Related
There seems to be a problem with the Kaiser. After finishing a phone call on the Kaiser the backlight goes off and stays off and I cannot access the Start menu. I can access all other functions but backlight stays off and one still cant get into the Start menu from anywhere on the screen. I have to press the power off button quickly once and then wait a second, press it again to be able to access the start button or the light to come on. This is definitely a bug in the tytn II and I hope HTC is doing something about this.
I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...
sudo009 said:
I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...
Click to expand...
Click to collapse
I noticed this as well...
pretty crazy.
Hmm I haven't that problem. Danish HTC TyTN II
Do you folks have the password set? I have heard that that can cause this problem. Try to turn off password checking.
Hi @ All, any news about that problem?
I have a solution
I had the same problems and after installing all the ROM's and still have the same problems, I found out that the problem is not in the ROM it is in the 3G network, disable the 3G network and set it to GSM and all the problems will disappear.
This was nothing to do with 3g.
It was a pre-programmed fast sleep setting that was flawed. Download Kaiser Tweak and turn off all the sleep during call options.
Difference in memory in use
I have problem with my TyTN II, I donĀ“t know why, but when I control the state of the memory in use, it seems to be 112 MB in use and 19,4 MB free. But when I control every item (Applicationdata, Confimgr, ProgramFiles etc., even including hidden files) and calculate total then it seems to be only 45 MB in use. Can anyone explain this
thanks
So i just got the Tilt last week. Been using it every day and would say that I am in pretty good understanding of how it works.
My understanding:
Screen dim is set to 10seconds - Meaning after 10 seconds of no use screen will dim (wont be as bright) this works perfectly every time
"Turn off divice if not usef for 1min" - From my understanding it should turn off the screen after 1 minute of no use and shouldnt come on unless I press the power button on the right.
This is where I am having issues. It wont turn the screen off.. it just stays at dimmed.
First let me explain how i have the phone set up since I think it has something to do with that.
I use it for phone calls, email (through Exchange), and text messaging.
Ive tested it a couple times and the screen turns off just fine if I have direct push (email feature) turned off in the Comm Manager.
However with the Direct push ON it seems to not wanna turn off... just dims.
At first I thought... well maybe it cant get email pushed to it if its turned off... but nope, if I manually turn the screen off (by pressing the side button).. and email myself.. sure enough the phone comes out of the turn off state and tells me I got an email... same deal with texts.
So I am dumbfounded. What is not letting it turn off the screen? The only thing that is running in tast manager is ActiveSync.
Thanks in advance for any help
Where do you leave your 400$+ device that it is unattended for over a minute? Mine is out, on, check mail, off, back in pocket.
it has nothing to do with being unattended... i just feel like i should be able to..
Pick it up -> Turn on -> Glance for new emails -> Put it back down.
Without having to turn off the screen every time... seems like it should do that on its own.. otherwise it would be kind of pointless to have that auto turn off after 1 min function.. right?
So... since that function is there.. and its not doing it.. that means something is wrong. so im trying to figure out what is wrong.
It could be a lot of factors so its going to be time consuming to find the exact cause of the problem. Not sure if your willing to hard reset the device to attempt troubleshooting from a hard reset with no other programs installed to rule out the ROM itself your using or if its third party software or possibly other changes/tweaks you might have made.
I know it works as it should for me with the Q-Mobile 1.2 ROM. Both the dimming and device power off setting work fine. And I have Push email enabled so activesync is always connected.
tyeo098 said:
Where do you leave your 400$+ device that it is unattended for over a minute? Mine is out, on, check mail, off, back in pocket.
Click to expand...
Click to collapse
Some of us have a life...
I have the same issue... stock ATT rom, with lots of stuff on it. I'm pretty accustomed to using the power button to turn off the screen when I'm done. All 3 tilts I've had have this issue. I know it also happened running the stock HTC rom.
I am interested in a solution if anyone has any ideas.
I believe I had the same problem. There are two places to change the dim settings. One setting is under:
Settings\Systems\Power\Advance
Another is under:
Settings\System\Backlight\BatteryPower.
