Audiovox 6600 CDMA bluetooth headset help - MDA III, XDA III, PDA2k, 9090 Software Upgrading

i currently have the 6600 and i just got the motorola hs820 bluetooth headset. I tried connecting them and my phone doesnt' see the headset. The headset is fully charged and is on.
now my bluetooth rom is 1.0.0.3500, i have read around the net that there is a 1.0.0.3900 rom update out there but i have not been able to find it.
does anyone know where i could find these updates and if this will solve my problem. Thank you

extreme_snoopy said:
i currently have the 6600 and i just got the motorola hs820 bluetooth headset. I tried connecting them and my phone doesnt' see the headset. The headset is fully charged and is on.
now my bluetooth rom is 1.0.0.3500, i have read around the net that there is a 1.0.0.3900 rom update out there but i have not been able to find it.
does anyone know where i could find these updates and if this will solve my problem. Thank you
Click to expand...
Click to collapse
Check the bottom of this page.
http://www.myehud.com/xv6600/bluetooth/
(Via ehud on http://www.ppc6600.com )
Good luck.

Related

BT 4 MP3, one BT headset for 2 phones?

is there a way to listening mp3 from bluetooth headset?
which bt stack is the best?
i was using jabra bt258 and able to connect my old xda2 and xphone into the jabra.. so i could use one bt headset for both phone and connected all the time.
tried with xda2s and xphone2 and nothing like it works.. does anyone try it?
I don't think BT headsets were meant for MP3 playback. It won't work. FYI: i'm using a HP Bluetooth headphones with my IIs.. works fine. Occasional static/cutting depending on where my IIs is, but works for me.
Do a search and you'll find more information on this topic. I'm too lazy to search, otherwise i'd do it for you. :
BT headsets work fine to hear mp3 in PocketPC (non phone edition)
but it doesn´t work in Blue angel (or I can´t manage it)
I don´t know if it works in another phone edition
sorry
has anyone try with 2 handset and using one bluetooth only?
bluetooth headset for MP3s
just bought the XDA IIs, and upgraded the rom via the O2 website. I previously had the 6315, which sucked BUT it had the A2DP audio profile for bluetooth. A previous user described the fact that they own an HP headset and were able to listen to MP3s on the IIs. Previously i was able to do so on the 6315 w/ the jabra BT250. I want this ability on the IIs, how did you do it? Please be specific, and talk as if you're talking to a complete novice (YOU ARE, LOL). Thanking you in advance!
Re: bluetooth headset for MP3s
Any one got a follow-up for the problem?
Richie_XDAIIs_NYC said:
just bought the XDA IIs, and upgraded the rom via the O2 website. I previously had the 6315, which sucked BUT it had the A2DP audio profile for bluetooth. A previous user described the fact that they own an HP headset and were able to listen to MP3s on the IIs. Previously i was able to do so on the 6315 w/ the jabra BT250. I want this ability on the IIs, how did you do it? Please be specific, and talk as if you're talking to a complete novice (YOU ARE, LOL). Thanking you in advance!
Click to expand...
Click to collapse
do a search of XDA forums - i'm pretty sure it's been discussed.
my only concern is how efficient is this all going to be... don't know about headset, but the phone battery WILL crap out after a couple hours of BT usage... unless u have it cradled in a car or something...
I did some research last night but didn't find out the solution
I have a moto hs850 handfree.
how to use it for listening mp3?
It seems I have added 'A2DP audio profile for bluetooth'
but in the profile 'use hands-free for:
here only shows Telephone calls
is it right? I assume it should be have more option for me to choose
starik said:
do a search of XDA forums - i'm pretty sure it's been discussed.
my only concern is how efficient is this all going to be... don't know about headset, but the phone battery WILL crap out after a couple hours of BT usage... unless u have it cradled in a car or something...
Click to expand...
Click to collapse

