Related
Hi all,
i have had my Alpine opened from o2 and its now on Tmobile. I am trying to connect to the net via wap or gprs yet it tries to connect then tells me the following
The answering modem has disconnected. To check your connection settings and chenge them if needed, tap settings.
Ive no idea what im doing
Any help in plain English please.
Thank You so much
Hi Cheryl, XDA-IIi (Alpine) is an O2 device and the default setting for everything would be on O2 network, if you are using T-Mobile on that then you need to create the settings of GPRS & Wap from T-mobile, I have attached the CAB file for UK-T-mobile just put in your device and run, but try to delete the previous connection settings of O2 if you haven't got any plans to use them in the future.
By the way have you solved your TomTom hanging/stucking problem yet?
http://forum.xda-developers.com/showthread.php?t=286020
GoodLuck
Sidd
Thank you Sid
Sid
You are so helpfull, thank you for your help.
One last question and i will stop bothering you. I have followed your screen prompts and deleted all connections, where to i place the new tmobile file, memorycard or in another file
Once again thank you
Cheryl
Just put anywhere on the device and click to run, once it finish installing it will dissappear itself.
GoodLuck
Sidd
im thick i know
Sorry Sid,
Maybe im too thick to own one of these, its attack of the blonde i think.
I sent the file to my XDA and put it in My Documents, i then came to open it and got the following
"The file \My Documents\UK_T-Mobile.CAB is not a valid windows CE Setup file"
Any ideas
Sorry to be a pain
Cheryl
T-Mobile GPRS setup
This is how I setup my US t-mobile GPRS connection on my device.
- Start Menu/Settings/Connections Tab/Connections icon.
- Select Add a new modem connection.
- Enter the name (e.g tmobile)
- Select "cellular Line (GPRS) as modem
- Click on next and enter "wap.voicestream.com" for access point name.
- Click on next and leave username/password/domain blank.
- Click on finish. (The advanced setting should be set to user server-assign IP and DNS.
Good lucks.
Cheryl dont worry and dont think that you can not handle this device its one of the nicest device ever merketed and you can play with this device allot accept you can not install Windows 2005 in this, such a pitty.
Ok try these settings step by step, please dont be hurry, be calm and try them. Let me know (by-the-way have a look on my XDA-IIi)
**************************************
Go to: Start>Settings>Connections tab
Select: Connections
Select: Advance tab
Select: Select Networks button
Select New... button under the first dropdown
On the General tab
Name: T-Mobile WAP (or whatever you want to call it)
On the Modem tab
Select: New... button
Connection Name: WAP
Modem: Cellular Line (GPRS)
Select: Next button
Access Point Name: wap.voicestream.com
Select: Next button
Select: Finish button
Be sure to reselect your previously working GRPS connects in both the dropdowns if they are changed to the new WAP ones. The new ones will only be used by your MMS application.
Select: OK and close the settings
Next we setup the MMS Application to use the new WAP connection we just created.
Select: Start>Messaging
Select: Tools menu at the bottom of the screen
Select: MMS Settings...
On the Preferences tab
Connect via: T-Mobile WAP (or whatever you called it in the previous setup)
On the Servers tab
Select: New button
Server Name: T-Mobile USA
Gateway: 216.155.165.50
Port Number: 9201
Server address: http://216.155.174.84/servlets/mms
Size: 250k (you might set this smaller)
Select: OK
Select the T-Mobile USA entry and set is as default by pressing the Set As Default button
Select: OK
********************************************************
GoodLuck
Sidd
Did anyone successfully get T-MobileWeb to work on the Tilt to get internet access? I am able to send/receive email but cannot get PIE to connect tot he internet. I've setup the usual T-Mo proxy setting but is there another proxy in PIE somewhere? Is it an issue with PIE connecting through a WAP port?
Thanks.
