Connecting to O2 GPRS service - PDA2, XDA IIi, 2020i General

I had trouble connecting to O2's GPRS service using information from various places. I contacted O2 who did not know (apparantly) that the Qtek 2020 _is_ an XDA. :idea: I convinced them it was and then they gave me the settings as follows > THANKS O2!!
We have the GPRS WAP settings for the O2 XDA®, which I have listed below:
Please make sure that when entering 'O2' into the settings, the letter 'O' is selected and not a zero.
Tap Start
Tap Settings
Tap the Connections tab
Tap the Connections icon
Under 'Internet Settings' drop-down box should be set 'New'
Rename 'My Connection' to 'GPRS Pre Pay'
Tap 'Modem' tab
Tap 'New...'
Rename 'My Connection' to 'GPRS Pre Pay'
The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
Tap 'Advanced'
On the 'TCP/IP' tab, only 'Use server-assigned IP address' should be selected
Tap the 'Name Servers' tab
Only 'Use server-assigned addresses' should be selected
Tap 'OK'
Tap 'Next'
Access Point Name: payandgo.o2.co.uk
Tap 'Finish'
Tap 'Proxy Settings' tab (*Note, the soft keyboard may be hiding this tab - tap the keyboard icon at bottom right to clear this away)
Ensure that 'This network connects to the Internet' box is ticked
Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
Tap 'Advanced'
In the 'HTTP' field (Server) enter: 193.113.200.195
In the field to the right of this (Port) enter: 8080
Tap 'OK' four times to exit
Please note that we do not guarantee that the O2 XDA® settings will work for your phone. Your account is enabled with GPRS. As your phone is not accredited to our network, we are unable to help you. Please contact your phone manufacturer for further help.
Click to expand...
Click to collapse
Hope this might be usefull!
john./

the Access Point Name payandgo.o2.co.uk is only for the Pay As You Go customers; Pay Monthly customers just use mobile.o2.co.uk for Mobile Web and wap.o2.co.uk for O2 Active (GPRS over WAP).
More details: http://www.filesaveas.com/gprs.html

Related

gprs settings for a xda2i

hi ,can anybody give me the gprs settings so i can use msn messenger and browse the internet,ive been told there might be a patch out there that you put in the phone and it ajusts it itself,can anyone help plx thx
There's a useful list of UK operators GPRS settings at http://www.filesaveas.com/gprs.html
or try these
How do I manually check/setup the GPRS Web settings?
Start > Settings > Connections > Connections >
Under My ISP tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: mobile.o2.co.uk
Tap Next
Username2web
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Use Specific Server Addresses should be selected
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap OK
Tap Finish
How do I manually check/setup the GPRS WAP settings?
Start > Settings > Connections > Connections >
Under My Work Network tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: wap.o2.co.uk (for Prepay enter payandgo.o2.co.uk)
Tap Next
Username2wap (for Prepay enter payandgo)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Only Use Server-assigned Address should be selected
Tap OK
Tap Finish
Tap Proxy Settings
Tap Advanced
In the WAP field enter 193.113.200.195
In the field to the right of this enter 9201
Tap OK and exit
How do I manually check/setup the MMS settings?
Start > Messaging > Tools > MMS Settings
Connect Via: My Work Network (this links to the GPRS WAP settings)
Tick Retrieve Messages Immediately
Tick OK to download when roaming
Tick Save sent messages
Attempts before give up: 3
Photo Resolution: Original
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitations: 100K
Tap OK twice to exit
How do I manually check/setup the POP3 settings?
Start > Messaging > Accounts > Accounts >
Tap the name of your email account (or tap New to setup a new account)
Email address: enter your full email address
Tap Next
Your Name: your full name (or can be anything)
User Name: your email account username (the format will differ across ISP's)
Password: your email account password
Tick Save Password
Tap Next
In the Name field you can enter a name for the account (only possible if setting up new account)
Tap Next
Incoming Mail: your ISP incoming mail server
Outgoing Mail: smtp.o2.co.uk
Leave the Domain field blank
Tap Finish

