att tilt gprs problem/solution - Tilt, TyTN II, MDA Vario III General

first of all, I want to say THANKS for this great forum, which has helped me greatly souping up my Tilt, solving problems, getting great CABs, and just general info.
I had to hard-reset (removing bloatware) my device a few times, once because of a faulty usb connector, and I couldn't sync anymore. so now I'm stuck only with bluetooth (still trying to figure out if I can hardSPL and load a new ROM via bluetooth...)
I'm not in the US, so I don't use ATT/Cingular. and I ran into connection problems using GPRS. had all the right settings, but just couldn't connect to my service provider.
of course I searched endlessly on these forums, but couldn't fix my problem. today, found and ran removeHiddenProxy4CWS_0522 cab in the \Windows directory, and everything worked perfectly !!
I don't know if this is a Tilt-specific thing or not, just wanted to help out anyone having my same problem, of using a diff provider than whatever came pre-loaded...

Related

I Can't Connect my Tilt...HELP!!

I've searched for an answer in these forums and can't find one. I have tried some suggestions from here to no avail. Well...here's the problem. I've had my Tilt for a couple of months. All has been great and i love it...up until now.
I've put several roms on it and they've all worked fine. Got that down...I thought. I can't get activesync to see the tilt on any of my computers. It won't find it on the laptop I've been using to load. My desktop at work, that I've been using sometimes to load it, won't see it and it won't even connect on a new computer in my office with fresh ASync 4.5. Like I said....it has been working fine I just decided today to load a new Dutty rom and I can't even hook up. Wow....this is so aggravating. I've uninstalled and reinstalled several times. Activesync is still on the tilt too. I've killed the program in taskmgr. I've stopped all running apps in the tilt. I have 2 different cables also. By the way....I don't care to wipe it clean...if I need to. Any suggestions as to what I can do? If anyone's got any clues to what my problem could be I would be eternally grateful. Thanks in advance for responses.
Desparate!
Please help me....if you can. I know there's a tremendous amount of knowledge here. Surely someone's been through this same problem and was able to fix it. I've seen another post similar to this and he's not getting an answer to his problem either. If I we need to contact HTC....please recommend that. Some of you "tilt masters" please respond. Thanks in advance.
Also I had a similar problem and i had installed a blackberry program on my tilt. That created a connection problem between my tilt and the sync program and it couldnt see my tilt. I figured out that the blackberry desktop program thought it had dibs on my tilt because the bb was on my tilt. I removed the BB off my tilt it did a hard reset and then proceeded to manually remove every windows mobile device partnership there were many. Rebooted my computer and tried it again and it worked. You could try a hard reset and then and then use system restore to a few days before you had the problem and see if you can trick it.
I had this problem.
Hard-Reset fixed it
Thanks for the replies....I've tried the hard reset twice and that didn't work either. Have been on the phone with HTC support and we did several things. Still not working. He was supposed to call me back in 10 min but didn't for a couple of hours. Anyway...I've got to contact them back and take up where we left off. Surely we can get this thing going again. If HTC can fix it....no one can. When we get it up and going...i'll report back here for others future needs. The phone works great besides that!
Again thank....and anyone else have a suggestion.
Please respond to...
http://forum.xda-developers.com/showthread.php?t=362679
Thanks..
Check the USB pins on the unit, mine were bent down and did not make contact, i think from memory the 3rd pin in is the data connection.
Derek

Wifi Problem Connection!!!!