__________________
I think therefore I am.... confused!!!
you need to search forums for tilt tmobile, thats what i had to do..how are your MMS working out... i cant get mine to work after i changed my proxy to get the $5.99 hack... i am thinking i might have to get the data plan.. let me know if you get it working...
these are the settings i am using;
Under Modem,Edit, needs to be wap.voicestream.com
under Proxy the setting needs to be, see below;
This network connects to internet, network uses a proxy server to connect, box need to be checked.. 216.155.165.50, then under advance
216.155.165.50 port:8080
216.155.165.50 port:1901
216.155.165.50 port:1901 or 03 worked for me
sockets, need to be blank
guys, i was able to get both working, however, not on the stock at&t tilt rom. first to get the mms working, i just went to settings-connections-connection setup, and let it setup ur settings for tmobile usa. this will not allow your mms to work. now go to the connections and modify the settings for the 5.99 plan (i posted the exact settings a while back, search for it).. all u pretty much gotta do is add the proxy. good luck
omar
ps..if ur using the tilt rom, i never got the mms working, and wasnt able to access the internet on the 5.99 plan. on the 19.99 plan worked fine tho
omaralt said:
guys, i was able to get both working, however, not on the stock at&t tilt rom. first to get the mms working, i just went to settings-connections-connection setup, and let it setup ur settings for tmobile usa. this will not allow your mms to work. now go to the connections and modify the settings for the 5.99 plan (i posted the exact settings a while back, search for it).. all u pretty much gotta do is add the proxy. good luck
omar
ps..if ur using the tilt rom, i never got the mms working, and wasnt able to access the internet on the 5.99 plan. on the 19.99 plan worked fine tho
Click to expand...
Click to collapse
Here's the setting:
5.99
start
settings
connections
connections
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :216.155.165.50
click advanced
http: 216.155.165.50:8080
wap: 216.155.165.50:9201
secure wap: 216.155.165.50:9201
socks (blank)
under modem, your access point name should be : wap.voicestream.com
name and password blank.
under advanced check use server assigned ip address
use software compression
use ip header compression.
T-Mobile Total Internet
The only differences is instead of wap.voicestream.com, its:
internet2.voicestream.com or internet3.voicestream.com
And instead of ports 9201 its 9203.
i did try those settings...(that is what they are set to now) my internet has no problems, but my MMS does not... so i cant understand the prob!
I've tried all the settings provided by we3zy but still can't get it to work. In PIE, it kept on saying "opening..." and then came back with the following error:
Error 502 - Bad Request
The server could not resolve your request for url: /
Any thoughts?
- Thanks.
OK, got it to work with accessing internet and email by adding a modem setting. However, I have to switch the two connections depending on which function I need.
Under Setting, Connections, Advanced button, Select Networks...I need to do the following:
In the Network Management screen I have a few choices but only the two settings in the top choice (Programs that automatically connect to the internet should connect using: ) need switching. When I click on to select the choices, I have setup one for accessing the internet and another to get email.
Is this normal or am I the only one that have this issue? Its kind of annoying to keep on switching the setting for the functions. Any way to combine the two connections or have the device auto choose and connect automatically?
we3zy said:
Here's the setting:
5.99
start
settings
connections
connections
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :216.155.165.50
click advanced
http: 216.155.165.50:8080
wap: 216.155.165.50:9201
secure wap: 216.155.165.50:9201
socks (blank)
under modem, your access point name should be : wap.voicestream.com
name and password blank.
under advanced check use server assigned ip address
use software compression
use ip header compression.
T-Mobile Total Internet
The only differences is instead of wap.voicestream.com, its:
internet2.voicestream.com or internet3.voicestream.com
And instead of ports 9201 its 9203.
Click to expand...
Click to collapse
I used the 5.99 setting and this is exactly what my explorer's (PIE, Opera and email also says cant connect using this connection say.
"Error: Requested content 'www.google.com/m' cannot be accessed. You do not have access to the site. "
moddin said:
I used the 5.99 setting and this is exactly what my explorer's (PIE, Opera and email also says cant connect using this connection say.
"Error: Requested content 'www.google.com/m' cannot be accessed. You do not have access to the site. "
Click to expand...
Click to collapse
I really can't explain why your getting that problem. But visit www.yahoo.com and then visit google.com again. I had that problem on the iphone, don't know why.
Make sure you've checked:
use software compression
use ip header compression.
and all ports are 9201
the settings above worked to get ny internet browser up i am currently on google with the original at&t rom now im gonna check my emails and weather plug ins
we3zy said:
I really can't explain why your getting that problem. But visit www.yahoo.com and then visit google.com again. I had that problem on the iphone, don't know why.
Make sure you've checked:
use software compression
use ip header compression.
and all ports are 9201
Click to expand...
