Database Develop

GPRS Setup for O2 Ireland

Hi there,
I have the Qtek 9090 with an O2 pay as you go sim. O2 said that the sim card should work.
Go to Start > Settings > Connections Tab > Add a new modem connection.
Enter the following settings:
Enter a name for the connection: o2 gprs web
Select a modem: Cellular line (GPRS)
Press Next button
Access point name: internet (contract) / pp.internet (speakeasy) *
Press Next button
Username: gprs
Password: gprs
Domain: leave blank
Press Advanced button, leave first page as is. Press the Servers tab, tick the option "Use specific server address" and enter the following:
DNS: 62.40.32.33
Alt DNS: 62.40.32.34
WINS: leave blank
Alts WINS: leave blank
Press Ok then Finish
still get the following Error message:
cannot connect for unknown reason. to check your connection settings and change them if needed, tap settings.........if problem continues reset your devive according to manufacture documentation.
Please help! Thanks

Connecting to O2 GPRS service

I had trouble connecting to O2's GPRS service using information from various places. I contacted O2 who did not know (apparantly) that the Qtek 2020 _is_ an XDA. :idea: I convinced them it was and then they gave me the settings as follows > THANKS O2!!
We have the GPRS WAP settings for the O2 XDA®, which I have listed below:
Please make sure that when entering 'O2' into the settings, the letter 'O' is selected and not a zero.
Tap Start
Tap Settings
Tap the Connections tab
Tap the Connections icon
Under 'Internet Settings' drop-down box should be set 'New'
Rename 'My Connection' to 'GPRS Pre Pay'
Tap 'Modem' tab
Tap 'New...'
Rename 'My Connection' to 'GPRS Pre Pay'
The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
Tap 'Advanced'
On the 'TCP/IP' tab, only 'Use server-assigned IP address' should be selected
Tap the 'Name Servers' tab
Only 'Use server-assigned addresses' should be selected
Tap 'OK'
Tap 'Next'
Access Point Name: payandgo.o2.co.uk
Tap 'Finish'
Tap 'Proxy Settings' tab (*Note, the soft keyboard may be hiding this tab - tap the keyboard icon at bottom right to clear this away)
Ensure that 'This network connects to the Internet' box is ticked
Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
Tap 'Advanced'
In the 'HTTP' field (Server) enter: 193.113.200.195
In the field to the right of this (Port) enter: 8080
Tap 'OK' four times to exit
Please note that we do not guarantee that the O2 XDA® settings will work for your phone. Your account is enabled with GPRS. As your phone is not accredited to our network, we are unable to help you. Please contact your phone manufacturer for further help.
Click to expand...
Click to collapse
Hope this might be usefull!
john./

the Access Point Name payandgo.o2.co.uk is only for the Pay As You Go customers; Pay Monthly customers just use mobile.o2.co.uk for Mobile Web and wap.o2.co.uk for O2 Active (GPRS over WAP).
More details: http://www.filesaveas.com/gprs.html

GPRS Issues with WM6

i used the network setup wizard that came with the c_shekhar AKU 7.0C WM 6 ROM, but however, i cannot seem to connect to GPRS to surf or SEND and RECEIVE Multimedia Messages or MMS.
Cant seem to find a patch or whatever that will make this work. My operator is SMART and Location is Philippines. Thank you for your help.

Here's what I use.Try to send me(09186326099) MMS if you succeed
GPRS Setting
1. Go to Start > Settings > Connections
2. Under My ISP choose Create a new modem connection (some may say manage proxy settings)
3. Label Server Name as: Smart GPRS
4. Connect Via: Cellular Line (GPRS)
5. Click on "Next"
6. Access Point: Internet
7. Click on "next" until you are finished
MMS Setting
1. Messages > Menu > Options
2. Choose MMS > Servers
3. Choose "New"
4. Server name: Smart MMS
5. Gateway: 10.102.61.46
6. Port Number: 9201 (note not 8080)
7. Server Address: http://10.102.61.238:8002
8. Connect Via: Smart GPRS/My ISP
9. "Ok"
10. Set Smart MMS as your default set-up for MMS

ok will try this, thnx.