GPRS Setup for O2 Ireland

Hi there,
I have the Qtek 9090 with an O2 pay as you go sim. O2 said that the sim card should work.
Go to Start > Settings > Connections Tab > Add a new modem connection.
Enter the following settings:
Enter a name for the connection: o2 gprs web
Select a modem: Cellular line (GPRS)
Press Next button
Access point name: internet (contract) / pp.internet (speakeasy) *
Press Next button
Username: gprs
Password: gprs
Domain: leave blank
Press Advanced button, leave first page as is. Press the Servers tab, tick the option "Use specific server address" and enter the following:
DNS: 62.40.32.33
Alt DNS: 62.40.32.34
WINS: leave blank
Alts WINS: leave blank
Press Ok then Finish
still get the following Error message:
cannot connect for unknown reason. to check your connection settings and change them if needed, tap settings.........if problem continues reset your devive according to manufacture documentation.
Please help! Thanks

Internet Connection issues have searched/read faq

I recently flashed to this dutty release. I'm using the 1.27.12.17 Radio on ATT 's network.
For some reason I cannot connect to the internet using internet explorer.
I am able to send and recieve emails with blackberry connect, and I get the weather updates through the weather plugin. When I try to use IE, it never navigates away from the dutty start page.
I have run the connection setup program and I have also tried the following manual steps. Neither seems to work. Any advice would be welcomed.
tap start
tap settings
tap connections tab
tap connections
tap set up my proxy server
uncheck this network uses a proxy server to connect to the internet
leave this network connects to the internet checked
tap ok
tap advanced tab
tap select networks
both should be set to medianet
tap edit on the top/bottom (both are the same settings
tap edit... again
tap next
enter wap.cingular
username [email protected]
password CINGULAR1
tap finish
ok out of all screens
soft reset by pushing the reset button to the top right of the usb port with your stylus.
I've also tried:
To get to the connection settings:
Start Menu/Settings/Connections/advanced/select networks/click "new" if media net isn't there or click edit if media net is there/ fill in these settings:
MEdia Net:
General: MEdia Net
Modem:Edit(MEdia Net)/New(Create Media Net):
Name: MEdia Net
Modem:Cellular Line (GPRS , 3G)
Hit next
Access Point name: wap.cingular
Hit next
Leave first three fields empty(if you know what to put put in but it doesn't really matter)
Hit advanced
Select Use server assigned IP address
Select Use IP Header compression
Servers:
Select Use server assigned address
HIT OK
Hit finished
Proxy Settings:
Select This network connects to the Internet
Select This network uses a proxy server. . . .
Proxy Server: wireless.cingular.com
Hit advanced
Hit HTTP
Port:80
Hit ok
Hit Socks
Server: localhost
Port: 1080
Hit ok
AT&T ISP:
General:AT&T ISP
Modem:Edit(Edit My ISP*Change name to AT&T ISP GPRS*/New(Create AT&T ISP GPRS):
Name: AT&T GPRS
Modem:Cellular Line (GPRS , 3G)
Hit next
Hit next
Access Point name: isp.cingular
Hit next
Leave first three fields empty(if you know what to put put in but it doesn't really matter)
Hit Finish
Hit ok
Lastly, i've tried using Opera Mobile 4 from a har install through Active Sync. none of these methods work.
Any ideas?

Email set up problems with Telstra (AUS)