Click to collapse
They are all checked. I changed all ports to 9201 even the http and now when i open pie it says
"You do not have access rights to this site
URL=www.google.com/
Status=20(hex)"
Also it adds "wsp://" in front of any link i type in the browser. Maybe you didnt mean change the http port to 9201 but i gave it a shot. are you guys and XXwindowsXX using the 5.99 deal? and it works?
email routing issue + cannot download TM's w/ pics
Hi All ~~
It sounds like I may have found the right msg board! I am a T-Mobile customer using an unlocked AT&T phone with the original ROM (minus the bloatware). I currently have three msging accounts on the Tilt: text msging, a hotmail account and a work email account (which I check via Outlook on my PC). I am having two annoying problems:
(1) I keep getting TMs saying that I have received an email on my work account; however I cannot (a) get the text msg notifications to turn off, nor (b) get the emails to actually pull down into the account. So: I know I have a work email (even who from), but cannot read it. Any thoughts on how to resolve either or both of these issues?
(2) I cannot receive or send pic text msgs. Really annoying; I am curious to see how other T-Mobile Tilt users have their settings arranged for this.
Thank you in advance for any assistance you can provide ~~ Kim
TYTN/Hermes settings?
These settings in post four, would they be the same for the HTC TYTN/Hermes as well? After going into cnections, I notice that there isn't anything called connection settings. Just add new modem conection, proxy settings etc. I'd really like to be able to get this T-Zones up and running on my Hermes as well.
Thanks,
Cristobal
Cristobalm said:
These settings in post four, would they be the same for the HTC TYTN/Hermes as well? After going into cnections, I notice that there isn't anything called connection settings. Just add new modem conection, proxy settings etc. I'd really like to be able to get this T-Zones up and running on my Hermes as well.
Thanks,
Cristobal
Click to expand...
Click to collapse
Yes, it should be. You'll need to add a new modem connection and edit the proxy settings. PM me if you can't get it to work and I'll try to help you.
Tilt Solution To Force Http Instead Of Wsp On Tmobile
Our good friends at ATT have two cab files in the \windows folder which install and remove a hidden proxy. By default, it funnels through the proxy.
BAD ATT!
If you are using T-mobile's 5.99 gprs plan and the HIDDEN proxy is enabled, all traffic will be routed through the hidden proxy and you will be forced to WSP:// pages. This will effectively lock you out of many of the sites that do not support the WSP protocol. Other carriers (Orange?) may be doing this too to drive WSP traffic.
To correct the problem, go to the windows folder and
1. run the restoreHiddenProxy4CWS_0522.cab
2. and then run the removeHiddenProxy4CWS_0522.cab file
3. Close your data connection and restart it. If you don't know how, just press the reset button.
After this is complete install the standard T-mobile GPRS settings and you should be in good shape. If you need a cab for t-mobile, search the board for the most current one or PM me. I keep one handy too.
liquidsilver said:
Our good friends at ATT have two cab files in the \windows folder which install and remove a hidden proxy. By default, it funnels through the proxy.
BAD ATT!
If you are using T-mobile's 5.99 gprs plan and the HIDDEN proxy is enabled, all traffic will be routed through the hidden proxy and you will be forced to WSP:// pages. This will effectively lock you out of many of the sites that do not support the WSP protocol. Other carriers (Orange?) may be doing this too to drive WSP traffic.
To correct the problem, go to the windows folder and
1. run the restoreHiddenProxy4CWS_0522.cab
2. and then run the removeHiddenProxy4CWS_0522.cab file
3. Close your data connection and restart it. If you don't know how, just press the reset button.
After this is complete install the standard T-mobile GPRS settings and you should be in good shape. If you need a cab for t-mobile, search the board for the most current one or PM me. I keep one handy too.
Click to expand...
Click to collapse
So after doing that, will I be able to browse regular HTML pages (without going through proxies) using the 5.99 plan ?
i have a ty tn II and t-mobile is my carrier and i have the 19.99 internet plan,so i would like to know what are the correct settings for the MMS cause i cant sent picture messages nor recieve them..please help me thanks
tm1125 said:
i have a ty tn II and t-mobile is my carrier and i have the 19.99 internet plan,so i would like to know what are the correct settings for the MMS cause i cant sent picture messages nor recieve them..please help me thanks
Click to expand...
