Related
SX66 BLUETOOTH Expired
Hi. I can not use Bluetooth since I downgraded from wm2005 to WM2003. When I set up Bluetooth, it says”
BTTrayCE
Sorry! Bluetooth can no longer be used because the license is expired
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73COABB9A9074DD3B175
3515CD8
Please help. Thanks. I have tried completed install from original rom CE nad Radio. But the same problem. The extended rom is dead I can not upgrade it since it faila at 1%.
Please help Thanks.
Hi
Did you carefully follow WM2005 -> WM2003 process described in wiki ?
It's very important that you resize, reformat ExtROM and do some other stuff before flashing back to WM2003.
Good luck
i have the same problem.. since octobre without solution
Hi
I ask again.
Did you guys restore your ExtROM correctly ?
(using Repart_DOC.exe tool)
GO to wiki -> blueangel -> blueangel WM2005 page -> how to downgrade....
Good luck
hi robal
I tried but when i use Repart_DOC
I set size 16384 or other sizes but if I click format now, the error message pops up"
Create handle failed.
Please help. Thanks!
Hi
Maybe You forgot to do as described in point "3" of downgrade process :
Prep your WM5 device by formating Storage and Hive.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse
This should've been done when you had WM2005.
I think it's important to do it, before trying to run Repart_DOC (on WM2003).
Any idea ?
If you've forgotten to do it. You probably will have to intall WM2005 again, do it, intall WM2003 and Repart_DOC it. HUh
have fun
DEAR robal,
Thanks for your information. In fact I did everything like you said before. but nothing help.
I know that I have to creat an extended_Rom in order to get it work. (this is not a big deal since we can install manually.
The most imfortant thing is the bluetooth error. Please help me find a sollutin for it. Thanks!
Hi
So you say, you have WM2003 installed with Extrom CABs from some official ROM ? OK
I'm not familiar with this BT failure. Please tell me exactly what ROM are you using ( CE , Radio, ExtROM )
And what version of BT stack you have.
This error is caused by a portion of the Bluetooth memory being overwritten by something else. The people who are trying to help you are right...you need to reflash the device because something didn't work correctly last time.
I had a tool that restored BT MAC-address, but I cannot find it on HDD.
It was sent by imate tech support as a fix for the "bt license has expired" error, so you may try to contact them, or search this forum.
please mamaich if you can find it this will be very helpful
Dear mamaich,
Thanks for your great imformation. I love to get it as soon as you find it. Again, thanks for your pricious time to repond.
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
new problem come out after previous one
hi, I have another problem so.. i need your help.
before, My sx66 problem with bluetooth and the Extended_ROM did not exist.
Now, after many tried to install rom from Tmobile, O2. sx66 over and over again, the extended_ROM is now okay to install but sadly the Storage doen't exist any more. Also some contact, task .. pop up after full installation. Finally,after extended_ROM Complete installed, window
Connection Flash Mangaer
pop ups" Saved data is corrupted.
System will erase all data to fix
this error
Yes No
but It does fix anything after I click yes button.
Please help to recover my storage. If there any software that can partition rom for ppc. please share.
p.s. the bluetooth now is freezing.
what u hv to do is use the Ext ROM Unlocker and use Repart_Doc...Set the size of yr Ext ROM...say 15 MB or so and then do the Repartitioning...now flash yr device...u will get yr Ext Rom Back with no such errors as reported by you
problem solved.
Dear hdubli,
Thanks for your help. Everything works properly now. Now my sx66 works at factory shipped. I am very happy.
Specailly thank to Hdubi for providing an exellent solution.
hdubli said:
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
Click to expand...
Click to collapse
Hi hdubli, a question, what is the ROM 1.4 of the blueangel?
Hey guys, before anything please let me thank you for this amazing site. You have made a complete n00b to a power-user in 2 days flat. Please do allow me to tell you my story. 2 Days ago I got this thing called O2 XDA IIs (HTC Blueangel) and I got it for around 300US$ (Unlocked/New) was not so fond of Windows devices so intended to sell it off asap and get some other phone, was just doing a little R&D on the net to see what all is available for this thing. When I came across to your site, here's when I got so intregued by the capabilities of this thing.
First I intalled the latest ROM for my device, after getting little confidence I installed WM5 with my fingers crossed. Its all done now but have a few things to ask you guys.
