Problem with truning on/off radio part - MDA II, XDA II, 2060 Windows Mobile 6 Upgrading

I upgrade to TofClock WM6 from WM2003SE. I have a big problem, when i turn off the phone, after it i can turn on again, without restart. Common manager doesnt work and standard method like Settig=Would you like turn ON? not too. Please help me. And excuse my english, iam Czech

I guess its a problem with the ROM's Comm Manager, try WM6.1 lurking in the Himalaya WM6 Forums

In the WM6.1 its the same problem. Whats wrong? I like WM6/6.1 cause i have skype, qip, skyfire and many other software, wich doesnt work on WM2003SE. Please Help. Any patch or fix for i t?

Nothing wrong with comm manager in TofClock WM6.0 ROM. I used it quite some time. Try installing WM 6.0 or WM6.1 together with Radio 1.17. Do not forget the hard reset after the upgrade.

Yeah, thanks for your responds and tipes. Today i reflash to WM6.0, TofClock again. Probably i forgot to hard reset after upgrade. Now it work good. So again, thansk very much.

Previously i have 1.19 Radio, so downgrade to 1.17 with flash and really good. Please lock

but i have a small trouble, if i active a com manager, so i cant close him. He still runing as process and in task manager too. Exist a fix or patch for this ?

That happens in several ROM's, comm manager is expected to be always active. It does no harm, if it gets in the way you can kill the process. If you really want to replace comm manager, try this one. Before you install this cab, kill the comm manager if it is running, otherwise it will fail to install. It is a very stable comm manager, compatible with WM6.0 and WM6.1.
Warning. The attached comm manager cannot be uninstalled. If you want to remove it you must perform a hard reset.

thank you very much man, now i have a perfect WM6. Work very well...so thats all i think please lock thus thread

yeah, exist a next problem, with Office, if i open a document in word, and i close word, the process: pword still runing and i must terminate it manualy with process manager. Exist any fix or patch? I have tofclock 6 fresh rom and office in this is 6.1 version.

Related

sx66 bluetooth expired. missing rom... here is a sollution!

SX66 BLUETOOTH Expired
Hi. I can not use Bluetooth since I downgraded from wm2005 to WM2003. When I set up Bluetooth, it says”
BTTrayCE
Sorry! Bluetooth can no longer be used because the license is expired
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73COABB9A9074DD3B175
3515CD8
Please help. Thanks. I have tried completed install from original rom CE nad Radio. But the same problem. The extended rom is dead I can not upgrade it since it faila at 1%.
Please help Thanks.
Hi
Did you carefully follow WM2005 -> WM2003 process described in wiki ?
It's very important that you resize, reformat ExtROM and do some other stuff before flashing back to WM2003.
Good luck
i have the same problem.. since octobre without solution
Hi
I ask again.
Did you guys restore your ExtROM correctly ?
(using Repart_DOC.exe tool)
GO to wiki -> blueangel -> blueangel WM2005 page -> how to downgrade....
Good luck
hi robal
I tried but when i use Repart_DOC
I set size 16384 or other sizes but if I click format now, the error message pops up"
Create handle failed.
Please help. Thanks!
Hi
Maybe You forgot to do as described in point "3" of downgrade process :
Prep your WM5 device by formating Storage and Hive.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse
This should've been done when you had WM2005.
I think it's important to do it, before trying to run Repart_DOC (on WM2003).
Any idea ?
If you've forgotten to do it. You probably will have to intall WM2005 again, do it, intall WM2003 and Repart_DOC it. HUh
have fun
DEAR robal,
Thanks for your information. In fact I did everything like you said before. but nothing help.
I know that I have to creat an extended_Rom in order to get it work. (this is not a big deal since we can install manually.
The most imfortant thing is the bluetooth error. Please help me find a sollutin for it. Thanks!
Hi
So you say, you have WM2003 installed with Extrom CABs from some official ROM ? OK
I'm not familiar with this BT failure. Please tell me exactly what ROM are you using ( CE , Radio, ExtROM )
And what version of BT stack you have.
This error is caused by a portion of the Bluetooth memory being overwritten by something else. The people who are trying to help you are right...you need to reflash the device because something didn't work correctly last time.
I had a tool that restored BT MAC-address, but I cannot find it on HDD.
It was sent by imate tech support as a fix for the "bt license has expired" error, so you may try to contact them, or search this forum.
please mamaich if you can find it this will be very helpful
Dear mamaich,
Thanks for your great imformation. I love to get it as soon as you find it. Again, thanks for your pricious time to repond.
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
new problem come out after previous one
hi, I have another problem so.. i need your help.
before, My sx66 problem with bluetooth and the Extended_ROM did not exist.
Now, after many tried to install rom from Tmobile, O2. sx66 over and over again, the extended_ROM is now okay to install but sadly the Storage doen't exist any more. Also some contact, task .. pop up after full installation. Finally,after extended_ROM Complete installed, window
Connection Flash Mangaer
pop ups" Saved data is corrupted.
System will erase all data to fix
this error
Yes No
but It does fix anything after I click yes button.
Please help to recover my storage. If there any software that can partition rom for ppc. please share.
p.s. the bluetooth now is freezing.
what u hv to do is use the Ext ROM Unlocker and use Repart_Doc...Set the size of yr Ext ROM...say 15 MB or so and then do the Repartitioning...now flash yr device...u will get yr Ext Rom Back with no such errors as reported by you
problem solved.
Dear hdubli,
Thanks for your help. Everything works properly now. Now my sx66 works at factory shipped. I am very happy.
Specailly thank to Hdubi for providing an exellent solution.
hdubli said:
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
Click to expand...
Click to collapse
Hi hdubli, a question, what is the ROM 1.4 of the blueangel?