Internet Connection issues have searched/read faq

I recently flashed to this dutty release. I'm using the 1.27.12.17 Radio on ATT 's network.
For some reason I cannot connect to the internet using internet explorer.
I am able to send and recieve emails with blackberry connect, and I get the weather updates through the weather plugin. When I try to use IE, it never navigates away from the dutty start page.
I have run the connection setup program and I have also tried the following manual steps. Neither seems to work. Any advice would be welcomed.
tap start
tap settings
tap connections tab
tap connections
tap set up my proxy server
uncheck this network uses a proxy server to connect to the internet
leave this network connects to the internet checked
tap ok
tap advanced tab
tap select networks
both should be set to medianet
tap edit on the top/bottom (both are the same settings
tap edit... again
tap next
enter wap.cingular
username [email protected]
password CINGULAR1
tap finish
ok out of all screens
soft reset by pushing the reset button to the top right of the usb port with your stylus.
I've also tried:
To get to the connection settings:
Start Menu/Settings/Connections/advanced/select networks/click "new" if media net isn't there or click edit if media net is there/ fill in these settings:
MEdia Net:
General: MEdia Net
Modem:Edit(MEdia Net)/New(Create Media Net):
Name: MEdia Net
Modem:Cellular Line (GPRS , 3G)
Hit next
Access Point name: wap.cingular
Hit next
Leave first three fields empty(if you know what to put put in but it doesn't really matter)
Hit advanced
Select Use server assigned IP address
Select Use IP Header compression
Servers:
Select Use server assigned address
HIT OK
Hit finished
Proxy Settings:
Select This network connects to the Internet
Select This network uses a proxy server. . . .
Proxy Server: wireless.cingular.com
Hit advanced
Hit HTTP
Port:80
Hit ok
Hit Socks
Server: localhost
Port: 1080
Hit ok
AT&T ISP:
General:AT&T ISP
Modem:Edit(Edit My ISP*Change name to AT&T ISP GPRS*/New(Create AT&T ISP GPRS):
Name: AT&T GPRS
Modem:Cellular Line (GPRS , 3G)
Hit next
Hit next
Access Point name: isp.cingular
Hit next
Leave first three fields empty(if you know what to put put in but it doesn't really matter)
Hit Finish
Hit ok
Lastly, i've tried using Opera Mobile 4 from a har install through Active Sync. none of these methods work.
Any ideas?

Problem with proxy trick

my t-zone was working fine till like last week. Also before when i used to turn on my fone the Data connected, the MMS connected, and the WModen Link connected, but now only the Data connects, and sometimes the data doesnt connect and the other two connect. If i manually connect to MMS first then WModem Link also connects. But if i try to connect the Data first then the other two wont connect. And with the MMS connected i wont recieve any text messages, WTF somebody help
this is my setting
T-ZONES PROXY SETUP
Start Menu
Click Settings
Select Connections Tab
Select Connections (on the page)
Select "Set up my proxy server"
Select Proxy Settings (tab at bottom)
Put in checkmarks for both "This network connects to the internet" AND "This network uses a Proxy server to connect to the Internet"
In the proxy server box enter: 216.155.165.50
Click on Advanced
Tap HTTP
Change the server setting to: 216.155.165.50
Changer the port setting to 8080
Username: leave blank
Password: leave blank
Domain: leave blank
Tap "OK" in the upper right corner
Tap Socks
Change the server setting to: 216.155.165.50
Changer the port setting to 1080<<<< MAKE SURE this is 1080 NOT 8080
Type: Socks 4
Username: leave blank
Password: leave blank
Domain: leave blank
Tap OK
Tap Ok
MMS Setup
Start >> Messaging >> MMS >> Menu >> Tools >> Options >> MMS >> Servers >> T-Mobile MMS
Server Name: T-Mobile MMS
Gateway: 216.155.165.50
Port number: 8080
Server address: "http://216.155.174.84/servlets/mms" <<< without the quotes
Connect via: T-Mobile Data
Sending size limit: 300k
Wap Version: WAP 2.0
Select OK
Select OK
Select OK
Now send yourself an MMS

can't help u on the mms but as far as the web proxy is concerned, make sure you have the correct networks selected for applications to access the net.
Start > Settings > Connections > Connections > Advanced (tab at bottom) > "Select Networks"
The network i use is called "Tmobile Data" so i just make sure that is the network i have selected and not 'my work network' or 'my isp'