Anyone have a problem with their Raphael (assuming it's a HTC Touch Pro) dropping bluetooth (especially headsets)?
I've got two bluetooth headsets and this phone, halfway through a call, at no predictable time will ditch the headset whilst leaving the call active...nightmare.
HTC don't wanna know about it, does anyone else have this trouble and better still, has anyone got a fix for it?
Cheers
T
Yes and actually I complained today to the callcenter of HTC in the NEtherlands. There is no normal way to connect bluetooth to a carkit and many problems with a headset (Bluetrek G2). HTC admits there are problems with carkits and headsets. My TP evne starts to go on and off.A hard reset is my last resort and then I have to send it to HTC...... Good luck. Greetz Ton
ton66 said:
Yes and actually I complained today to the callcenter of HTC in the NEtherlands. There is no normal way to connect bluetooth to a carkit and many problems with a headset (Bluetrek G2). HTC admits there are problems with carkits and headsets. My TP evne starts to go on and off.A hard reset is my last resort and then I have to send it to HTC...... Good luck. Greetz Ton
Click to expand...
Click to collapse
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
It is a big problem for my! Bluetooth connection disconnect after a few minutes (of my car system).
halloj said:
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
Click to expand...
Click to collapse
Original HTC rom or a branded one. The branded T-mobile rom in the Netherlands is good. No connection problems what so ever. So I asked why HTC doesn't copy the T-mobile rom (lol)........
ton66 said:
Original HTC rom or a branded one. The branded T-mobile rom in the Netherlands is good. No connection problems what so ever. So I asked why HTC doesn't copy the T-mobile rom (lol)........
Click to expand...
Click to collapse
HTC unbranded one...which is even more unbelievable.
rinsel said:
It is a big problem for my! Bluetooth connection disconnect after a few minutes (of my car system).
Click to expand...
Click to collapse
Which makes me believe that your car system doesn't have the correct standard.
i need sone help regarding bluetooth
i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
and how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
can you help me?? please.. i've been searching some help for this matter but i have not got any answer yet....
thank you
excelex said:
i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
and how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
can you help me?? please.. i've been searching some help for this matter but i have not got any answer yet....
thank you
Click to expand...
Click to collapse
What hotfix?
halloj said:
What hotfix?
Click to expand...
Click to collapse
hmm i think they (the HTC) name it "Hot fix to enhance WAP security for HTC Touch Pro" ... it's on their website (http://www.htc.com/www/supportdownloadlist.aspx?p_id=140&act=sd&cat=all), but i was not able to install it on my raphael..
but my first priority is to make my bluetooth headset works with my HTC Raphael... can some one help me??
Losing bluetooth connection also occures with the T-mobile Dutch rom. (using original carkit of my Opel/vauxhall Vectra) Bluetooth on mij Vario IV is completely switched off after beeing several minutes connected. No problems with other bluetooth connections.
yes i have been having this problem lately, never had it before though, but all of a sudden it happens now, i will have to power down my headset and power back on in order to re estabilsh a connection
halloj said:
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
Click to expand...
Click to collapse
A hard reset has solved a lot of all my connection problems. I could not believe that this would solve anything but now i am convinced. It really works. Even the GPS fix is now really good (sorry might be off topic).
Greetz Ton
I have a bluetooth carkit from Nokia and have a problem when recieving a call. A outbound call using the carkit is going good but when recieving a call it doesn't use the carkit but the phone.
Who has a solution?
ronald-is said:
I have a bluetooth carkit from Nokia and have a problem when recieving a call. A outbound call using the carkit is going good but when recieving a call it doesn't use the carkit but the phone.
Who has a solution?
Click to expand...
Click to collapse
Are you answering the call with the buttons on the phone, or on the carkit? AFAIK answering with the buttons on the phone will always route the call direct to the phone, and bypass any headset or car kit.
Cheers,
Steve.
StevePritchard said:
Are you answering the call with the buttons on the phone, or on the carkit? AFAIK answering with the buttons on the phone will always route the call direct to the phone, and bypass any headset or car kit.
Click to expand...
Click to collapse
I will try this tomorrow! thanks!
Related
aladin2000 said:
Hi,
do you tried also a buttom to call with voice command application or a phone call ?
I've a HTC S100 and the sound is well but it's very difficult to start a voice commande or to recall last call because seem that the function "hand free" sometime is lose.
Sorry for my poor English !
Regards
aladino
Click to expand...
