Problem after upgrade to WM5 AKU3.5.2 R5 Rom Kitchen v2 (My XDA IIs)
The problem is wi-fi and bluetooth connection.. some time i can open wi-fi and some time can not (bluetooth also)
you cannot use both bt and wifi at same time with xplode release.
from your post, i guess you are trying to use one with the other already on.
Yes you can use them both at the same time, i use other drivers for my rom than helmi's
xplode said:
Yes you can use them both at the same time, i use other drivers for my rom than helmi's
Click to expand...
Click to collapse
I can vow to that too.
No problem to use both at the same time.
Try doing a hard reset and flash the rom again. Test BT and Wifi when you have not installed any other applications to your BA. It should work. If not, I suggest that you do another hard reset, this time, flash Xplode's rom and after that, flash the radio rom. I did this a few days back as I suspected my BA is not functioning well even after fresh rom upgrade.
General advice, disable any of the SIP you don't need, e.g. transcriber (at this moment, I have only the keyboard - I used to add in Tengo Thumb), have as little Today plug-in as possible. For now, I have Phone Dashboard, iLauncher, PocketBreeze and SK Today Commander and both BT and Wifi can be fired up one after the other, no problem. Note that you must close any other application you have in the background, e.g. Calendar, Messenging, Contacts etc. Follow this and you should be able to enjoy the hard work Xplode had put it.
Cheers!
i use helmi release and i can use both at same time.
Related
I just bought the IMATE PDA2K and i am still exploring the device. The first problem i found is that i have a NAVMAN navigation software including the reciever model GPS 4410. I cant connect via bluetooth in the running software and have a fix on the satellite. On the bluetooth manage i can connect and the system finds it. Please can someone help me in this. I am running the second edition of microsoft windows.
I don't know if it might fix your problem but you should look at the imate club site in order to install the new ROM. In the ROM there are some fixs concerning the bluetooth (waiting time and more devices found), battery and other issue.
There have been a lot of negative feedback (check the imate forum to know more) regarding this new rom.
There should be also a One-off patch to fix just the Bluetooth problem (it shoud be available also on this site).
You should just "cook" your own Rom. That way, you can build your own rom just to suit your needs....not everyone's needs in general.
I too have a PDA2K but am running the 1.3.51 WWE w/WMP10, radio version 1.10, B/T build version 3900, w/Siemens SX 66 extended rom from this site. You can use an extended rom of your choice. I use the Cingular ext rom, as my service is with them.
That would help solve alot of your gps and b/t issues.
Do a bit of reading in the "extended rom kitchen" regarding this. There is a wealth of info to be found in this site.
Later...... 8) 8) 8)
p1227 said:
I just bought the IMATE PDA2K and i am still exploring the device. The first problem i found is that i have a NAVMAN navigation software including the reciever model GPS 4410. I cant connect via bluetooth in the running software and have a fix on the satellite. On the bluetooth manage i can connect and the system finds it. Please can someone help me in this. I am running the second edition of microsoft windows.
Click to expand...
Click to collapse
hdbueller,
I’ve got a PDA2k and am on Cingular. I’ve been pulling my hair out with this thing trying to figure out how to get a better ROM installed. When I try to install the latest Siemens ROM (with the hack to get past the Country Code Error) I get stopped up with an ERROR 100: DEVICE ID ERROR.
The ROM you describe sounds perfect. Any chance I can score a copy?
The rom has a header with the device ID in it, the seimens is PH20B1 if you downloaded the orginal rom, your device is a PH20B, thus the error.
Back on the ftp site there is a hacked version, lot of people played with it but then went back.
Next there is the thred with media player 10 in it, think this was another cooked version dont remeber what the base was for that rom, think it was the imate EDVO. Lot of reading, get the "final" version, also on ftp.
Thought I'd clear up some confusion on the various ROMs and where they are at now. Each of these ROMs is customized for Cingular - they have the Cingular splash screen, and GPRS and MMS account settings.
