I have this problem where i can't hear sound from my wired headset, it seems to be a problem with the sound port itself. I also cannot cannot hear anything from the internal speaker without pushing it down or trying to push it into the corner.
i now have a bluetooth headset which is how i got around it but it bugs me when i cannot hear the phone ringing, only vibrate!
I was wondering if anyone knew how to Open the Mda and fix the port into place so that i can plug in a wired headset so that i can listen to MP3's.
I have seen the pdf on the magician and was wondering if there was something like this for the BA?
very much appreciate your help.
Thanks
Ash
Related
OK!
I feel stupid.
I am running a Tilt and a Jawbone headset.
With the bluetooth on, the ring tones go through the Jawbone. How do I make them go through the phone's speaker instead.
I did read a thread about this issue someone else had, but it was with a stereo headset, which the JB isn't
Thanks!
I feel stupid too - I have the opposite problem. The Bluetooth hands free in the car doesn't ring on INcoming calls... just the Kaiser rings (and if its in my case I don't hear it)
I guess its a setup issue - any suggestions?
Graham
Hi all!
I have TomTom7 installed which is working fine (almost).
When I place my Diamond in the car holder (three way output w. USB-Charge/USB-Headphones/3,5mm Headphone) all sounds from my phone are muted (believed to be connected to a headphone I guess).
I could connect the phone to the car audio system via a 3,5 mm audio plug, but then I cannot listen to the radio at the same time as navigating with TomTom.
Is there any known way to solve this so the TomTom7 directions and warnings are always routed through the Diamond internal speaker?
groover71 said:
Hi all!
I have TomTom7 installed which is working fine (almost).
When I place my Diamond in the car holder (three way output w. USB-Charge/USB-Headphones/3,5mm Headphone) all sounds from my phone are muted (believed to be connected to a headphone I guess).
I could connect the phone to the car audio system via a 3,5 mm audio plug, but then I cannot listen to the radio at the same time as navigating with TomTom.
Is there any known way to solve this so the TomTom7 directions and warnings are always routed through the Diamond internal speaker?
Click to expand...
Click to collapse
i have this carholder too, it's from brodit right? It's true, the moment you plug in the diamond it thinks it's connected to a headset, so no sound from internal speaker. Ideal for listening to music when connected to your car stereo ofcourse, but when receiving a call you have to take out the diamond, because the sound goes through the car speakers (if the output is connected to your car stereo ofcourse) but you can't talk back because diamonds mic is also muted! I hope there is a way to solve this. Maybe a little program that allows you to direct sound and mic settings?
It's also a similar problem with the little USB to 3.5mm audio adapters, they make the diamond think there is a mic plugged in when there isn't and when someone calls you while you're listening to music, they cant hear you unless you unplug the headphones.
I've also noticed that when the diamond is in my car and connected to my bluetooth kit, the calls come via bluetooth but TomTom does not, this particularly annoys me, as when I'm listening to loud music I miss the speed camera alerts and also obviously cant hear the voice directions.
There seem to be some fairly serious shortcomings in this area. A simple set of options that let the user choose what he/she likes would be best.
Yepp Glenner, it is a Brodit car holder!
A program to solve this as you mention would be great!
Anyone got the skills to solve this?
Yesterday driving home from my work I noticed that the ring tone on an incoming call was heard even when the phone was placed in the holder...
So there must be a way to have the sound re-directed to the internal speaker???
Solved!
Try this little program http://www.freewarepocketpc.net/ppc-download-btmusic.html It sends audio from you diamond to either BT headphone or speaker. Just tried it and seems to work fine, but does need .netCF 2.
Best of luck!
Hi, this BT music doesn't seem to work with my car kit... My car kit supports HFP profile (Handsfree profile)...
What did you do exactly to make it work?
eadon said:
Try this little program http://www.freewarepocketpc.net/ppc-download-btmusic.html It sends audio from you diamond to either BT headphone or speaker. Just tried it and seems to work fine, but does need .netCF 2.
Best of luck!
Click to expand...
Click to collapse
if you rename btmusic.exe.config (not btmusic.exe!!) you can run it too with .NET CF 3.5
Trick i learned from the developer of BTMusic.
xavalon said:
if you rename btmusic.exe.config (not btmusic.exe!!) you can run it too with .NET CF 3.5
Trick i learned from the developer of BTMusic.
Click to expand...
Click to collapse
Rename to what?
I figured it out. Renaming btmusic.exe.config to btmusic.exe.configx does it.
