Related
I'm getting to the connection page but then it goes back to the sign in.
Working great on my phone.
can you attach the ractrl.cab you used?
Never used one, basicaly i went to the website on my phone and logged on and it asked me to register my phone. ( am an existing user btw on Imate K-jam). Software downloaded automaticaly if I remember rightly.
trjons said:
I'm getting to the connection page but then it goes back to the sign in.
Click to expand...
Click to collapse
Just tested it and works nice.
Downloaded the RACtrlCE.cab more or less automatically. And then continue...
The only thing that makes me doubting is, that I remember I tested it before on this device. I threw away the RACtrlCE.cab from my documents folder.
Maybe not allowed to throw it away? I will test in the future.
But: Works perfect and the scrolling, by pointing in the corners, goes faster than on my Qtek 9100.
I miss the larger real estate of course.
Huib
I must have used the old RACtrlCE.cab because when I uninstalled it and tried again it worked.
Your in luck mate, I found the file. But I cant find away to upload it here.
yeah, connecting to logmein and installing the cab directly from website works great!
Sorry to revive this old thread but I found it to be inconclusive.
I have the same problem as the OP: I login to their website and see my list of computers...from that point on anything I click, be it a computer or the "my accounts" section, it brings me back to the login screen. It's a complete loop.
I've been using logmein a long time and I know that the .cab file is downloaded right after you choose which computer to connect to...but I can't make it that far on my AT&T Tilt. It's just a loop.
I went back to my PPC-6700 (HTC Apache) and used my WiFi to connect to logmein and had no problems whatsoever.
Any suggestions? Should I find the .cab on my 6700 and send it to my Tilt?
Thanks in advance.
I'm impatient so I went ahead and copied the .cab file from my 6700 to my Tilt...the result is the same.
It installed fine: no errors, no message that it was made for a previous version of windows etc.
However when I go to logmein.com and try to login, I am confronted with the same loop as described above.
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
avega1027 said:
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
Click to expand...
Click to collapse
Like I said, I can log in fine. Upon choosing which computer to connect to, it brings me back to the login screen. Typically, you would choose the computer you want to connect to and then it would realize you don't have the program installed and prompt you to do so. However, whether I have installed the .cab manually or before doing so, I cannot get this far.
I got my Tilt yesterday and the only tweaking I've done is with the KaiserTweak program from these forums. If anyone can point to a specific tweak that might effect this, I'll revert it...
After more testing I found a way to get access to my computer. Instead of clicking on the computer name, click on Edit. Then scroll down to where it says "Status: Online, Connect to this computer" - You can click on "Connect to this computer" and it will work.
After making it work I went back to my computer listing screen and tried to click on the name, as usual, and it went right back to the login screen. At least this workaround seems to work fine. I'll try uninstalling the software now and letting it install on its own and see how it works from there...
After uninstalling, rebooting, testing, reinstalling, rebooting and testing some more...I have been unable to replicate my "workaround" from above. I'm left clueless as to what the problem is here and whether this is just some dumb server problem on logmein's side. If anyone can help please chime in. tyvm
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Those having problems; are you trying to access logmein using the full web site - https://www.logmein.com or logmein for PDA's https://secure.logmein.com/pda/ ? The full web site gets me in a loop, but using the site for PDA's works perfectly.
FrankyG
TomErickson said:
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Click to expand...
Click to collapse
Yeup forgot to mention that. When I log in I disable the proxy.
If i remember correcly, i had this loop problem when using opera on the kaiser to surf on logmein.com .
Used PIE instead and no more loop problem.
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
jeffreii said:
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
Click to expand...
Click to collapse
i think its for cingular's internal sites...like ringtones and that kind of madness. i doubt you'll ever need it.
Hi all, I got the ATT Tilt, and unlocked it, am overseas right now, i donwloaded opera mini over a wifi connection when i was home, now i am able to access the internet using opera mini (which is how i am posting now), but PIE remains stuck on "loading". Because of this, I am unable to download anything. What can I do to fix this.
