Internet Connection issues have searched/read faq - Tilt, TyTN II, MDA Vario III General

I recently flashed to this dutty release. I'm using the 1.27.12.17 Radio on ATT 's network.
For some reason I cannot connect to the internet using internet explorer.
I am able to send and recieve emails with blackberry connect, and I get the weather updates through the weather plugin. When I try to use IE, it never navigates away from the dutty start page.
I have run the connection setup program and I have also tried the following manual steps. Neither seems to work. Any advice would be welcomed.
tap start
tap settings
tap connections tab
tap connections
tap set up my proxy server
uncheck this network uses a proxy server to connect to the internet
leave this network connects to the internet checked
tap ok
tap advanced tab
tap select networks
both should be set to medianet
tap edit on the top/bottom (both are the same settings
tap edit... again
tap next
enter wap.cingular
username [email protected]
password CINGULAR1
tap finish
ok out of all screens
soft reset by pushing the reset button to the top right of the usb port with your stylus.
I've also tried:
To get to the connection settings:
Start Menu/Settings/Connections/advanced/select networks/click "new" if media net isn't there or click edit if media net is there/ fill in these settings:
MEdia Net:
General: MEdia Net
Modem:Edit(MEdia Net)/New(Create Media Net):
Name: MEdia Net
Modem:Cellular Line (GPRS , 3G)
Hit next
Access Point name: wap.cingular
Hit next
Leave first three fields empty(if you know what to put put in but it doesn't really matter)
Hit advanced
Select Use server assigned IP address
Select Use IP Header compression
Servers:
Select Use server assigned address
HIT OK
Hit finished
Proxy Settings:
Select This network connects to the Internet
Select This network uses a proxy server. . . .
Proxy Server: wireless.cingular.com
Hit advanced
Hit HTTP
Port:80
Hit ok
Hit Socks
Server: localhost
Port: 1080
Hit ok
AT&T ISP:
General:AT&T ISP
Modem:Edit(Edit My ISP*Change name to AT&T ISP GPRS*/New(Create AT&T ISP GPRS):
Name: AT&T GPRS
Modem:Cellular Line (GPRS , 3G)
Hit next
Hit next
Access Point name: isp.cingular
Hit next
Leave first three fields empty(if you know what to put put in but it doesn't really matter)
Hit Finish
Hit ok
Lastly, i've tried using Opera Mobile 4 from a har install through Active Sync. none of these methods work.
Any ideas?

Related

gprs settings for a xda2i

hi ,can anybody give me the gprs settings so i can use msn messenger and browse the internet,ive been told there might be a patch out there that you put in the phone and it ajusts it itself,can anyone help plx thx
There's a useful list of UK operators GPRS settings at http://www.filesaveas.com/gprs.html
or try these
How do I manually check/setup the GPRS Web settings?
Start > Settings > Connections > Connections >
Under My ISP tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: mobile.o2.co.uk
Tap Next
Username2web
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Use Specific Server Addresses should be selected
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap OK
Tap Finish
How do I manually check/setup the GPRS WAP settings?
Start > Settings > Connections > Connections >
Under My Work Network tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: wap.o2.co.uk (for Prepay enter payandgo.o2.co.uk)
Tap Next
Username2wap (for Prepay enter payandgo)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Only Use Server-assigned Address should be selected
Tap OK
Tap Finish
Tap Proxy Settings
Tap Advanced
In the WAP field enter 193.113.200.195
In the field to the right of this enter 9201
Tap OK and exit
How do I manually check/setup the MMS settings?
Start > Messaging > Tools > MMS Settings
Connect Via: My Work Network (this links to the GPRS WAP settings)
Tick Retrieve Messages Immediately
Tick OK to download when roaming
Tick Save sent messages
Attempts before give up: 3
Photo Resolution: Original
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitations: 100K
Tap OK twice to exit
How do I manually check/setup the POP3 settings?
Start > Messaging > Accounts > Accounts >
Tap the name of your email account (or tap New to setup a new account)
Email address: enter your full email address
Tap Next
Your Name: your full name (or can be anything)
User Name: your email account username (the format will differ across ISP's)
Password: your email account password
Tick Save Password
Tap Next
In the Name field you can enter a name for the account (only possible if setting up new account)
Tap Next
Incoming Mail: your ISP incoming mail server
Outgoing Mail: smtp.o2.co.uk
Leave the Domain field blank
Tap Finish

GPRS Setup for O2 Ireland

Hi there,
I have the Qtek 9090 with an O2 pay as you go sim. O2 said that the sim card should work.
Go to Start > Settings > Connections Tab > Add a new modem connection.
Enter the following settings:
Enter a name for the connection: o2 gprs web
Select a modem: Cellular line (GPRS)
Press Next button
Access point name: internet (contract) / pp.internet (speakeasy) *
Press Next button
Username: gprs
Password: gprs
Domain: leave blank
Press Advanced button, leave first page as is. Press the Servers tab, tick the option "Use specific server address" and enter the following:
DNS: 62.40.32.33
Alt DNS: 62.40.32.34
WINS: leave blank
Alts WINS: leave blank
Press Ok then Finish
still get the following Error message:
cannot connect for unknown reason. to check your connection settings and change them if needed, tap settings.........if problem continues reset your devive according to manufacture documentation.
Please help! Thanks

