All of you, thanks for the good work! The upgrade went well except for this problem. I have gone through a tough 8 hours and I still cannot get this thing to sync. At first there was no connection. Now after reinstalling the ROM and reinstalling the activesync, they see each other but, I get an error from activesync 4 stating "this version of microsoft activesync is not compatable with the connected device. please upgrade to a newer version of activesync and reconnect" I just downloaded this version of activsync 4.0.0 build 4343. Is that what everyone else is using? Please help if you have any ideas as I am getting very frustrated.
Firstly ensure you do not have any firewall software running as this causes havoc with ActiveSync 4 and WM5...
Secondly, are you running XP SP2? If you are using SP1 or earlier then ActiveSync 4 will not function correctly!
Yes I have all firewall software shut down and I am on SP2 for XP. The error is strange though. Any other ideas?
Had to downgrade
Just a quick addition. I downgraded back 1.4 and activesync 4.0 now works fine with no system changes. The problem had to be with the 5.0 installation on my XDAIIs. Everything else worked so it is quite strange.
Mine wouldnt sync, it would even pick up that it was plugged in it kept sayin unkown usb device has malfunctioned, worked fine after hard reboot.
Related
Please help. I flashed 2.16.9.x and now ActiveSync doesn't work anymore, it connects all the time. PDA doesn't show activesync syncronization icon.
I tried to flash another versions of ROM, but it didn't help.
The problem may lie with the PC as opposed to the PDA. Have you tried a remove / re-install of AS4.1 on the PC?
Bebbo said:
The problem may lie with the PC as opposed to the PDA. Have you tried a remove / re-install of AS4.1 on the PC?
Click to expand...
Click to collapse
Of course I have. Even I tried on another computer.
vishny said:
Of course I have.
Click to expand...
Click to collapse
Fair enough, I was just trying to help. Perhaps if you had stated that in your original text I would not have provided such an "Obvious" answer. I will leave it up to others now to take guesses as to what you "might or might not have done"......
vishny said:
Please help. I flashed 2.16.9.x and now ActiveSync doesn't work anymore, it connects all the time. PDA doesn't show activesync syncronization icon.
I tried to flash another versions of ROM, but it didn't help.
Click to expand...
Click to collapse
Try to make your computer or laptop restore on earlier date then since it started. I had once this problem i don't know but sometimes it with the system files in computer missing then the problem occurs.
Although my ActiveSync works almost fine after the same rom-upgrade, I encounter its strange behaviour sometimes (rear, not always!) - PDA slows down to a crawl right after you disconnect it from a desktop PC (either USB or Bluetooth). It becomes so terribly slow that it takes 20-30 sec to draw the Comm-manager window! then you better soft-reset, then it works just fine. Why am I... to prove that ActiveSync 4.1 is not quite stable with new ROM version 2.16. There is a bug somewhere, and it has to be reported to i-Mate firmware writers.
Have you followed Microsoft rules about configuring firewalls for ActiveSync 4.1? Does it create a network connection 169.254.2.1 on a desktop PC?
Thank you guys, but I guess my case is harder:
1. I have firewall switched off. I didn't change any setting in computer. I just flashed new ROM.
2. I flashed my original ROM, but it didn't help.
3. I tried to sync on several computers and had the same result.
By the way I cannot return to original ipl/spl, I don't know how to do that.
Today I visited repairing service's office and they've prooved me my device is not broken, it synchronizes succesfully via USB on their computer. :shock:
So, the problem is related to my computer(s). If I'll find something I report in this thread.
it probably has to do with one of the cabs you installed that are on your original extrom or someone elses. Most people who have had problems after the upgrade on an 8125 (Cingular) have installed cingular cabs from the old rom. I had to to figure out the MMS configuration and after I foundthe one that did my activesync no longer worked. after a reflash and only installing some of the default cabs that came with the new rom and manually configuring the mms and gprs I don't have any problems at all.
well maybe it is the version of activesync we are using when this does happen.
I'm running the ROM that came with the Cingular 8125, and it does the same thing ... 1 in 10 times after disconnecting the device from the PC, the 8125 slows to a crawl, and the only way to recover is a soft-reset. 9 out of 10, it works fine.
OS ROM: 1.8.11.1 WWE
Radio: 01.09.11
Protocol: 4.0.13.20
not overclocked
soon to be ROM upgraded (hopefully)
ethorn said:
well maybe it is the version of activesync we are using when this does happen.
Click to expand...
Click to collapse
I use 4.1 for a long time.
I didn't install anything on my pda. It happens even after hard reset. I even tried to flash original rom. In all cases ActiveSync displays "Connecting...", pda even doesn't display sync icon.
I tried to sync with standalone notebook and it was successfull. I'm really shocked why pda cannot sync with my desktop(s). It seems to me it could happen after some windows unattendant updates or something, I'm still investigating...
I have Qtek 9100 and have installed rom 2.16.9 and i also have activesync 4.1 refusing connection to my pda. After some googling i have found this interesting site: http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x-connection.htm
I did cheks described there and found out that activesync doesnt have any network adapters and/or activity. USB driver installs, but it, again, doesnt generate anything. Maybe problem is there?
