Please, help!
I am unable to persuade my AS 4.0 sync with my newly upgraded mda III. If I downgrade to wm2003SE, it works again, but when I try wm5, it does not do anything. Sometimes there is a signal: the first sound of the upwards connection signal three times, then nothing happens.
When I first upgraded to wm5, a found new hardware appeared and intended to go to the net for some driver. I said OK, then the installation failed after a few seconds. That was the only occassion of any real activity between the MDA III and AS4.
Via Infrared, it works fine, but it is very slow.
Any idea? Or any forum about this, I really tried to find one but found nothign so far.
Thanks a lot!
barrney said:
Please, help!
I am unable to persuade my AS 4.0 sync with my newly upgraded mda III. If I downgrade to wm2003SE, it works again, but when I try wm5, it does not do anything. Sometimes there is a signal: the first sound of the upwards connection signal three times, then nothing happens.
When I first upgraded to wm5, a found new hardware appeared and intended to go to the net for some driver. I said OK, then the installation failed after a few seconds. That was the only occassion of any real activity between the MDA III and AS4.
Via Infrared, it works fine, but it is very slow.
Any idea? Or any forum about this, I really tried to find one but found nothign so far.
Thanks a lot!
Click to expand...
Click to collapse
Have you read the WiKi about setting the IP and disabling the firewall?
Related
Hello everyone,
I have problems updating my SPV M3000. I've been tryin' it for a month now but it just won't happen. Every Rom i download i get the same problem: I just follow the steps of the wizard. But when the installation begins, my device's screen flickers and then it looks like it starts to glow. At the same time my activesync connection drops. The PC gives the [ERROR 260] this makes sense because i lost the connection. Then i have to soft reset my phone. I have Sim and CID Unlocked the phone.
My current version is 1.3.1.13.
Can somebody please help me.
thnx,
Dennis
have you tried changing your use cable? Seems like it's the source of the trouble...
dbleliev said:
Hello everyone,
I have problems updating my SPV M3000. I've been tryin' it for a month now but it just won't happen. Every Rom i download i get the same problem: I just follow the steps of the wizard. But when the installation begins, my device's screen flickers and then it looks like it starts to glow. At the same time my activesync connection drops. The PC gives the [ERROR 260] this makes sense because i lost the connection. Then i have to soft reset my phone. I have Sim and CID Unlocked the phone.
My current version is 1.3.1.13.
Can somebody please help me.
thnx,
Dennis
Click to expand...
Click to collapse
Have you tried flashing an "official" 2.xx rom?
--M
I did all of that... but still no succes.... Anybody have other solutions??
Thnx
Did you ever get your issue resolved?
I've got the same problem and I've tested my MDA with two seperate USB sync cables. Both sync with ActiveSync and actually transfer data with no issues, but I get the 260 error EVERY time.
Does anyone know if there is a MS service that needs to be running that maybe we're missing? I thought all of mine were, but might not be.
Any updated info would be WONDERFUL.
Read this, at the bottom of the file are the error-codes and try to use another USB-port (preffering at the BACK! of your PC)
ftp://xda:[email protected]/Wizard/Roms/ROM/Update Utility Readme.rtf
nabibakhur said:
Did you ever get your issue resolved?
I've got the same problem and I've tested my MDA with two seperate USB sync cables. Both sync with ActiveSync and actually transfer data with no issues, but I get the 260 error EVERY time.
Does anyone know if there is a MS service that needs to be running that maybe we're missing? I thought all of mine were, but might not be.
Any updated info would be WONDERFUL.
Click to expand...
Click to collapse
Maybe try to use activesync 2,5 beta.
Actually, I have the most recent ActiveSync beta and all. And that nice ftp link doesn't work, which I've noticed seems to be the case most of the time.
Can I download that file elsewhere?
I've actually plugged the USB cable in every USB port I have to test that theory and still no-go.