Blue Angel - A2DP Bluetooth

Hi all
I have got Blue Angel:
ROM: 1.42.00 WWE
Radio: 1.13.00
BT: 3900
Last week I upgraded to the T-Movbile 1.42 Rom. I then installed the A2DP profile patch and was amazed that my Omiz OMS600 headphones were actually working using the high quality audio profile, and they were working very well.
The other day I did a hard reset to sort out a few things and left it at that. Later on when I came to reinstall my A2DP it wasn't working, nor was using the headphones as just a normal headset. I tried all sorts, including downgrading my ROM because at that point I was wondering whether or not it was actually on a previous version that I had it working.
Anyway... eventually I decided it was the headphones that had an error so emailed Omiz who were very helpful and sent me the download for their firmware flashing utility. This upgraded the ROM of my headphones from 1.06 to 1.25. I can now pair my headphones as a headset but not as High Quality Audio. I can get it to add a High Quality Audio shortcut in BT manager but when it trys to connect it says: "connection failed". Before it was also saying "service unavailable on device" or somthing similar.
Any assistance would be good.
Thanks a lot.
s_t_harvey said:
I then installed the A2DP profile patch and was amazed
Click to expand...
Click to collapse
Can you, please, tell me where to find this patch?
Someone knows if it works for wm5??
Thanks!
A2DP & WM5
Hi there,
I got the patch from: ftp://xda:[email protected] Upgrades/BT profiles for build 3500/
But I'm not sure if it will work on WM5, I think I have read that it will not, this is my main reason for not moving to WM5 yet... although at the moment while i can't get A2DP working I am not much better off.
How are you finding WM5? Is it reliable enough to compete with WM2003 yet, or is there still a bit of work needed?
It doesn't work under WM5. WM5 has a Microsoft bluetooth stack, this patch does not apply.
WM5 on the BA is quite stable if you have the time to work with it. I am not going back. If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
A2DP on WM5
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Re: A2DP on WM5
s_t_harvey said:
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Click to expand...
Click to collapse
Yeah I think so. Apparently it's not out in the wild yet, but w/ BT 1.2, a lot of people will be looking to do more with it.
shuffle said:
WM5 has a Microsoft bluetooth stack, this patch does not apply.
Click to expand...
Click to collapse
Did you mean: "the mamaich rom has microsoft bluetooth stack". I really hope we can get WM5 with the same stack I had on w2003. (Broadcom, I think). Maybe it is out there but I can't see it...
shuffle said:
WM5 on the BA is quite stable if you have the time to work with it. I am not going back.
Click to expand...
Click to collapse
I agree. By the moment, I'm very pleased with the performance of WM5 on my BA. It actually runs faster than w2003! And I'm beeing very objective, believe me!
I'm having a big annoyance with writting (sms, word, etc) as the spelling isn't allways what I wrote. On the SMS window, it seems the screen gets redrawn all the time and it loose some words...
The other big is not having A2DP. I think is very frustrating having such a nice machine without a good software that makes all its goodness work! :?
Some delayings on the screen repainting and (I'm using Pocket Informant) slow performance on the everyday tasks as opening the contacts list, or changing toanother program, for example...
shuffle said:
If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
Click to expand...
Click to collapse
What do you mean? To have the BT on a low-power mode more or less?
cheers...
looking 4 answers: ad2p & bluetooth & wm5
somebody with an answer to this theme?