Problem after upgrade to WM5 AKU3.5.2 R5 Rom Kitchen v2

Problem after upgrade to WM5 AKU3.5.2 R5 Rom Kitchen v2 (My XDA IIs)
The problem is wi-fi and bluetooth connection.. some time i can open wi-fi and some time can not (bluetooth also)
you cannot use both bt and wifi at same time with xplode release.
from your post, i guess you are trying to use one with the other already on.
Yes you can use them both at the same time, i use other drivers for my rom than helmi's
xplode said:
Yes you can use them both at the same time, i use other drivers for my rom than helmi's
Click to expand...
Click to collapse
I can vow to that too.
No problem to use both at the same time.
Try doing a hard reset and flash the rom again. Test BT and Wifi when you have not installed any other applications to your BA. It should work. If not, I suggest that you do another hard reset, this time, flash Xplode's rom and after that, flash the radio rom. I did this a few days back as I suspected my BA is not functioning well even after fresh rom upgrade.
General advice, disable any of the SIP you don't need, e.g. transcriber (at this moment, I have only the keyboard - I used to add in Tengo Thumb), have as little Today plug-in as possible. For now, I have Phone Dashboard, iLauncher, PocketBreeze and SK Today Commander and both BT and Wifi can be fired up one after the other, no problem. Note that you must close any other application you have in the background, e.g. Calendar, Messenging, Contacts etc. Follow this and you should be able to enjoy the hard work Xplode had put it.
Cheers!
i use helmi release and i can use both at same time.

BETA Touch-IT wwe P4350 (Build 18125.0.4.2)