Edit: Got it working, I had to hard reset and let the AT&T customizations install since the proxy option in the programs menu isn't there without the customoizations, then in Programs > Tools > Proxy Manager (I think), there is an option to remove Proxy, I tried it and it worked, then I went hunting in the windows folder and found a file called removeHiddenProxy4cws....cab, copied it to the storage card and then hard reset again and canceled the customizations, tried IE again, didn't work. I then executed the aforementioned cab file and tried PIE again, and it worked. Also of note is that the cab file is there even if the customizations aren't installed, so if your PIE is not working (note, it is not working, some people have lag problems which is a different issue), all you gotta do is execute the file and the proxy setting for PIE will be disabled.
gamefreakgcb said:
Hi all, I got the ATT Tilt, and unlocked it, am overseas right now, i donwloaded opera mini over a wifi connection when i was home, now i am able to access the internet using opera mini (which is how i am posting now), but PIE remains stuck on "loading". Because of this, I am unable to download anything. What can I do to fix this.
Click to expand...
Click to collapse
I'm not sure if I had the same problem, but when I first got my Kaiser, I tweaked it like hell... and one of the tweaks was to set PIE cache to Stroage Card, and since I did it, PIE stoped working... in fact the whole device hangs and I had to soft reset...
anyway.. I changed the cache to the default, and everything works OK now...
I hope this could help
cheers
I had a similar issue when I first got my tilt as well. Not sure if this helps, but I had to run the little disable hidden proxy program which should be in programs/tools/proxy or something like that
You might have a look at this:
http://forum.xda-developers.com/showthread.php?t=337521
I noticed that on large websites (ebay, forums, etc) that PIE would stop about half way and freeze up causing me to have to soft reset. I started using the new DLL that I just pointed you to and PIE is fine now.
Problem solved, Check first post
Bump for problem solution.
first of all, I want to say THANKS for this great forum, which has helped me greatly souping up my Tilt, solving problems, getting great CABs, and just general info.
I had to hard-reset (removing bloatware) my device a few times, once because of a faulty usb connector, and I couldn't sync anymore. so now I'm stuck only with bluetooth (still trying to figure out if I can hardSPL and load a new ROM via bluetooth...)
I'm not in the US, so I don't use ATT/Cingular. and I ran into connection problems using GPRS. had all the right settings, but just couldn't connect to my service provider.
of course I searched endlessly on these forums, but couldn't fix my problem. today, found and ran removeHiddenProxy4CWS_0522 cab in the \Windows directory, and everything worked perfectly !!
I don't know if this is a Tilt-specific thing or not, just wanted to help out anyone having my same problem, of using a diff provider than whatever came pre-loaded...
Hi,
I have my HTC TyTn II here, and I wanted to reflash the ROM, which would of course mean the loss of all data on the phone/PDA.
I have backed up all my regular files (documents, emails, music etc.) but just as I was double checking I had everything backed up, I stumbled on my connections page, and realised that my connection details/login/settings hadn't been backed up (and of course why should they be?). Of course this is where the problem lies, I remember the host and all the information that is given to you, except the password is an obscure one I cannot for the life of me remember, but it is saved to the phone and all I see are ***'s. Is there any way of retrieving this password? I want to have an internet connection after I flash the new ROM, but I don't remember the password. (Is there a registry key I have to look at? Or an application that does it?)
If revealing the password is not possible, is there a solid means of backing it up?
By solid means, I don't mean, "Try this it may work" only to find out it doesn't work and have no connection for ages.
I have full access to the rest of the phone (of course!...in case you were suspecting otherwise...).
I really appreciate any help I receive on this!
If nobody has an answer, I suppose I will have to stick will this slow bloatware filled, old, brick of an OS (im sure you know what im talking about!)
Thanks again,
J250
most of the latest roms have a "connection wizard" that will detect your network and configure your device with the proper data connection settings.
If the rom doesn't have it, you can find that cab on xda-devs and install it
also whats stopping you from calling your provider and getting the settings from them? Finally have you tried searching xda-devs (or google) for your providers connection settings?
Hi,
Thanks for the quick reply. I should have made it more clear, the settings are not the default providers settings, they are on the phone too, but I know how to obtain those. Also, I did not know windows mobile would automatically try to obtain your settings, thanks for the info
It is an external provider, and I don't feel like rummaging around a mass of paperwork looking for a string of characters! (Only as an absolute last resort).