WAS: ad2p & bluetooth & wm5
It is somehow possible?
Anybody there? :roll:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
shuffle said:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
Click to expand...
Click to collapse
some URLs????
Thanks!
How do I enable A2DP on my BA??
Hello!!
I have searched the forum many many times and visited wiki, but I could only find 2 threads which is close to what I need to know. This is 1 of them.
I have got Blue Angel:
ROM: 1.40.00 WWE
Radio: 1.12.00
BT: 3900
This configuration came from the recently rom upgrade from o2.
It seems to me that it's possible to enable A2DP on a BA running on WM2003 SE, which allows me to stream music to a bt headphones??
However I just could not find a thread which has an instruction on how to do it. Not even on wiki. After reading some threads, I came to my own conclusion that I need to upgrade me BT to build 3900 and install a patch??
So this was what I did,
Since my BT is already 3900 "offical" version, thus I didn't do anything to it.
I d/l this file BA_OEM_AudioGW (1.33g.00).CAB (83KB) and ran it on my PPC. I then got the audiogw.dll in my windows folder.
That was all I did. It didn't work of course. I have another file, BroadcomCorp_BT1.0.0.3900.cab but didn't use it as I'm already on 3900??
So I was just hoping that someone who has done it and was successful, could point me in the right direction!!! Thanks a lot!!!
anyone tried running both cab loacted at
ftp://ftp.xda-developers.com/BlueAn...age BT 1.0.0.3900 and audiogw.dll - 1.33g.00/
if it works, do let me know. I currently do not have a bluetooth headphones to test with.
I have Omiz headset (with MP3 and radio FM) and due to work with my Magician I had to manually change some registry entries. Point was that my PDA was not correctly identified as a A2DP device (only HF). I paired my PDA with normal BT dongle with A2DP profile, found registry entries with dongle mac adress and copied manually keys coressponding with a2dp service to folder with my headphones profiles. After all that it was possible to chose headphopnes in BT menager as stereo audio receiver.
Maybe its similar and u should look in registry...
jarekt, can you post those registryvalues please?!
Can't get streaming audio to BT headphones
I still have had no luck with the BA_OEM_AudioGW (1.33g 00) Cab or any registry settings under WM5.
BT a2dp WM5
have you tried the file (.cab) i uploaded in BlueAngel under uploads, it let me pair BT Stereo under wm5. Nevermind I looked someone deleted it dont know why. PM me and i can send if you want, I tried to reupload but Uploads appears broken.
I am on thesame situation of errorist.
My machine is on Broadcom 3900, and I want to make A2DP work.
If anyone can shed a light on how to make it work, I'd be very very grateful.
BTW, I have a Motorola HT820.
UPDATE:
I have installed the 3900 stack + audiogw dll even though I had a factory-installed 3900 stack, and I managed to connect in handsfree mode.
I still have not found out how to connect in A2DP mode though...
Any help is appreciated.
Hi All
I dont know how useful this is going to be, but i spent ages doing research to get my ht820 and my 02 xda 2s working properly, and when i did, i wrote a semi bad guide here
http://www.corecodec.com/index.php?option=com_smf&Itemid=29&expv=0&topic=2840.0
if its any use i'd be tempted to maybe write it up proper and put in in the wiki, either way, try some of the steps or files ive listed (most of them are from here)
but it gets it working with TCPMP aswell, which is a lot better than WM10 anyhow
good luck
BTW: ivans rom uses the broadcom stack, so the patch may work, however i dont have the headphones to test it with
i've onstalled this two cabs too, but new profile didn't appeared. Bay Be some registry values didn't appied? who did this patch?