The orignal ROM that shipped on the 8125:
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_1.8.11.1.WWE.ship.exe
Based on QTek ROM that has A2DP (not recommended since there is now a 2.17 ROM with A2DP):
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_2080701_101_11310_WWE.exe
Based on QTek test ROM above, but with additional ringers, themes, overclocking app:
ftp://xda:[email protected]_RUU_2080701_101_11310_WWE-RINGRS-OCLOCK.exe
Based on Imate 2.17 ROM with AKU2 and MSFP (this is the "cleanest" customized ROM):
ftp://xda:[email protected]/Wizard/Roms/Cingular/Cingular_RUU_WIZARD_217_AKU2_WWE.exe
Based on 2.17 Imate ROM, but with additional ringers, themes, and overclocking app:
ftp://xda:[email protected]_RUU_WIZARD_217_AKU2_WWE-RINGRS-OCLOCK.exe
Based on 2.17 Imate ROM, but with additional ringers, themes, overclocking app, and Compact Framework 2 integrated into ROM:
ftp://xda:[email protected]_RUU_WIZARD_217_AKU2_WWE_RNGRS_OCLOCK_CF2.exe
Based on 2.17 Imate ROM, but with additional ringers, themes, overclocking app, Compact Framework 2, and A2DP/AVRCP:
ftp://xda:[email protected]_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP.exe
To flash to a new ROM, follow the directions listed in numerous posts. In a nutshell you do this:
Plug in, establish Activestink (no need to create a full partnership)
Use aWizard to CID unlock. Phone will restart when done.
Re-establish Activestink
Run the ROM upgrader of choice
I'd rather this post not turn into troubleshooting topic for specific versions, so try to keep those sorts of topics in the announcement threads for each ROM, or start a new topic. (after doing a search of the forums to see if your question/issue has been addressed elsewhere)
Thankya and stuff
You are the man, dude! Thanks for sharing your talents.
I hate post bumpers, but I'm still getting PMs and seeing folks looking for proper links to the ROMs, so, BUMP BIATCH.
Yeah, this should stay near the top, I'm running one of your roms and it's great, thanks!
Thank you VERY much for all your time & hard work. It is much appreciated.
awesome work bud! Thanks so much for this stuff..
this thread should be stickied!!
Your the man!!!!
Muchas gracias summiter for your wisdom and help.
Summiter:
You do great work. I'm a real Noobie. I'm now using the QTEK WWE TEST ROM 2.8 . . .something. I have a cingular 8125 phone but using T-Mobile USA service. I'm flashed the Test ROM to get the A2DP and AVRCP profiles. It works OK but it hangs especially when going from switching from GPRS to Wifi and back (I have to soft reset the device.)
Which of your ROMs would work the best for me? By looking at the list the 2.17 I-mate with A2DP and AVRCP seem to look the best.
Thanks for all the good work.
RE: upgrade to the May 2nd "repaired" version
Thanx summitter. I used an older file (May 2, 2006 download) ----
Cingular_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP-fixed.exe
I assume this is the same as the latest one in the directory ---
ftp://ftp.xda-developers.com/Wizard/Roms/Cingular/
Mine said 54m on the FTP site and wound up about 56,301k on my PC.
Assuming i have the same one, i should already have Compact Net Framework 2. So, the question is: did i screw this up when -----
1. downloaded the .msi file for WiFiFoFum. About 7mb file with NET Compact Framework 2 (via USB Active Sync connection).
2. Tried to install the app. First it loaded WiFiFoFum successfully. Stopped about 1/3 during NET Compact Framework 2 install.
3. After numerous tries, i removed the both. Even deleted the new additional directory of NET Compact Framework 2.
4. The loaded the .CAB version of WiFiFoFum (which was only 300k and did not have NET Compact Framework). Seems to be working fine.
Could i have removed NET Compact Framework from my system? Is there anyway to tell if it still is loaded?
Everything seems to be working. Wifi, Bluetooth, GPRS, and even a little program that pushes all audio to my BT headset.
Thoughts anyone?
MSFP Problem...
Has anyone been able to get the ota push side of MSFP to work w/ Cingular in the US and the MSFP version of this rom upgrade?
Thanks!
Once again thanks Summiter. Can't wait to see what you have cookin' up next. I now have two Bluetooth Stereo Headsets and am waiting on the Nextlink Spider to make it my third. All thanks to you. Moto HT820 and Jabra BT620.
Zoki hack needed with this ROM?
Based on 2.17 iMate ROM, but with additional ringers, themes, overclocking app, Compact Framework 2, and A2DP/AVRCP:
ftp://xda:[email protected]_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP.exe
Hi Summiter/ any one who have installed this Rom,
I have installed the last ROM in this thread.
