using a valid ship.exe file and that you have extracted all the files and are following the upgrade instructions for 1.42 as per wilki.
Yes I extract all files , I try many ROMs for I-mate , Qtek , T-mobile in various version ..... I try make SD-Card with dump of rom,......
Only one that i cannot see How Update 9090 from SD to ROM or how copy dump of the ROM from harddrive via MTTY to 9090
This`is Unreal I work with PDA 3,5 years ago but look this bugs first ........
Click to expand...
Click to collapse
We have had a few (very few) that were not able to do an upgrade form thier pc. Not sure if this is a USB issue or software but after all the suggestions that we gave these people and none of them worked all they had to do was move over to a different pc and it worked.
So we know that the wiki 1.42 upgrade page works, that the file works and that the instructions are correct. Best for you is to try a different pc.
I have a nk.nbf + ms_.nbf + radio_.nbf. How can I write this files to my SD Card.
Tnx.
I think you need some tools:
- BaUpgradeUt.exe
- HTCRUU.dll and HTCRUU.conf
- xda3nbftool.exe
- SetOperator.bat or editfix.bat
please refer to http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
if you need explanations.
Hope this help... :roll:
I havn't a cradle !!! I have only FLASH CARD !!! Only flash ! How I can run program from flash?
I runned a "EnterBL.exe" and now I have only "serial" text on my PDA. In my ****ing country I havn't a shop where I can by a cradle.
Whoa... calm down there. I'm not sure that you can even flash from any sort of extending memory..
Try this:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=151
in the end of 1st topic
good luck
I did see this topic. I havn't a work rom on pda How I can write flash to SD Card from PC ? And then boot.
Oh Boy,
just read the topic #1, its all in... :shock:
all you need is a PC with Card Reader, this tool : http://files.pdamobiz.com/ROMs/XDA/ntrw.rar
a Rom Dump (image) with ending *.nb1 for your Device (just search this Forum, its there)
or here:
ftp://xda:[email protected]/Vodafone_VPx_1.22.nb1/Vodafone_VPx_1.22.nb1
and here:
ftp://xda:[email protected]_Updates/OrangeUK_1.40_ROMDump_040805.rar
and here:
ftp://xda:[email protected]/DUMP_QTEK_14000_148_12000_portuguese.rar
- Download ntrw.exe
- Copy ntrw.exe to C:\
- At Dos Command Prompt goto C:
- Type - ntrw write RomDump.nb1 X:
file RomDump.nb1 is the rom name (actually you can assign any word) and X: is Drive of SD Card Reader
- Now, the Rom Image is on your Card - you don´t see it in explorer !!
( don´t format your card now, as windows ask...)
Plug your Card in the Device, go into BootLoader Mode and wait a view seconds.
The BootLoader will ask you what to do.
Flash your Rom and HardReset the Device...
Worked perfect
good luck
sorry about my english
did anybody make the tuma ROM to flash from SD card ???
OK !
Greate TNX.
Now I have a "section=3" error
I think that Land ID error. How I can patch my XDAIIs.nb1 file ?
I have a O2 XDAIIs device.
i have downloaded the portuguese rom above ,it has 2 file radio.nba and os.nba,now when a try to write them to an sd card with ntrw.exe i get thi error,{could not lock xxx.nba---access is denied}
i also have noticed that everyone refers to files extencions like nb1 where this rom comes with nba.could someone please help thank you
I'm completely new to all of this....so forgive me if I posted this in the wrong spot, or the answer is posted somewhere (I already looked around for the answers, and didn't find them).
I want to upgrade my Blue Angel to the new ROM....and there are a couple things in the instructions that I don't understand how to do:
1) "Resize your Extended ROM to 128KB and your Storage ROM to 60MB. You will use your SD card as a replacement for your EXTROM."
2) "Modify the operator in the ROM as needed:
* Determine your operator Information e.g.: "T-MOB101", or "Vodafone", or O2. See GetDeviceData.
* Open a command prompt, go to the folder where the ROM file resides (nk.nbf) and execute: SetOperator ???"
With the second one, I've already used GetDeviceData to find out that my operator is "XGULA001".
Edit: Another question that I have.....is Windows Media Player 9 included on this when I install the ROM? (if not, will I be able to install it later?)
Please someone answer, I know that someone has to know how to do this.
1. Modify the operator in the ROM as needed
Open a command window and execute: SetOperator ????
- Replace ???? with your Operator Information
- i.e.: T-MOB101, or Vodafone, or O2, or ...
I have no idea what I'm suppost to do, but I do know what my operator is.
read section 'How do I find out what my device configuration is before upgrading?'
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
download and extract the file i uploaded, copy nk.nbf over the extracted director. launch your dos prompt, nagivate to the extracted directory, and run SetOperator.bat.
example: SetOperator.bat O2ASI001
where O2ASI001 is the operator code.
hope it works.
imatrix
Thanks, thats the program that I needed......but now I have another problem.
When my BA is in bootloader mode, I can't update because the updater doesn't recognize the BA. When I try updating out of bootloader mode, the updater recognizes it at first..,...but when I start the update it goes into bootloader mode again, and it stops recognizing the BA so it can't update.
What can I do to solve this problem?
what error did u get?
Remove SD Card
Make sure you remove your SD card before you start the flash program. I have noticed the same problem if my 4gb SD card is still in the slot. After upgrading, you return the SD card in the slot and reset the device so the EXT-ROM directory can be read.
Thanks, that fixed the problem.....but now I have yet another problem.
The phone won't work, and I can't connect to my operator.....how do I connect to my operator? (My operator isn't listed anywhere on the BA)
Hey guys!
My question is how to upgrade from Hemli v.1.2 to 1.3 if I´m not able to see \storage folder, where I normaly put the Extrom folder (including cab.files).
I can only see the virutal drive named \RAMDISK.
Can anyone help me?
extrom folder should be on Storage Card, if you do not have one then you can flash the rom, and later to copy extrom folder to your device and run autorun.exe manually