Bluetooth Stack problem on Kaiser - automatically re-establishing pair

Hi all,
I have posted this question also over a 4winmobile as I cant access xda-dev from work. Hopefully someone here can help.
I've been having difficulty with my Kaiser and a Parrot MK6000 car kit. I have tested the carkit with a Nokia as well, and have some results to report to aid in troubleshooting.
The Nokia was paired with the Parrot MK6000 kit, answers and makes calls and streams audio no problem. When the car is turned off, the pairing ends, when the car is started again the pairing starts back up ... auto, no probs. In addition, if you make a call with the phone, at the end of the call the pairing is ended, but within a few seconds is re-established.
On my Kaiser, I can pair the phone and car kit, but if the connection is lost (ie the car is turned off or bluetooth is stopped on the phone) and then I turn the car back on, it will not automatically pair. It attempts to, the car kit mutes the car radio and plays a tone, but the pairing is not established by the phone. It continues to do this every 30 seconds or so, but does not establish a connection.
Also, if I make a call with the phone when it has been sucessfully paired, on ending the call, the phone will not re-establish the pairing.
My conclusion is that all of my troubles relate to the fact that the pairing will not re-establish once lost.
Is anyone able to assist? I have upgraded the Kaiser radio to 1.27.12.32 (yes ... just tonite, see http://forum.xda-developers.com/showthread.php?t=349528&page=2) but have also tried radio roms 1.27.12.11 and 1.27.12.17 with no success. The ROM version is 1.81.861.0. Ive also tried installing some of the BT stacks that were developed up for the Hermes with no success. I've also installed Jetware with no sucess.
Getting very frustrated!
Adam
adamcullen said:
Hi all,
I have posted this question also over a 4winmobile as I cant access xda-dev from work. Hopefully someone here can help.
I've been having difficulty with my Kaiser and a Parrot MK6000 car kit. I have tested the carkit with a Nokia as well, and have some results to report to aid in troubleshooting.
The Nokia was paired with the Parrot MK6000 kit, answers and makes calls and streams audio no problem. When the car is turned off, the pairing ends, when the car is started again the pairing starts back up ... auto, no probs. In addition, if you make a call with the phone, at the end of the call the pairing is ended, but within a few seconds is re-established.
On my Kaiser, I can pair the phone and car kit, but if the connection is lost (ie the car is turned off or bluetooth is stopped on the phone) and then I turn the car back on, it will not automatically pair. It attempts to, the car kit mutes the car radio and plays a tone, but the pairing is not established by the phone. It continues to do this every 30 seconds or so, but does not establish a connection.
Also, if I make a call with the phone when it has been sucessfully paired, on ending the call, the phone will not re-establish the pairing.
My conclusion is that all of my troubles relate to the fact that the pairing will not re-establish once lost.
Is anyone able to assist? I have upgraded the Kaiser radio to 1.27.12.32 (yes ... just tonite, see http://forum.xda-developers.com/showthread.php?t=349528&page=2) but have also tried radio roms 1.27.12.11 and 1.27.12.17 with no success. The ROM version is 1.81.861.0. Ive also tried installing some of the BT stacks that were developed up for the Hermes with no success. I've also installed Jetware with no sucess.
Getting very frustrated!
Adam
Click to expand...
Click to collapse
Have you tried these registry tweaks? http://msdn2.microsoft.com/en-us/library/aa915920.aspx
There is a know problem with the Parrot kit and you will find a thread in this forum where a member has contacted Parrrot who replied that they are addressing the issue.
This one my be usefull.
http://forum.xda-developers.com/showthread.php?t=340908&highlight=parrot
NuShrike said:
Have you tried these registry tweaks? http://msdn2.microsoft.com/en-us/library/aa915920.aspx
Click to expand...
Click to collapse
Hi, thanks for that pointer ... most of what is described in that MSDN library isn't in my registry.
Im going to manually insert them all and see what happens.
A
Still no luck
I tried updating the Reg with the tweeks as suggest ... but still no luck. All i get is still the initial pair, but on disconnection, no automatic re-pairing of the device to the car kit.
