my t-zone was working fine till like last week. Also before when i used to turn on my fone the Data connected, the MMS connected, and the WModen Link connected, but now only the Data connects, and sometimes the data doesnt connect and the other two connect. If i manually connect to MMS first then WModem Link also connects. But if i try to connect the Data first then the other two wont connect. And with the MMS connected i wont recieve any text messages, WTF somebody help
this is my setting
T-ZONES PROXY SETUP
Start Menu
Click Settings
Select Connections Tab
Select Connections (on the page)
Select "Set up my proxy server"
Select Proxy Settings (tab at bottom)
Put in checkmarks for both "This network connects to the internet" AND "This network uses a Proxy server to connect to the Internet"
In the proxy server box enter: 216.155.165.50
Click on Advanced
Tap HTTP
Change the server setting to: 216.155.165.50
Changer the port setting to 8080
Username: leave blank
Password: leave blank
Domain: leave blank
Tap "OK" in the upper right corner
Tap Socks
Change the server setting to: 216.155.165.50
Changer the port setting to 1080<<<< MAKE SURE this is 1080 NOT 8080
Type: Socks 4
Username: leave blank
Password: leave blank
Domain: leave blank
Tap OK
Tap Ok
MMS Setup
Start >> Messaging >> MMS >> Menu >> Tools >> Options >> MMS >> Servers >> T-Mobile MMS
Server Name: T-Mobile MMS
Gateway: 216.155.165.50
Port number: 8080
Server address: "http://216.155.174.84/servlets/mms" <<< without the quotes
Connect via: T-Mobile Data
Sending size limit: 300k
Wap Version: WAP 2.0
Select OK
Select OK
Select OK
Now send yourself an MMS
can't help u on the mms but as far as the web proxy is concerned, make sure you have the correct networks selected for applications to access the net.
Start > Settings > Connections > Connections > Advanced (tab at bottom) > "Select Networks"
The network i use is called "Tmobile Data" so i just make sure that is the network i have selected and not 'my work network' or 'my isp'
Related
So, when I upgraded to WM5 I lost MediaNet.
This would have been in Start >> Settings >> Connection Tab >> Conection Icon. Then one of the Drop Downs along with My Work Network and My ISP.
I have no clue how to setup - of cource.
Edit: I think this is it below but I can not connect....
Code:
Tap on Advance tab > Select Networks
Select the drop down to My ISP and click on Edit... > New…
Enter a name for these settings : My GPRS
Select a modem: Cellular Line (GPRS)
Tap on Next
Access point name: wap.cingular or isp.cingular depending upon the plan you are entitled to use. (if not sure of the plan, try wap.cingular)
Username: [email][email protected][/email] or [email][email protected][/email] (depending upon the plan you have as above)
Password: CINGULAR1 (password is case sensitive)
Tap on FINISH > OK > OK > OK >X
here is a link to them all..
if you need help PM me..
http://www.mobilegadgetnews.com/index.php?showtopic=6790
That's the ticket! Thank You VERY MUCH
Code:
WAP Settings for GPRS Profile
Create new GPRS connection.
Description: Cingular WAP
Connects to: The Internet
Access point: WAP.CINGULAR
User name: [email][email protected][/email]
Password: ZJULDAGEN98810
well I think you can use the data acceleration version too.. not sure if you need the pda plan or not though.. glad you got it working..
Accerleration? I messed that on that page... I'll give it a try.
Thanks for you help.
Code:
[U]Data Connect Settings for GPRS Profile[/U]
Create new GPRS connection.
Description: Cingular GPRS
Connects to: The Internet
Access point: ISP.CINGULAR
User name: [email][email protected][/email]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
User name: [email][email protected][/email]
Password: ZXY203DC9K0402
Yep, the above does work and it is much faster! Thanks for pointing that out!
hi ,can anybody give me the gprs settings so i can use msn messenger and browse the internet,ive been told there might be a patch out there that you put in the phone and it ajusts it itself,can anyone help plx thx
There's a useful list of UK operators GPRS settings at http://www.filesaveas.com/gprs.html
or try these
How do I manually check/setup the GPRS Web settings?
Start > Settings > Connections > Connections >
Under My ISP tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: mobile.o2.co.uk
Tap Next
Username2web
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Use Specific Server Addresses should be selected
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap OK
Tap Finish
How do I manually check/setup the GPRS WAP settings?
Start > Settings > Connections > Connections >
Under My Work Network tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: wap.o2.co.uk (for Prepay enter payandgo.o2.co.uk)
Tap Next
Username2wap (for Prepay enter payandgo)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Only Use Server-assigned Address should be selected
Tap OK
Tap Finish
Tap Proxy Settings
Tap Advanced
In the WAP field enter 193.113.200.195
In the field to the right of this enter 9201
Tap OK and exit
How do I manually check/setup the MMS settings?