Do we need Tornado hack cab files done by Zoki in other threads in order to get the bluetooth stereo with this ROM. or we are good to go with this ROM. Because in this version I could not see any sbc or b2a2dp or avrcp_ files as given by the zoki version.
Thanks
Noob Question here
I unlocked my phone and got ready to install the 2.17. Then I saw the warning that it would erase all the info on the device. I'm sure once I do a quick activestink after the boot, I'll get all my contacts back. But will I have to reset all of my other settings (email, gprs, etc.). I just got the phone last week and have already spent literally hours on the phone with Cingular's tech support sorting out all sorts of issues (like not being able to connect to gprs and voice mail not working, which was their problem I think). Thanks in advance.
10 print "bump"
20 goto 10
Ok,
I unlocked the phone and cid using lokwiz and then flashed the rom with the ftp://xda:[email protected]_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP.exe version. Not sure if it worked though. The battery icon disappeared, but I don't see the overclocking feature or any additional ringers or themes. It shows the ROM version as 1.8.11.1 WWE and the ROM Date at 11/24/05. Radio version is 2.07.10. Did it update? I get the sneaky suspicion that it didn't.
I did see it load the A2DP cab after the reboot, but don't have the headset to test it yet. How do I tell if it worked?
Thanks in advance.
Make sure you do the super unlock, not just the regular one. Otherwise it only flashes halfway
Thanks. I'm pretty sure that's the one I did. I'll try again, though I'll probably wait until Summiter gets the next ROM out later this week. I flashed it twice today and am ready to take a break from it.
BTW, thanks for all the hard work Summiter.
Where are the cab files located after I flash the unit?
Where are the cab files located after I flash the unit, so I can install the extra features included with it ?
i will have to say thank you to summiter for the rom we have used it at my work and we are very happy with it.
Is there a verison of the 2.25 rom for cingular that works with the bt sterio headsets. Or will the one from cingular work fine. Right now a am running 2.17 which works well, but I do drop more calls now, not much more but some.
colorall said:
Is there a verison of the 2.25 rom for cingular that works with the bt sterio headsets. Or will the one from cingular work fine. Right now a am running 2.17 which works well, but I do drop more calls now, not much more but some.
Click to expand...
Click to collapse
I see you've fixed that caps LOCK PROblem. ;-)
You can have A2DP on any ROM you wish, if you search for, and install the cab file which is floating around here.
Summiter's AKU 2.3 ROM will work with native support for A2DP and it already has a number of Cingular customizations installed. If you just want "out of the box support" that works well.
If you prefer an older version of the ROM (some claim they are more stable) summiter has also integrated A2DP support in some of his AKU 2.x ROMs.
I'd suggest reading the threads on the custom Cingualr ROMs for more info.
I hope someone has tried this before me... if not I will try to update you on later posts.
Previouse equipment:
Cingular 8125
*Rom 1.8.11.1 (stock rom and radio rom dated 11/24/05)
RUU_Wizard_1081101_10811103_10910_Cingular_WWE_Ship.exe
*SPB Pocket Plus 3
*SPB Weather
*Zombienexus.net zphone skin
*CommonTime mNotes (pps 2005) sync to Lotus Notes Mail server
*Aspecto Software WiFiFoFum
*Microsoft .NET CF 2.0
*TCPMP (Core Pocket Media Player)
*Total Commander Editor
*Zoki A2DP
Upgraded to:
Cingular 8125
*Rom 2.25.11.1 (latest released on 6/19/06 with rom dated 5/11/06)
RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe
*A2DP hack.cab
*SPB Pocket Plus 3
*SPB Weather
*Zombienexus.net zphone skin
*CommonTime mNotes (pps 2005) sync to Lotus Notes Mail server
*Aspecto Software WiFiFoFum
*Microsoft .NET CF 2.0
*TCPMP (Core Pocket Media Player)
*Total Commander Editor
*Zoki A2DP
*Cingular Get Xpress Mail (stocked with new Rom)
Downloaded Tools:
*aWizard-V1_3beta2 (xda ftp site)
*RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe (HTC)
*!A2DP hack.cab (included in the post)
Note: Just to let you all know that all my hardware and software was working prior to me updating to the latest code.