Click to collapse
I have the same problem with my handsfree headsets an Tytn II (kaiser):
i have a motorola H700 and a Scalarider headset for helmets.
They are bot NON-ADP and thyey support handsfree.
Sometimes the button on them stop working and I can't do voice dialing with Voice command neither repeat last call.
They appear as connected and If I manually call a number they work.
To get the button works again I have to restart the phone.
Maybe a fault in the microsoft bluetooth stack?
Also: my Motorola H700 has a flip and when you open it the headset turn on and get connected.
You should be able to answer phone calls by opening the flip.
Sometimes it works, but most of the time it doesn't connect if I open it while the phone is ringing and in that case I have to restart bluetooth connection to make it work again.
Microsoft or HTC should check end improve bluetooth stack!
Any hack around?
Can't we put the broadcom instead of microsoft stack on kaiser?
I wrote to HTC Support about this problem and they answered :
"Customer email address:XXXXXXXXXX
Good Afternoon,
The multi function button is the one small button with the led light in, not the big play/pause button.
If you try the other button, it should work.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
XXXXX
HTC Europe
[email protected]
http://www.htc.com "
That's incredible don't you ?
They beleive I'm idiot ?
Regards
aladino
Astonished!
Amazing answer!
Are they idiot?
I'll write them too,
I hope someone cleverer will read the my mail
and suggest the bug to the technical stuff.
I have a motorola H350 and have been experiencing the same problems. It's driving me mad. The problem makes the use of the hands free totally useless as it seems to stop working at the drop of a hat.
What I've found so far.
To get it working you need to turn on the ear piece.
Then turn on the bluetooth on the phone.
If you do this any other way it doesn't work. Once it's working you may or may not be able to hang up with the button. If that's the case it won't answer with the button either.
Once it's working it seems to work ok till either the headset or the phone's bluetooth is turned off.
Voice dial will not fire up until the main procedure if followed and sometimes it takes several tries.
I was wondering if this was something to do with the motorola but seemingly it's to do with the stack so getting another device isn't going to help I guess.
The bluetooth worked perfectly on the Hermes but immediately I got the Kaiser one thing alerted me to the fact that something was different.
With the Hermes, as soon as I turned on the bluetooth and the earpiece the phone would alert me to the fact that the motorola wanted to connect.
With the Kaiser nothing, even when I searched for a device. I had to find out how to put the earpiece into search mode before it would find it.
Very flakey and very disappointing. I hope someone finds a fix for this.
Anyone else experiencing these problems?
I've got an H700 and Jawbone. I do notice more crackle type sounds and lower volume on both using Kaiser compared to my 8525. The H700 connects within 1-2 seconds when opening it's flip and I have noticed that on occasion, if I walk away from the phone (eg. phone on desk) the headset may not reconnect when I return. The Jawbone has been fairly good at connecting and staying functional at all times but the volume is lower as noted by many people.
I would say that the stack overall is better than the 8525's for all the devices I've tried (3 headsets, 2 Laptops, 1 Garmin Streetpilot with BT Phone interface)
I am also losing the Voice speed dial & redial button from time to time. It also worked that way with my hermes, so I kinda get used to it...
I am now wondering if it is related to my BT earpiece (nokia bh-200 or something like this) of if it is the BT stack which has never been really working on all the device I could test (hermes, trinity, kaiser).
I allmost never had issue recieving call (I don't recieve much call while using the BT earpiece) but it is sometime impossible to initiate a call through the BT earpiece.
The simplest way for me to lose the voice recognition is to:
-Start BT on the phone
-Start BT earpiece
Phone recognize the earpiece, everything is fine
-Restart the phone
Phone & BT reconnect, but voice recognition & redial are gone
I would really appreciate of some of you could test my little procedure and report if it works of not. If it is working for some other BT earpiece I may change mine and get rid of this eternal annoying issue.
Thanks
Jabra BT500
I have the Jabra BT500 and same problem with the TyTn II.
The earpiece can't initiate a voice call...
Looks like HTC (or Windows), starts to deliver ROMs like Mr. Bill Gates does with his M$ crap...
If someone find a solution for this Bluetooth problem, please post it!!!!
Thanks a lot,
Kaiser and Moto H700 just do not work together
I also have a problem with the Kaiser and a Moto H700. The M700 button stops working randomly, the BT connection sometimes disconnect during the call at will.
I can still use H700 successfully with my old Nokia 6680, so the problem clearly is in the Kaisers BT stack.
