Related
having trouble getting my Pioneer AVIC D3 to connect with the bluetooth on my Tilt; the bluetooth audio works just fine, but i cannot make or recieve calls on the Navi system and its pissing me off. i already made sure the device is visible and bluetooth sharing is turned on (idk if i need it on but trying this anyways)
anyone else have a similar problem or a suggestion?
ugh, i want an AVIC so bad. but my truck is only 1.5 din. wold require a custom install
My silly thoughts:
1. Your Tilt doesn't need to be discoverable, you AVIC does.
2. If the AVIC doesn't show under settings-connections-bluetooth, then you haven't created a proper partnership.
3. If it does show there, then you should tap & hold that entry and see if you get "Set Headset" or "Set Handsfree". If you don't then the device isn't reporting a BT profile for phone use to the Tilt.
If you go through all of that and it doesn't work, I'd check with Pioneer for software/firmware upgrades for the AVIC. It may be an issue that they've fixed with updated code.
bump, tried the above with no luck. my sony S710a works fine and this is REALLY pissing me off; i spent almost $500 on the phone and another 1,000 on the damn navi system, if this doesnt work out soon im selling the Tilt and going back to the Sony
It is more of a problem with the pioneer unit rather then the phone. I have the tilt (flashed to htc) and have a problem of auto pairing. Everytime I get in the car I have to turn bluetooth off/on to get the deck (9800bt) to see the phone. This is something pioneer knows about a realesd a patch for the avic z2 (is that right) to fix the problem.
check this place out for more info (sorry don't have a direct link)
http://www.avic411.com/
blackcracker said:
It is more of a problem with the pioneer unit rather then the phone. I have the tilt (flashed to htc) and have a problem of auto pairing. Everytime I get in the car I have to turn bluetooth off/on to get the deck (9800bt) to see the phone. This is something pioneer knows about a realesd a patch for the avic z2 (is that right) to fix the problem.
check this place out for more info (sorry don't have a direct link)
http://www.avic411.com/
Click to expand...
Click to collapse
thanks im a member at avic411 as well as here and have had no success thus far; looks like SIM swapping with my Sony S710a is the best i can do. too bad because skipping songs or going thru my playlists via bluetooth is freakin sweet.
yah, i have the avic-d3 and the att/tilt, im so almost about to take the phone back. Even my crappy iphone paired withno issue. Please post if you figure it out.
Sad to see there has been no progress. I just got my new Kaiser, and I can only use it for bluetooth music and not as hands free with Avic D3. What a piss offf!!!!!!!!!!
I believe its a conflict with WM. I have the Pioneer 6800DVD and bt adapter and the same issue with my Treo 750 and Tilt.
I was able to get it to work on my treo using a bt program called jetware. I haven't tried it on my tilt yet. but it might work
I can confirm that the Jetware patch works great with my Tilt! You MUST uncheck bluetooth stereo (on your tilt) and only use the handsfree feature.
I just recently bought a new stereo bluetooth headset (dell BH200) which sounds great when I play music through it, but it comes with a gigantic flaw. I can't make or recieve calls. The moment any of that happens, the headset disconnects itself. I'm wondering what the problem is since the headset does support 2.0 with EDR and so does the fuze. One thing I did noticed though was that when I paired the headset, it did not ask for a passkey at all and just went straight to "save".
I'm wondering if there is anything that I can do to make the headset work with phone if anyone has any idea. I was lurking around and someone mentioned something about CoD (class of device) but I dont think that's the issue.
Thankyou for your time reading this post.
mputtr said:
I just recently bought a new stereo bluetooth headset (dell BH200) which sounds great when I play music through it, but it comes with a gigantic flaw. I can't make or recieve calls. The moment any of that happens, the headset disconnects itself. I'm wondering what the problem is since the headset does support 2.0 with EDR and so does the fuze. One thing I did noticed though was that when I paired the headset, it did not ask for a passkey at all and just went straight to "save".
I'm wondering if there is anything that I can do to make the headset work with phone if anyone has any idea. I was lurking around and someone mentioned something about CoD (class of device) but I dont think that's the issue.
Thankyou for your time reading this post.
Click to expand...
Click to collapse
mmm me thinks that it may not have paired correctly. I don't actually know much about the model you have. I have a Iclip R32 which I have had paired with most of my phones. It always asks for the passkey. I have always, once paired, made a call to my phone while the headset is connected. Not sure if it is related to my device or not but if I do not do this it will do weird things when I listen to music and receive calls. Sorry if this has not been of much help to you.