Procedure to Upgrade:
Backup:
Download and extract the aWizard-V1_3beta2 utility and execute.
Select the "e" option to Enable RAPI (Run this after each hard reset)
Select the "b" option to backup Radio, OS and Extended ROM
Syncronize the device to you PC before you start the upgrade!!!!
Upgrade:
Run the RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe and follow the insturctions on the screen.
Yes... Your data will be gone.... This is why you Sync'ed before you started.
Install Software (usb):
First start by installing the A2DP cab file by copying it to your device and execute it from the device. I checked before and after and where as i did not have the A2DP option before I did notice it after this was installed. (Sorry, since I have no A2DP head sets I can't test, but will try in the weekend).
I installed all the softwar again and it all works fine so far, we'll see tomorow when it get's put to some use. You will have the choice of either re-installing all of the programs like you did the first time you got the software or you could open the MS ActiveSync 4.1 and select ONE BY ONE and restore them to your device. I have read of problems from some people who selected all of the programs at once and did the re-install... don't do it.
Configure and Test:
I tested the WiFi and I actualy have a better reception using a less stronger signall from the antena options ( I hope this means more play time!). I was actualy very easy this time than on the previouse stock Rom. Again, do not change any settings on you WiFi router, you will need the login information to the router to establish the connection again, I forgot mine and had to look in the routers security settings to get that back again (one minuite tops!).
I tested BT and that works like a charm too! I re-syncronized to my laptop without a problem. Again don't make any changes to your previously working BT enabled PC. If it worked before IT should work now. You will need to establish the BT security connection to you BT enabled PC. Once you accept the connection on you PC, go to your device (8125) and open the ActiveSync manager and from the bottom right-hand menu select the "Connect via Bluetooth". I also connected to my BT headset (Logitek) and works like a charm too! That's IT!
Right now I have WiFi, BT, and TCPMP and the audio and vidio is not skipping nor is the video choppy! I hope that the A2DP works!
And for those of you who did not notice I did this all without ulocking the 8125. So it's still in warranty! Well, let me dream that it is for a while before you tell me it isn't.
Thank you all, good night and good luck!
Of course, since you didn't CID unlock before you upgraded you're now stuck with a CID lock (unless you want to pay cash money for the unlock service).
It's best to CID unlock regardless while still on a 1.xx ROM so that if you do ever decide to upgrade to a custom ROM you can. If you don't CID unlock before upgrading to the official 2.25 ROM you remove the possibility of later getting a CID unlock for free.
gamescan said:
Of course, since you didn't CID unlock before you upgraded you're now stuck with a CID lock (unless you want to pay cash money for the unlock service).
It's best to CID unlock regardless while still on a 1.xx ROM so that if you do ever decide to upgrade to a custom ROM you can. If you don't CID unlock before upgrading to the official 2.25 ROM you remove the possibility of later getting a CID unlock for free.
Click to expand...
Click to collapse
There will be a way..... Maybe not now, but being able to unlock the CID will come with time. In any case, can I not go back to 1.8.xx rom, unlock it, then skip back to any rom I want? I've read of several people that have gone back to 1.8.xx, is this not true?
I wrote this because there are a number of us who do not want to run the custom roms, I am not a Cingular employ or know of one that would enable me to test roms and exchange my phone for a new one if I did toast mine. So for those of us that want to stay in the box, there's this.
http://www.htcamerica.net/support/software_downloads_8125.ht
Link to the new Cingular rom.
Si7lver said:
I hope someone has tried this before me... if not I will try to update you on later posts.
Previouse equipment:
Cingular 8125
*Rom 1.8.11.1 (stock rom and radio rom dated 11/24/05)
RUU_Wizard_1081101_10811103_10910_Cingular_WWE_Ship.exe
*SPB Pocket Plus 3
*SPB Weather
*Zombienexus.net zphone skin
*CommonTime mNotes (pps 2005) sync to Lotus Notes Mail server
*Aspecto Software WiFiFoFum
*Microsoft .NET CF 2.0
*TCPMP (Core Pocket Media Player)
*Total Commander Editor
*Zoki A2DP
Upgraded to:
Cingular 8125
*Rom 2.25.11.1 (latest released on 6/19/06 with rom dated 5/11/06)
RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe
*A2DP hack.cab
*SPB Pocket Plus 3
*SPB Weather
*Zombienexus.net zphone skin
*CommonTime mNotes (pps 2005) sync to Lotus Notes Mail server
*Aspecto Software WiFiFoFum
*Microsoft .NET CF 2.0
*TCPMP (Core Pocket Media Player)
*Total Commander Editor
*Zoki A2DP
*Cingular Get Xpress Mail (stocked with new Rom)
Downloaded Tools:
*aWizard-V1_3beta2 (xda ftp site)
*RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe (HTC)
*!A2DP hack.cab (included in the post)
Note: Just to let you all know that all my hardware and software was working prior to me updating to the latest code.