1. When you mentioned about the EXTROM you said that you'll have to copy the files on the StorageCard\ExtRom when all I did was copy nk.nbf into the folder called WM5_Pack_V3 and ran the installer. I did run the batch file to get the oper_code from the DeviceData file. It was all done, I was really scared but now am worried did I do the right thing?
The Device Information TAB shows
ROM Version : 5.03.02WWE
ROM Date : 03/02/05
Radio Version : 1.12.00
Protocol Ver : 1337.42
ExtRom Ver : TuMa v1.3
2. It took me long enough to install this what all tweaks should I do to it so that it stays at the maximum bug-free current stage. (Hope you get me)
3. I need the starting screen to display something other then those scary 3 colored lines
Some things that I noticed after upgrading:
1. WM5 It's a little slow, but definately much better looking and show-off value.
2. I have a Wi-Fi enabled ADSL router at home by which I connect the O2 and other devices its working fine on.
Any help/suggestions/comments are welcome.
A brief intro for me would be have worked as a beta tester for many symbian application providers, was a complete S60 geek and am majorly into bikes & bike photography
Nothing said yet?
Im not sure I understand that whole Extrom deal, but what I can say is that the files that were in the extrom folder inside the upgrade pack must be put in the storage card in the same folder, but that is only if you want MMS and have a camera, if not, then there is nothing to do, unless you edit the Cfg.txt to load all your apps and settings after a hard reset. I guess that if you are able to use the device, you did everything ok as far as the flashing goes. it is a little slow, but its come a long way from the first versions, those were slow as hell, thanks to Mamaich and Tuatara and everyone else this version is running great!
as for the 3 color bar start up screen, there is nothing you can do about it...
Yeah I really forgot to thank Mamaich and Tuatara for their awesome work, now I am really scared as I dont like the slow response and am unable to downgrade. ActiveSync shuts down whenever I try to run the MaUpgradenoID.exe file activesync stops and it is giving errors in connecting, gets DC frequently. And moreover the Manufacturer supplied upgrade is also not working it gives a CountryCode error. Am really confused and scared now what to do?
Well I did not get any help but with loads of tinkering I got the thing done, I wanted to know why was WM5 so slow, otherwise the interface is loads better then the current CE I am using.
I have the Cingular version SX66 Blue Angel. I was able to update it without any problems. Usually speed is very different with those who flush the registry and with those who don't. Make sure you flush your registry after you completed the update.
Mine is faster and way more stable than the other version I had on it. Remember to follow all instructions exactly. if there is a link you need to check and make sure you do the format, change the ram size on the device, then upgrade.
There are no instructions on how to flush the registry can you enlighten me on this?
manav said:
There are no instructions on how to flush the registry can you enlighten me on this?
Click to expand...
Click to collapse
During the flashing process, the wiki instructs the user to do a hard reset
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_HardReset
You should answer NO, YES, YES to the boot questions.
Hmm yeah, I did do that. And just am in the process of downgrading from the buggy WM5. It doesn't work out for me.
and THAT'S where I got problems!
in the manual, it says I have to download my latest favorite ROM version, and FROM that file i should copy the nk.nbf the "DOWNGRADE TO WM2003SE" folder..and that's what seems impossible to me, since the Rom-update i downloaded is an .exe application, and not a .zip or .rar archive..
so how should i get the nk.nbf file out of the Rom-update .exe file..?
help
well some were in the same documentaion it should also say use rar or zip to unpack it (being the exe file).
Pls spend some time in wiki you might find some other answers
yeah i had tried that already back then butthat didn't work either..when i try that it still just starts running the program.. :?
Try these instructions with your exe file:
http://forum.xda-developers.com/viewtopic.php?p=233903#233903
Hello people, I have a question for you. I recently did the Upgrade of my Qtek 9090 to WM 5 (device data now is PH20B WWE 5.03.02 1.12.00). It seems to be working fine (have yet to test wireless connection), but I discovered that I can't get the camera on the phone to work. For some reason, it simply does not react to camera button. It also does not react even when I try with the manual startup of pictures & videos application. Does anyone has any idea how to get out from this one? If this is any help, the original phone data were PH20B 0 B WWE E DANGA102 1.40.00 0 0 1.40.147 1.12.00 12.00.