Ehhh... I even cannot return to any previous rom version, because there is no rapi for updaters to work with
reverting back to original cingular rom
How would you go back to original ROM using Lokiwiz tool if your active sync was working OK?
Thanks,
Each time I have done HARD RESET--I uninstalled active sync from my computer AFTER DELETING PARTNERSHIP. I deleted PC from Active sync on my 8125. I deleted all files on my computer related to active sync using search.
I then reinstalled active sync 4.1, being sure WINDOWS FIREWALL was off. I went thru all the steps with my TREND MICRO VIRUS PERSONAL FIREWALL EXCEPTIONS listed on http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
and I got it to work (1st install always takes time for calendar)
Hope that helps--it seems ridiculous to have redo all that-but so be it.
I'd like to know how to get back to CINGULAR ROM as I am still in 30 day return window.
Well there is a magical combination of buttons as described in http://forum.xda-developers.com/viewtopic.php?t=37386 (somewhere around 2-4 page):
Voice+Camera + Reset. Colored bootloader shows up. After that you can connect it to usb and run .exe with rom you want.
The problem with me is that i dont use any 3rd party firewall (i have hardware router for my connections)
reverting back to original cingular rom
You don't think there would be a problem going DOWN in ROM'S?
Do I need to UNLOCK again first?
I must confess. I did (i think veeery lucky) sucseded in running activesync. Altough what was the cause i cannot say. I reverted to 1.6.7 version of the rom. and reinstall everyting several times. and reboted several time. and i saying loud magical words. (and deleted checkpoint vpn software that i have installed). AND it worked!
Maybe trouble was in vpn soft, but it worked pre 4.1 activesync. So... Here is my experience.
Boki said:
I have Qtek 9100 and have installed rom 2.16.9 and i also have activesync 4.1 refusing connection to my pda. After some googling i have found this interesting site: http://www.pocketpcfaq.com/faqs/activesync/tshoot-as4x-connection.htm
I did cheks described there and found out that activesync doesnt have any network adapters and/or activity. USB driver installs, but it, again, doesnt generate anything. Maybe problem is there?
Ehhh... I even cannot return to any previous rom version, because there is no rapi for updaters to work with
Click to expand...
Click to collapse
Thank you very much for this link, it helped me to find the reason. It's not new ROM fault. The Microsoft Firewall Client (ISA 2000 component) on desktop blocks communication between PDA and desktop. I disabled it and now ActiveSync works fine.
Thank you again.
Your Are Welcome
The final version of WMDC was posted today. See the link below as the Windows Mobile Device Center Page hasn't been updated yet.
http://www.theunwired.net/?itemid=3591
Or download directly
Download x86 Version Here
http://www.microsoft.com/downloads/...ea-9df9-4920-af33-3a0e2e4e7beb&DisplayLang=en
Download x64 Version Here
http://www.microsoft.com/downloads/...aa-bc6b-4864-8ffe-dc26e1d9f843&DisplayLang=en
Please reply if you have any success syncing the blue angel.
Can someone please upload it or provide alternative link. I cant seem to download it directly from microsoft. Thanks
firebird said:
Please reply if you have any success syncing the blue angel.
Click to expand...
Click to collapse
Hi, did download (the latest on MS website), install and use it without any trouble. It found my exchange setting on my BA and applied them without even asking me! This was last night, will see what happens today!
@ daddy_yankee1980: It is an upgrade to Vista with all the verification required, so even if it is uploaded you will have to be online and connected to MS website (I think).
it is "Microsoft Windows Mobile Device Center Driver for Windows Vista"
not the app
All the beta branding is gone from the application too - so I think its both driver and app.
Maybe you are right, i wont use vista just yet they have to fix a lot of bugs until i start to use it daily
here is links for both builds
x86
amd64
I'm currently using the Helmi AKU3.5 1.4Beta with no sucess to be detected, what rom are you using ?
Are you running the final version of the WMDC ?
Still problems with Vista
I installed the Windows Vista Mobile Device Driver Update Final, but my MDA Vario I is not connected. It is not recognized anyway. Any ideas how to solve this issue?
Thanks.
Markus
RUU
I am using Vista with final WMDC released driver with O2 Atom.
I am able to properly sync. No problems. However I am not able to update the ROM. It goes upto the sensing screen to display the current ROM on device and to be updated ROM info. etc. In the next screen it hangs and after some time of about 1 minute the device update utility says that it is not able to update the device. I even disable the firewall to check if it is issue with firewall. But nope no help. I again checked it with windows xp and active sync v. 4.2 where everything works perfect so no issues with O2 atom.
Any help is appreciated.
SX66 WM5 synched successfully
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.
I'm still not able to sync in Vista with WMDC. My BA is saying:
Connection Not Valid: unable to open the connection '`USB'. This Connection is no longer valid or does not exist. Select a different connection and try again.
Click to expand...