Ok guys, I have been neglecting p4350 too long now, so here is a brand new build, ported from latest release of kaiser, and this the wing guys dont have
It got 4mb pagepool
all usual apps I put in, ill make a list tomorrow...
but whats new in it is
new comm manager
romsettings
htc touch dual album
htc touch dual random access (new contacts manager)
htc touch dual keyboard (cool new way of fast typing)
htc home, customize it
newer touchsettings with custom weather setup (online)
htc networkplugin
onenote mobile 2007 (and ofcourse office 2007)
sms backup
Ill put up some screens tomorrow, its quite late here now, so im off to bed.
Ill try update this post alot better tomorrow..
But, to wing users:
Please dont report "bugs" here that you experience with your wing with this rom, because its not ment for your device.
The bugs you have might not be present in p4350.
Download:
Rapidshare
If someone could do me a favor and upload this to some mirrors, it would be great, cause not everyone can access rapid, and im to tired, im off to bed
cheers
I thought u forgot about Us, anyway I'll give it a try when i get home. can't wait.
awesome. can't wait to try it.
I have a few queries...
I flashed my dopod c800 with the touch it final , now activesync reads my phone as a HTC P4350. Can i flash it again with this new touch it?
Installed without a hitch.
How do I access htc touch dual random access (new contacts manager)?
It doesn't show up in Rom Settings.
How'd u use rapidshare?
Maybe u could use megaupload?
How do u use rapidshare?
I wanna flash but i cant get the file.....
Installed with no problem, apps and ppc running fast no overclock, camera work, office works, commgr works well, touch flo work, htc album is GREAT, window player works, my email works, i connected to my work outlook inbox. randon access dont work changing contacts in romsetting does nothing right now bout to install pocketcm, I don't see onenote present, the touch keyboard works sometime, keyboard symbol r messup i push a and get ?. if i come acroos any problems i'll post them but for now this work great.
before I got to work.
I must state again, incase someone with a wing accidently stumbles upon reading........
I do not understand why wing ppl keeps pushing that there is keyboard bugs in the p4350.
THERE IS NO KEYBOARD BUG
please, stop reporting it, the wing is built diffrent
IF YOU USE THIS ON WING YOU WILL GET A MESSED-UP KEYBOARD
have a nice day
cheers
Craps
How long does the flashing take? Mines been running for almost an hour..
Pulled the plug while flashing..
Then it bricked.... But, it was unbricked in the next 5 mins. Have to try flashing all over again.
follow instructions in the How To Upgrade.txt provided in the rom folder.
How to install your new OS for wing, follow this and you cant be wrong: (But im not sure since this is for Wing )
1. Make a full backup, or only the data necessary to you on SD a card or PC via Windows Mobile Device Center, or other
backup programs you might have.
1.b. Either hard reset your device, or flash the official RUU for your device, so that you have a clean base to flash on to.
2. Connect to ActiveSync\Windows Mobile Device Center, and run the connect without syncing the device.
3. Put your device in flightmode,this is done in CommManager. (radio off) If someone call, or sms you during flash, you will have errors.
4. Copy ASerg_Policies.CAB to your device and install it, THEN SOFT RESET, I say again SOFT RESET.
5. Start !UPGRADE_ROM.bat and wait, there will show nothing on your phone display, so dont worry, its normal. AND do not
use your device in any way, to be sure that no errors will happen, wait for the command promt tell you that you have
to hard reset. (If you dont know to soft and/or hard reset, dont bother to run the upgrade untill you have learned how to use your phone.
6. you should now have your new updatet rom.
-If you run into problems, and device is not booting, run the official RUU FROM HTC to restore your phone.
-If You have error during flash, this often happens for unknown reason. you can wait out and proceed, sometimes the update works anyway.
-If it doesnt work, reflash the RUU, and try again.
Beta not usable with dopod c800
Flashed twice and bricked it twice....
At last!!!
I have been connecting here everyday in order to find this post and finally here it is!
downloaded and ready to install.
hi, thank's for your work... already using on mine herald.
i just have a noob question! how the heck do i get the cube (if theres one )?
I must say i like this rom. Fast, and seems stable in the first 15 minutes
I installed it on my Terra this morning, worked like a charm.
I haven't found any bug so far, but it seems you forgot to include HTC audio manager.
thanks..
..for your great work.. tonight i install it!!!
edzilla said:
I installed it on my Terra this morning, worked like a charm.
I haven't found any bug so far, but it seems you forgot to include HTC audio manager.
Click to expand...
Click to collapse
lol yeah..ill add it in final
madds said:
hi, thank's for your work... already using on mine herald.
i just have a noob question! how the heck do i get the cube (if theres one )?
I must say i like this rom. Fast, and seems stable in the first 15 minutes
Click to expand...
Click to collapse
use tf-settings in programs/touchflo choose there how to activate, then soft reset
punkcell said:
follow instructions in the How To Upgrade.txt provided in the rom folder.
How to install your new OS for wing, follow this and you cant be wrong: (But im not sure since this is for Wing )
1. Make a full backup, or only the data necessary to you on SD a card or PC via Windows Mobile Device Center, or other
backup programs you might have.
1.b. Either hard reset your device, or flash the official RUU for your device, so that you have a clean base to flash on to.
2. Connect to ActiveSync\Windows Mobile Device Center, and run the connect without syncing the device.
3. Put your device in flightmode,this is done in CommManager. (radio off) If someone call, or sms you during flash, you will have errors.
4. Copy ASerg_Policies.CAB to your device and install it, THEN SOFT RESET, I say again SOFT RESET.
5. Start !UPGRADE_ROM.bat and wait, there will show nothing on your phone display, so dont worry, its normal. AND do not
use your device in any way, to be sure that no errors will happen, wait for the command promt tell you that you have
to hard reset. (If you dont know to soft and/or hard reset, dont bother to run the upgrade untill you have learned how to use your phone.
6. you should now have your new updatet rom.
-If you run into problems, and device is not booting, run the official RUU FROM HTC to restore your phone.
-If You have error during flash, this often happens for unknown reason. you can wait out and proceed, sometimes the update works anyway.
-If it doesnt work, reflash the RUU, and try again.
Click to expand...
Click to collapse
lol, that is the read me for wing, sorry about that
This rom is not built for wing, even though it might work, it might not work for wing

