wm2005/bt/voice activate - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I just bought a bt headset and the voice aqctivation does not work. What changes do I need to make, or software do I need to get to enable the voice activation for dialing.
Thank you to all for your reading and replying.

http://forum.xda-developers.com/viewtopic.php?t=28033&highlight=

Related

Lost Bluetooth Voicedial - MDA 3

Hi all,
Great forum, great phone. I've read through the various threads regarding not being able to initiate a voice dial using bluetooth, however, my phone worked fine out of the box. I could push the button on my bluetooth headset and call using voicedial.
BUT, that wasn't enough, I decided to install Microsoft Voice Commander (prior to reading these threads). The voice dial (via bluetooth died instantly).
I have since uninstalled MVC but still cannot use the voice dial without first pushing the button on the phone.
Anyone got any suggestions to remedy this problem.
Thank you all for you time
un-pair the bluetooth and then pair again, then soft reset, see if that works
thanks, good point, I haven't tried that...yet
I've had the same problem. I've tried re-pairing and soft resets but to no avail. Is there a registry setting affected? I can use the voice button on the phone to activate the built-in cyberon voice dialler but the bluetooth headset won't.
Found the solution
Need to edit registry: HKLM/Software/OEM/VoiceCommand
And if not present, add string value called "Path" = "\Windows\SDDialer.exe"
Works again now! Phew!

Scala rider intercom system voice dial

Hi,
I just purchased the scala rider intercom
its an intercom system for motors. I am having one issue with my N1 on voice dialing. I can give a command to voice dial and while the phone is "on" (that is, the screen is on) it works, kinda, it gives me the suggestions of the name I just said. when I press it on my phone it dials. ( so to be clear the input command is done by my scala head set.)
obviously this isnt how it should works. I need to give the command and not touch my phone at all. When my phone is "off" (that is, the screen is off) it does give a vibrate signal after I give the voice command, but it doesnt dial. I suppose this is because the phone wants me to choose and confirm the name i just shouted.
I tried adding 'mobile' to a name in my list. when voice dialing normally it only prompted the correct name (no other suggestions), but the nexus still wants you to confirm it. I cannot confirm a name while riding a bike so I actually want it to just call the first suggestion. its always right anyway.
the scala rider manual doesnt say anything, it just refers you to the phone's manual. but I cant get it to work.
I cant really test it on my 'normal' bluetooth headset, because it doesnt support any voice dial options.
does anyone know if I can force the nexus to dial the first suggestion? maybe someone has experience with voice dialing via a Bluetooth system and has another solution..??
any help is much appreciated.
Tom
I have a Scala Q2, however i have never used it for voice calls.
However have you tried to 'confirm' the call by pressing one of the buttons on you Scala. I think one is accept and the other is decline.

Bluetooth Dialing using voice command- need help

THis is my first post and I'm very careful not to make any mistake.
I have HTC kaiser. I use bluetooth headset. I teach classes and during my class I have the phone on vibrate. I keep the blutooth headset in my pocket and every now and then the button on the headset will be pressed and even though the phone is locked by S2U2 by pressing the button (call button) on the bluetooth headset it will activate the voice command and will dial some number.
It is annying and embarssing when somebody tells me you dialed and I could hear your lecture.
Is there any way (tweak) to disable the voice command for bluetooth. I use voice command but most of the time I will activate it throuh my phone not through bluetooth.
If anybody has a solution to this please help to resolve the issue.
Thanks
Moved as not ROM Development.
Thanks for moving to the right section.
Can any body help on resolving the issue?
Thanks

[Q] Bluetooth headset-initiated voice dial?

I searched and found only old information from last year on this...
Does anyone have bluetooth headset-initiated voice command dialing working with their Captivates?
If so, please tell me exactly how you are accomplishing this -- what bluetooth headset, what ROM, what apps, your procedure for initiating a call from your bluetooth headset.
I'm not interested in any procedure that involves looking at or even touching the phone itself. I need a solution that will let me place a call to the contact of my choice solely from my bluetooth headset -- just push the button on the headset, tell it who to call and reliably make the call to the contact and phone type (mobile, home, etc.) that I tell it.
I am currently using the new Andromeda ROM but would be very interested in hearing what new ROMs do this well.
Thanks!
I am running Paragon ROM and I am able to make calls through my car stereo via Bluetooth voice dialing. Leave the phone in my pocket, hold a button down on my stereo until the voice asks for a command, I then say "Call Contact". If they have more than one number it asks if I want to call them at home work or mobile. I say "Mobile". The voice then repeats "Call Contact mobile"
I am running Paragon RC5.1, but Bluetooth voice dialing has worked for me since I first flashed with RC3.

Bluetooth car device voice control doesn't work

Since some of recent updates I lost the voice control over my Parrot bluetooth car device. When I use my magic word PHONE or click the activation button of the Parrot, Note 9 screen shows 2 options - BIXBY and Google Assistant. And somehow does not return the command to the car device.
The calls work fine, but I used to make voice commands to make calls with voice commands.
Thank you in advance for any help.

Categories

Resources