Click to collapse
try this:
server name: call it whatever you want
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: whatever you called the server name
Sending limit: 300k
WAP version: WAP 2.0
make sure you set this MMS server as default
The 5.99 plan requires a proxy. No exceptions that I'm aware of. The good news is that I've not found a page that I cannot browse. The speed isn't stellar, but quite acceptable. Additionally, since the power requirements for GPRS are low, I check email every 10 minutes.
There are a series of CAB files floating around here somewhere that have all the correct settings for each of the Tmo plans.
Same phone also ulocked for T-mobile Final solution
I suggest that you start afresh (Hard reset your phone)
then go to this link and download the cab
http://forum.xda-developers.com/showpost.php?p=1521768&postcount=70
download this cab
tmobyjoe599.cab
I had the same problem as you but that worked for me and im sure it will work for you.
Oh before i forget make sure that you disable automatic wireless configurator, that stuff is crap.
p.s note to be a pain in the ass. Next time search the forum even google will lead you to the answer of your question.
OK, my 8525 used to do this very well. I just got a tilt and installed several roms and they all did the same thing (duty, ATT org., and DCS) when I setup an email for a yahoo account and try to sync it says it cannot connect under these settings. But they are the default settings for att. I also checked with att and my settings are all correct. I was using the 1.58 radio now I'm starting to use 1.64 to see if that works any better. I don't know if this is a radio issue or whatever but I really need help att support isn't doing anything so I'm turning to you guys. (btw I've reset everything many many times getting the same error too)
xcom923 said:
OK, my 8525 used to do this very well. I just got a tilt and installed several roms and they all did the same thing (duty, ATT org., and DCS) when I setup an email for a yahoo account and try to sync it says it cannot connect under these settings. But they are the default settings for att. I also checked with att and my settings are all correct. I was using the 1.58 radio now I'm starting to use 1.64 to see if that works any better. I don't know if this is a radio issue or whatever but I really need help att support isn't doing anything so I'm turning to you guys. (btw I've reset everything many many times getting the same error too)
Click to expand...
Click to collapse
Did you not learn anything from your 8525....?
You need to provide more info if you want help.
Start by creating a signature summarizing your device's set up.
Default is not always default....keep this in mind!
I don't know what data plan you have but I'll start with this:
Start > Setting > Connection > Connection > Advanced > Select Networks > In the Drop down box...you probably have Media Net, Try ATT Wap or vice versa.
This all I can do for you because you failed to provide more info. Based on the radios you've tried, I'm assuming you're on WM 6.1. Also, you need to address this issue in the thread of the Rom you're using.
You've said also that this issue repeats on several Roms.....What are you using to configure your Network settings?
Either Network Config or your cab file is not working properly you. You may have to manually input your settings. They are located around here somewhere or google it.
dwny said:
Did you not learn anything from your 8525....?
You need to provide more info if you want help.
Start by creating a signature summarizing your device's set up.
Default is not always default....keep this in mind!
I don't know what data plan you have but I'll start with this:
Start > Setting > Connection > Connection > Advanced > Select Networks > In the Drop down box...you probably have Media Net, Try ATT Wap or vice versa.
This all I can do for you because you failed to provide more info. Based on the radios you've tried, I'm assuming you're on WM 6.1. Also, you need to address this issue in the thread of the Rom you're using.
You've said also that this issue repeats on several Roms.....What are you using to configure your Network settings?
Either Network Config or your cab file is not working properly you. You may have to manually input your settings. They are located around here somewhere or google it.
Click to expand...
Click to collapse
I'm sorry I thought I was providing enough info. I used the network config ROM that was built in to most of the windows 6.1 ROMs but I also used the "default" settings from att. (I ment defauld because that is what att shipps)
But if you want more info here is my network settings
When I first hit "connection settings" I have in bold "MY ISP" and "My Work Network"
if you go to manage "MY ISP" it has the config for att's isp. here are the settings:
Access Point Name: isp.cingular
UserName: [email protected]
Password: CINGULAR1
(also set to use server IP)
_________________________________________________________________
Under the "Advance" tab I have 3 choices for each drop-down menu they are "My ISP" (which is selected for the top "programs automatically connect to the internet"), "MEdia Net", and "My Work Network" (which is selected for "programs that automatically connect to a private network)
the "MEdia Net" settings are as follows (and I have switched between using ISP and MEdia net in the drop down menu for internet and get the same problem)
Access Point Name:wap.cingular
User Name: [email protected]
Password: CINGULAR1
(also set to use server IP)
_________________________________________________________________
I hope that is enough info like I said earlier my roms is currently DCS v1.7 and I'm running radio 1.64 as a side not it doesn't seem like my GPS is working correctly since it hasn't found a lock in 5min. But I think I've found the thread to help me with that. Again I'm having trouble with only syncing my e-mail althouth internet works just fine
I'm in your boat too. I have the same settings but under media net. I read one place to use the username and password you have but ATT says to leave blank and then run some cab file for proxy info. (I didn't do that) So far it has the exact settings you have, my PIE works and everything. Just can't send receive mail.
