Does anybody has these settings?
thanx in advance
I don't know about WAP, but these GPRS settings work for me:
Modem > Cellular line (GPRS)
Access point name > internet.be
User name > mobistar
Password > mobistar
Under Advanced... > Servers: "Use specific server adress"
DNS > 212.65.63.10
Alt DNS > 212.65.63.145
Mobistar has two programs, one where you pay 6€ a month for 2Mb and one where you pay 15€ for 10Mb. As far as I know, only the second one works for pocket pc phones (as I discovered after months of frustration and talking to about 10 Mobistar helpdesk-guys).
Good luck...
Related
hi ,can anybody give me the gprs settings so i can use msn messenger and browse the internet,ive been told there might be a patch out there that you put in the phone and it ajusts it itself,can anyone help plx thx
There's a useful list of UK operators GPRS settings at http://www.filesaveas.com/gprs.html
or try these
How do I manually check/setup the GPRS Web settings?
Start > Settings > Connections > Connections >
Under My ISP tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: mobile.o2.co.uk
Tap Next
Username2web
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Use Specific Server Addresses should be selected
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap OK
Tap Finish
How do I manually check/setup the GPRS WAP settings?
Start > Settings > Connections > Connections >
Under My Work Network tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: wap.o2.co.uk (for Prepay enter payandgo.o2.co.uk)
Tap Next
Username2wap (for Prepay enter payandgo)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Only Use Server-assigned Address should be selected
Tap OK
Tap Finish
Tap Proxy Settings
Tap Advanced
In the WAP field enter 193.113.200.195
In the field to the right of this enter 9201
Tap OK and exit
How do I manually check/setup the MMS settings?
Start > Messaging > Tools > MMS Settings
Connect Via: My Work Network (this links to the GPRS WAP settings)
Tick Retrieve Messages Immediately
Tick OK to download when roaming
Tick Save sent messages
Attempts before give up: 3
Photo Resolution: Original
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitations: 100K
Tap OK twice to exit
How do I manually check/setup the POP3 settings?
Start > Messaging > Accounts > Accounts >
Tap the name of your email account (or tap New to setup a new account)
Email address: enter your full email address
Tap Next
Your Name: your full name (or can be anything)
User Name: your email account username (the format will differ across ISP's)
Password: your email account password
Tick Save Password
Tap Next
In the Name field you can enter a name for the account (only possible if setting up new account)
Tap Next
Incoming Mail: your ISP incoming mail server
Outgoing Mail: smtp.o2.co.uk
Leave the Domain field blank
Tap Finish
I am having problems setting up the US T-Mobile data settings. I have done search after search and come up with three .cab's that say they contain the settings:
1. T-Mobile_Network_Customizations - does not install
2. t-mobile_network_customizations_335 - does not install
3. T-MobileUStPPC - installs, but does not seem to make any changes after resetting
I even found a few threads that talk about using T-Zones for all of your connections to reduce your monthly bill.
The problem that I am having is that everything that is referenced in the phone settings does not match what I see.
When I goto:
Start / Settings / Connections ... Connections tab
I see:
My ISP
Add a new modem connection
My Work Network
Add a new modem connection
Add a new VPN server connection
Set up my proxy server
What am I missing?
Thanks for the help / flames in advance.
go over to howardforums. they have a thread all about this. You'll findit by searching.
http://www.howardforums.com/forumdisplay.php?f=324
even though I'm bored to tears here at work, I'll let you find it. Teach a man to fish sort of thing...
I use this wap setting with proxy to see real web pages
Code:
T-Mobile web/t-zones proxy
modem: cellular line gprs
Access Point Name: wap.voicestream.com
user name:
password:
domain:*
proxy settings:
proxy server: getmorespeed.voicestream.com
advanced
http: getmorespeed.voicestream.com port: 8080
WAP: wap.voicestream.com port: 9201
Secure WAP proxy: wap.voicestream.com port: 9203
Code:
To get MMS working go to Start>Messaging
Select any account then select Menu>tools>Options>Account Setup
Edit the one called Media Messages the select Menu>Edit Connections
Delete any connections you have and create this one:
CODE
Description: T-Mobile MMS
MMSC address: [url]http://216.155.174.84/servlets/mms[/url]
Data connection: MMS Network
Gateway: WAP 1.0 Gateway
IP address: 216.155.165.50
Port: 9201
GPRS Settings
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
prestonmcafee said:
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
Using just this will work sometimes.
You need to also add wap.voicestream.com and an auto picker will install and based on what you're doing, the proper data connection will be used.
prestonmcafee said:
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
This is strange I never had to use the internet2 apn. I just use the wap.voicestream.com and it works fine. Is anyone that is using both noticing any type of difference in connection?
@Peraltah
You can use either APN.
I always leave everything blank and The Edge/GPRS works all the time.
how do i ovecloked
dwny said:
Using just this will work sometimes.
You need to also add wap.voicestream.com and an auto picker will install and based on what you're doing, the proper data connection will be used.
Click to expand...
Click to collapse
i too use mda.can someone tell me how to overclocked
i used the network setup wizard that came with the c_shekhar AKU 7.0C WM 6 ROM, but however, i cannot seem to connect to GPRS to surf or SEND and RECEIVE Multimedia Messages or MMS.
Cant seem to find a patch or whatever that will make this work. My operator is SMART and Location is Philippines. Thank you for your help.