I have done some more research, and I found PocketAsterisk, which seemed to be perfect in theory, but in practise it didn't work.
Again, any help appreciated!
hello guys
I need to be able to use the internet sharing w/out signing up with AT&T , my phone is lock, can someone help me and let me know what can I do to activate the Internet sharing?
do I need to unlock the phone ?
do I need to unlock the sim card?
whats the eases way to unlock my At&t HTC Pure ?
I work outdoor in sales and I need to use my laptop all the time ..
please help....
julien01 said:
hello guys
I need to be able to use the internet sharing w/out signing up with AT&T , my phone is lock, can someone help me and let me know what can I do to activate the Internet sharing?
do I need to unlock the phone ?
do I need to unlock the sim card?
whats the eases way to unlock my At&t HTC Pure ?
I work outdoor in sales and I need to use my laptop all the time ..
please help....
Click to expand...
Click to collapse
are you trying to use internet sharing with no data plan? if so, that wont work
Like "leemoss84" commented, you can't use internet sharing if you don't have data plan, as internet sharing is using the data plan of your phone for browsing internet on computers.
But if you want to use the wireless (Wi-Fi) feature of the phone without using the data plan, disable the 'Proxy'
Start > Tools > Proxy Manager > Disable Proxy
also in the Settings > Connections > Select Network
select "My ISP" instead of MEdia Net
once you've done this, you can access wireless network without being charged by AT&T.
I do have Data plan
I do have a Data Plan with AT&T with unlimited internet, but At&t wants me to charge me an extra $60 a month! just for tethering with my laptop
or to use the phone as a modem.
I want to know if there is a way to jump the $60.00 a month they want to charge on top of the unlimited internet and voice plan Im paying now.
Thanks in advance.
julien01 said:
I do have a Data Plan with AT&T with unlimited internet, but At&t wants me to charge me an extra $60 a month! just for tethering with my laptop
or to use the phone as a modem.
I want to know if there is a way to jump the $60.00 a month they want to charge on top of the unlimited internet and voice plan Im paying now.
Thanks in advance.
Click to expand...
Click to collapse
To tether undetected, just make sure both your internet connections in "Settings\Connections\Connections\Advanced Select Networks" are set to MediaNet and take out any proxy server in "Settings\Connections\Connections\Tasks\Manage Existing Connections"
I do it all the time.
Bruce thanks, so I went to take out the proxy server in "Settings\Connections\Connections\Tasks\Manage Existing Connections"
I i see a message on the TASK tab " The Connection is pre-configured it cannot be modified
I didn't know that would work unless you use a custom rom. I wasn't able to tether untill I flashed with dutty's. after that.. a few changes (media net, etc. mentioned above.) and I was off and running..
can you please recommend how can I flash my phone?
at this moment I'm lock with At&t
what will be the best option to flash my phone?
step one assume you have topaz (htc pure) in my case
go here to this link http://forum.xda-developers.com/showthread.php?t=520312
then once thats done go here and choose your rom that you want to flash
http://forum.xda-developers.com/forumdisplay.php?f=486
I recomend NRGZ28 Max manila http://forum.xda-developers.com/showthread.php?t=562942
basicly when you download the rom if everything went well with step one just open the RUU file (looks like a topaz phone icon) and follow instructions. Make sure your phone is connected via sync
again this is a fast tutorial theres more detail ones around here in these forums
I had the same trouble when I first got the pure. There is a way to use ICS on the original rom. You have to change some registry values. I searched the internet and found the instuctions and it worked. But since then I have used many different roms that are better than the original and don't have that problem. I would recommend the energy rom. Remember to install hard spl first.
julien01 said:
Bruce thanks, so I went to take out the proxy server in "Settings\Connections\Connections\Tasks\Manage Existing Connections"
I i see a message on the TASK tab " The Connection is pre-configured it cannot be modified
Click to expand...
Click to collapse
Don't you have a app "Remove Proxy server"?
all of this is comepletly not needed . there is a reg edit that will handle this easily over on the att forum . ;-) just do some digging like i did no flashing or other programs needed .
xhozt said:
all of this is comepletly not needed . there is a reg edit that will handle this easily over on the att forum . ;-) just do some digging like i did no flashing or other programs needed .