I need some help, I upgrade my Rom to the Dutty's WM6.1 and the Radio to 1.58.16.27, but now my Wifi is not working, actually, find my router signal but it cant connect it, i dont know why, I already put it in Best perfomance but nothing happens.
Does anyone know what to do???
Thanks
Sorry about my bad english.
Did you go through the wifi set up?
Maybe you just need to type in the password for either PSK or WEP encryption.
Your english is just as good as mine so no need to appologize.
Have you tried another Access Point? I have posted in an older thread about this.
http://forum.xda-developers.com/showthread.php?t=376003
Not sure if any of this applies to you or not. Hope it helps.
thanks for your concern, i've tried 3 differents access points but nothing happens, in my wifi settings i can see my router signal, it says connecting, but stay connecting and never connects. the same happens to the other access points. it has the password writen and everything.
Do you have another solution maybe?
thanks
Did you type the password previously during set up?
Or when you were going through the setup, you see a bunch of asterisk (*)?
If its the latter... erase all of the asterisk (*) and retype the password.
thanks, but still having the same problem, is trying to connect but never connect it....
I dont know what to do now, I try everything!!!!
Possible fix
see my post here: http://forum.xda-developers.com/showpost.php?p=2060140&postcount=83. I had the same problem as you. I think it has to do with some DHCP registry problem, but don't know much about registry settings so not sure.
Im trying but still happen the same thing, the arrows are going to the opissite directions that means that is trying to connect, but nothing happens.
thanks for that post, if anynoe has the solution please help me,
Do i have to try a different Radio?
please let me know
thanks
Maybe somebody with the same problem?? or any thread???
thanks
Does anybody has the solution or maybe something that i can try???
thanks
ooops delete
I had a problem like that when I tried to connect to my access point. I don't know for sure what caused it but it suddenly started working after toying around - one of the things I did was gave it a static IP address rather than using DHCP (which I prefer anyways tbh), it does indeed seem to be DHCP related.
I did the same thing, it connects to my router but i cant get internet (surf, messenger, weather, etc) , nothing, just its connected but nothing happens, maybe the radio version? i dont know what to do!
I still have the problem!!!!
Any solution please!!!!
I need some help
thanks
same problem here. wifi was working just fine yesterday. today, after charging over night, i try to connect to my network at home and it keeps saying connecting... but it never establishes a solid connection. also tried other available networks while i was out during the day, and it did connect, but then it couldn't access the internet, not even to update my weather on my today screen. haven't flashed recently, haven't hard resetted. only thing i did between the last time it worked and until now was active sync to transfer music from my computer to my SD card through usb (my card reader doesn't support SDHC) and charged it over night. I've transferred files from my computer to my phone in the past without any problems.
any help is appreciated!! thanks!
xxfoolxx said:
same problem here. wifi was working just fine yesterday. today, after charging over night, i try to connect to my network at home and it keeps saying connecting... but it never establishes a solid connection. also tried other available networks while i was out during the day, and it did connect, but then it couldn't access the internet, not even to update my weather on my today screen. haven't flashed recently, haven't hard resetted. only thing i did between the last time it worked and until now was active sync to transfer music from my computer to my SD card through usb (my card reader doesn't support SDHC) and charged it over night. I've transferred files from my computer to my phone in the past without any problems.
any help is appreciated!! thanks!
Click to expand...
Click to collapse
i hope this help... it's not a technical response, but good luck
this response is horrible, but i had the same problem. I changed my router and now it works fine. old: BUFFALO, new: BELKIN N1 Vision. I figured out that the unit has some intereference problems... my old BUFFALO work in another appartment well with my Kaiser but not at home... (tried moving BUFFALO from my house to another neighborhood house and works fin...)
it can't be the router that's causing the problem because it was working fine up until now. i've also tried other networks, and it will say that it is connected, but then i'll try to view a page and it won't load.
i've been using Dutty's WM 6.1 Rom that was released on April 9 and using the NIKI Radio 1.58.16.27 for about a week before this problem started also, just like jmcorral.
xxfoolxx said:
it can't be the router that's causing the problem because it was working fine up until now. i've also tried other networks, and it will say that it is connected, but then i'll try to view a page and it won't load.
i've been using Dutty's WM 6.1 Rom that was released on April 9 and using the NIKI Radio 1.58.16.27 for about a week before this problem started also, just like jmcorral.
Click to expand...
Click to collapse
Same here. I think it's Dutty's rom...no offese to Dutty. I bet other people got it to work, but I've had Dutty's WM6.1 Hybrid and the NIKI Radio 1.58.16.27 and I've tried a bunch of other radios with no luck. I'm going to try and switch roms and see if that helps at all.
Kraize
Wifi not connecting
Maybe this will help.
If you have Duty ROM, check that Network Plugin is not activated.
I also solved the same connectivity issue for a friend that is using the the ATT original ROM. The problem was the battery settings. It was set at maximum savings.
sorry for the noob question, but where can i find if the Network Plugin is activated?

