Related
SX66 BLUETOOTH Expired
Hi. I can not use Bluetooth since I downgraded from wm2005 to WM2003. When I set up Bluetooth, it says”
BTTrayCE
Sorry! Bluetooth can no longer be used because the license is expired
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73COABB9A9074DD3B175
3515CD8
Please help. Thanks. I have tried completed install from original rom CE nad Radio. But the same problem. The extended rom is dead I can not upgrade it since it faila at 1%.
Please help Thanks.
Hi
Did you carefully follow WM2005 -> WM2003 process described in wiki ?
It's very important that you resize, reformat ExtROM and do some other stuff before flashing back to WM2003.
Good luck
i have the same problem.. since octobre without solution
Hi
I ask again.
Did you guys restore your ExtROM correctly ?
(using Repart_DOC.exe tool)
GO to wiki -> blueangel -> blueangel WM2005 page -> how to downgrade....
Good luck
hi robal
I tried but when i use Repart_DOC
I set size 16384 or other sizes but if I click format now, the error message pops up"
Create handle failed.
Please help. Thanks!
Hi
Maybe You forgot to do as described in point "3" of downgrade process :
Prep your WM5 device by formating Storage and Hive.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse
This should've been done when you had WM2005.
I think it's important to do it, before trying to run Repart_DOC (on WM2003).
Any idea ?
If you've forgotten to do it. You probably will have to intall WM2005 again, do it, intall WM2003 and Repart_DOC it. HUh
have fun
DEAR robal,
Thanks for your information. In fact I did everything like you said before. but nothing help.
I know that I have to creat an extended_Rom in order to get it work. (this is not a big deal since we can install manually.
The most imfortant thing is the bluetooth error. Please help me find a sollutin for it. Thanks!
Hi
So you say, you have WM2003 installed with Extrom CABs from some official ROM ? OK
I'm not familiar with this BT failure. Please tell me exactly what ROM are you using ( CE , Radio, ExtROM )
And what version of BT stack you have.
This error is caused by a portion of the Bluetooth memory being overwritten by something else. The people who are trying to help you are right...you need to reflash the device because something didn't work correctly last time.
I had a tool that restored BT MAC-address, but I cannot find it on HDD.
It was sent by imate tech support as a fix for the "bt license has expired" error, so you may try to contact them, or search this forum.
please mamaich if you can find it this will be very helpful
Dear mamaich,
Thanks for your great imformation. I love to get it as soon as you find it. Again, thanks for your pricious time to repond.
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
new problem come out after previous one
hi, I have another problem so.. i need your help.
before, My sx66 problem with bluetooth and the Extended_ROM did not exist.
Now, after many tried to install rom from Tmobile, O2. sx66 over and over again, the extended_ROM is now okay to install but sadly the Storage doen't exist any more. Also some contact, task .. pop up after full installation. Finally,after extended_ROM Complete installed, window
Connection Flash Mangaer
pop ups" Saved data is corrupted.
System will erase all data to fix
this error
Yes No
but It does fix anything after I click yes button.
Please help to recover my storage. If there any software that can partition rom for ppc. please share.
p.s. the bluetooth now is freezing.
what u hv to do is use the Ext ROM Unlocker and use Repart_Doc...Set the size of yr Ext ROM...say 15 MB or so and then do the Repartitioning...now flash yr device...u will get yr Ext Rom Back with no such errors as reported by you
problem solved.
Dear hdubli,
Thanks for your help. Everything works properly now. Now my sx66 works at factory shipped. I am very happy.
Specailly thank to Hdubi for providing an exellent solution.
hdubli said:
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
Click to expand...
Click to collapse
Hi hdubli, a question, what is the ROM 1.4 of the blueangel?
My wife has a pda2k that the phone quit working on, the pda functions are fine. I was able to upgrade the rom and ext rom but when I try to upgrade the radio it always fails. I have been all over this site and the web nothing has worked to flash the radio. When the flash progarm runs I can see the rom and ext rom versions but nothing is displayed for the radio. I have tried all versions of the roms I have found. Always the same the radio fails, I had to remove the radio rom from the dir. to get the others to update, I then tried the radio alone several times, several different waysand it always fails with various errors.
Thanks for any help.
Husband with a ticked wife please help!
hey,
put ruu.dll, radio_.nbf and MaUpgradeUt_noID in a folder, and run the maupgradeut.exe file...this should upgrade the radio rom only, that is the gsm part.
let me knw whether it workd...
Did you follow the wiki radio upgrade only instructions ? if so what is the error?
I have tried both options listed above, the upgrade starts sits at 0% for several minutes then fails. I do not remember the exact error, this is what happens every time.
put ruu.dll, ruu.conf, radio_.nbf and MaUpgradeUt_noID in a folder, then put your device into bootloader mode by pressing power, reset, and record buttons at the same time, this combination of buttons will show "Serial" and bootloader version on your screen, then place it on the cradle, the "Serial" should change to "USB" then kill activesync (open task manager and kill rapimgr.exe and wcescomm.exe) then start MaUpgradeUt_noID.exe and all should be fine
if an error pops up please let us know
xplode said:
put ruu.dll, ruu.conf, radio_.nbf and MaUpgradeUt_noID in a folder, then put your device into bootloader mode by pressing power, reset, and record buttons at the same time, this combination of buttons will show "Serial" and bootloader version on your screen, then place it on the cradle, the "Serial" should change to "USB" then kill activesync (open task manager and kill rapimgr.exe and wcescomm.exe) then start MaUpgradeUt_noID.exe and all should be fine
if an error pops up please let us know
Click to expand...
Click to collapse
This not working. I Has the same problem. It seems like HW problem. Can't update radio. Then BT address 00:00:00... And now it freez at startup always.
