No Sound XDa IIs - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I'm at the point of giving up, ive tried :-
1 soft reset
2 hard reset
3 flicking on/off/on the BT
4 deleting the BT from the start menu
5 updating the radio to 1.12.00 and 1.13.00
Here is the problem
No Sound.. the phone rings, so the speaker's fine. But there are no taps, i cant hear anything, no one can hear me upon answering, when playing media player theres no sound either.
The good news is i get sound through either a BT headset or a wired Hfree kit so its not entirely useless
I've got a XDA IIs PH2OB
ROM 1.31.00 WWE
RADIO 1.06.00
EXT ROM 1.31.139
PROTOOL 1337.38
any ideas other than entering the mobile tossing olympics???

Try insert and re-insert your wired headset. It could be that your device still thinks that it's in headset mode.
It had happen to me with wallaby and older treo.

Yeah i tried that, while using the wired headset and listening to media player i repeatedly plugged-unplugged it. still to no result. sound goes on, sound goes off, sound goes on, sound goes off :evil:

Related

Upgraded to BT 3900, now very low phone volume

I am new to PDAs, so please pardon my ignorance. I recently purchased a PDA2k EVDO (CDMA/Harrier) which was stock standard (ROM 2.03.00 WWE, date 15/12/04, Radio HA01_140, ExtROM 2.03.111 WWE & BT 1.0.0.3500). As my PDA2k didn't have audio BT profile, I installed the BT 3900 stack. I can now hear fantastic stereo music via my iTech BlueBAND headphones but can bearly hear my phone from the same headset. The phone volume is set to maximum without any effect. Before the upgrade, on BT 3500, the phone worked perfectly on this headset but I couldn't play music thru the headset. I have checked in the forums for similar problems but haven't found an answer for this one. Other glitches - the first time I installed 3900, the screen froze. I had to do a hard reset to overcome this and subsequently lost 3900 (to 3500) on restore. The BT signal on 3900 cuts out occassionaly but I get a line-of-sight range of @10m. Please help and thanks.
PS. Great site - I've learned a lot in a short time. Cheers.

Bluetooth

I have a set of the ht820 headphones. When I paid the Tilt with the ht820 everything works fine but if I turn the headphones off and back on the phone does not seem to be able to find them again. Am I doing something wrong? I never had this problem with my 8125.
If I go into the Bluetooth settings and select the options for the ht820 and select set a stereo wireless then it will work but it there no way to have auto detect that?
I also have a set of HT820. My problems sound worse than yours. My music skips VERY BAD!! I'll get 10 seconds of music then 3 seconds of silence. Do you have this problem?!? As far as connection, yea I also have to go into BT settings to get it to see the headphones again...
Thanks
I've got the same experience. As to establishing the connection, same here as it has to be done from BT settings. But I have to do the same thing to establish a connection between the headphobes (Anycom BSH-100) and my notebook. I'm not saying that this is the best way but then the Tytn is not that different from a normal PC.
I do get occasional/regular skipping when playing music/video. I was thinking that it was a problem with my headphones, but now I'm thinking it's a problem with the BT implementation of the Tytn.
Figured a few things out. For the HT820, if I press the button on the right speaker once every few seconds, it kicks on the BT connection without having to go into BT setting on the Hermes 2. As for the sound skipping, I used the Kaiser tweak and changed the bitpool from 64 to 48 and now it only skips once every few songs!! Getting so close to now having a full fledged music player, too!! Yahoo!!

Sound over Car Kit

[email protected]
My Problem:
I have an HTC Kaiser and a Bury Car Kit (without Bluetooth)
yes i know, normally it is not possible to get sound from the mediaplayer, TomTom or Keypad over the bury car kit and the radio, only telephone calls
BUT
Yesterday, I drive to a customer and i don’t know what happens. I have receive a call and after 3 minutes the call was broken and the normal radio goes on. At these times all the missing sound comes over stereo sound to me!
I was so happy, the radio was going mute and tomtom say in stereo quality to me: Turn left!
I try to play mp3s - the radio goes mute - and mp3 coming - IT WORK'S!
I try the Keypad - the radio goes mute again - IT WORK'S too!
And then? after a soft reset the dream was over…. No sounds more…
But now I know its possible to hear all sound in perfect quality.
Have somebody a idea to make it woks for ever?
(my English is very bad, I know- sorry)
Franz

Bluetooth connetion aborts

Hi.
I've a problem with my "old" Diamond^^
When I connect a bluetooth headset to my Diamond and want to listen to my music it works.. but when I use the hardware-keys on my headset (play/pause, skip) it quits the bluetooth connection after 10 to 15 seconds and plays the music loud with the build in speaker. The keys still work but I can't get any music output from the headset. I have to reconnect it to use it again..
When I just use the software buttons (TF3D or WMP) to navigate through my music there is no problem neither.
With my Diamond2 there is no problem. I can listen, and skip and do whatever I want and it stays connected.
Anyone knows how to solve this issue?
[edit]
tryed different roms! Gen.Y, AZTOR, BsB's...
No one has any idea?
[edit] With my Bluetooth Car radio everything works fine. But it doesn't have any button to interact with the phone but the answer call button.. So why did my Stereo headset work with the Diamond1 for month and now acts like this?

[Q] Problem : sound not redirected to BT headset

Hello,
I've got a Bluetooth headset Jabra Clipper for 6 months now.
It's paired with my Diamond 2.
So, when I switch it on, the phone recognizes it.
But when I start playing music (with TouchFlo Audio Manager) the sound goes out of the internal speaker and is not redirected to the BT headset.
I've tried to hard reset the devices, both phone and headset and pair them again without installing and modifying anything, it still doesn't work.
To circumvent the problem, I must make the phone re-discover the headset, pretty annoying !
The problem appeared after I did a hard reset (for cleaning purposes); before it was working properly.
I've called Jabra support and they have no explaination.
They teached me how to reset the headset but it has no effect on my problem.
If somebody has an idea...
Thanks.
Does anybody has an idea about this problem ?
Thanks a lot.
You need this:
http://freewareppc.com/communication/acbtogglebt.shtml

Categories

Resources