Procedure to Upgrade:
Backup:
Download and extract the aWizard-V1_3beta2 utility and execute.
Select the "e" option to Enable RAPI (Run this after each hard reset)
Select the "b" option to backup Radio, OS and Extended ROM
Syncronize the device to you PC before you start the upgrade!!!!
Upgrade:
Run the RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe and follow the insturctions on the screen.
Yes... Your data will be gone.... This is why you Sync'ed before you started.
Install Software (usb):
First start by installing the A2DP cab file by copying it to your device and execute it from the device. I checked before and after and where as i did not have the A2DP option before I did notice it after this was installed. (Sorry, since I have no A2DP head sets I can't test, but will try in the weekend).
I installed all the softwar again and it all works fine so far, we'll see tomorow when it get's put to some use. You will have the choice of either re-installing all of the programs like you did the first time you got the software or you could open the MS ActiveSync 4.1 and select ONE BY ONE and restore them to your device. I have read of problems from some people who selected all of the programs at once and did the re-install... don't do it.
Configure and Test:
I tested the WiFi and I actualy have a better reception using a less stronger signall from the antena options ( I hope this means more play time!). I was actualy very easy this time than on the previouse stock Rom. Again, do not change any settings on you WiFi router, you will need the login information to the router to establish the connection again, I forgot mine and had to look in the routers security settings to get that back again (one minuite tops!).
I tested BT and that works like a charm too! I re-syncronized to my laptop without a problem. Again don't make any changes to your previously working BT enabled PC. If it worked before IT should work now. You will need to establish the BT security connection to you BT enabled PC. Once you accept the connection on you PC, go to your device (8125) and open the ActiveSync manager and from the bottom right-hand menu select the "Connect via Bluetooth". I also connected to my BT headset (Logitek) and works like a charm too! That's IT!
Right now I have WiFi, BT, and TCPMP and the audio and vidio is not skipping nor is the video choppy! I hope that the A2DP works!
And for those of you who did not notice I did this all without ulocking the 8125. So it's still in warranty! Well, let me dream that it is for a while before you tell me it isn't.
Thank you all, good night and good luck!
Click to expand...
Click to collapse
HI, Please share link to download Rom
Hi all,
Finally WM6. Great!
But after installing the Tofclock ROM, my device became unstable like many others have reported. So when C_Shekar published his ROM, I installed it.
No problems on stability anymore, but after this upgrade I can no longer use my Bluetooth functions properly.
I can pair with my GPS, but as soon as I try running GPS software the device becomes slow and will reset after some time. After that, only turning bluetooth on will cause a reset, no matter if I'm paired or even using it at all.
So I re-installed the Tofclock ROM, because there I had at least GPS. But now it was no longer working there either.
Today I even downgraded to AKU3.5 and even a 'pre-historic' version of 2003 (1.70) but it does not work anymore for any of the ROMs.
Can someone please help me on this one. I understood from other posts that I'm not the only one, so it's not just my Hima. But I really would like to have my GPS back.
rvdrijt said:
Today I even downgraded to AKU3.5 and even a 'pre-historic' version of 2003 (1.70) but it does not work anymore for any of the ROMs.
Click to expand...
Click to collapse
Which indicates that it is an hardware failure and not a software problem.
Flashing the device with another ROM version does not destroy any hardware at all.
Sascha
Thanks for your response.
But if it is just a hardware problem that can't be caused by an upgrade, how come I'm not the only person experiencing the same issue that started at the same time?
If it was just me it simply could have been bad luck.......
I'm just still not sure of my conclusions, but everything points at the upgrade to WM6. Let this be a warning!
I have not seen any similar reports in any threads before. Can you link us to specific messages?