I’ve made the BT update that HTC posted just recently for TyTN II, but it had no effect.
Fortunately, I have my old Moto H500. This one is working OK with the Kaiser, but. Like it was pointed here before me, the only way to get it working you need to turn on the ear piece. Then turn on the Bluetooth on the phone.
In case if the Bluetooth connection was disrupted for some reason, the only way to make it work is again swath Kaiser BT off then turn on the ear piece and switch on the TyTNs BT.
The Kaiser’s BT stack is not good also connecting with a PC, the connection is just not stable.
Just wanted to chime in and say I've had the exact same problems with my Tilt and Motorola H700 as various people have described here. I posted about it on the AT&T forum too, and no one there has any working solution either, AFAIK. I too tried the "fix" from HTC, and to no avail.
This is a pretty big disappointment for me; I love my Tilt, but Bluetooth is not new technology, and it's really inconvenient that it works so poorly on this phone.
Motorola headsets seem to have a problem with this device. I had trouble getting my H500 to connect and the voice button to work. Once I reset the phone when the headset was on and it wouldn't connect. I tried deleting and re-pairing. It took another reset to get it back. Fortunately I don't use that headset anymore.
jameselee said:
Just wanted to chime in and say I've had the exact same problems with my Tilt and Motorola H700 as various people have described here. I posted about it on the AT&T forum too, and no one there has any working solution either, AFAIK. I too tried the "fix" from HTC, and to no avail.
This is a pretty big disappointment for me; I love my Tilt, but Bluetooth is not new technology, and it's really inconvenient that it works so poorly on this phone.
Click to expand...
Click to collapse
The same problem.
But this time with the Sony Ericsson BT HBH - DS980.
I also put the "fix" from HTC, I gave them back and they change them with another brand new Sony Ericsson BT HBH - DS980, but the problem exists.
costas2by4AIO said:
The same problem.
But this time with the Sony Ericsson BT HBH - DS980.
I also put the "fix" from HTC, I gave them back and they change them with another brand new Sony Ericsson BT HBH - DS980, but the problem exists.
Click to expand...
Click to collapse
I just bought the same headset... cant get it work with the TyTN II - Kaiser but pairs without any problem with my TyTN I - Hermes... clearly it is the BT Stack
Way beyond my abilities, but cant the BT stack on Hermes be cooked into a rom for the Kaiser ?
I have a Motorola HT820 and a Motorola S9 both devices are working flawless with the kaiser.
Now i own a motorola S705 too , with this device my kaiser suddenly turn the bluetooth off (
regards
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Well with mine i have some hickus but it just happpends once a while.
Most irritating about Diamond and BT in my opinion is that wa have no equalizing for it. and the sound setup from the begining is horrible.
Asked here if anyone has a solution before but none replied.
But as far 2 your problem no. And i use a Pioneer system in my car.
Mauser.NET said:
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Click to expand...
Click to collapse
HI
Same was happend with me (Opel), when my battery is low.
orsiga said:
HI
Same was happend with me (Opel), when my battery is low.
Click to expand...
Click to collapse
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Mauser.NET said:
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Click to expand...
Click to collapse
I've a JVC head and my bluetooth has no problem.
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
davemazo said:
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
Click to expand...
Click to collapse
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Mauser.NET said:
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Click to expand...
Click to collapse
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
davemazo said:
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
Click to expand...
Click to collapse
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Mauser.NET said:
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Click to expand...
Click to collapse
Thanks again Mauser. I tried various settings but without any success, I think the phone is just not compatible with the Honda. Having said that I don`t have much luck with bluetooth at all on the phone. More often than not It just won`t detect other bluetooth devices and when it does it won`t send or receive files so it`s time for it to go and I can go back to a trusty Nokia
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Rapier said:
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Click to expand...
Click to collapse
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Yes, I have an Audi UHV 6634. Thank you for the info, I'll try that and post the results here. Though, my car-kit is not the advanced one and I don't have to sync anything with it (contacts or something else). It's most working as a plain hands-free device, no extra functions...speaking of which, I've noticed that on the phone is detected as "hands-free"...why not "car-kit" as I know a car-kit has other functionality as well? This is the "standard" BT device for any audio enhancements (even if it is a car-kit not a BT headset), or I have to activate something to be recognized as car-kit?
Mauser.NET said:
Jetware? I have also limited the phonebook sync to max 5 entries to debug
Click to expand...
