Upraged to wm5.0....just one problem - MDA III, XDA III, PDA2k, 9090 Software Upgrading

First of all i'd like to thank everyone that made this possible and writing that amazing guide.
After installing it i had problems connecting activesync but restarting my laptop fixed that.
Anyways the problem now is the camera on the Pda2k.
I downloaded and installed the camera patch,and did the following:
1-download patch
2-copy patch to my docs folder on pda2k
3-opening .cab file through file explorer to install
4-putting device in standby mode by pressing the power buttong
5-waited for about 5 mins (it said to wait in the guide before doing a soft reset other wise it wont be updated in the registry)
6-after waiting for 5 mins i soft reset the phone
7-camera work
8-i install another patch and do the same......after soft reset the camera no longer works........i have tried everything........what can i do ?
now i know your gonna say search but please help me searching is going to be so hard specially in the 18 page topic !!
ive also read the guide again and again for this problem and the faq.
so help me please.

what patch did you install
after the camera that stopped camera working.. was it by chance the album patch..
next question what is the issue with the camera does it just not turn in or is it you cant look in the album
if you can ope the camera but when try and look in the album. it is due to the order in which you installed the cabs.

i feel so stupid now !!
it was just a silly problem must of happend when i played with the phones settings....the only reason the camera didnt work is the hardware button wasnt assigned for it.........silly me .
oh well thanx aloooot magpie2000k.
wm 5.0 rocks.
thank you xda developers !!

Related

Help with flashing ROM

Hi, I am new here and I need some help, I flashed my Ext ROM and added some applications on it and every thing works alright. But I am unable to get the XDA 2i automatic soft reset after installing an Hard reset, and since some applications needs clicking Ok button after Installation, i am looking for something to do that job. I remember reading somewhere in these forums and i spent a long time searching back but could not find where it is. I would be gald if somebody could help me.
Cheers.
peavey said:
Hi, I am new here and I need some help, I flashed my Ext ROM and added some applications on it and every thing works alright. But I am unable to get the XDA 2i automatic soft reset after installing an Hard reset, and since some applications needs clicking Ok button after Installation, i am looking for something to do that job. I remember reading somewhere in these forums and i spent a long time searching back but could not find where it is. I would be gald if somebody could help me.
Cheers.
Click to expand...
Click to collapse
hi there,
i'm also quite a newbie too, and i recently created a modified rom using Bal666's cool utility. i think i understand your problem with being unable to use the screen after a hard reset.
The problem is that the config.txt file runs a program called "tpdisable.exe" before installing the .cab files, to prevent users interfering with the install process. Simply delete this entry from config.txt in your extended rom image and burn again!
hope this helps!
thanx i will try and post u how it goes
thanx i will try and post u how it goes
PC crashed while updating ROM
does this make any difference - i've re-booted my laptop and am currently sat on the checking device info screen, how long does it take to check as its been a good 30 mins now..
any help appreciated
Put your device into bootloader mode before you try updating it, it might work a little better.
Remove the entries for tpenable and tpdisable from the config file and the rom itself.
If you want to stop those "This program is designed for...." screens, download WinCE CAB Manager and change the min and max OS versions to 4.21 and 5 respectively on the cabs you are putting into your extended rom.
Good luck.
HI pug thanks for reply, I have a question here...
When installing programs from ROM, some programs may need pressing "OK" to continue. Is there anyway this can be done automatically or can anything be changed in the cab file so we can stop that screen from comming up????
Any help apperciated.
Thanx in advance
Sorry PUG i think u already answered my question SORRY
changing the min and max os ver. with wince cab manager didn't work.probably b'coz the os detect the source build in version, not the cab version.