I'm currently on the phone with T-Mobile PDA Tech Support ( BLECH! KILL ME NOW! )
If I get a solution I'll post it and a walkthrough on how to fix it.
Ok, so, just got off the phone with the T-Mobile PDA Tech Support people and here's the lowdown...
It's the phone itself. Somehow my phone is bugged, go figure. Sorry to break the news to the guy who started this thread, but hey, I'm getting a free T-Mobile Dash out of it
i thought to ope a new thread about this.
i tried to get bb connect on wm6 (at&t) versions 2 and 4.
i didn't get any of them to work.
did sombody succeeded in the meantime?
is there a new version coming up?
hope te hear...
Tried them both too on my 750C w/ WM6, unsuccessful. Right now I am on BBC 4.0.0.90, still not working, getting from: No Connection -> Network Available -> Data Tunnel Available (at this point gets an IP address) -> No connection. The PIN is never generated so BBC is unusable for now. I was following a thread, http://forum.xda-developers.com/showthread.php?t=294218 , tried to modify my AKU version (didn't try to modify the build in the ROM though) w/ no results.
In the mean while, Hermes/ATT 8525 w/ WM6 and BBC 4.0.0.90 works just fine. What are we missing here ? Anyone w/ a clue ?
I am happy that someone opened a thread for this, I hope we'll get a fix.
Thanks,
HC
i've upgraded mine with wm6 non attws , unable to connect on bbc4 as well
does anybody know the latest b uild of the bb connect software (and where to get it)
i have (downloaded from vodafone nl)
blackberry version 4.0.0.67
transport version 4.0.0.70
and does anybody has a list of new features in later releases
I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC
i'm on 750v wm6.0 vodafone and can't get bbc4 to work
not even 2.1
argh!
pissing me off!
I recommend you just to wait a couple of days with the device switched off. I have a HTC Touch, vodafone, Germany. Downloaded Blackberry 2.1 and 4.0, didn't work. Never got a PIN ("PIN pending"). Read somewhere that it worked after a couple of days, so I switched my device off and was frustrated. I even wanted to sell it on eBay already. After 2 days I switched it on again, and, guess what, I had a PIN in the Blackberry software!!! Then I configured my Touch using BlackBerry Activesync Software, and it's now working!!!!!!!!!!!!!!!!!!!!!!!!! Version 4.0!!!!!!!!!!!!!!!!!!
So my recommendation: Try to wait 48 hours.
Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.
georgedorn said:
Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.
Click to expand...
Click to collapse
Wrong. I have been using BBC 4 on my Hermes for months with AT&T and as far as I know the Hermes is supposed to be a "blocked" device. It's not that RIM is blocking it, it's that the software has to be HEX edited to work with WM6. No version of BBC will work on WM6 on the Treo until someone smarter than me can cook up a ROM that is HEX edited to run BBC.
Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...
BBConnect for WM6
gnyf said:
Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...
Click to expand...
Click to collapse
I just got this and it works perfectly on my S710. I had got wipe the device and do a fresh install of the application. Give it a shot. Make sure you have an Active Sync connection to your device before trying to install.
http://sems.org/content/download/bbc4/bbconnect_wm6_standard_bb_4.0.0.84.zip
On the AT&T Rom you get Uncertified System Software detected on the install. I assume this is because the S710 is a smartphone rather than a WM device?
Strange thing today on my 750c - Got PIN
Hi all,
It seems that something is changing w/ either RIM or ATT. I installed again today BBC 4.0.0.90 onto my 750c w/ WM6 ATT leaked ROM, after the normal reboot, surprisingly, BBC service connected to the network and I got a PIN. Clearly it said "Connected" on the status tab. Well, I connected the device to my laptop and ran the BBC Desktop, the system was provisioned properly (I think ...), Notes Backend, but now it fails to connect to Blackberry, same symptoms as before, even after multiple soft resets, see comments above. I'll play around some more w/ it and let you all know if I get anything to work. In the mean while, if anyone else has any success, please share ....