Trinity upgrading and settings on O2

Hi all, first can i give a big thanx to all on here who have contributed and made it possible for me to use my trinity again after an awful "upgrade" to an LG Renoir, may it rest in peices.
After following all the relevant steps my old Trinity is now working a treat so i thought i'd post and mention some of the possible pitfalls that a complete noob like me might have to deal with.
First was error 260 that i read quite a lot about but could not fix. having followed the relevant steps for using Vista to upgrade, including updating the USB driver i kept getting error 260. This was easily fixed eventually by using all the same cables and ROMS and radio version by using a PC running XP instead.
If you want to update your radio version, as i did to get GPS back working, i copied the relevant radio RUU_signed.nbh file to a FAT32 formatted card and renamed it trinim.nbh and inserted the card in to the phone. The update started automatically, finished, the phone reset and hey presto, new radio and working GPS.
Eventual;ly i had an unlocked Trinity working with an O2 SIM card but could not use the internet or push e-mail as i didn't know what settings i had to change or where to change them. After a phone call to O2 they told me as they didn't sell the phone they didn't support it and wouldn't give me any idea of the settings i needed. A quick internet search and i found a little app, i think on Modaco, that once you have your phone connected via ActiveSync you just run and select the network you want, all the usual suspects are there, and it updates your phone settings automatically.
All i need now is a new battery, charging every 6 hours is getting boring, and i'm good to go.
Sorry if this is long winded but for a complete noob, as i am, some times you need it like that.
Thanks again
Steve
o2 settings payg
Just for any one on payg here are the setting if above does not work for you
it did not for me.
APN address- payandgo.o2.co.uk
I.P address- 193.113.200.195
USERNAME - payandgo
PASSWARD - passward

Can't access internet on My Wizard

Hello all.
I first want to say that I have read this forum until I thought My eyes would bleed before posting any question.
I have a cingular 8125 (Wizard) that I recently upgraded to CR96 Touch HD Version 6.5.0.1.7 RC3 and I love the rom for the most part.
After installing it, I had internet access until just a few days ago. I assumed that it was that I was still running the old Cingular config file Cingular_Wap_Medianet_MMS_Settings.cab file that I have used for years, and maybe AT&T was trying to get rid of there old settings. I have searched the site, and searched for the settings to configure the connection.
I did not find a cab file for the wizard, but found the settings and manually entered them. I could not connect, nor could I access the internet.
I then located the htc HTC_Network_Wizard_Kaiser.CAB file, and tried running it, and could not find where it installed a program to run, nor did I see that it configured a connection for me. So, Back to reading.
I finally found an AT&T_Wap_MEdiaNet_MMS_Settings.cab file that actually allowed my phone to connect to the internet for my e-mail from my work. I still however cannot access the web. I thought maybe it was caused by an registry setting that I changed trying to move the bulk of my mail to the SD card. So, I did a hard re-set on the phone. I still however am only able to get the e-mail without web browsing access.
I have not been able to locate another person that has had this issue. Please help.
Liquidd
I also want to say that I have 90% signal strength, and am still unable to connect to the web.
does anyone know where I can find the ]HTC_Network_Wizard for the Wizard phone?
Does this mean that no one knows, or that I just did not ask correctly?
Could someone please send me the HTC_Network_Wizard for the Wizard file? I will beg if needed.
Liquidd

Dead Phone - Please Help

All,
I have been reading all day and I have tried everything I came accross so please don't flame me and tell me to read the forums! If I missed something I apoligize but I have been working on this all day.
Yesterday morning I used one of the recently popular kitchens that I have used before with success. After I made some tweaks and flashed my Tilt the phone boots up fine but I cannot connect to my at&t service or ActiveSync. At this point I just want to revert to a known good image but I can't connect to ActiveSync.
I deleted the releationship from the phone, uninstalled ActiveSync from my computer, re-installed ActiveSync, rebooted my computer and still nothing, along with many, many other things. WiFi seems to be working and possibly Bluetooth.
How can I get my phone back? I learned a lesson and I hate begging but I would like my phone back and I know this is the place to save it!
Thanks,
Tom
I am far from an expert, but in my experience forcing the phone into the tri-colored bootloader screen(hold power, camera, and reset) will allow you to update, when you cant establish activesync.
Resolved!
j0nnyb1aze,
Funny thing that is exactly what I did and I am back in business! Thanks!
No Image found !!!
Hello!
I did so but apear very fast No Image found !!!!, what should I do now?, I have read and I've done every step of the forum and not usable

Categories

Resources