At that point I would make sure all these numbers match up that way you know it will dim and shut off at the correct time. One time is to dim, the other is to shut the screen off. Hope were talking about he same problem, and see if that helps.
Punker1234 said:
I believe I had the same problem. There are two places to change the dim settings. One setting is under:
Settings\Systems\Power\Advance
Another is under:
Settings\System\Backlight\BatteryPower.
At that point I would make sure all these numbers match up that way you know it will dim and shut off at the correct time. One time is to dim, the other is to shut the screen off. Hope were talking about he same problem, and see if that helps.
Click to expand...
Click to collapse
This works for me, I set them all the same and the screen dims and turns off.
Thanks much!
xconradx said:
This works for me, I set them all the same and the screen dims and turns off.
Thanks much!
Click to expand...
Click to collapse
Welcome. I had the same trouble, as I was irritated that the screen would shut off at 1 minute. Sometimes programs or installations take longer then that and with Wifi it can disconnect. Glad I could help.
The problem is related to Activesync and Exchange direct push.
I had the same problem. As long as Activesync is connected to Exchange the phone does not enter standby.
Try disabling direct push and kill activesync and then see if it works.
I had to configure activesync to check for mail every 30mins instead of direct push to work around the problem.
If anybody has direct push and standby working please let me know. I'm sick of this workaround.
--
Titan00
titan00 said:
The problem is related to Activesync and Exchange direct push.
I had the same problem. As long as Activesync is connected to Exchange the phone does not enter standby.
Try disabling direct push and kill activesync and then see if it works.
I had to configure activesync to check for mail every 30mins instead of direct push to work around the problem.
If anybody has direct push and standby working please let me know. I'm sick of this workaround.
--
Titan00
Click to expand...
Click to collapse
Excellent.. changing the setting in both of the places mentioned above to 1minute fixed the issue.. now i have direct push and active sync on.. and it turns off after 1 min yay
Just curious, anyone have any problems with their screens turning back on after being off? I'm pretty sure this is related to my check email interval. Its not a problem for me anymore since I've been using slide2unlock, but before then Id pull my device out and all kinds of programs would be running...but I still get awakened in the middle of the night by a bright screen if I do not put my phone face down on my nightstand.
titan00 said:
The problem is related to Activesync and Exchange direct push.
I had the same problem. As long as Activesync is connected to Exchange the phone does not enter standby.
Try disabling direct push and kill activesync and then see if it works.
I had to configure activesync to check for mail every 30mins instead of direct push to work around the problem.
If anybody has direct push and standby working please let me know. I'm sick of this workaround.
--
Titan00
Click to expand...
Click to collapse
No problems here. I'm using my own ROM however.
ajmoncrief said:
Just curious, anyone have any problems with their screens turning back on after being off? I'm pretty sure this is related to my check email interval. Its not a problem for me anymore since I've been using slide2unlock, but before then Id pull my device out and all kinds of programs would be running...but I still get awakened in the middle of the night by a bright screen if I do not put my phone face down on my nightstand.
Click to expand...
Click to collapse
I've had that. Mine's related to SPB backup which runs at 3AM. Also, pressing any key brings this device out of standby as opposed to my Hermes where only the power button would do this. I don't really like this "feature" much as I now need to have keylock enabled to keep the phone from waking up.
Sleuth255 said:
I've had that. Mine's related to SPB backup which runs at 3AM. Also, pressing any key brings this device out of standby as opposed to my Hermes where only the power button would do this. I don't really like this "feature" much as I now need to have keylock enabled to keep the phone from waking up.
Click to expand...
Click to collapse
Hi:
I hope I understood your issue correctly.
If you want phone to ONLY wake when you push the power button, you need to go to Start/Settings/System/KeyLock There, select the first option, which is lock all buttons except power button.
titan00 said:
If anybody has direct push and standby working please let me know. I'm sick of this workaround.
--
Titan00
Click to expand...
Click to collapse
As stated in my previous post I have Direct Push and Standby works correctly for me. I'm using the Q-Mobile 1.2 ROM.
Chrushev said:
Excellent.. changing the setting in both of the places mentioned above to 1minute fixed the issue.. now i have direct push and active sync on.. and it turns off after 1 min yay
Click to expand...