Im doomed at this stage.
You're not alone. I have the same problem with my Motorola S9 headphones and Microsoft SYNC in my 2008 Ford Edge. Sometimes I have to turn BT on and off a couple of times for it to connect.
agreed
Turning the BT on and off a few times has also be part of my "solution" package.
This really isn't acceptable though. This device should automatically pair up, just like every other BT device does. BT is a protocol that should be adhered to and just work.
I have also tried this on my other WM device. It pairs a little better, but is not great. I've tried compairing the registry values of that device to my Kaiser, but I just dont understand the functionality of the reg settings enough to work out what to change.
Is there some developer out there who can help? This type of problem was experienced by us all back in the early days of the Hermes and this community sorted it out.
Can any developer out there help, like working out a port of the Widcomm BT stack for Kaiser?
a
Interesting. I have a Nokia CK-7W bluetooth car kit and the Tyn II has re-connected/connected to the kit every time. Actually more reliable than my SE K800i. Sorry that it doesn't help you.
Hey Juzzman,
nah, that doesnt help ... but does increase the frustration level!
Seems like you need to have a Nokia component in there somewhere for it to work ;-)
Anyhow, Im still convinced it is a bluetooth stack problem in the Kaiser. I'm going to try flashing one of the AT&T based roms and the other radio version and see what happens.
Cheers
Adam
I've had BT issues with all of my HTC devices, it's very frustrating.
Currently I've got a Kaiser (Orange), E650 (Orange) and a new S730, none of which work on my Pioneer headunit without Jetware.
The Kaiser with Jetware pairs up ok, but the sound is really tinny.
The E650 with Jetware sounds fine, but I can only send 150 contacts to the headunit.
The S730 doesn't pair, haven't put Jetware on it yet.
In the past I've had BT issues with M3100, C600, C500 etc etc.
Why the hell doesn't MS sort out their bloody BT stack!!!
Bluetooth problems
I am having the same problem with my JVC bluetooth unit BT1000. It will pair ok first time, allows me to make 2 calls. Will not the reestablish a connection/pairing. JVC worked fine with my sony erricson and nokia phones. Anyone found a cure to this?
Same problem with the stock AT&T rom (1.27.12.11) with the H700 headset.
Turn bluetooth on it normally sees the headset. If not turn it off and on again to get it to work. Once working it normal looses the connection after an hour or so.
Could it be a BT 2.0 Compliant issue?
I have posted this same problem earlier in xda-deveopers, on htc wiki and aximsite. Many people have viewed and are experiencing this same problem, but no one has posted any solution specific to my problem either. I hope a developer can solve this one for us. Is it a BT stack problem, or a BT 2.0 compliant problem, or a need for an updated ATT ROM to solve this issue? (I currently am using the stock ATT ROM 1.57.. that shipped with my Tilt.)
When I use my Motorola H700 with the Tilt the BT works fine, UNTIL, I use the voice speed dialing from the Tilt. Once I use the voice speed dialing directly on the Tilt, the Motorola H700 will no longer connect. I have to do a soft reset or go through the pairing process again. Once I re-establish pairing again, the H700 will continue to work fine, UNTIL, I use the voice speed dialing on the Tilt. Then we're back to having to do a soft reset to again establish H700 connection with the Tilt.
NOW, I just received a call back from an HTC tech who told me the problem is likely due to the Motorola H700 being only BT 1.2 compliant. He recommended that I try the Motorola H12, which is BT 2.0 compliant, but he could not absolutely guarantee this would solve my problem.
Does anyone know for SURE that the Motorola H12, being BT 2.0 compliant, will solve my problem? Or is there another solution?
Note: I have tried MS Voice Command 1.6 (full version), but the above problem still occurs. I have also tried Jetware, but again, no go. I am not sure that there is going to be an updated AT&T ROM to solve this issue either.
Additional Note: I have also tried other BT devices, such as the Jawbone, and the Plantronics Voyager. All do exactly the same thing as above.
Anyone have any solution? If the Motorola H12 is the solution, that would be great...
Thanks in advance.
I'm having the same problem with my new carkit. Did anyone ever find a solution to this??