It is very well possible that it's a software problem. After all you're probably using the same GPS/BT software in all these ROM up/downgrades you tried?
My GPS software is entirely on my SD card, after flashing a new ROM and formatting my RAMdisk it instantly knows my last position. Your software has IMHO probably messed up some file on your SD card that's related to your BT/GPS settings or so. I advice you to format your SD card, reinstall the clean GPS software on it, see if it still misbehaves.
http://forum.xda-developers.com/showthread.php?t=332945&page=17
You also entered a reply back then ;-)
I will re-install my GPS software. However, I've tried other programs as well with the same result (i.e. Speed Sentry). But that might be because I tried it after a first reset. And the reboot also appears when I have a different SD card in the slot.
Right now I'm waiting for my backup battery to be empty. Who knows, a 'real' hard reset might help.
@Maggy
Seems you were right! Removing the battery didn't work so I checked my GPS program's files. I found a recently changed file for the config and after I removed it it seems to work again!
Still a big puzzle why it started when I changed to WM6. But I'm updating my ROM at this moment so I hope to be able to answer the question if it is WM6 related soon.
Thanks for the help!
You're welcome.
And yes, you're right that I replied to that post but my memory is in my PC and XDA, not in my head
It's possible that there's a tiny difference between the way the config file is written in WM6 or WM2003, so switching from one OS to the other messes the file up.
I have the good habit of formatting the SD card when I flash a ROM.
Glad this item looks solved.
Even better: it doesn't look solved, but it is solved.
I went home using my GPS! YESSSS!
Knowing this it's time I start cooking my own ROM......... thanks to all the great people at this forum.
Hello All
After having read the message, I just try TOMTOM 6 with RBT2001 and have the same problem, tomtom is very slow, and after some time soft reset.
And I have this problem with the new ROM: 7.0c.40CS (WM6 AKU 7.0)
And I had no problems with the ROM: 7.0b.40CS (WM6 AKU 7.0)
If this can help you understand the problems ?
I guess you should delete \Storage Card\ttnavigator.bif, then reinstall Tomtom
It's even much simpler: simply delete the \TomTom Navigator 6\navigator.cfg file. You'll have to redo some configuration, but it works great again.
rvdrijt said:
It's even much simpler: simply delete the \TomTom Navigator 6\navigator.cfg file. You'll have to redo some configuration, but it works great again.
Click to expand...
Click to collapse
Good.
Tomtom work again.
Thank you
I upgrade to TofClock WM6 from WM2003SE. I have a big problem, when i turn off the phone, after it i can turn on again, without restart. Common manager doesnt work and standard method like Settig=Would you like turn ON? not too. Please help me. And excuse my english, iam Czech
I guess its a problem with the ROM's Comm Manager, try WM6.1 lurking in the Himalaya WM6 Forums
In the WM6.1 its the same problem. Whats wrong? I like WM6/6.1 cause i have skype, qip, skyfire and many other software, wich doesnt work on WM2003SE. Please Help. Any patch or fix for i t?
Nothing wrong with comm manager in TofClock WM6.0 ROM. I used it quite some time. Try installing WM 6.0 or WM6.1 together with Radio 1.17. Do not forget the hard reset after the upgrade.
Yeah, thanks for your responds and tipes. Today i reflash to WM6.0, TofClock again. Probably i forgot to hard reset after upgrade. Now it work good. So again, thansk very much.
Previously i have 1.19 Radio, so downgrade to 1.17 with flash and really good. Please lock
but i have a small trouble, if i active a com manager, so i cant close him. He still runing as process and in task manager too. Exist a fix or patch for this ?
That happens in several ROM's, comm manager is expected to be always active. It does no harm, if it gets in the way you can kill the process. If you really want to replace comm manager, try this one. Before you install this cab, kill the comm manager if it is running, otherwise it will fail to install. It is a very stable comm manager, compatible with WM6.0 and WM6.1.
Warning. The attached comm manager cannot be uninstalled. If you want to remove it you must perform a hard reset.
thank you very much man, now i have a perfect WM6. Work very well...so thats all i think please lock thus thread
yeah, exist a next problem, with Office, if i open a document in word, and i close word, the process: pword still runing and i must terminate it manualy with process manager. Exist any fix or patch? I have tofclock 6 fresh rom and office in this is 6.1 version.