Bottom line: I would delete the pairing and do it again.
if you're not sure which bt headset it is, it's up on the dell website. Let me snag a link for you real quick. The problem is it only does half the function i want it to which is aggravating.
Here you go:
http://accessories.us.dell.com/sna/...etail.aspx?c=us&l=en&s=dhs&cs=19&sku=313-6220
that's the headset I got. The thing that strikes me as odd is that I couldn't enter a passkey nor is there an option for me to force to provide a passkey like vista. I heard rumors about the bluetooth stack automatically assuming passkeys for "unsafe" devices like headsets and all that. If anything should I consider getting a different bt stack? People were recomending Widdcomm's...
mputtr said:
if you're not sure which bt headset it is, it's up on the dell website. Let me snag a link for you real quick. The problem is it only does half the function i want it to which is aggravating.
Here you go:
http://accessories.us.dell.com/sna/...etail.aspx?c=us&l=en&s=dhs&cs=19&sku=313-6220
that's the headset I got. The thing that strikes me as odd is that I couldn't enter a passkey nor is there an option for me to force to provide a passkey like vista. I heard rumors about the bluetooth stack automatically assuming passkeys for "unsafe" devices like headsets and all that. If anything should I consider getting a different bt stack? People were recomending Widdcomm's...
Click to expand...
Click to collapse
Mm I checked them with the link you sent thanks for that.
Maybe my headset is getting old but it always asks for a passkey when I connect it. My Touch Pro did just like my Kaiser and Hermes. Sorry but maybe you will need to check with Dell. They do not mention any thing but I'm assuming that they have a microphone for phone calls....
edit: Doh I just read the 2nd page of reviews and it does have a mic. Sorry should of checked that before.
Well since your touch pro most probably runs wm6.1, i doubt it's because your headset is old. I wonder if there's a way to disable this automatic passkey guessing thing.
Anyone? any ideas on how to disable the automatic pin number guessing feature of wm6.1?
Kicks post up to page 1
So what do you guys think?
Would it be a good idea to use a different bt stack or am I stuck with no choice at all?
Need Help Badly!!
hi i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
i really need help....... pls, someone that have the same proble with their HTC Touch Pro bluetooth connection.....
is there a way to disable the automatic passkey mode that came with the MS bt stack or anything like changing my stack to a different' company's
hmm just want to ask.. have someone tried to pair Philip SHB7100 with HTC Raphael yet?? because i would like to buy this bluetooth, since my samsung WEP200 is not compatible...
thank you
excelex said:
hmm just want to ask.. have someone tried to pair Philip SHB7100 with HTC Raphael yet?? because i would like to buy this bluetooth, since my samsung WEP200 is not compatible...
thank you
Click to expand...
Click to collapse
Read here: http://hongkongphooey.wordpress.com/2007/10/23/unboxing-philips-shb7100-bluetooth-stereo-headset/
Anyone have a problem with their Raphael (assuming it's a HTC Touch Pro) dropping bluetooth (especially headsets)?
I've got two bluetooth headsets and this phone, halfway through a call, at no predictable time will ditch the headset whilst leaving the call active...nightmare.
HTC don't wanna know about it, does anyone else have this trouble and better still, has anyone got a fix for it?
Cheers
T
Yes and actually I complained today to the callcenter of HTC in the NEtherlands. There is no normal way to connect bluetooth to a carkit and many problems with a headset (Bluetrek G2). HTC admits there are problems with carkits and headsets. My TP evne starts to go on and off.A hard reset is my last resort and then I have to send it to HTC...... Good luck. Greetz Ton
ton66 said:
Yes and actually I complained today to the callcenter of HTC in the NEtherlands. There is no normal way to connect bluetooth to a carkit and many problems with a headset (Bluetrek G2). HTC admits there are problems with carkits and headsets. My TP evne starts to go on and off.A hard reset is my last resort and then I have to send it to HTC...... Good luck. Greetz Ton
Click to expand...
Click to collapse
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
It is a big problem for my! Bluetooth connection disconnect after a few minutes (of my car system).
halloj said:
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
Click to expand...
Click to collapse
Original HTC rom or a branded one. The branded T-mobile rom in the Netherlands is good. No connection problems what so ever. So I asked why HTC doesn't copy the T-mobile rom (lol)........
ton66 said:
Original HTC rom or a branded one. The branded T-mobile rom in the Netherlands is good. No connection problems what so ever. So I asked why HTC doesn't copy the T-mobile rom (lol)........