Hi, i have spent some time searching now and since i couldn't find this anywhere i decided to post here, hope someone can help me.
Recently, i bought the official sony playstation 3 bluetooth headset (http://www.us.playstation.com/PS3/Accessories/SCPH-98095) and i have connected it to my xperia x1 through bluetooth (running with itje's touch-it xperience v13.2), the problem is, it only outputs sound for the voice calls, i can't listen to music on it or the normal phone sounds. I know it would be mono sound and not high quality, but i would like to listen to the sound anyway sometimes because its better then leaving it silent.
i have tried in the bluetooth configuration window, clicking in advanced, editing the wireless device profile, thre it was marked hands-free, i clicked refresh and headset appeared, i marked it, then the headset disconnects. when i reconnect it, it auto demarks headset, or it doesnt connect.
I have looked around to see if it was the bluetooth headset problem, but i have not seen anyone else complaining about this or even mentioning it can't play the phone sounds (just some complains about the ps3 sounds not outputing but thats the ps3 fault), and i have also searched to see if it is x1s fault but haven't managed to find an answer as well, so if anyone can plz help i would really appreciate it. Thanks.
thats pretty much because its no BUG.
what u want is a a2dp headset. something tells me that the ps3 headset doesn has this feature. normal headset just route voice calls while a2dp headset route everything.
actually, i didnt use the word bug because i though that might be the case
it has the headset and handsfree profile, not a2dp, but what i wasnt sure if it really needed to have de a2dp profile to output normal sounds, from what i've read it seems it is needed to output stereo high quality sounds, but just sounds with low quality would work for me, thats why im asking, i though the headset profile would be enough for that.
so if i get your message right, unless it has specifically the a2dp profile, there is no other way of making the sound output on the headset, low or high quality?
now i know there might be a way to make it work.
i was listening to some music today using the music player that comes with touchflo 3d, then i pressed the talk button of my bluetooth headset to issue a voice command (with the microsoft voice command program), then the music started playing in my headset while it was waiting for the voice command, once it got the command the music went back to the phone.
Does anyone know any way to make my headset keep playing the sounds, or could at least explain what happens when i press the talk button so i have an idea of where to look to see if find a way?
no one can help me with this? not any tip or a way to select a different output for audio or anything like that?
Also an issue with Audio Gateway
I have tested this issue on two seperate headsets, and so far can get the Xperia to work ONLY as hands free. Seperate phones sperate headsets. The other phone pushed audio thru to the headset whereas the X1 only routes calls.
I also cant find much of this on XDA or anywhere else?
Help?
Regards
i used an ad2p software downloaded from here when i had this issue with my lg ks20. But i havent the gut or im just lazy to try this app on the x1. Maybe u should give that ad2p software a try.
Hi everybody. I have just got my new HTC One and I am really loving it. But I seem to have run into a major problem which I couldn't solve despite trying everything. Whenever I receive or dial a phone call while using a wired headset or bluetooth headset, I can hear the sound in the headset for a couple of seconds but then the call is routed by default to the internal speakers and mic. All this while the phone shows that the output is going to the headset. If I change it to the internal speaker and back again to the headset (wired or bluetooth), everything works normally and I can talk and hear through the headset. This problem only occurs with phone calls and I am able to listen to the music through headsets normally without any sound quality issue. I have searched on various internet forums but all in vain. A few more people were having this problem but no solution was in sight. I thought may be an upgrade would solve this problem but alas even after upgrading to the latest 4.3 update, the problems remains. Hope somebody here can help me with this problem.
I've recently purchased a lovely headset from XiaoMi for my Huawei P20Pro.
It's Mi ANC & Type C In-Ear Earphones. Model: JZEJ01JY.
It has lovely audio and works fine with most of the features except...
When I made calls, the headphone will not hear any sound at all. no dial tone, not even when someone picked up the phone on the other end.
I noticed a quick fix for this error is to turn on the handsfree mode when you made the call; after you hear the sound from the handsfree mode, turn off the hands-free, then the sound will start coming in through the headset.
Another option is to wait until you hear the dial tone then only plugged in the headset.
It is not quite ideal considering the hassle of having to do so.
The error was so niched that I could not find generic help online at the moment.
Anyone shares the same pain or could provide some help here? Thanks!
Sounds like a compatibility issue. Use the stock earphones and check of the problem also persists.
Same problem with stock headset
Hi, same issue with the original headset that came with the P20 phone. Same clumsy solution. Have you solved it?...