Click to collapse
my Honda system doesn`t read the sim I can only dial out via handsfree using contacts i`ve entered into the Honda system otherwise I either have to read the number to the system and it will ring out (most of the time anyway) or make the call on the phone (illegally obviously) cancel the call and then say "redial" and the system makes the call. So uless I`m misunderstanding this setting I don`t think it will help me.
I`ve searched the Jetware website and I couldn`t find a fix for my Honda
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Rapier said:
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Click to expand...
Click to collapse
No thanx! I'm glad I could help
Mauser.NET said:
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Click to expand...
Click to collapse
Hello,
I have a Mercedes car kit and facing the same issue as you: everything works perfectly for a few days when hard-resetting my device, even with my 500+ contacts (they are loaded in less than a minute), but after a few days/weeks I can't get to have my call history or contacts displayed in less than half an hour!
Yesterday I thought I'd just hard reset my device because I had this problem again, but unfortunately it didn't work!
Guess what I have done differently this time: yes, I backed up and restored my call history, which I hadn't done the previous times! So I guess it is indeed related to the call history, but I can't test for now!
I have installed JetWare and limited the call history to 5 numbers, I'll try this tonight and I'll keep you informed...
Hello,
So I have tested this yesterday (installed Jetware and limited the call history to 5 numbers), and now it works FLAWLESSLY! I can browse through my 500 contacts instantaneously when I pair my phone with my Mercedes car kit.
So, in my case it was also clearly the CALL HISTORY that was causing problems... A BIG BIG thanks to Mauser for pointing out this!
I'm also having problem connecting my Diamond to my Volvo S80. All the other functions work except that I could not hear the other party through my car stereo and I also could not diconnect the call with my car end key.
I'll try the Jetware and I'll report back later. Thanks for the pointer.
turt said:
A BIG BIG thanks to Mauser for pointing out this!
Click to expand...
Click to collapse
No thanx! ... glad I could help
I just recently bought a new stereo bluetooth headset (dell BH200) which sounds great when I play music through it, but it comes with a gigantic flaw. I can't make or recieve calls. The moment any of that happens, the headset disconnects itself. I'm wondering what the problem is since the headset does support 2.0 with EDR and so does the fuze. One thing I did noticed though was that when I paired the headset, it did not ask for a passkey at all and just went straight to "save".
I'm wondering if there is anything that I can do to make the headset work with phone if anyone has any idea. I was lurking around and someone mentioned something about CoD (class of device) but I dont think that's the issue.
Thankyou for your time reading this post.
mputtr said:
I just recently bought a new stereo bluetooth headset (dell BH200) which sounds great when I play music through it, but it comes with a gigantic flaw. I can't make or recieve calls. The moment any of that happens, the headset disconnects itself. I'm wondering what the problem is since the headset does support 2.0 with EDR and so does the fuze. One thing I did noticed though was that when I paired the headset, it did not ask for a passkey at all and just went straight to "save".
I'm wondering if there is anything that I can do to make the headset work with phone if anyone has any idea. I was lurking around and someone mentioned something about CoD (class of device) but I dont think that's the issue.
Thankyou for your time reading this post.
Click to expand...
Click to collapse
mmm me thinks that it may not have paired correctly. I don't actually know much about the model you have. I have a Iclip R32 which I have had paired with most of my phones. It always asks for the passkey. I have always, once paired, made a call to my phone while the headset is connected. Not sure if it is related to my device or not but if I do not do this it will do weird things when I listen to music and receive calls. Sorry if this has not been of much help to you.
Bottom line: I would delete the pairing and do it again.
if you're not sure which bt headset it is, it's up on the dell website. Let me snag a link for you real quick. The problem is it only does half the function i want it to which is aggravating.
Here you go:
http://accessories.us.dell.com/sna/...etail.aspx?c=us&l=en&s=dhs&cs=19&sku=313-6220
that's the headset I got. The thing that strikes me as odd is that I couldn't enter a passkey nor is there an option for me to force to provide a passkey like vista. I heard rumors about the bluetooth stack automatically assuming passkeys for "unsafe" devices like headsets and all that. If anything should I consider getting a different bt stack? People were recomending Widdcomm's...
mputtr said:
if you're not sure which bt headset it is, it's up on the dell website. Let me snag a link for you real quick. The problem is it only does half the function i want it to which is aggravating.