Thanks a lot
Simple but crucial question: Which WM5 rom you flashed? Have you read specific information about this rom? maybe this one requires some post-instalation operations?
Basically, I found this ROM on www.buzzdev.net, and it only stated BA WM2005 5.03.02WWE - standard upgrade. It is basically the only one which worked for me, since every other dumped me (the model of the phone matched the ROM). However, there were no additional explanations for this, so I am stuck. Is there any registry tweak, or aditional piece of software which could make it work, or I will have to go looking further for better ROM?
As long as we don't know what is the problem with the ROM, we cannot help you - some ROMs just had camera support cut out, others needed installing additional software, some had errors.
About model/device check: please take any recent WM5 rom (baniaczek's for starters) and just read carefully flash instructions from Wiki - there is no problem with device check, if you understand what you do and how you should do it.
Thanks Jakub for good advice, I've been doing some reading and I tried baniaczek's latest issue from the web. However, I've got stuck. Namely, MaUpgradeUt_noID.exe does not work in my case. It simply tells that there has been communication error with the device, or if it starts it tells that this ROM upgrade utility was not designed for this device. I tried the other way with BaUpgrade.exe, with usage of EditFix.bat and xda3nbftool.exe, but it seems that I'm doing something wrong - each time I get the message that the specific ROM was not written for me and that I should check my vendor. Is there any way to get out of this, since now it seems that I can't do no upgrade or downgrade at all?
Thanks a lot in advance, I know this is mostly due to my mistakes and usage of unchecked ROMs.
Thank to everyone who was trying to help me. I did some experimenting in order to solve the upgrade issue, and I solved the problem. This is how I did it: Namely, I downloaded KitchenAKU3.5v2-xplode, which also contains useful readme. Basically if you want to have MaUpgradeUt_noID.exe to work for you at all, you have to put the device in Bootloader mode (press power + record simultaneously). After that, the upgrade went smoothly, after I designed my own rom, which was very easy with xplode's tutorial.
One more thing I did was that after the upgrade, I did a soft reset and "cleanup" of the device. after the soft reset I changed following options on the boot screen using camera and record buttons:
“Enable KITL” set to NO
“Clean Registry Hive” set to YES
“Format Storage” set to YES. (again on xplode's instructions)
After that, I confirmed settings with pressing of the mail button. One minute later, I had fully operational and very fast QTEK 9090 running WM5.
I hope that some things I did will be useful to other people trying to fix their blue angels. And of course, thanks to Xplode for making an excellent user-friendly upgrade.
I have a HTC Wizard G4
Model T-Mobile MDA - Wizard 200
I tried flashing it with farias old build and it stoped at 99% then error occured now i only get the bootloader screen
I have downloaded an upgrade rom from mda website and tried it but it says i need a different version to update
My phone currently shows only with the red green blue screen
IPL 3.08.0001
SPL 3.08.0001
What on earth can I do to get it working again?
Im currently trying step G4.3 on page http://forum.xda-developers.com/showthread.php?t=310831
Downloading wizard love now, please advise if I will further ruin the phone or if I am on the wrong path, btw i need this phone urgently so will be going ahead with the next step in about 45 mins, will keep u updated unless I am stopped by one of the uber leet on the forums
Woohoo!
Ok so I ran the step as mentioned above. It is now booting into wizard love version of windows! Could whoever is responsible for creating that walkthrough and tool please email me directly at [email protected]. I would like to give you $50.
I dont know if I should now bother flashing a new rom as it seems to have what I need and I can always install apps on there myself unless anybody else disagrees with that? (is it outdated and a crappy OS or is it fine to keep on here?)
One problem is that it is not a qwerty keyboard layout but functions as one
For example - y is z and ? is ~
Are there any software apps out there that allow you to configure the keyboard layout?
Kindest regards,
Nic
Winmo5 is a fine OS. Have you tried Resco Keyboard Pro? I use it and really like it. WM5 is older, true, but is considered by many to be the last STABLE version of windows mobile. There are many apps and tweaks you can apply that will upgrade your device considerably.
I have tried hitting record + power + reset and still no dice.