Click to expand...
Click to collapse
HTC unbranded one...which is even more unbelievable.
rinsel said:
It is a big problem for my! Bluetooth connection disconnect after a few minutes (of my car system).
Click to expand...
Click to collapse
Which makes me believe that your car system doesn't have the correct standard.
i need sone help regarding bluetooth
i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
and how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
can you help me?? please.. i've been searching some help for this matter but i have not got any answer yet....
thank you
excelex said:
i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
and how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
can you help me?? please.. i've been searching some help for this matter but i have not got any answer yet....
thank you
Click to expand...
Click to collapse
What hotfix?
halloj said:
What hotfix?
Click to expand...
Click to collapse
hmm i think they (the HTC) name it "Hot fix to enhance WAP security for HTC Touch Pro" ... it's on their website (http://www.htc.com/www/supportdownloadlist.aspx?p_id=140&act=sd&cat=all), but i was not able to install it on my raphael..
but my first priority is to make my bluetooth headset works with my HTC Raphael... can some one help me??
Losing bluetooth connection also occures with the T-mobile Dutch rom. (using original carkit of my Opel/vauxhall Vectra) Bluetooth on mij Vario IV is completely switched off after beeing several minutes connected. No problems with other bluetooth connections.
yes i have been having this problem lately, never had it before though, but all of a sudden it happens now, i will have to power down my headset and power back on in order to re estabilsh a connection
halloj said:
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
Click to expand...
Click to collapse
A hard reset has solved a lot of all my connection problems. I could not believe that this would solve anything but now i am convinced. It really works. Even the GPS fix is now really good (sorry might be off topic).
Greetz Ton
I have a bluetooth carkit from Nokia and have a problem when recieving a call. A outbound call using the carkit is going good but when recieving a call it doesn't use the carkit but the phone.
Who has a solution?
ronald-is said:
I have a bluetooth carkit from Nokia and have a problem when recieving a call. A outbound call using the carkit is going good but when recieving a call it doesn't use the carkit but the phone.
Who has a solution?
Click to expand...
Click to collapse
Are you answering the call with the buttons on the phone, or on the carkit? AFAIK answering with the buttons on the phone will always route the call direct to the phone, and bypass any headset or car kit.
Cheers,
Steve.
StevePritchard said:
Are you answering the call with the buttons on the phone, or on the carkit? AFAIK answering with the buttons on the phone will always route the call direct to the phone, and bypass any headset or car kit.
Click to expand...
Click to collapse
I will try this tomorrow! thanks!
Hi all,
Need help with my HTC Diamond. As my Pioneer car navigation, with which the diamond bluetooth functioned well, was stolen, I was advised to mount a JVC navigation system NX7000 with a detachable front in order to prevent theft. However, the HTC bluetooth dysfunctions. It connects and pairs without problems, but when the diamond goes into sleep or is switched off, it is impossible to establish a phonecall using the JVC car-unit, although it indicates that blueconnection is still valid. When I switch on the phone, even minutes later, it will eventually do the call. If I force the HTC to remain powered-on it will function normally. I am sure that this has something to do with a suspend-mode of the diamond bluetooth part and that this can be solved by the right registry tweak. I tried several tweaks that I found on the forum already but without succes. I upgraded the HTC to the latest firmware 2.03 but no improvement.
I called with HTC and they said that they know the correct registrysettings but they won't supply them because of "licence restrictions"...........
Anybody the same problem? Somebody who has the solution?
Thanks
I have exactly the same problem! Incoming calls work fine, but like you, I cannot initiate outgoing calls from the JVC unit unless the diamond is turned on fully. I there's not a fix for this, I may have to go out and buy an iphone again after selling mine to get a diamond!
there is a fix but HTC won't tell. they suggested to open a thread on this forum in order to get suggestions on the matter. and so I did. When I subsequently asked them if they would post this solution on this forum they said they would not :-(
Bluetooth problems across the board with JVC NX7000
drpellypo said:
I have exactly the same problem! Incoming calls work fine, but like you, I cannot initiate outgoing calls from the JVC unit unless the diamond is turned on fully. I there's not a fix for this, I may have to go out and buy an iphone again after selling mine to get a diamond!
Click to expand...
Click to collapse
You may not want to fall back on an iPhone with the JVC NX7000. Not to go too far off-topic here, but pairing an single iPhone works great (once I figured out the overly complicated menus). BUT...it won't let me pair a second phone (of any kind). Once the first phone is paired, all pairing menu options are greyed out ("Search" and "Open"), thereby preventing any further phones from being paired. I first need to unpair the first phone before I can pair the second one. JVC Support is comically unhelpful.
