Hi Guys,
I would like to know if is there a way to
a) Get broadcom bt to be loaded on WM5 (Preferred)
b)Get A2DP to work on WM5
a) Get broadcom bt to be loaded on WM5 (Preferred)
Click to expand...
Click to collapse
i doubt it, im no expert on wm5.0 or BA devices, but i would say that broadcom bt is only designed for 2003se or below, since no ''official'' wm5.0 for BA exists, they wont have developed the BT software for it, but i think MS are wanting wm5.0 to be more MS on the BT side, im sure i read that somewhere about wm5.0.
i hope something works out for the broadcom version of BT cos i liked that one better, i liked to be able to browse other devices, but with the MS build, you cannot do that. 8)
does anyone have a solution for this yet ?
HP offers WM5 update with broadcomm drivers inside. They _cannot_ be used on our devices because all DLLs are XIP.
Related
Hi all
I have got Blue Angel:
ROM: 1.42.00 WWE
Radio: 1.13.00
BT: 3900
Last week I upgraded to the T-Movbile 1.42 Rom. I then installed the A2DP profile patch and was amazed that my Omiz OMS600 headphones were actually working using the high quality audio profile, and they were working very well.
The other day I did a hard reset to sort out a few things and left it at that. Later on when I came to reinstall my A2DP it wasn't working, nor was using the headphones as just a normal headset. I tried all sorts, including downgrading my ROM because at that point I was wondering whether or not it was actually on a previous version that I had it working.
Anyway... eventually I decided it was the headphones that had an error so emailed Omiz who were very helpful and sent me the download for their firmware flashing utility. This upgraded the ROM of my headphones from 1.06 to 1.25. I can now pair my headphones as a headset but not as High Quality Audio. I can get it to add a High Quality Audio shortcut in BT manager but when it trys to connect it says: "connection failed". Before it was also saying "service unavailable on device" or somthing similar.
Any assistance would be good.
Thanks a lot.
s_t_harvey said:
I then installed the A2DP profile patch and was amazed
Click to expand...
Click to collapse
Can you, please, tell me where to find this patch?
Someone knows if it works for wm5??
Thanks!
A2DP & WM5
Hi there,
I got the patch from: ftp://xda:[email protected] Upgrades/BT profiles for build 3500/
But I'm not sure if it will work on WM5, I think I have read that it will not, this is my main reason for not moving to WM5 yet... although at the moment while i can't get A2DP working I am not much better off.
How are you finding WM5? Is it reliable enough to compete with WM2003 yet, or is there still a bit of work needed?
It doesn't work under WM5. WM5 has a Microsoft bluetooth stack, this patch does not apply.
WM5 on the BA is quite stable if you have the time to work with it. I am not going back. If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
A2DP on WM5
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Re: A2DP on WM5
s_t_harvey said:
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Click to expand...
Click to collapse
Yeah I think so. Apparently it's not out in the wild yet, but w/ BT 1.2, a lot of people will be looking to do more with it.
shuffle said:
WM5 has a Microsoft bluetooth stack, this patch does not apply.
Click to expand...
Click to collapse
Did you mean: "the mamaich rom has microsoft bluetooth stack". I really hope we can get WM5 with the same stack I had on w2003. (Broadcom, I think). Maybe it is out there but I can't see it...
shuffle said:
WM5 on the BA is quite stable if you have the time to work with it. I am not going back.
Click to expand...
Click to collapse
I agree. By the moment, I'm very pleased with the performance of WM5 on my BA. It actually runs faster than w2003! And I'm beeing very objective, believe me!
I'm having a big annoyance with writting (sms, word, etc) as the spelling isn't allways what I wrote. On the SMS window, it seems the screen gets redrawn all the time and it loose some words...
The other big is not having A2DP. I think is very frustrating having such a nice machine without a good software that makes all its goodness work! :?
Some delayings on the screen repainting and (I'm using Pocket Informant) slow performance on the everyday tasks as opening the contacts list, or changing toanother program, for example...
shuffle said:
If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
Click to expand...
Click to collapse
What do you mean? To have the BT on a low-power mode more or less?
cheers...
looking 4 answers: ad2p & bluetooth & wm5
somebody with an answer to this theme?