Good luck
HC
PS. Posted this in the "Palm Treo 750" forum too ... hope I don't bother anyone
hchickers said:
I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC
Click to expand...
Click to collapse
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
hb88xx said:
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
Click to expand...
Click to collapse
Still doesn't work. I tried to install/uninstall etc. w/ same results, no connection. I am using the leaked ATT rom which otherwise works fine, no strings mods, just the rom w/o any modifications.
Hope this answers your question.
Good luck,
HC
BB Connect from HTC
Anyone have tried this ?
[email protected] said:
Anyone have tried this ?
Click to expand...
Click to collapse
Just did it, same result, no connection. I am uninstalling it right now. Too bad. Again, I think it has to do w/ the device type not the software itself. I have a 750C w/ leaked ATT rom
Anyone w/ other results ?
Thanks,
HC
Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.
mils said:
Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.
Click to expand...
Click to collapse
What kind of device ? 750C or 750V etc.
Thanks,
HC
750V with Vodafone WM6.
Now it flashes with an IP for about a second.
I have upgraded from a Hermes to Kaiser (Voda 1605 to 1615) and hence am trying to upgrade my Hermes to WM6 using the official HTC ROM.
It al starts perfectly fine, but after the Installshield wizard starts, and after I accept everything the screens asks for I get a message saying that there is a problem with the connectivity. The Error number I get is 264.
I tried a hard reset and then de-activated all the programs on my laptop like firewall, antivirus, antispyware etc, in fact I disabled everything from the startup tab in msconfig.exe and restarted the whole process, but still the same problem and same error number.
Has anybody else encountered similar problem? Any help will be appreciated.
first of all, I want to say THANKS for this great forum, which has helped me greatly souping up my Tilt, solving problems, getting great CABs, and just general info.
I had to hard-reset (removing bloatware) my device a few times, once because of a faulty usb connector, and I couldn't sync anymore. so now I'm stuck only with bluetooth (still trying to figure out if I can hardSPL and load a new ROM via bluetooth...)
I'm not in the US, so I don't use ATT/Cingular. and I ran into connection problems using GPRS. had all the right settings, but just couldn't connect to my service provider.
of course I searched endlessly on these forums, but couldn't fix my problem. today, found and ran removeHiddenProxy4CWS_0522 cab in the \Windows directory, and everything worked perfectly !!
I don't know if this is a Tilt-specific thing or not, just wanted to help out anyone having my same problem, of using a diff provider than whatever came pre-loaded...
Hi to all
I've the same problem that many people have, as I've seen here in the forum.
Quick gps doesn't update anymore. I've tried all the registry tweaks that I've found but nothing. I've written to HTC but they don't have answered.
I've tried quickgps from kaiser but without success. So, I should do an Hard reset but I want avoid it. Is there someone that has the cab for the diamond's quickgps ? I've seeked here and in other forums but I don't have have found anything. Perhaps reinstalling the original cab should resolve the problem.
My quickgps version is 1.0 build 1815.2630. Rom is 1.37 official from HTC, italian.
Thank you very much to all
here you , QuickGPS 1.04
indie said:
here you , QuickGPS 1.04
Click to expand...
Click to collapse
Thanks a lot
Now I go to test it !
indie said:
here you , QuickGPS 1.04
Click to expand...
Click to collapse
Sorry, but perhaps I don't have explained myself well.
The file you've attached is GPStest to test gps connection. I am seeking quickgps, the cab that allows internal gps to fix faster.
Sorry for misunderstanding
you can get it from here i think
http://forum.xda-developers.com/showthread.php?t=355277
indie said:
you can get it from here i think
http://forum.xda-developers.com/showthread.php?t=355277
Click to expand...
Click to collapse
Thanks a lot, but I have tried it yet. I think that only the specific version for diamond go. When i try to install another version it says me "digital signature with certified reliable not available" etc.