Here you go:
http://accessories.us.dell.com/sna/...etail.aspx?c=us&l=en&s=dhs&cs=19&sku=313-6220
that's the headset I got. The thing that strikes me as odd is that I couldn't enter a passkey nor is there an option for me to force to provide a passkey like vista. I heard rumors about the bluetooth stack automatically assuming passkeys for "unsafe" devices like headsets and all that. If anything should I consider getting a different bt stack? People were recomending Widdcomm's...
Click to expand...
Click to collapse
Mm I checked them with the link you sent thanks for that.
Maybe my headset is getting old but it always asks for a passkey when I connect it. My Touch Pro did just like my Kaiser and Hermes. Sorry but maybe you will need to check with Dell. They do not mention any thing but I'm assuming that they have a microphone for phone calls....
edit: Doh I just read the 2nd page of reviews and it does have a mic. Sorry should of checked that before.
Well since your touch pro most probably runs wm6.1, i doubt it's because your headset is old. I wonder if there's a way to disable this automatic passkey guessing thing.
Anyone? any ideas on how to disable the automatic pin number guessing feature of wm6.1?
Kicks post up to page 1
So what do you guys think?
Would it be a good idea to use a different bt stack or am I stuck with no choice at all?
Need Help Badly!!
hi i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
i really need help....... pls, someone that have the same proble with their HTC Touch Pro bluetooth connection.....
is there a way to disable the automatic passkey mode that came with the MS bt stack or anything like changing my stack to a different' company's
hmm just want to ask.. have someone tried to pair Philip SHB7100 with HTC Raphael yet?? because i would like to buy this bluetooth, since my samsung WEP200 is not compatible...
thank you
excelex said:
hmm just want to ask.. have someone tried to pair Philip SHB7100 with HTC Raphael yet?? because i would like to buy this bluetooth, since my samsung WEP200 is not compatible...
thank you
Click to expand...
Click to collapse
Read here: http://hongkongphooey.wordpress.com/2007/10/23/unboxing-philips-shb7100-bluetooth-stereo-headset/
Hi all,
Need help with my HTC Diamond. As my Pioneer car navigation, with which the diamond bluetooth functioned well, was stolen, I was advised to mount a JVC navigation system NX7000 with a detachable front in order to prevent theft. However, the HTC bluetooth dysfunctions. It connects and pairs without problems, but when the diamond goes into sleep or is switched off, it is impossible to establish a phonecall using the JVC car-unit, although it indicates that blueconnection is still valid. When I switch on the phone, even minutes later, it will eventually do the call. If I force the HTC to remain powered-on it will function normally. I am sure that this has something to do with a suspend-mode of the diamond bluetooth part and that this can be solved by the right registry tweak. I tried several tweaks that I found on the forum already but without succes. I upgraded the HTC to the latest firmware 2.03 but no improvement.
I called with HTC and they said that they know the correct registrysettings but they won't supply them because of "licence restrictions"...........
Anybody the same problem? Somebody who has the solution?
Thanks
I have exactly the same problem! Incoming calls work fine, but like you, I cannot initiate outgoing calls from the JVC unit unless the diamond is turned on fully. I there's not a fix for this, I may have to go out and buy an iphone again after selling mine to get a diamond!
there is a fix but HTC won't tell. they suggested to open a thread on this forum in order to get suggestions on the matter. and so I did. When I subsequently asked them if they would post this solution on this forum they said they would not :-(
Bluetooth problems across the board with JVC NX7000
drpellypo said:
I have exactly the same problem! Incoming calls work fine, but like you, I cannot initiate outgoing calls from the JVC unit unless the diamond is turned on fully. I there's not a fix for this, I may have to go out and buy an iphone again after selling mine to get a diamond!
Click to expand...
Click to collapse
You may not want to fall back on an iPhone with the JVC NX7000. Not to go too far off-topic here, but pairing an single iPhone works great (once I figured out the overly complicated menus). BUT...it won't let me pair a second phone (of any kind). Once the first phone is paired, all pairing menu options are greyed out ("Search" and "Open"), thereby preventing any further phones from being paired. I first need to unpair the first phone before I can pair the second one. JVC Support is comically unhelpful.
Has anyone had luck paring more than 1 phone (of any brand) with the JVC NX7000?
You are the lucky one! You can succesfully pair one phone but it works
I don't care if I can only pair one phone. I only have one phone! lol.
Hey guys!
kind of the same problem here but with the Volvo built-in bluetooth solution. Actually when the device sleeps and I initiate a call it will take some time, then the device will turn on and it will begin to dial but drops immediately. When the device is fully turned on there is no problem at all. Incoming calls work just fine. Even though it first rings on the phone and after a second or two it will ring in the car and the device will stop ringing. Which confirms that bluetooth sleeps somehow and only connects fully when the device is fully awake.