WAS: ad2p & bluetooth & wm5
It is somehow possible?
Anybody there? :roll:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
shuffle said:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
Click to expand...
Click to collapse
some URLs????
Thanks!
How do I enable A2DP on my BA??
Hello!!
I have searched the forum many many times and visited wiki, but I could only find 2 threads which is close to what I need to know. This is 1 of them.
I have got Blue Angel:
ROM: 1.40.00 WWE
Radio: 1.12.00
BT: 3900
This configuration came from the recently rom upgrade from o2.
It seems to me that it's possible to enable A2DP on a BA running on WM2003 SE, which allows me to stream music to a bt headphones??
However I just could not find a thread which has an instruction on how to do it. Not even on wiki. After reading some threads, I came to my own conclusion that I need to upgrade me BT to build 3900 and install a patch??
So this was what I did,
Since my BT is already 3900 "offical" version, thus I didn't do anything to it.
I d/l this file BA_OEM_AudioGW (1.33g.00).CAB (83KB) and ran it on my PPC. I then got the audiogw.dll in my windows folder.
That was all I did. It didn't work of course. I have another file, BroadcomCorp_BT1.0.0.3900.cab but didn't use it as I'm already on 3900??
So I was just hoping that someone who has done it and was successful, could point me in the right direction!!! Thanks a lot!!!
anyone tried running both cab loacted at
ftp://ftp.xda-developers.com/BlueAn...age BT 1.0.0.3900 and audiogw.dll - 1.33g.00/
if it works, do let me know. I currently do not have a bluetooth headphones to test with.
I have Omiz headset (with MP3 and radio FM) and due to work with my Magician I had to manually change some registry entries. Point was that my PDA was not correctly identified as a A2DP device (only HF). I paired my PDA with normal BT dongle with A2DP profile, found registry entries with dongle mac adress and copied manually keys coressponding with a2dp service to folder with my headphones profiles. After all that it was possible to chose headphopnes in BT menager as stereo audio receiver.
Maybe its similar and u should look in registry...
jarekt, can you post those registryvalues please?!
Can't get streaming audio to BT headphones
I still have had no luck with the BA_OEM_AudioGW (1.33g 00) Cab or any registry settings under WM5.
BT a2dp WM5
have you tried the file (.cab) i uploaded in BlueAngel under uploads, it let me pair BT Stereo under wm5. Nevermind I looked someone deleted it dont know why. PM me and i can send if you want, I tried to reupload but Uploads appears broken.
I am on thesame situation of errorist.
My machine is on Broadcom 3900, and I want to make A2DP work.
If anyone can shed a light on how to make it work, I'd be very very grateful.
BTW, I have a Motorola HT820.
UPDATE:
I have installed the 3900 stack + audiogw dll even though I had a factory-installed 3900 stack, and I managed to connect in handsfree mode.
I still have not found out how to connect in A2DP mode though...
Any help is appreciated.
Hi All
I dont know how useful this is going to be, but i spent ages doing research to get my ht820 and my 02 xda 2s working properly, and when i did, i wrote a semi bad guide here
http://www.corecodec.com/index.php?option=com_smf&Itemid=29&expv=0&topic=2840.0
if its any use i'd be tempted to maybe write it up proper and put in in the wiki, either way, try some of the steps or files ive listed (most of them are from here)
but it gets it working with TCPMP aswell, which is a lot better than WM10 anyhow
good luck
BTW: ivans rom uses the broadcom stack, so the patch may work, however i dont have the headphones to test it with
i've onstalled this two cabs too, but new profile didn't appeared. Bay Be some registry values didn't appied? who did this patch?
Hi, trying to run this Sniper software. Unfortunately I have the non-standard BT stack.
Has anyone got whatever I need to re-install the original stack, please?
Oh and can I not have them both installed simultaneously?
As far as I know...
The Alpine came with the WIDCOMM BT Stack, not MS. I don't know where/how you'd install the MS one. Did the Himalaya's come with an MS Stack. I'm not sure if your could flash a Himalaya ROM on your Alpine.
Out of curiousity, why do you need the MS Stack? What are you trying to do?