Cannot Hard Reset please help

Hi all,
i have Flashed my XDAIIs from WM2003SE to the new himalaya rom version,
everything works fine ,but the only problem is i cannot hard reset , it
i have a problem with my buttons (Home,email, explorer, ok), they cannot be used since i purchased it, so in this case i cannot hard reset my device, as i have to press mail button to confirm the hard reset setting,
Please any one have any alternate solution of hard reset or to format the persistent memory let me know
Try a program like spb pocket plus. It can put a button on your today screen to do a hard-reset & soft-reset as well, in the system section .
It's available on trial, so go for it.
Cheers, M
hi again , i downloaded the sbp plus and installed the program,i can find the button for soft reset , but here is no button available for hard reset , could u please guide me
The hard-reset button must be added manually, no idea why ;-)
So go to: start -> settings -> today -> items
select 'sbp plus' and push the 'options...' buttons. Now you can add it to the today bar.
Succes, M
hi thanks for your co -operation , i tried to follow the procedure as you told , once after selecting the today--items--Pocket Plus--options , here comes a new screen titled "today Plug-in" i click on Add button, and a new "untitled" button is created on left hand side, than i click on items on the same screen ,i get list of category "indicator, programs, my documents,system,settings,custom" i tried to find the reset utlity all over the categories but i cannot ,
your comments are appreciated ,i have installed spb plus version 3.04 buid 4195
I have to install it first so give me a few hours for exact details
Hi Kevin,
I'm terribly sorry that I wasted your time; I must have been mistaken fot I can't find it back myself. I looked spb pocket plus, battery pack pro & some other tools but can't find it back for you.
Probably you need the e-mail button as well to put it into bootloader? Or is BA lacking such a mode? cause my magician is havin a hard-reset when coming out of bootloader.
Hope it helps.
Sorry, M
oh please. If you're in WM5, you can't hard reset just like this.
Put it into the mode which you can format storage....
do a search in the future.

this concludes the beta test...

Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.

[windows live mobile] not working...

hi, i ve try several time to install version of windows live for mobileon my diamond, even the link in xda developper forum, the software is welle install. At the end of the installation, every time it says: synchronization failed, i ve try 4 version, and it is the same, my username and password are good, because i ve manage to connect via palringo software...
could you please help me?
i ve got a sfr diamond from france version wm6.1
thank u all
Hi Nightcrane,
sorry to hear that your WLM is not working...
I've had some probs myself as well with it, but I found a version which should work...
1st of all...remove all what's left of your WLM on your mobile...
after that, I have added 2 apps for you you have to install:
-windows live noIm 0409
softreset
-Windows Live 10.6.39.1300
softreset
LINK FOR 2nd app: http://www.4shared.com/file/75788789/558cd374/Windows_Live_Messenger_106391300.html
EDIT: For some reason I can't upload the other file
After that you should be able to connect to Windows Live....
give it a try mate
good luck
regards
Jeroen
very sorry, maybe i am dumb, but i do it and it does not work, but i think i am not doing the right thing, when i install the first soft, at the end of the installation it doesnt ask me to reset my htc. the second one yes, so maybe i take a wrong way... when you say soft reset, i switch off my phone? and when i install the first file, and then the second one, how can i know if the first programme is removed?because normally, it has to ask me if i want to remove the old version...
sorry for my bad english, and my knowledgeon that type of problems
regards...
nightcrane said:
very sorry, maybe i am dumb, but i do it and it does not work, but i think i am not doing the right thing, when i install the first soft, at the end of the installation it doesnt ask me to reset my htc. the second one yes, so maybe i take a wrong way... when you say soft reset, i switch off my phone? and when i install the first file, and then the second one, how can i know if the first programme is removed?because normally, it has to ask me if i want to remove the old version...
sorry for my bad english, and my knowledgeon that type of problems
regards...
Click to expand...
Click to collapse
Hi mate,
I don't think you're dumb
No, I think i know why it doesn't work for you....you need to install those apps in the way I told you, INCLUDING a soft reset between the 2 programs...and a soft reset can also be done by pressing the powerbutton to turn the device off...wait about 10 seconds and turn it back on...
afterwards you install the 2nd one WITHOUT uninstalling the 1st one...because that one will be overwritten with the new one....
It should work...that's the way it works by me...I've done the same thing...
Good luck fella
Windows Live Mobile
I have downloaded the Windows Live cab from http://www.microsoft.com/windowsmobile/mobile/wl/languages-en-us.mspx , but it doesn't contain the Messenger sw.
Where can I find it? In a oldest ROM i have it installed......
bye
TheJackall

T5355 stuck on "TOUCH Diamond2" screen

Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355
Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
I don't think you would be experiencing these problems with an original topaz
Please take care this is a HTC CLONE
Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643
run with a rom in bootloader, it shud work
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.
If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?
Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.
My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".
nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !
help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?

Categories

Resources