Bluetooth car device voice control doesn't work - Samsung Galaxy Note 9 Questions & Answers

Since some of recent updates I lost the voice control over my Parrot bluetooth car device. When I use my magic word PHONE or click the activation button of the Parrot, Note 9 screen shows 2 options - BIXBY and Google Assistant. And somehow does not return the command to the car device.
The calls work fine, but I used to make voice commands to make calls with voice commands.
Thank you in advance for any help.

Related

voice dial through bluetooth headset?

Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
I use Voice Command, that allows voice dialling through my Jawbone Headset.
fmohiy said:
Hi all
I've searched the forum and couldn't find a solution to this.
I need to be able to activate voice dialing through the bluetoth headset call button so that i can call someone while i'm driving without having to look at my x1.
in my old tytn, i installed voice commander 1.2 and assigned it to the left side memo button. when i pressed the Bluetooth headset button once, it would open the voice commander and route the mic through the headset, so i was able to say the name into the heasdset.
but in my x1, a single click on my BT headset doesn't do anything and a long press only redials the last number.
i couldn't find any simple way to...
1-click on the headset button
2-voice commander activates and routes the mic to the headset
3-the voice commander takes my command and dials the number.
the closest i came to is to assign voice commander to a hw key on x1 not the headset buttn and when i press it, i must say the commande in the x1 mic not the headset.
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MSVC does by replacing the the dll with it's own.
My rom also does by replacing dll from HD.
Me too, I use MS Voice Command with SonyEricsson HBH sets and all work by pressing the button on headset which brings up the mic from voice command to command-the-phone
fmohiy said:
so. to cut it short....any body was able to dial using the bluetooth headset?
Click to expand...
Click to collapse
MS Voice Command 1.6 here. It works about 75% of the time. Sometimes it doesn't work. No idea why.
Of course, I also have no idea why the Bluetooth disconnects randomly, for no apparent reason.
The same Parrot CK3100 works 100% of the time with a Nokia E71-2, and it works 100% of the time with an old Motorola Q9h.
No idea what the freak is wrong w/the Xperia.
Both the Voice Command issue (25% failure) and the Bluetooth disconnection happens with both the X1a and the X1i that I just sold.
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
michaelthemage said:
Yes of course, if the bluetooth doesn't work then the bluetooth voice command cannot work. There was this bluetooth disconnect issue with the fw R1A but should be better with the fw update to R2A.
Did you update your phone yet?
As long as my headset is connected, voice command works 99.9%.
Click to expand...
Click to collapse
I'm on the UK R2A that was dated 20 Feb 2009. Bluetooth is still buggy.
There still seems to be some occasion that the phone goes into some kind of standby mode that causes Bluetooth not to be instantly available, and no doubt this affects the performance of Voice Command.
But, having said that: There are still times that you know the phone's not in standby, and Bluetooth + Voice Command is still buggy. Sometimes the phone responds with the Xperia speaker, and sometimes the phone responds w/the car speakers, and there doesn't seem to be any rhyme or reason to it.
fmohiy said:
did you just install MS voice commander and it worked straight away? or did you change any settings or do any button assignments?
Click to expand...
Click to collapse
I did not have to do anything special to get it to work the way that I wanted, except to assign the right silver button to Voice Command.
Can anyone tell how to make voice command or voice2go work with bluetooth headset?
Can you use all the available commands of MSVC?
Hi all, I have also installed the MSVC on my Xperia and the voice dial feature works fine, but I have tried to use other voice commands (just say "help" for a list of available commands) like "What time is it?" and it doesn't work.
Has anyone else tried it?
Update: I figured it out: you have to enable the "Status" option in MSVC settings!
MS VC R3AA013 & Jawbone Prime
Hi All
Had MSVC 1.6 on my x1 (R2a), all working fine, just been given a Jawbone Prime (thought result), BT linked up no worries. Tried to use MSVC over BT & not a thing. Can make a call manually n Jawbone picks it up, can use VC on my phone n Jawbone will pick it up, but picking up my phone with a BT sort of defeats the object of the exercise. Have looked all over XDA, and get a mixed impression, does a BT headset work with an X1 & MSVC?
Tried a couple of registry tweaks & nothin & I've now updated to R3 to see if that makes a difference but no joy.
Have I missed something here? Or am I just special?
I missed something!
I was using the wrong button, gotta use the assassin button & not the talk button. D'oh.
Having same issue as original post. WM6.5 w/ voice command loaded. Can't get bluetooth headset to initate voice command prompt. I have had to attach it to one of the buttons on the phone - but not ideal b/c of the incoming handsfree laws here.
Any suggestions?
Ok so I'm having a similar problem here. I have the X1a with WM 6.1 and MS Voice command 1.6 and my bluetooth is a Nokia BH-212. My blue tooth has a volume rocker and one master button for all functions. My issue is that yes I can answer with my bluetooth by pressing once, I can hang up the same way. If I press twice quickly it redials the last number. However when I hold the function button for the right amount of time (you get a long tone) it is supposed to activate the voice command prompt but instead i simply get the dialer on my screen. No prompt, nothing.
I have looked into the phone as much as I can to try and find something with no luck. I am a newbie so please be gentle. I just want that feature to work and my phone will do almost everything I want it to. Thanks all