Justin
I'm trying to use an application called Sniper and it will only work with MS BT stack...
Hi,
is there a way in order to extract the BTstack from the rom ?
I've a Qtek 9090 with WE2003 and i'd like to extract the BT stack as a cab (or similar) from the rom.
thanks in advance
Bigbest
In theory yes, but it will work only on this specific rom and on the same device.
Why would you do that, if all ROMs for BA have built-in BT stack and you have upgrades available?
No, i have not. I 've a problem with tomtom BT stack. To risolve it, i need to replace the original file on the file installed.
jakubd said:
In theory yes, but it will work only on this specific rom and on the same device.
Why would you do that, if all ROMs for BA have built-in BT stack and you have upgrades available?
Click to expand...
Click to collapse
Slow down... WHAT TOMTOM BT stack??? You (or me) misunderstood something. TomTom does not produce Bluetooth chips and it does not provide it's own BT stacks. It just uses BT stack built-in the device you installed it on (or in which it's embedded).
If TomTom screwed your BlueAngel's BT stack, just make a backup and make an Hard Reset.
Hi,
i 've noticed when you install ttm that it installs a BTstack.dll (or similar). This file is not compatible with BT stack built-in the device so i can't use my bt handsfree.
I've found the solution. After a HR, i've copied all file BT*.* from \windows and then, after pairing with BTgps, i've replcaced them into \windows.
The second solution is to install BroadcomCorp_BT1.0.0.3900.cab that you can find in this forum.
Bye
B
jakubd said:
Slow down... WHAT TOMTOM BT stack??? You (or me) misunderstood something. TomTom does not produce Bluetooth chips and it does not provide it's own BT stacks. It just uses BT stack built-in the device you installed it on (or in which it's embedded).
If TomTom screwed your BlueAngel's BT stack, just make a backup and make an Hard Reset.
Click to expand...
Click to collapse
Can Anyone Help Me To Find An Working Broadcom Bluetooth Manager Stack For My Xperia?
any wm5+ version would work
I'd suggest you search the forum with those keywords
but to tell you the truth I haven't come across any braodcom stacks
since wm2003SE so not 100% sure there are any but haven't really looked that hard
Out of curiosity, what functionality are you hoping to gain by switching stacks?
will
i tryed hard looking for keywords using google and i have seen many CABs but they didnt work because of the license,
and sonus i think that Broadcom Bluetooth Stack its much more professional than the normal ,i think Broadcom Stack has much more bluetooth plugin`s than the other plus you feel free when using it
so anyone have a idea where i can download it free and it must be for wm 6.1 or 6.5
There was a working cab to change Dell X51v MS BT stack to Broadcom. But you probably need some hacking in order to make it work for other device. Broadcom stack has more profile but also has it's own problems (e.g. system volume control is not working over A2DP). Do a search on TP2 forum (since it's using broadcom stack) and you will find out.
Why would you want a Broadcom stack? I spent 2 months trying to get a Microsoft Stack on my A696 which only supports Broadcom. It was a frustrating and fruitless exercise, though I did manage to get an upgraded version of Broadcom working at one point it didn't work very well and didn't do anything my old version didn't do already. None of the Microsoft ones would run at all though, and I tried just about every trick possible.
With the Microsoft Stack you can use fun things like Bluetooth Mice and Keyboards - something not yet supported by Broadcom stacks. I'd stick with that imho - its quite fun and useful
That search to try to get a bluetooth mouse to work with my A696 PDA is why I'm registered as pdamouse...
Peter
guys
guys i still want that bluetooth stack no matter just any working broadcom bluetooth stack for windows mobile 6.1,
i just love how it works and it gets information ,it has many profiles that are not in the normal bluetooth stack and it provides many options at the same time so pls guys do anyone have any idea where i can find such stack to download it and use it for free?
same question as error man
Hi Guys, is there a good stable bluetooth stack for the TP2? i have lots of issues getting it to work properly with my volvo v70.
sonus said:
Out of curiosity, what functionality are you hoping to gain by switching stacks?
Click to expand...
Click to collapse
It might help solve the disconnect issue with WM devices and several handsfree devices.