Bluetooth broken after installing WM6

Hi all,
Finally WM6. Great!
But after installing the Tofclock ROM, my device became unstable like many others have reported. So when C_Shekar published his ROM, I installed it.
No problems on stability anymore, but after this upgrade I can no longer use my Bluetooth functions properly.
I can pair with my GPS, but as soon as I try running GPS software the device becomes slow and will reset after some time. After that, only turning bluetooth on will cause a reset, no matter if I'm paired or even using it at all.
So I re-installed the Tofclock ROM, because there I had at least GPS. But now it was no longer working there either.
Today I even downgraded to AKU3.5 and even a 'pre-historic' version of 2003 (1.70) but it does not work anymore for any of the ROMs.
Can someone please help me on this one. I understood from other posts that I'm not the only one, so it's not just my Hima. But I really would like to have my GPS back.
rvdrijt said:
Today I even downgraded to AKU3.5 and even a 'pre-historic' version of 2003 (1.70) but it does not work anymore for any of the ROMs.
Click to expand...
Click to collapse
Which indicates that it is an hardware failure and not a software problem.
Flashing the device with another ROM version does not destroy any hardware at all.
Sascha
Thanks for your response.
But if it is just a hardware problem that can't be caused by an upgrade, how come I'm not the only person experiencing the same issue that started at the same time?
If it was just me it simply could have been bad luck.......
I'm just still not sure of my conclusions, but everything points at the upgrade to WM6. Let this be a warning!
I have not seen any similar reports in any threads before. Can you link us to specific messages?
It is very well possible that it's a software problem. After all you're probably using the same GPS/BT software in all these ROM up/downgrades you tried?
My GPS software is entirely on my SD card, after flashing a new ROM and formatting my RAMdisk it instantly knows my last position. Your software has IMHO probably messed up some file on your SD card that's related to your BT/GPS settings or so. I advice you to format your SD card, reinstall the clean GPS software on it, see if it still misbehaves.
http://forum.xda-developers.com/showthread.php?t=332945&page=17
You also entered a reply back then ;-)
I will re-install my GPS software. However, I've tried other programs as well with the same result (i.e. Speed Sentry). But that might be because I tried it after a first reset. And the reboot also appears when I have a different SD card in the slot.
Right now I'm waiting for my backup battery to be empty. Who knows, a 'real' hard reset might help.
@Maggy
Seems you were right! Removing the battery didn't work so I checked my GPS program's files. I found a recently changed file for the config and after I removed it it seems to work again!
Still a big puzzle why it started when I changed to WM6. But I'm updating my ROM at this moment so I hope to be able to answer the question if it is WM6 related soon.
Thanks for the help!
You're welcome.
And yes, you're right that I replied to that post but my memory is in my PC and XDA, not in my head
It's possible that there's a tiny difference between the way the config file is written in WM6 or WM2003, so switching from one OS to the other messes the file up.
I have the good habit of formatting the SD card when I flash a ROM.
Glad this item looks solved.
Even better: it doesn't look solved, but it is solved.
I went home using my GPS! YESSSS!
Knowing this it's time I start cooking my own ROM......... thanks to all the great people at this forum.
Hello All
After having read the message, I just try TOMTOM 6 with RBT2001 and have the same problem, tomtom is very slow, and after some time soft reset.
And I have this problem with the new ROM: 7.0c.40CS (WM6 AKU 7.0)
And I had no problems with the ROM: 7.0b.40CS (WM6 AKU 7.0)
If this can help you understand the problems ?
I guess you should delete \Storage Card\ttnavigator.bif, then reinstall Tomtom
It's even much simpler: simply delete the \TomTom Navigator 6\navigator.cfg file. You'll have to redo some configuration, but it works great again.
rvdrijt said:
It's even much simpler: simply delete the \TomTom Navigator 6\navigator.cfg file. You'll have to redo some configuration, but it works great again.
Click to expand...
Click to collapse
Good.
Tomtom work again.
Thank you