Click to collapse
PsyOpWarlord said:
As stated in my previous post I have Direct Push and Standby works correctly for me. I'm using the Q-Mobile 1.2 ROM.
Click to expand...
Click to collapse
That is really strange. I'm using Dutty V3 and just tried activating Direct push. Setting Backlight and power timeout to one minute. After leaving the device for one minute the screen dims but does not enter standby.
If I kill activesync it does enter standby but Direct push stops working.
--
titan00
So I had some water damage to my tilt. At first it would only boot to the tri-color screen after I dried it. Now it fully boots but when winmo opens it says that the sim door is unlocked and it will turn off in 10 seconds. htc home is running in the background, and sometimes, for a few seconds it connects to activesync, then the phone turns off. I also noticed that it connects to winamp when the phone is off and just plugged into the usb.
I'd like to think that reloading the ROM would fix this. Is there a different way to load ROMS? Does anyone have any ideas on how to fix this? I would appreciate any advice. I wouldnt mind waiting for the FUZE but need a phone till then.
hello, i have got a problem with my kaiser, it is tuning off (entering in standby) in 10 s no matter the config than i make
thanks a lot
Oddly enough, I'm having exactly the same problem.
No matter what is running, even apps that are supposed to keep the device from entering sleep (like TomTom, etc.), it always enters sleep after about 10 seconds. What's weird too, is that if I press any physical button on the phone, it resumes from "Sleep" instead of having to push only the power button like you would normally do.
Any suggestions would be appreciated, I have a "AT&T Tilt" Kaiser, and am running a 6.5 rom w/ the eMobile radio.
Hello bro
i found a semi-solution hehehe
starting de audio manager and let it play a part of a music, after that it dont solve all problem but reduce it, some times the kaiser turn off after 2 min as the setting, some times it turn off in 10s
the most strange thing is than the pda never have this problem until today in morning
my rom is a pda-corner wm6,1
thanks
Don't know if it the same problem...
Hi guys got a kaiser bout a month ago and i love the phone haven't done any modifications to it all stock at&t stuff. Having a pretty unpleasant problem... when i go to turn on the phone the at&t logo pops up and then after a couple of seconds turns off, the battery is charged! I seem to be able to turn it on if i open the sim card door and leave it open till the WM6.1 logo appears, but then when i turn it off to put in sim card it turns off in seconds and does not come on. Now when it does happen to stay on for me after its been asleep for a while the touch screen stops working...
all stock kaiser
have done may hard and soft resets nothing seems to be working
don't have sync software
willing to do anything
HELP!!!
maybe you can put a modificated rom, my sotck phone come with wi-fi, internet and e-mail blocked. i put a modificated rom and it unlock all features. its just a try, but dont forget to read all the wiki about the replacement of the rom or you can brick you phone
good luck
i'm also looking for how to change this as tomtom on the move in the car is useless when the phone locks
Hey, i have a Bluetooth problem. When i turn Bluetooth on after 30sec it turns off.
Can someone help me?
First *push*
It sounds like you have a problem with your phone. Bluetooth stays on permanently, and there is no configuration option apart from on or off. Dies it say it is off?
Unless you mean discoverable? I have got a feliing it only remains discoverable whilst you are in the settings screen?
I have the same issue since a few weeks although not that fast.
Bluetooth switches off automatically on my HD7 after a few minutes.
When connecting it to my carkit, it can make a first call without problems, but when finished the call it will switch off bluetooth after a few minutes.
I even now reverted back to 7.0.7389.0 by using one of Ansar's ROMs, but I have again the same issue.:mad
Any one else has similar issues on the HD7? Anyone knows how to fix it?
Could it be something physically broken?
Meanwhile I installed all updates again with Zune, but still the issue exists.
I also have an issue with the WiFi when the issue with BT occurs.
If I try to switch on/off WiFi, the phone hangs for a while, after that he doesn't go to sleep mode no more and it's impossible to switch it off with the Power button.
Only solution at the moment is to take out the battery.
Had it several times now already.
I mailed HTC, and they told me to send in the phone, but I'll need to miss it for 2-3 weeks then