Click to collapse
I'm going to try a hard reset on my BA and see if thats the problem.
brandonm said:
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.
Click to expand...
Click to collapse
Since I just installed WM5 on my SX66, I was unaware that AciveSync does not backup WM5 devices. I purchased Spb Backup and that works better anyways.
It Works
When I plugged my device in today, the system was able to find drivers. All is good now.
I'm trying to upgrade to a WM6 ROM, and I am having problems. Vista keeps telling me the update utility has stopped working right after it restarts my phone into the bootloader.. Does anyone have any experience doing a ROM update with Windows Vista??
I cannot get any rom upgrade to work under vista and mdc. I too am trying to update to wm6 but without any success. It is really pissing me off.
One of the reason I'm not upgrading to Vista yet even tough I've got my business version for free...... Does it work if you try putting the phone on bootloader before starting the utility in vista?
This was a problem I had yesterday. Because i'm having a Vista only PC I went to my neighbour and updated de WM6 Rom there in Windows XP. When I came home again and wanted to install some things like Pocket IRC and Total Commander the problem still exited.
Then I decided to take a peek on Windows Update for Vista and there was a ActiveSync update for Vista. Now everything works fine now I've updated it. Maybe you could do try the same thing.
Crazyrooster said:
This was a problem I had yesterday. Because i'm having a Vista only PC I went to my neighbour and updated de WM6 Rom there in Windows XP. When I came home again and wanted to install some things like Pocket IRC and Total Commander the problem still exited.
Then I decided to take a peek on Windows Update for Vista and there was a ActiveSync update for Vista. Now everything works fine now I've updated it. Maybe you could do try the same thing.
Click to expand...
Click to collapse
Hmmm.. Vista doesn't use ActiveSync. It uses Windows Mobile Device Center.....
ruskastud said:
Hmmm.. Vista doesn't use ActiveSync. It uses Windows Mobile Device Center.....
Click to expand...
Click to collapse
This is true. I'm to damm used to the old name. But whitout the update I didn't saw the old sychronisation pictogram in the taskbar. After the update it appeared there and everything worked liked it should. Before the update it was impossible to install roms and other applications voor Windows Mobile. Now it works fine. It was an update called something with "Windows Mobile Remote Adapter" in it.
this has been covered already use the search function.. you can dual boot using vmware and so on..
Anyone got any problem when upgrading Rom on WIndows Vista and using the Windows Mobile Device Center instead of the traditional ActiveSync? It won't seems to connect to the device again once the device is restarted into the RGB screen [after the starting the Rom upgrade process]. After a few seconds, it got the connection error code on your PC. I soft reset the device and no upgrade has been installed. Any ideas?
I try removing the connect via USB check box and use Mtty to check the connections to my device. But after I have done that, the PC won't connect my device to my computer at all... hence, I can't get use Mtty to check the connections.
So I have no idea why this is happening on Vista. It works fine when I am using my old XP computer when I upgrade to the test ROM. Any suggestions will be appriciated. Thanks a lot of your help in advance.
Pete
http://www.modaco.com/Upgrading-to-Vista-Be-aware-RUUs-wonand39t-work-t251768.html
Looking to upgrade to Windows Vista? You might just want to keep an XP partition on your machine, as ROM upgrades via the normal RUU client do NOT work from within Vista, due to changes in the way the OS accesses the device. This also prevents IMEI-check unlocks from working on Vista.
Click to expand...
Click to collapse
Problem lies with vista, but I have read somewhere a solution is underway, or allready here...
Hello.
Im new here, first of all sorry for my english, and second thanks for this forum.
I have problems with upgrading my Siemens SX66 WM6.0 pro to a WM6.1
The ROM upgrade software tells me there is an Error 101: Connection Error
exactly like this
bilbo--baggins
Every time I try to do the rom upgrade for my PDA2K the device does a soft reset (when it's reset it then reconnects to activsync, and the green logo reappears) and after a while the ROM upgrade software tells me there is an Error 101 Connection Error. It's driving me nuts, I've tried all sorts of variants, soft reset first, hard reset first, USB port, USB2 port, Activesync 3.7.1, activesync 3.8, Windows XP, Windows 98. I don't understand why there is a connection error, because I can connect to activesync correctly, it even reconnects after the ROM upgrade causes it to do a soft reset. Please help! I've even tried following directions to copy the temporary files and running those directly but the result is the same.
Click to expand...
Click to collapse
can anyone help to solve this problem.
i have no problem with active syn connection, its synchronized with out any problem. my OS is winXP sp2.
This is a well known issue, I am sure its addressed in the Wikki on this site. The solution is don't reset your device when the on screen instructions ask you to do so, just continue with the upgrade.
Enjoy your new device once you have upgraded.
ok
i run upgrade program, the i like in instruction i put sx66 in to the cradle, active sync starting to synchronize well. then i push the next button in the upgrade program, the active sync is turning off and after couple minutes there is a message 'bout Error 101
p.s. the upgrade file i download from this thread http://forum.xda-developers.com/showthread.php?t=372485