GPRS Internet Explorer t-mobile uk settings connection

1
Find "Advanced"
Press Start.
Press Settings.
Press the Connections tab.
Press Connections.
Press the Advanced tab.
2
Create new connection settings for WAP and Internet
Press Select Networks.
Press New... below Programs that automatically connect to the Internet should connect using.
3
Enter name
Press the Enter a name for these settings input field and key in T-Mobile GPRS
Press ok.
4
Edit settings
Press the Programs that automatically connect to the Internet should connect using drop down list.
Press the connection settings you have just set up (T-Mobile GPRS).
Press Edit... below Programs that automatically connect to the Internet should connect using.
5
Create new data connection
Press New....
Key in T-Mobile GPRS
Information
If you want to establish a GPRS dial-up connection via another PDA or phone with a modem, you need to select the Generic IrDA connection type.
6
Select connection type
Press the Select a modem drop down list.
Press Cellular Line (GPRS).
Press Next.
Information
The APN name general.t-mobile.uk must be in lower case letters.
If you selected the connection type Generic IrDA in step 6, you are now asked to key in a dial-up number. Key in *99# and go to step 8.
7
Enter APN name
Press the Access point name input field and key in general.t-mobile.uk
Press Next.
8
Enter username
Press the User name input field and key in user
9
Enter password
Press the Password input field and key in one2one
10
Delete domain name
Press the Domain input field and make sure the field is empty.
Information
You do not need to edit the settings in Advanced....
11
Save settings
Press Finish to save the settings and return to the list of data connections.
12
Activate the data connection
Press the data connection you have just created (T-Mobile GPRS) to mark it.
Press OK to activate the data connection.
13
Exit
Press OK twice to exit the menu item.
Press Close to return to stand-by mode.
also found these settings
T-Mobile
GPRS Settings (WAP)
Profile / Connection Name T-mobile GPRS
Data Bearer GPRS
Access Point Name (APN) general.t-mobile.uk
Username user
Password wap
Authentication type Normal
Gateway IP address 149.254.1.10
Homepage http://wap.t-mobile.co.uk/
Connection Security Off
Session Mode Permanent / Continuous
Port Number 9201
BUT REMEMBER t-mobile has to have enabled your SIM card to engage in GPRS. Check with them as this is not an automatic default.

Problem with proxy trick

my t-zone was working fine till like last week. Also before when i used to turn on my fone the Data connected, the MMS connected, and the WModen Link connected, but now only the Data connects, and sometimes the data doesnt connect and the other two connect. If i manually connect to MMS first then WModem Link also connects. But if i try to connect the Data first then the other two wont connect. And with the MMS connected i wont recieve any text messages, WTF somebody help
this is my setting
T-ZONES PROXY SETUP
Start Menu
Click Settings
Select Connections Tab
Select Connections (on the page)
Select "Set up my proxy server"
Select Proxy Settings (tab at bottom)
Put in checkmarks for both "This network connects to the internet" AND "This network uses a Proxy server to connect to the Internet"
In the proxy server box enter: 216.155.165.50
Click on Advanced
Tap HTTP
Change the server setting to: 216.155.165.50
Changer the port setting to 8080
Username: leave blank
Password: leave blank
Domain: leave blank
Tap "OK" in the upper right corner
Tap Socks
Change the server setting to: 216.155.165.50
Changer the port setting to 1080<<<< MAKE SURE this is 1080 NOT 8080
Type: Socks 4
Username: leave blank
Password: leave blank
Domain: leave blank
Tap OK
Tap Ok
MMS Setup
Start >> Messaging >> MMS >> Menu >> Tools >> Options >> MMS >> Servers >> T-Mobile MMS
Server Name: T-Mobile MMS
Gateway: 216.155.165.50
Port number: 8080
Server address: "http://216.155.174.84/servlets/mms" <<< without the quotes
Connect via: T-Mobile Data
Sending size limit: 300k
Wap Version: WAP 2.0
Select OK
Select OK
Select OK
Now send yourself an MMS
can't help u on the mms but as far as the web proxy is concerned, make sure you have the correct networks selected for applications to access the net.
Start > Settings > Connections > Connections > Advanced (tab at bottom) > "Select Networks"
The network i use is called "Tmobile Data" so i just make sure that is the network i have selected and not 'my work network' or 'my isp'

o2 pay as you go setting help plz

sorry if this has been asked a million times before i have been searching for two days trying to get the internet to work on ya sons touch diamond
this phone was on contract on o2 he is now trying to set it up on his pay and go simplisty sim which includes free internet .
I have tryed so many different settings to get the internet working and email
all i get are network error messages.
the only way i can get it to conect is via wifi
and help would be great thanks in advance
Gary
Theres a cab file with the settings in. I cant remember where i got it from, but if you PM your e-mail address i will mail it to you.
I think its called DeploySP.cab
Hi, I'm on the same network and on the Text and Web simplicity tariff. Here is what I did. The Windows mobile version I'm using is wm6.5.x, with the start menu at the bottom left.
To enter the settings first click "start", then click "setting", then "connections".
First click manage existing connections, and delete the modem connection specified in here. (Not required but advised) As this is configured by the device and the setting are incorrect.
Next go back a step. Then click add new modem connection.
“Select a Modem” should be set for “Cellular Line (GPRS)” or “Cellular Line GPRS/3G”
Now click “Next” to start inputting the operator specific settings.
Name the connection: O2 (PAYG)
Access Point Name (PAYG): payandgo.o2.co.uk
Username (PAYG) payandgo
Password: password
Tap “Advanced” and make sure both tabs have selected “Use Server Assigned IP Address”
Tap “Finish” then Tap “Proxy Settings”.
Select “This network connects to the Internet” and “ This network connects to a proxy server…”
Tap “Advanced” then WAP. Server address is: 193.113.200.195: Port 9201. Tap OK
Tap Socks: Server is 193.113.200.195: Port 1080. Type: Socks 4.
I can confirm these settings work as I use the internet everyday on my Touch Pro. Hope this helps. If you struggle pm me.
Hello sb.oddworld,
Working on HTC Kaiser on O2
Many thanks,
SW ;o)

Categories

Resources