Help With Bluetooth & N1

Hey I've just got a new pair of sony bluetooth headphones for my phone which I'm loving and they're working great.
They have a button on them that when I press it brings up some king of bluetooth voice dialing thing.
I'm wondering if there is a way I can change that to default to google voice search so i can use it for all sorts of commands rather than just voice dialling. Anybody know if its possible?

[Q] Bluetooth headset-initiated voice dial?

I searched and found only old information from last year on this...
Does anyone have bluetooth headset-initiated voice command dialing working with their Captivates?
If so, please tell me exactly how you are accomplishing this -- what bluetooth headset, what ROM, what apps, your procedure for initiating a call from your bluetooth headset.
I'm not interested in any procedure that involves looking at or even touching the phone itself. I need a solution that will let me place a call to the contact of my choice solely from my bluetooth headset -- just push the button on the headset, tell it who to call and reliably make the call to the contact and phone type (mobile, home, etc.) that I tell it.
I am currently using the new Andromeda ROM but would be very interested in hearing what new ROMs do this well.
Thanks!
I am running Paragon ROM and I am able to make calls through my car stereo via Bluetooth voice dialing. Leave the phone in my pocket, hold a button down on my stereo until the voice asks for a command, I then say "Call Contact". If they have more than one number it asks if I want to call them at home work or mobile. I say "Mobile". The voice then repeats "Call Contact mobile"
I am running Paragon RC5.1, but Bluetooth voice dialing has worked for me since I first flashed with RC3.

Bluetooth issue with car radio

I have a 2013 Chevy Spark with bluetooth. It has the voice control activation button on the steering wheel. When I had my Galaxy Note, this would activate S-Talk and I could use voice controls through the car. When I try with the One, an app pops up and quickly closes on the phone, then the radio says voice control isn't supported, but half the time if I start talking, the voice control works anyways. Does anyone know if there is a way to fix this? I am on ARHD, but I had the same issue when I was still completely stock with a locked bootloader. This could be a deal breaker because I do a ton of driving and use voice control a ton.

Steering wheel voice activation button and Google Assistant

Hello, I'm using Android Auto 3.1.581054 on my Honor 8 smartphone, and the Sync3 v3.0 multimedia system on a Ford Fiesta mk8.
If I don't use AA, i can push the voice activation button on the steering wheel, and dictate commands to access some of the car's functions (for example, change FM radio station).
When i connect my smartphone via USB and enable AA (e.g., to use google maps on the car's screen), the google assistant overtakes the steering wheel voice activation button; I can therefore only use it to dictate Android functions on the phone (maps directions, send whatsapp message, etc). I can't control via voice the car's functions anymore, at least until I disconnect the USB cable, because obviously Android knows and can nothing about the car's FM radio or whatever.
This is a very unfortunate behaviour, because to change the FM radio channel I now have to fiddle with the car's touch screen controls, that is very distracting while driving.
Is there a way to manage this problem? I heard that, on some previous versions (of what? AA? Sync3?), pushing the steering wheel voice activation button once triggered the car's Sync3 recognition, while pushing it for 3 seconds would trigger the google assistant recognition. Is it true? What happened to this function? E.g., see https://productforums.google.com/forum/#!topic/android-auto/SNCguGKYiZE
Doesn't answer your direct question, but I'm also using a Mk8 Fiesta, and wanted to point out that if you're already on one of Radio audio sources you can use the steering wheel next and previous track buttons to switch between stations within the preset group you're in. I've only tried this on DAB but it probably works on FM as well.
I've also found that sometimes it's possible to select whichever source and station you would like from a list using the steering wheel menu button (provided you're looking at the audio screen on the instrument cluster - not sure if all the trims have this functionality?). This works all the time without Android Auto connected, and sometimes when you're within Android Auto, but not always. I think this might be to do with starting up a radio source before connecting the phone, and making sure not to start any audio playing within Android Auto. Haven't had chance to properly test this yet.
Let me know if you discover any tricks!

Categories

Resources