I just tried one of the WM 6.5 Roms on my Kaiser (TYTN2).
It will still disconnect the headunit in my car (Kenwood DNX8220BT) after a call is finished. I was hoping WM6.5 would improve the Bluetooth stack.
I also have an Experia X1 which is exhibiting the same issue
Mautje said:
It might help solve the disconnect issue with WM devices and several handsfree devices.
I just tried one of the WM 6.5 Roms on my Kaiser (TYTN2).
It will still disconnect the headunit in my car (Kenwood DNX8220BT) after a call is finished. I was hoping WM6.5 would improve the Bluetooth stack.
I also have an Experia X1 which is exhibiting the same issue
Click to expand...
Click to collapse
I INSTALL THE BROADCOM STACK and the system dont boot again, i must to make a hard reset.
pdamouse said:
(...)
With the Microsoft Stack you can use fun things like Bluetooth Mice and Keyboards - something not yet supported by Broadcom stacks. I'd stick with that imho - its quite fun and useful
(...)
Click to expand...
Click to collapse
Not wanting to came across as a seller, but have you heard of Teksoft BlueInput?
They're almost there!
How do I know this? I'm the one who asked Teksoft to build such a a program!
Been using several HID devices with my MS bluetooth stack WM phones, last years. Even a Logitech diNovo Mini, a "small" keyboard with touchpad.
Not sure if anyone out there is aware, but a lot of people (myself included) have been having some problems with the Widcomm bluetooth stack that is being used in the Rhodium (touch pro 2, tilt 2) and i possibly the Topaz (Touch Diamond 2/htc pure). Does anyone know if it would be possible to take a the MS bluetooth stack that has been used in other phones in the past, such as the touch pro from last year, and cook it into the newer touch pro 2 ROMs?
Bump. I'm interested in this question as well.
i am interested 2 because older htc bluetooth stacks are working for me
Count me in. I would also like to see this cooked or even some solution for those of us who want to change to older one.
I don't think that drivers are available. I'm not sure, but I don't beleive any Rhodium ROM (even the early dev builds) had M$ stacks.
Sleuth255 said:
I don't think that drivers are available. I'm not sure, but I don't beleive any Rhodium ROM (even the early dev builds) had M$ stacks.
Click to expand...
Click to collapse
Hey Sleuth!!!! Good to see ya, been awhile!!!
You may bve able to use the different stack. There are other BT stacks that were installable via cab for devices past. However, as Sleuth pointed out, unless you have access to device specific drivers it will take a bit more work than just cooking in an available package from a previous device package.
Give it a try. If you know about disassembly, try to compare the stacks. Just remember that there are not just the BT drivers you need to worry about, but also all of the shared resources that the driver uses or is used as for some audio functions, in example.
Just a note, but plenty of people had problems when they switched to the Microsoft stack in the titan, TP, etc. The fact that they switched back to the Widcomm stack was a blessing for A LOT of people who weren't able to use their last gen devices with many Nissan and Infiniti vehicles with both bluetooth and navigation. It just didn't work for us before the TP2 came out, unless you kept your old HTC Apache for this long.
GSLEON3 said:
Hey Sleuth!!!! Good to see ya, been awhile!!!
Click to expand...
Click to collapse
yeah, I was almost ready to jump ship to android or even iPhone but then the Rhodium appeared. This is a bonafide cool gizmo the likes of which I have not seen since my Palm TT3.
MS BT Drivers
I would also love to have the MS BT drivers in the Rhodium. with Widcomm the voice dialling does not work properly, the phone does not connect to my Win 7 laptop. All this worked just fine with my TyTn II.
Yep, would be nice...
Driving a Volvo with BT, and up to now, I could pair it with my O2 Atom Life, HTC TP and a lot of other phones & PDA's.
Since i have the TH2 though, i can't get the sound working while trying to do a hands free call.
Recently I found a workaround by disabling the Data Connection in Comm. Manager, but this still stays a cumbersome solution.
I would appreciate the old MS BT stack of the TP on my TP2 as well
Iam not sure... about this but what i know is the devices which use generic bluetooth stack (microsoft) has bthuart.dll in oem drivers and bluetooth packeges in sys atleast thats what i have in my device..