Perhaps because another version is yet installed, but, being in rom, it's impossible to uninstall it. So I wanted the same version installed to overwrite it hoping it will function well.
QuickGPS connection failed
hi all.
i am also having some trouble with my touch diamond (p3700) & quickGPS.
i've had the p3700 for 2 months, and so far so good. i used quickGPS when i first got the p3700 and all worked well. i have loads of apps installed, and around 5 GPS included ie. GarminXT, Route66, iGO8, MapKing2007 etc. all have been working well.
yesterday i decided to update the packedEphemeris data via quickGPS, and after multiple attempts, each attempt would advise "Connection failed try again later"
the next thing i have noticed is that all my GPS apps cannot connect to satellites any more. i tried by leaving my p3700 connected in my car with a clear view of the sky, and even after an hour or more, none of the GPS apps successfully ocked onto any satellites.
in comparison, my other HTC (artemis) p3300 was able to lock onto satellites within a few minutes or less with any of the same GPS apps, also i downloaded the latest packedEphemeris data via quickGPS successfully while i attempted to do so with p3700 yesterday and today. so i know its not anything to do with wifi et al. connections etc.
nothing new has been installed, nor uninstalled on the touch diamond...
so whats up with that???
i have sent an email to HTC support and am awaiting their advice.
i really don't want to have to resort to a hard reset, as installing all those apps will take me a day.
anyone can post their quickGPS reg folder please... from their TOUCH DIAMOND
thanX
I have had this problem where Quick GPS will not update, either from ActiveSync (as it did automatically before), via WIFI or 3G/HSPDA. Whilst at the same I found that You Tube will no longer work so there is definitely some issue with it. By doing a hard reset got it to work again but I think at some point it will stop, so any answers will be most useful (for us all!).
GPS and Internet calling
Everything was working fine unless I installed WM6 Voip application to use my Diamond to make internet calling, thereafter no GPS recognition by tom tom and no luck with Quick GPS as well. Hard resetting the device solved the problem and again I installed the WM 6 Voip application and again no luck with GPS. I did that three times and concluded that unlocking WM 6 Voip feature blocks GPS ports. If you are using WM 6 Voip then you might not be able to use GPS as I experienced.
I have the same problem:the quick gps won't update.If you find anything as a solution please inform!
Solution with Quick GPS update.WORKS!
This solution works and has nothing to do with registry hacks,installing cabs etc..Well lets start:
1)Open Internet Explorer from your Diamond(Start-->Internet Explorer)
2)From the Favourites menu go to the HTC web page(should load,normaly)
You are done!Go to the quick gps and now you can update as before!(It seems that the Diamond losts his way to the internet but as soon as you go to the HTC page,the way described here,the problem is solved!)
thanks for that, just tried it and it worked perfectly!!
Very weird, I had the same problem and the IE trick worked.
Thank you, elflost
I'm having the same issue with quickgps not updating and getting a a connection error. I tried the IE trick but it still didn't work. Any other ideas?
OMG that's crazy!
I was trying all sorts of things and I just opened IE (first time I ever have as I've been using Opera instead) and now both QuickGPS and the YouTube are working again.
Thanks very much for posting, now I don't have to waste anymore of my evening looking for solutions.
Cheers.
The trick with IE solved the issue with me too. That's a bit weird, every other programs are able to find the internet connection through wifi..
lazerin said:
I'm having the same issue with quickgps not updating and getting a a connection error. I tried the IE trick but it still didn't work. Any other ideas?
Click to expand...
Click to collapse
Same for me... However I didn't have HTC in my favs... But I tried entering manually and still no luck
it works!!!!!!!!!!!!!
thank u!!!!!!!!!!!!!!!!
Quick GPS (and you tube) not working
Excellent ! excellent congratulations ! It worked for me too !! I wish HTC support were a bit more awake and gave some basic but good afvises ! THANK YOU !
Fantastic post - worked perfectly on my Diamond running Google Maps. Thank you!