Registry not saving

Hello all,
I've been encountering this problem for ages and still haven't find a solution to it yet. Basically, I regedit so that the phone doesn't show contacts from SIM. After i soft-reset, the registry also resets and it still shows the SIM contacts. I've tried it through PHM RegEdit and Advanced Config 3.3 but no luck. Can anyone help me please
simonwong1989 said:
Hello all,
I've been encountering this problem for ages and still haven't find a solution to it yet. Basically, I regedit so that the phone doesn't show contacts from SIM. After i soft-reset, the registry also resets and it still shows the SIM contacts. I've tried it through PHM RegEdit and Advanced Config 3.3 but no luck. Can anyone help me please
Click to expand...
Click to collapse
Are you using a custom ROM or a stock ROM?
I'm using the uDK wm 6.5 21500 ROM
but this has occured with every ROM i've used so far, including Dutty V4 ROM
simonwong1989 said:
but this has occured with every ROM i've used so far, including Dutty V4 ROM
Click to expand...
Click to collapse
That's realled fd up! Have you tried cooking one of your own ROMs? Also, (this may sound bizarre) do you download the RUUs on the PC you flash it on? Do you flash with a VM? I used to download all of my SYS files on a Mac and it turned out when I copyed them to a Windows PC to cook and flash, ROMs came out screwy where no CAB files would install.
There are a ton of factors in this, but the best remedy is to try and download a stock ROM and download and flash that on device. That should clear up any corruption errors.
Just tired it no luck... =(. I use CustomRUU for my flashes. I have he unsigned HardSPL (can't remember which one) with the latest Blackstone radio and 2.04 ROM (uDK ROM) It has been happening since I first purchased it... its so frustrating. Only solution for me is to make a reg that loads at start up but i always need to press a dialog box to apply to regedit. Is there a way to auto reg on boot up of phone?
simonwong1989 said:
Just tired it no luck... =(. I use CustomRUU for my flashes. I have he unsigned HardSPL (can't remember which one) with the latest Blackstone radio and 2.04 ROM (uDK ROM) It has been happening since I first purchased it... its so frustrating. Only solution for me is to make a reg that loads at start up but i always need to press a dialog box to apply to regedit. Is there a way to auto reg on boot up of phone?
Click to expand...
Click to collapse
Did you try flashing from the SD?
Yep. tried it through the Bootloader and through CustomRUU. No lluck. Its quite frustrating beause it just keeps resetting. Other registries say though ie auto lock device in 5 seconds. That reg is perfect but its just the SIM wouldn't work.
simonwong1989 said:
Yep. tried it through the Bootloader and through CustomRUU. No lluck. Its quite frustrating beause it just keeps resetting. Other registries say though ie auto lock device in 5 seconds. That reg is perfect but its just the SIM wouldn't work.
Click to expand...
Click to collapse
Did you lock it again? You should uninstall HardSPL and put the SoftSPL back on. I do not know how to do this because I am on CDMA but stf will always be of help

Categories

Resources