It really looks like bluetooth goes to sleep, so we need a solution which keeps bluetooth awake even if the device itself is in sleep mode.
Patrick
Exactly the problem I described. It's a sleep or suspend mode of the bluetooth that causes the dysfunction. I can pair nokias wih JVC without any functional problem, they work like a charm. It is really a HTC related problem, I tried a lot of registry tweaks suggested for similar problems in other HTC devices, but no luck so far.
Reply to Guitartng:
storing multiple bluetoothdevices in the JVC for subsequent use can be done by selecting "new device" and then go to "bluetooth setup".
Exact same issue with a Kenwood DNX 8120 double din unit.
If anyone finds out the solution, please post it here. I'll keep searching.
Good News Lads!
Well after blowing my head of trying different roms and radios got a solution.
The solution comes from JVC stereo and not from Htc diamond Phone!
You have to set special phones To Samsung E520 and then pair device with the htc diamond. It works like a charm, know I can make calls through my JVC stereo and NO MORE deep sleep of htc diamond.
Try with samsung, it work for me, if not try with other phones in special phones before pairing!
Cheers!
I just wanted to let you know that I also was able to fix my bluetooth issue by flashing stock firmware 2.03.405.3 WWE with Radio 1.09.25.23. I was previously using Dutty's V4 which is based on 2.03 afaik, but it look like Dutty tweaked something on the bluetooth stby behaviour.
Anyway, it works like a charm now and the whole calling and answering process is also much faster!
Hi there.
I have a HTC SHIFT (x9500) with
ROM version = 1.0.7 ROMeO_S WWE
RADIO Version = 1.27.35.28
And i have a problem that bluetooth dosn´t work
Its like no bluetooth are installed in the phone
In COMM MANAGER theres only = Phone on/off - Flight mode - Active sync, but i can only choose phone on/off or flight mode.
Can i install a bluetooth (anything) and make it work ? (Just for bluetooth headset, and thats all)
Or is there a ROM with it all you can recommend ?
I only want to change the phone section --- The computersection is running fine with W7
Really hope someone can help me (and maybee give a link to "how to install it")
Thanks
Unfortunately bluetooth, wireless and SD card are not working on the Windows Mobile side of the Shift, only on the Vista side. And there is no publicly known cure for that. Sorry to disappoint you.
axelTP2 said:
Unfortunately bluetooth, wireless and SD card are not working on the Windows Mobile side of the Shift, only on the Vista side. And there is no publicly known cure for that. Sorry to disappoint you.
Click to expand...
Click to collapse
Thats ok.... I was just hoping that a bluetooth headset could solve my problem, here --->>>
My problem is that when i use headset (incl mic), no one can here me when i talk into the headset
When i disconnect the headset, the build in mic is working fine
I have tried with 3 headsets and the pin connection are ok, and the headsets working fine with other phones.
The problem is that when i connect a headset or headphones, the build in mic is disconnected.
If i try the headset(s) in the computersection, the mic is working fine.
And if i set the mic to (Listen to this), in the computersections soundoptions, i can here myself in the headset.
Maybe its the ROM to the phone theres no good ?
Cujox7500 said:
My problem is that when i use headset (incl mic), no one can here me when i talk into the headset.
When i disconnect the headset, the build in mic is working fine.
Maybe its the ROM to the phone theres no good ?
Click to expand...
Click to collapse
This is a known problem of the Shift, there is nothing wrong with your headset or your ROM version. Until somebody will find a cure for that (if ever....), you'll have to live with it.
axelTP2 said:
This is a known problem of the Shift, there is nothing wrong with your headset or your ROM version. Until somebody will find a cure for that (if ever....), you'll have to live with it.
Click to expand...
Click to collapse
Ok.... bad luck
But maybe you can help me how to setup MMS ?
I can sent and receive SMS, but i dont know how to set the phone up to sent and receive MMS´s
Cujox7500 said:
But maybe you can help me how to setup MMS ?
Click to expand...
Click to collapse
Hi Cujox7500!
Sorry, I only used my Shift as a phone for a couple of times out of curiosity.
To send MMS you should look for the settings your GSM operator is recommending, check on its website. Or maybe it could send the settings automatically via SMS.
bluetooth for htc x9500
Hello Guys
Nobody has yet solved for bloutooth in SnapVUE X9500?