can't pair bluetooth headset with Diamond!!

My bluetooth version in the phone is 2.0/2.0+EDR...the address is 00:17:83:d6:27:BA (I dont know if that helps)
Anyway, even with stock ROM or cooked ROM, I was never able to pair up my headset (which I've used regularly on my Samsung U600) to the Diamond. Every time it goes in to do a search, it comes out with "no device found". I don't know whether i have a bad Bluetooth firmware on my phone or whether I should get a new headset to pair it up with. Anyone know what could be the problem?
THanks.
lude219 said:
My bluetooth version in the phone is 2.0/2.0+EDR...the address is 00:17:83:d6:27:BA (I dont know if that helps)
Anyway, even with stock ROM or cooked ROM, I was never able to pair up my headset (which I've used regularly on my Samsung U600) to the Diamond. Every time it goes in to do a search, it comes out with "no device found". I don't know whether i have a bad Bluetooth firmware on my phone or whether I should get a new headset to pair it up with. Anyone know what could be the problem?
THanks.
Click to expand...
Click to collapse
Try to make your Diamond visible to other devices in Bluetooth settings (not active by default when you switch Bluetooth on)- it doesn't really make sense since the Diamond is doing the search and not the headset but it worked for me once when I couldn't find a headset. Hope this helps.

Bluetooth drop-out

Anyone have a problem with their Raphael (assuming it's a HTC Touch Pro) dropping bluetooth (especially headsets)?
I've got two bluetooth headsets and this phone, halfway through a call, at no predictable time will ditch the headset whilst leaving the call active...nightmare.
HTC don't wanna know about it, does anyone else have this trouble and better still, has anyone got a fix for it?
Cheers
T
Yes and actually I complained today to the callcenter of HTC in the NEtherlands. There is no normal way to connect bluetooth to a carkit and many problems with a headset (Bluetrek G2). HTC admits there are problems with carkits and headsets. My TP evne starts to go on and off.A hard reset is my last resort and then I have to send it to HTC...... Good luck. Greetz Ton
ton66 said:
Yes and actually I complained today to the callcenter of HTC in the NEtherlands. There is no normal way to connect bluetooth to a carkit and many problems with a headset (Bluetrek G2). HTC admits there are problems with carkits and headsets. My TP evne starts to go on and off.A hard reset is my last resort and then I have to send it to HTC...... Good luck. Greetz Ton
Click to expand...
Click to collapse
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
It is a big problem for my! Bluetooth connection disconnect after a few minutes (of my car system).
halloj said:
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
Click to expand...
Click to collapse
Original HTC rom or a branded one. The branded T-mobile rom in the Netherlands is good. No connection problems what so ever. So I asked why HTC doesn't copy the T-mobile rom (lol)........
ton66 said:
Original HTC rom or a branded one. The branded T-mobile rom in the Netherlands is good. No connection problems what so ever. So I asked why HTC doesn't copy the T-mobile rom (lol)........
Click to expand...
Click to collapse
HTC unbranded one...which is even more unbelievable.
rinsel said:
It is a big problem for my! Bluetooth connection disconnect after a few minutes (of my car system).
Click to expand...
Click to collapse
Which makes me believe that your car system doesn't have the correct standard.
i need sone help regarding bluetooth
i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
and how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
can you help me?? please.. i've been searching some help for this matter but i have not got any answer yet....
thank you
excelex said:
i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
and how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
can you help me?? please.. i've been searching some help for this matter but i have not got any answer yet....
thank you
Click to expand...
Click to collapse
What hotfix?
halloj said:
What hotfix?
Click to expand...
Click to collapse
hmm i think they (the HTC) name it "Hot fix to enhance WAP security for HTC Touch Pro" ... it's on their website (http://www.htc.com/www/supportdownloadlist.aspx?p_id=140&act=sd&cat=all), but i was not able to install it on my raphael..
but my first priority is to make my bluetooth headset works with my HTC Raphael... can some one help me??
Losing bluetooth connection also occures with the T-mobile Dutch rom. (using original carkit of my Opel/vauxhall Vectra) Bluetooth on mij Vario IV is completely switched off after beeing several minutes connected. No problems with other bluetooth connections.
yes i have been having this problem lately, never had it before though, but all of a sudden it happens now, i will have to power down my headset and power back on in order to re estabilsh a connection
halloj said:
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
Click to expand...
Click to collapse
A hard reset has solved a lot of all my connection problems. I could not believe that this would solve anything but now i am convinced. It really works. Even the GPS fix is now really good (sorry might be off topic).
Greetz Ton
I have a bluetooth carkit from Nokia and have a problem when recieving a call. A outbound call using the carkit is going good but when recieving a call it doesn't use the carkit but the phone.
Who has a solution?
ronald-is said:
I have a bluetooth carkit from Nokia and have a problem when recieving a call. A outbound call using the carkit is going good but when recieving a call it doesn't use the carkit but the phone.
Who has a solution?
Click to expand...
Click to collapse
Are you answering the call with the buttons on the phone, or on the carkit? AFAIK answering with the buttons on the phone will always route the call direct to the phone, and bypass any headset or car kit.
Cheers,
Steve.
StevePritchard said:
Are you answering the call with the buttons on the phone, or on the carkit? AFAIK answering with the buttons on the phone will always route the call direct to the phone, and bypass any headset or car kit.
Click to expand...
Click to collapse
I will try this tomorrow! thanks!

Categories

Resources