Click to expand...
Click to collapse
might as well just install a simple app that is 2kb. it will save time considering you didnt post the edit and when you hard reset you dont have to go looking for it again, all you gotta do is install the app.
I will do some more research
then I need a app to manipulate the Registry on my HTC PURE with AT&T.
thanks guys
julien01 said:
then I need a app to manipulate the Registry on my HTC PURE with AT&T.
thanks guys
Click to expand...
Click to collapse
see 2 posts above. I posted the app here
http://forum.xda-developers.com/showpost.php?p=5802221&postcount=11
WOW ! I got it the HTC PURE AT&T Solution to install the latest "Hard SPL"
Wow!
First thank you for all your contributions and inputs trying to help me with my problem Flashing the HTC PURE AT&T
Here is what I did:...
I was having a lot of problems trying to install the latest "Hard SPL", specially with USB communication and even when my phone was connected via ActiveSync.
I tried the automatic Flash and the manual with no results........ I was about to give up!
Also I download the "enablerapinew.cab" and installed on my phone main memory and ran the .cab and I got the message "installation of enablerapinew.cab was unsuccessful"- so i was going NUTS ! and I tried another .cab files to see if I was getting the same error and .... same thing I tried different .cab files like TOMTOM , google maps and a Games and all of them gave me the same message !"installation of enablerapinew.cabwas unsuccessful"
mmm........
So what I did was I reset the phone to the Manufacturers setup ( you know entering the password) 1234 and the phone will be like the first time you turned on.
so after that I install the enablerapinew.cabb and the installation was successful ! and everything else work !
now I have the ROM i wanted ! and .....
KISS GOODBYE AT&T !!!
julien01 said:
Wow!
First thank you for all your contributions and inputs trying to help me with my problem Flashing the HTC PURE AT&T
Here is what I did:...
I was having a lot of problems trying to install the latest "Hard SPL", specially with USB communication and even when my phone was connected via ActiveSync.
I tried the automatic Flash and the manual with no results........ I was about to give up!
Also I download the "enablerapinew.cab" and installed on my phone main memory and ran the .cab and I got the message "installation of enablerapinew.cab was unsuccessful"- so i was going NUTS ! and I tried another .cab files to see if I was getting the same error and .... same thing I tried different .cab files like TOMTOM , google maps and a Games and all of them gave me the same message !"installation of enablerapinew.cabwas unsuccessful"
mmm........
So what I did was I reset the phone to the Manufacturers setup ( you know entering the password) 1234 and the phone will be like the first time you turned on.
so after that I install the enablerapinew.cabb and the installation was successful ! and everything else work !
now I have the ROM i wanted ! and .....
KISS GOODBYE AT&T !!!
Click to expand...
Click to collapse
yeah, a good hard reset will work wonders sometimes when you got a problem that cant be fixed. congrats.
so i have a question... i am running a custom rom on my phone, but my dad wants to basically do what the OP wanted, internet tethering without paying for the extra tethering plan. i cannot convince him to let me flash a new rom, likes the phone as is, just wants internet sharing. if i run that .cab on his phone, do i have to then make registry changes, or will the cab do all the work? what else would i need to do to give him his internet sharing?
2002wrex said:
so i have a question... i am running a custom rom on my phone, but my dad wants to basically do what the OP wanted, internet tethering without paying for the extra tethering plan. i cannot convince him to let me flash a new rom, likes the phone as is, just wants internet sharing. if i run that .cab on his phone, do i have to then make registry changes, or will the cab do all the work? what else would i need to do to give him his internet sharing?
Click to expand...
Click to collapse
Just install the cab.
AT&T tracks tethering through their proxy server, the reg edit just takes out the proxy settings as does the cab.
Its the same tweak, just different ways to get there.
To verify it worked go to Settings\Connections\Connections\Manage Existing Connections\Proxy Settings and confirm it is blank.
the "enablerapinew.cab" this CAB is for phones with problem installing the Hard SPL, the "enablerapinew.cab" will enable the phone to install the "Hard SPL" and them you need to flash the ROM , on my case I did a hard reset and them install the "enablerapinew.cab" them run the cab , and them flash the Rom, and after that I was able to share internet w/out problems