At this point though, mine just says connecting, and then asks me to verify my username and password, then I get ..
"Messages cannot be downloaded to your movile device. Make sure you are connected and that your email account settings are correct. Then, try to download messages again. "
I've tried 2 different email addresses..
ChumleyEX said:
I'm in your boat too. I have the same settings but under media net. I read one place to use the username and password you have but ATT says to leave blank and then run some cab file for proxy info. (I didn't do that) So far it has the exact settings you have, my PIE works and everything. Just can't send receive mail.
At this point though, mine just says connecting, and then asks me to verify my username and password, then I get ..
"Messages cannot be downloaded to your movile device. Make sure you are connected and that your email account settings are correct. Then, try to download messages again. "
I've tried 2 different email addresses..
Click to expand...
Click to collapse
that's actually the first time I heard something about proxy settings. Where is that cab just in case (I'm willing to try anything)
I didn't use that cab but I did try Cingular PDA MediaNet MMS Settingsv2.cab
it should be attached.
EDIT
I know what solved my problem, paying a past due bill.
Problem Solved
OK, one piece of info that I didn't realize was important was that I am on the unlimited MEdia Net plan (which uses WAP.CINGULAR.COM) and the PDA plan, which is way more expensive uses ISP.CINGULAR.COM apparently I needed to change any network that was WAP and change it to ISP to get my pda to use things that I guess are usually covered in the PDA Data plan.
Thanks for your help everyone and I hope this can be used for someone else as well. long story short.....
media net=wap.cingular
pda plan=isp.cingular
I have just upgraded from a DIAM 100 to a 130 so now 3G works beautifully.
However my mail set up fails to synchronise (both bigpond and windows live).
It will work on wifi but will not work otherwise (full 5 bars reception and internet does work.)
I figured it must be the settings for my telstra internet/wap setting however when i go into connections, it tells me that this is preconfigured and cannot be modified.
So has anyone else had this problem and how did you fix it.
I have wasted several hours of on hold to Telstra so I thought I would ask this forum first.
I have searched the fora without success for this problem.
Many thanks
thedoc said:
I have just upgraded from a DIAM 100 to a 130 so now 3G works beautifully.
However my mail set up fails to synchronise (both bigpond and windows live).
It will work on wifi but will not work otherwise (full 5 bars reception and internet does work.)
I figured it must be the settings for my telstra internet/wap setting however when i go into connections, it tells me that this is preconfigured and cannot be modified.
So has anyone else had this problem and how did you fix it.
I have wasted several hours of on hold to Telstra so I thought I would ask this forum first.
I have searched the fora without success for this problem.
Many thanks
Click to expand...
Click to collapse
Flexmail for the win!
I have exactly the same problem. I'm assuming the Teltra ROM is locked down and you can't do much with it.
The problem is the proxy settings, don't enter them and you will be able to use msn and email, but you will loose access to the "free to browse" Telstra pages
Copied from http://configure.telstra.com.au
1. On the handset, tap on the Start button.
2. Tap on Settings.
3. Tap on Connections tab.
4. Tap on Connections icon.
5. Tap on Add a new modem connection under My Work Network.
6. Enter Telstra Internet in the Enter a name for the connection field.
7. Select Cellular Line (GPRS, 3G) in the drop down list under Select a modem.
8. Tap on Next.
9. Enter telstra.wap in the Access point name field.
10. Tap on Next.
11. Enter a username in the User name field or otherwise leave it blank.
12. Enter a password in the Password field or otherwise leave it blank.
13. Tap on Advanced.
14. Select Use server-assigned IP address.
15. Tap on OK.
16. Tap on Finish.
17. Tap on Set up my proxy server under My Work Network.
18. Make sure that This network connects to the Internet and This network uses a proxy server to connect to the Internet are checked.