I did this last Jan to my BA with few problems, put in the wm6.1
Wanting to install this one WM6.5
I also installed the Wizard Service Tool and it doesnt seem to work. It will give me info but the hard reset and other rom features don't want to work.
is there a workaround for gettin to the bootloader? Or should I take this all as a sign not to brik my phone? ;D
thanks,
chela
hi , i'm new on the forum...i think i've the same problem, on my PDA2K..
I try to install a new rom from wm2003se, using a file called "preparazione BA"( i think i've unlocked the extrom), then i normally setup with the MaUpgradeUt_noID.exe..But now, when the upgrading is completed to wm6, i'm not able to load the bootoption..i can see 4 colour bands (green blue red white) but no option to boot. The rec+photo+reset seem not to work.
Could anyone help me\us??
Regards at all
Davide
after 2 hours..here are some news: my pda2k display became with the 4 color but there was writen something about R none, G none and (version onf the rom i tryed to install) then pressing rec+cam i saw for little fraction of second the menu enable kitl ,clean registry, etc.. and then suddenly the wm6 starts. After installing the OS ask me to reset..Well, it return to the same 4 color, and the only word i see is R1.11.00
I'm getting crazy...
Please big chef tony help me!
i don't know what to do now...i'm little down
Davide
...lol maybe because I dont do this often enough, but this case was solved with a little bit of RTFM!
I didnt realize I was pressing the wrong fsking button! derr!
Here is Chef Tony's post...should carve it into my desk!
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
Hello, my ppc always dispays the four band with R1.11.00 written..After a lot of reset(often unplugging battery) and photo+rec, i was rarely able to display the boot option, but here is strange what is written(attached photo n°2): R None, G None, D 1.21 Michy.. Then pushing "mail" the OS start installing wm6, then, it ask me to boot so i would be able executing extrom to install cab file.It resets and then it appears the famous four band with R1.11.00
Any idea??
I've finished mine....Aww!!
Regards
Davide
P.s. think it's important: my bootloader is v 2.08
i've solved my problem..reading on other forums, they suggest to install a rom WM5, where there was radio upgrade too..After i was able to install WM6.1 ! Now..i have to wait..and crossing my fingers!
Thank you all, if anybody has question ask me, i'll happy to help you
Bye
Davide
Davidenji said:
Hello, my ppc always dispays the four band with R1.11.00 written..After a lot of reset(often unplugging battery) and photo+rec, i was rarely able to display the boot option, but here is strange what is written(attached photo n°2): R None, G None, D 1.21 Michy.. Then pushing "mail" the OS start installing wm6, then, it ask me to boot so i would be able executing extrom to install cab file.It resets and then it appears the famous four band with R1.11.00
Any idea??
I've finished mine....Aww!!
Regards
Davide
P.s. think it's important: my bootloader is v 2.08
Click to expand...
Click to collapse
Nothing strange about what is in photo #2! That is the debugger screen.
Looks like you got it rolled back to the original ROM but if you decide to put the latest stable ROM 6.5 on there you're going to have to follow the Chef's directions in the above supplied link.
Good luck,
Chela
glad you found it out, you are right, there was something wrong with the radio, which is why in screenshot #1 there is only the radio listed and i think that's also why in #4 the comm icons are red, i've never seen that before, but could also be a custom skin in that rom.
brujeria is right, there is nothing wrong with the 2nd and 3rd screenshot, except for the 2nd one only showing the rom and no radio or protocol, meaning that the device was probably resetted by pulling out the battery and not pushing the reset pin with the stylus, unless that was also a radio issue.
unless you already started customizing your device you should probably think about hard resetting it once again and trying if that works, or even re-flash the rom, without flashing the radio, that way you'd know for sure, if from now on you'll always have to flash a "baked rom" (usually a term for a cooked rom, together with radio and extrom, a full flash, in this case i mean rom and radio rom, since the extrom is not really flashed anymore).
with best regards,
Chef_Tony
i've already customized...a little! Now, everytime i soft reset i read this: R 1.15.00 , G 1337.45 , D 1.21 michy.
I've no problem at moment..but i hope i won't never hard reset!
This Rom (WM6.1 included only Rom upgrade) it's nice, but i'm interested about WM6.5..anyway i think to keep this one untill a problem will come out
P.s. Like you say, now the antenna isn't red anymore..it's bright green
Thank you a lot for the support guys!