I have just upgraded from a DIAM 100 to a 130 so now 3G works beautifully.
However my mail set up fails to synchronise (both bigpond and windows live).
It will work on wifi but will not work otherwise (full 5 bars reception and internet does work.)
I figured it must be the settings for my telstra internet/wap setting however when i go into connections, it tells me that this is preconfigured and cannot be modified.
So has anyone else had this problem and how did you fix it.
I have wasted several hours of on hold to Telstra so I thought I would ask this forum first.
I have searched the fora without success for this problem.
Many thanks
thedoc said:
I have just upgraded from a DIAM 100 to a 130 so now 3G works beautifully.
However my mail set up fails to synchronise (both bigpond and windows live).
It will work on wifi but will not work otherwise (full 5 bars reception and internet does work.)
I figured it must be the settings for my telstra internet/wap setting however when i go into connections, it tells me that this is preconfigured and cannot be modified.
So has anyone else had this problem and how did you fix it.
I have wasted several hours of on hold to Telstra so I thought I would ask this forum first.
I have searched the fora without success for this problem.
Many thanks
Click to expand...
Click to collapse
Flexmail for the win!
I have exactly the same problem. I'm assuming the Teltra ROM is locked down and you can't do much with it.
The problem is the proxy settings, don't enter them and you will be able to use msn and email, but you will loose access to the "free to browse" Telstra pages
Copied from http://configure.telstra.com.au
1. On the handset, tap on the Start button.
2. Tap on Settings.
3. Tap on Connections tab.
4. Tap on Connections icon.
5. Tap on Add a new modem connection under My Work Network.
6. Enter Telstra Internet in the Enter a name for the connection field.
7. Select Cellular Line (GPRS, 3G) in the drop down list under Select a modem.
8. Tap on Next.
9. Enter telstra.wap in the Access point name field.
10. Tap on Next.
11. Enter a username in the User name field or otherwise leave it blank.
12. Enter a password in the Password field or otherwise leave it blank.
13. Tap on Advanced.
14. Select Use server-assigned IP address.
15. Tap on OK.
16. Tap on Finish.
17. Tap on Set up my proxy server under My Work Network.
18. Make sure that This network connects to the Internet and This network uses a proxy server to connect to the Internet are checked.
19. Tap on Advanced.
20. Tap on HTTP.
21. Enter 10.1.1.181 in the Server field.
22. Enter 80 in the Port field.
23. Tap on OK three times.
Fix in Advanced Server Settings
I had this problem and fixed pretty easily by going into email inbox tab, then press menu / tools / options then tap an account to change its settings. click 'edit account setup' press next a couple times until you get to a page with "Advanced Server Settings" down the bottom in blue. click on that and change the network connection box from 'The internet' to telstra internet. click done and next til the setup is finished and you should be able to get your mail over the 3G connection

o2 pay as you go setting help plz

sorry if this has been asked a million times before i have been searching for two days trying to get the internet to work on ya sons touch diamond
this phone was on contract on o2 he is now trying to set it up on his pay and go simplisty sim which includes free internet .
I have tryed so many different settings to get the internet working and email
all i get are network error messages.
the only way i can get it to conect is via wifi
and help would be great thanks in advance
Gary
Theres a cab file with the settings in. I cant remember where i got it from, but if you PM your e-mail address i will mail it to you.
I think its called DeploySP.cab
Hi, I'm on the same network and on the Text and Web simplicity tariff. Here is what I did. The Windows mobile version I'm using is wm6.5.x, with the start menu at the bottom left.
To enter the settings first click "start", then click "setting", then "connections".
First click manage existing connections, and delete the modem connection specified in here. (Not required but advised) As this is configured by the device and the setting are incorrect.
Next go back a step. Then click add new modem connection.
“Select a Modem” should be set for “Cellular Line (GPRS)” or “Cellular Line GPRS/3G”
Now click “Next” to start inputting the operator specific settings.
Name the connection: O2 (PAYG)
Access Point Name (PAYG): payandgo.o2.co.uk
Username (PAYG) payandgo
Password: password
Tap “Advanced” and make sure both tabs have selected “Use Server Assigned IP Address”
Tap “Finish” then Tap “Proxy Settings”.
Select “This network connects to the Internet” and “ This network connects to a proxy server…”
Tap “Advanced” then WAP. Server address is: 193.113.200.195: Port 9201. Tap OK
Tap Socks: Server is 193.113.200.195: Port 1080. Type: Socks 4.
I can confirm these settings work as I use the internet everyday on my Touch Pro. Hope this helps. If you struggle pm me.
Hello sb.oddworld,
Working on HTC Kaiser on O2
Many thanks,
SW ;o)

Categories

Resources