Here's what I use.Try to send me(09186326099) MMS if you succeed
GPRS Setting
1. Go to Start > Settings > Connections
2. Under My ISP choose Create a new modem connection (some may say manage proxy settings)
3. Label Server Name as: Smart GPRS
4. Connect Via: Cellular Line (GPRS)
5. Click on "Next"
6. Access Point: Internet
7. Click on "next" until you are finished
MMS Setting
1. Messages > Menu > Options
2. Choose MMS > Servers
3. Choose "New"
4. Server name: Smart MMS
5. Gateway: 10.102.61.46
6. Port Number: 9201 (note not 8080)
7. Server Address: http://10.102.61.238:8002
8. Connect Via: Smart GPRS/My ISP
9. "Ok"
10. Set Smart MMS as your default set-up for MMS
ok will try this, thnx.
I've bought a HTC S730 from expansys.co.uk and a UK O2 PAYG sim with the unlimited web bolt on, Benig a bit of an O2 & S730 novice I just assumed that all I would need to do is simply inset the sim into the handset and I would be free to browse the Internet.
Sadly that didn't work. I've tried all the known APN settings for 02, I've also contacted O2 but as they dont support the handset they couldn't help.
Does anyone here have this handset on O2 PAYG and can access the internet? What settings do I need to enter?
Regards
danb
They wouldnt help a paying customer? Thats really crappy especially since your not asking for "support" on the handset, but the network itself.
Have you used them in the past or do you have a friend with a phone on their network? You should only really need the GPRS configuration stuff to get it connected to their network.
I am not familier with O2 at all but I hope that the following helps, it was what I came up with.
O2 GPRS settings (WAP):
Homepage: http://wap.o2.co.uk/
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : payandgo
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Port number: 9201
O2 GPRS settings (Email/Web):
Homepage: http://pda.o2.co.uk/
APN address: mobile.o2.co.uk
Username: mobileweb
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Email servers (POP): mail.o2.co.uk
Email servers (SMTP): smtp.o2.co.uk
DNS Servers: 193.113.200.200 and 193.113.200.201
Key that in under Settings > Connections > GPRS > (Either make a new one or edit an existing one (for each I believe)...)
10332007 said:
They wouldnt help a paying customer? Thats really crappy especially since your not asking for "support" on the handset, but the network itself.
Have you used them in the past or do you have a friend with a phone on their network? You should only really need the GPRS configuration stuff to get it connected to their network.
I am not familier with O2 at all but I hope that the following helps, it was what I came up with.
O2 GPRS settings (WAP):
Homepage: http://wap.o2.co.uk/
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : payandgo
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Port number: 9201
O2 GPRS settings (Email/Web):
Homepage: http://pda.o2.co.uk/
APN address: mobile.o2.co.uk
Username: mobileweb
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Email servers (POP): mail.o2.co.uk
Email servers (SMTP): smtp.o2.co.uk
DNS Servers: 193.113.200.200 and 193.113.200.201
Key that in under Settings > Connections > GPRS > (Either make a new one or edit an existing one (for each I believe)...)
Click to expand...
Click to collapse
Thanks man,
This is the settings for contract sims, either way i've tried it, I found all the APN setting on line, but my problem is that I cant get it to work on this handset.
Does anyone use ON PAYG with HTC's Wings?
Regards
Dan
only other thing I can suggest is are you sure your account has access to the GPRS networks with a data plan or are you trying to see if they will dock minutes / charge you per KB... Hope you get it fixed
sorry if this has been asked a million times before i have been searching for two days trying to get the internet to work on ya sons touch diamond
this phone was on contract on o2 he is now trying to set it up on his pay and go simplisty sim which includes free internet .
I have tryed so many different settings to get the internet working and email
all i get are network error messages.
the only way i can get it to conect is via wifi
and help would be great thanks in advance
Gary
Theres a cab file with the settings in. I cant remember where i got it from, but if you PM your e-mail address i will mail it to you.
I think its called DeploySP.cab
Hi, I'm on the same network and on the Text and Web simplicity tariff. Here is what I did. The Windows mobile version I'm using is wm6.5.x, with the start menu at the bottom left.
To enter the settings first click "start", then click "setting", then "connections".
First click manage existing connections, and delete the modem connection specified in here. (Not required but advised) As this is configured by the device and the setting are incorrect.
Next go back a step. Then click add new modem connection.
“Select a Modem” should be set for “Cellular Line (GPRS)” or “Cellular Line GPRS/3G”
Now click “Next” to start inputting the operator specific settings.
Name the connection: O2 (PAYG)
Access Point Name (PAYG): payandgo.o2.co.uk
Username (PAYG) payandgo
Password: password
Tap “Advanced” and make sure both tabs have selected “Use Server Assigned IP Address”
Tap “Finish” then Tap “Proxy Settings”.
Select “This network connects to the Internet” and “ This network connects to a proxy server…”
Tap “Advanced” then WAP. Server address is: 193.113.200.195: Port 9201. Tap OK
Tap Socks: Server is 193.113.200.195: Port 1080. Type: Socks 4.
I can confirm these settings work as I use the internet everyday on my Touch Pro. Hope this helps. If you struggle pm me.
Hello sb.oddworld,
Working on HTC Kaiser on O2
Many thanks,
SW ;o)