IMHO. This is bad Flash which died.
I am waiting for answer about a month an still haven't one.
SoftService is right, if this type of upgrade fails it may be a hardware issue
I created a directory with the files listed and this is the error message I recieved:
error 114: radio rom update error
Any Ideas?
Thanks
do you have a sx66?
Anybody here has Full flash from PH20B device?
I think fullflash will help us from that problem. But it will the question how to unlock device after this procedure.
And anybody know how to repair IMEI?
Is there hardware specialists?
MDAIIIUser,
Mine is labeled PDA2K. It has quit syncing now. It just seems to be dying a slow agonizing death, and it's taking me with it! I need my electronic brain back.
I have tried all the suggested steps repeatedly. I am getting nowhere. It seems to want to work, it just keeps erroring out.
Thanks.
I had yesterday some problems regarding radio upgrades, which can not be solved by WIKI, so :
my radio rom was TYPEII and the files for upgrade are TYPEI => It can not upgrade
Tryed radio 1.13 TYPEI with TYPEI files and NOID => error
then tryed radio 1.13.1 TYPEII with its TYPEII files and just copied into that dyrectory the NOID APP and it worked (i have just learned that MAUpgradeUT_NOID.exe works with TYPEII RUU.dll and RUU.conf)
I was surprised because i use NOID for upgrading my roms and the files are TYPEI
i have weired problem,after upgrading to wm5 on my blueangel everything was ok,but i cant remember if i changed something or it happened by it self,the GSm service shows NO SERVICE,,,and the synchronization with the PC IS NOT WORKING ALSO,,,and whenever i try to hard reset it with the record and camera buttons ,when i press on the mail button nothing happens,,,as if i didnt press any thing......i tried to go back to 2003se,it worked fine,i used both radio versions 1.15 and 1.13 and the same on the wm5
i tried to reinstall the wm5 it reinstalled with the same problem and i noticed that my configurations r also the same!! and even the wall paper ,it seems that the settings sticks to the memory in some way ,,how can i delete it?how can i get rid of that?and install a new fresh copy of WM5 on it?
my device info now is 5.04.09
radio:1.13
and the surprise is no extRom version is Blank!
plz i need help with that....
what device do you have?
it's IMATE PDA2K
Have you tried to make soft reset? Is radio version showing up on reset?
The same situation. Everything was fine untill i upgraded to WM5 and then WM6. It seems that all files in ROM were saved cause on device start up all old applications are starting, such us XPshut and etc, but system gives can't find the file. the same applies to phoneservice.exe. the only thing which helps is to roll back to original 1.40 from imate.com. any solution?
if all apps from wm5 are there during startup, you didn't perform the reset + no/yes/yes + mail button routine, did you? the same thing when upgrading to wm5 from 2003se.
I don't seem to be able to hard reset my SPV M2000!!!
I press:
-Power+Reset
-Camera and Record to get the Boot Options
-Select NO, Yes, Yes
All of this works fine, but I can't go on from there - no button press will get it to finish the hard reset (and, YES! I DID try the 'Mail' button, nothing happens!)
Any I deas?
I've upgraded to WM6 (after first downgrading to WM2003 from WM5 - same problem occured when I tried this, too!) an I have a load of the programs I installed in WM5 trying to load at startup! I also want to get rid of the Extended ROM.
Any help you guys could give? I'd be eternally grateful!
Bird
Workaround
Sort of found a workaround(ish):
As I hadn't already changed the EXTROM, then all I had to do was to install the latest official ROM from the Orange UK site. That wiped the old crap I had on my BA, then resized the EXTROM and installed WM6.
Would still love to know if anyone knows/finds a proper fix! Just in case I want to change the ROM at a later date.
Bird
Full Solution
Not tried this - don't need to at the moment -
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
But it looks like the solution to the problem - found it by ... reading the Wiki !DOH!
Bird
I upgrade to TofClock WM6 from WM2003SE. I have a big problem, when i turn off the phone, after it i can turn on again, without restart. Common manager doesnt work and standard method like Settig=Would you like turn ON? not too. Please help me. And excuse my english, iam Czech
I guess its a problem with the ROM's Comm Manager, try WM6.1 lurking in the Himalaya WM6 Forums
In the WM6.1 its the same problem. Whats wrong? I like WM6/6.1 cause i have skype, qip, skyfire and many other software, wich doesnt work on WM2003SE. Please Help. Any patch or fix for i t?
Nothing wrong with comm manager in TofClock WM6.0 ROM. I used it quite some time. Try installing WM 6.0 or WM6.1 together with Radio 1.17. Do not forget the hard reset after the upgrade.
Yeah, thanks for your responds and tipes. Today i reflash to WM6.0, TofClock again. Probably i forgot to hard reset after upgrade. Now it work good. So again, thansk very much.
Previously i have 1.19 Radio, so downgrade to 1.17 with flash and really good. Please lock
but i have a small trouble, if i active a com manager, so i cant close him. He still runing as process and in task manager too. Exist a fix or patch for this ?
That happens in several ROM's, comm manager is expected to be always active. It does no harm, if it gets in the way you can kill the process. If you really want to replace comm manager, try this one. Before you install this cab, kill the comm manager if it is running, otherwise it will fail to install. It is a very stable comm manager, compatible with WM6.0 and WM6.1.
Warning. The attached comm manager cannot be uninstalled. If you want to remove it you must perform a hard reset.
thank you very much man, now i have a perfect WM6. Work very well...so thats all i think please lock thus thread
yeah, exist a next problem, with Office, if i open a document in word, and i close word, the process: pword still runing and i must terminate it manualy with process manager. Exist any fix or patch? I have tofclock 6 fresh rom and office in this is 6.1 version.