Has anyone had luck paring more than 1 phone (of any brand) with the JVC NX7000?
You are the lucky one! You can succesfully pair one phone but it works
I don't care if I can only pair one phone. I only have one phone! lol.
Hey guys!
kind of the same problem here but with the Volvo built-in bluetooth solution. Actually when the device sleeps and I initiate a call it will take some time, then the device will turn on and it will begin to dial but drops immediately. When the device is fully turned on there is no problem at all. Incoming calls work just fine. Even though it first rings on the phone and after a second or two it will ring in the car and the device will stop ringing. Which confirms that bluetooth sleeps somehow and only connects fully when the device is fully awake.
It really looks like bluetooth goes to sleep, so we need a solution which keeps bluetooth awake even if the device itself is in sleep mode.
Patrick
Exactly the problem I described. It's a sleep or suspend mode of the bluetooth that causes the dysfunction. I can pair nokias wih JVC without any functional problem, they work like a charm. It is really a HTC related problem, I tried a lot of registry tweaks suggested for similar problems in other HTC devices, but no luck so far.
Reply to Guitartng:
storing multiple bluetoothdevices in the JVC for subsequent use can be done by selecting "new device" and then go to "bluetooth setup".
Exact same issue with a Kenwood DNX 8120 double din unit.
If anyone finds out the solution, please post it here. I'll keep searching.
Good News Lads!
Well after blowing my head of trying different roms and radios got a solution.
The solution comes from JVC stereo and not from Htc diamond Phone!
You have to set special phones To Samsung E520 and then pair device with the htc diamond. It works like a charm, know I can make calls through my JVC stereo and NO MORE deep sleep of htc diamond.
Try with samsung, it work for me, if not try with other phones in special phones before pairing!
Cheers!
I just wanted to let you know that I also was able to fix my bluetooth issue by flashing stock firmware 2.03.405.3 WWE with Radio 1.09.25.23. I was previously using Dutty's V4 which is based on 2.03 afaik, but it look like Dutty tweaked something on the bluetooth stby behaviour.
Anyway, it works like a charm now and the whole calling and answering process is also much faster!
For some reason when my phone connects to a headset that supports both audio and phone the audio will not auto connect. I have to open the bluetooth options and hold down on the device i want to connect to then check the audio box.
sounds similar to the problem I'm having... I connect my phone via bluetooth to my car (Ford Sync) and I need to turn bluetooth off then on at least once (if not twice) for the car to recognize the phone.
I am getting so fustrated with this phone... Its been replaced twice (like replacing hardware is going to fix a software bug).
i really want to stay with an Android phone... maybe the Samsung Moment? it appears as if 2.x is now available (unofficially?) since Samsung released the Kernel source like they were supposed to.
TL
It worked before fresh 1.1 so maybe it was just a change in something.
I'm using the stock software and I have the problem so it is not freshrom
man we need an update HTC!!!!!!!
q1 almost over so we're that much closer to getting our official 2.1 update.
I've also got a bluetooth problem - would really appreciate any help you can offer.
I have a Tomtom and headphoned in my Bike Crash Helmet. I want to connect so I can hear music and phone calls through the phone in my helmet and also hear the TomTom.
The Tomtom connects to the Helmet, the phone connects to the Tomtom and I can get calls through the speakers via the Tomtom but music won't play (apart from an annoying second or two after dropping a call).
If I can get the phone to advertise headset features I could connect the Tomtom to the phone and the phone to the speakers (think that would work), otherwise I believe the Tomtom is not advertising media audio, only phone audio and don't expect I can change that.
Any thoughts...?
PS - Have tried the market headset app - unfortunately it doesn't fix the problem...
Time_Lord said:
sounds similar to the problem I'm having... I connect my phone via bluetooth to my car (Ford Sync) and I need to turn bluetooth off then on at least once (if not twice) for the car to recognize the phone.
I am getting so fustrated with this phone... Its been replaced twice (like replacing hardware is going to fix a software bug).
i really want to stay with an Android phone... maybe the Samsung Moment? it appears as if 2.x is now available (unofficially?) since Samsung released the Kernel source like they were supposed to.
TL
Click to expand...
Click to collapse
well now the source for the CDMA hero is out so shouldnt be long till a lot of the little bugs arre resolved.