19. Tap on Advanced.
20. Tap on HTTP.
21. Enter 10.1.1.181 in the Server field.
22. Enter 80 in the Port field.
23. Tap on OK three times.
Fix in Advanced Server Settings
I had this problem and fixed pretty easily by going into email inbox tab, then press menu / tools / options then tap an account to change its settings. click 'edit account setup' press next a couple times until you get to a page with "Advanced Server Settings" down the bottom in blue. click on that and change the network connection box from 'The internet' to telstra internet. click done and next til the setup is finished and you should be able to get your mail over the 3G connection
Hey guys,
I used diamond then shifted to Omnia and now back on Diamond.
Diamond was never able to use airtel live and the customer care people used to say that the service is not available to any Windows Mobile Device and i need to buy Mobile Office to use net on my cell. Bull S***..!!
Then i went to Omnia and it was able to run Airtel Live. Damn.. Whats wrong with Diamond then.
For some reasons i shifted back to Diamond and searched day and night to find out the solution. Here it is:-
1. Activate Airtel Live by sending the following SMS to 121: MASALA ACTIVE.
2. The service takes atleast 3-4 hours to get active. Restart the phone and resume configuring.
3. Tap Start -> Settings.
4. Select Connections Tab and tap Connections.
5. Select Advanced Tab, tap Select Networks button to bring up Network Management.
6. Under "Programs that automatically connect to the Internet should connect using:" drop down, tap the New button.
7. In the General Tab, type the name of the settings as Airtel Live
8. Select Modem tab, tap New...
9. Type the name of connection as Airtel Live, select the modem as Cellular Line (GPRS) and tap Next.
10. Type Access Point Name as airtelfun.com and tap next.
11. Leave username, password and domain blank and tap finish.
12. Select Proxy Settings tab. Tap "This network connects to the Internet". This should enable the next check box option.
13. Tap "This network uses a proxy server to connect to the Internet".
14. Type the proxy server as: 100.1.200.99 and then tap Advanced...
15. Tap HTTP, leave the server as 100.1.200.99 and change the port to 8080
16. Similarly tap WAP, Secure WAP and Socks, type the server as 100.1.200.99 but leave the port to defaults. These are optional settings.
17. Tap OK to close the Advanced proxy setup screen.
18. Tap OK to close the New connection screen.
19. The network management screen should now list the new connection you have created in the drop-down. Tap OK to close this screen
20. Tap OK to close the connection screen.
And its done. Use IE or Opera and have fun.
Njoi..!!
do leave a "Thanks" if it works out.
I did all the steps and after them there's the Edge icon on the signal bar when some application try to connect to internet...but i still any application is not able to access the internet. When I open the site in IE i get "Request not authorized to access WAP gateway". Also its not that I don't have WAP access on my Airtel connection, the same SIM is able to access WAP sites through nokia's default browser in my older nokia 6600
NOP still works? i thought it was stopped sometime back. Will try it out.
umm..any idea whats the downloading/browsing charges?
btw..i'm in bombay
Mafioso said:
I did all the steps and after them there's the Edge icon on the signal bar when some application try to connect to internet...but i still any application is not able to access the internet. When I open the site in IE i get "Request not authorized to access WAP gateway". Also its not that I don't have WAP access on my Airtel connection, the same SIM is able to access WAP sites through nokia's default browser in my older nokia 6600
Click to expand...
Click to collapse
i used to use NOP to browse net on my laptop.
airtel tried to act smart, it blocked many browsers so that only few browsers can access the web. on my laptop, i changed the user agent and worked like a charm
hmm...for mobile...i used opera mini
fazalali110 said:
i used to use NOP to browse net on my laptop.
airtel tried to act smart, it blocked many browsers so that only few browsers can access the web. on my laptop, i changed the user agent and worked like a charm
hmm...for mobile...i used opera mini
Click to expand...
Click to collapse
I think NOP has subscription charges as 100/month...
cool. its working. another reason to luv my diamond
gmail problem now !
Blackberry connect, on htc pp300 running onWM 6.1, used to freeze the mobile frequently. After making these changes, there are no more hangs
Now gmail connection has stopped working. I get an error "error synchronizing". I tried both POP3 and IMAP connections. Any suggestions on how to fix the problem.