Start > Messaging > Tools > MMS Settings
Connect Via: My Work Network (this links to the GPRS WAP settings)
Tick Retrieve Messages Immediately
Tick OK to download when roaming
Tick Save sent messages
Attempts before give up: 3
Photo Resolution: Original
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitations: 100K
Tap OK twice to exit
How do I manually check/setup the POP3 settings?
Start > Messaging > Accounts > Accounts >
Tap the name of your email account (or tap New to setup a new account)
Email address: enter your full email address
Tap Next
Your Name: your full name (or can be anything)
User Name: your email account username (the format will differ across ISP's)
Password: your email account password
Tick Save Password
Tap Next
In the Name field you can enter a name for the account (only possible if setting up new account)
Tap Next
Incoming Mail: your ISP incoming mail server
Outgoing Mail: smtp.o2.co.uk
Leave the Domain field blank
Tap Finish
I am having problems setting up the US T-Mobile data settings. I have done search after search and come up with three .cab's that say they contain the settings:
1. T-Mobile_Network_Customizations - does not install
2. t-mobile_network_customizations_335 - does not install
3. T-MobileUStPPC - installs, but does not seem to make any changes after resetting
I even found a few threads that talk about using T-Zones for all of your connections to reduce your monthly bill.
The problem that I am having is that everything that is referenced in the phone settings does not match what I see.
When I goto:
Start / Settings / Connections ... Connections tab
I see:
My ISP
Add a new modem connection
My Work Network
Add a new modem connection
Add a new VPN server connection
Set up my proxy server
What am I missing?
Thanks for the help / flames in advance.
go over to howardforums. they have a thread all about this. You'll findit by searching.
http://www.howardforums.com/forumdisplay.php?f=324
even though I'm bored to tears here at work, I'll let you find it. Teach a man to fish sort of thing...
I use this wap setting with proxy to see real web pages
Code:
T-Mobile web/t-zones proxy
modem: cellular line gprs
Access Point Name: wap.voicestream.com
user name:
password:
domain:*
proxy settings:
proxy server: getmorespeed.voicestream.com
advanced
http: getmorespeed.voicestream.com port: 8080
WAP: wap.voicestream.com port: 9201
Secure WAP proxy: wap.voicestream.com port: 9203
Code:
To get MMS working go to Start>Messaging
Select any account then select Menu>tools>Options>Account Setup
Edit the one called Media Messages the select Menu>Edit Connections
Delete any connections you have and create this one:
CODE
Description: T-Mobile MMS
MMSC address: [url]http://216.155.174.84/servlets/mms[/url]
Data connection: MMS Network
Gateway: WAP 1.0 Gateway
IP address: 216.155.165.50
Port: 9201
GPRS Settings
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
prestonmcafee said:
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
Using just this will work sometimes.
You need to also add wap.voicestream.com and an auto picker will install and based on what you're doing, the proper data connection will be used.
prestonmcafee said:
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
This is strange I never had to use the internet2 apn. I just use the wap.voicestream.com and it works fine. Is anyone that is using both noticing any type of difference in connection?
@Peraltah
You can use either APN.
I always leave everything blank and The Edge/GPRS works all the time.
how do i ovecloked
dwny said:
Using just this will work sometimes.
You need to also add wap.voicestream.com and an auto picker will install and based on what you're doing, the proper data connection will be used.
Click to expand...
Click to collapse
i too use mda.can someone tell me how to overclocked
I recently flashed to this dutty release. I'm using the 1.27.12.17 Radio on ATT 's network.
For some reason I cannot connect to the internet using internet explorer.
I am able to send and recieve emails with blackberry connect, and I get the weather updates through the weather plugin. When I try to use IE, it never navigates away from the dutty start page.
I have run the connection setup program and I have also tried the following manual steps. Neither seems to work. Any advice would be welcomed.
tap start
tap settings
tap connections tab
tap connections
tap set up my proxy server
uncheck this network uses a proxy server to connect to the internet
leave this network connects to the internet checked
tap ok
tap advanced tab
tap select networks
both should be set to medianet
tap edit on the top/bottom (both are the same settings
tap edit... again
tap next
enter wap.cingular
username [email protected]
password CINGULAR1
tap finish
ok out of all screens
soft reset by pushing the reset button to the top right of the usb port with your stylus.
I've also tried:
To get to the connection settings:
Start Menu/Settings/Connections/advanced/select networks/click "new" if media net isn't there or click edit if media net is there/ fill in these settings:
MEdia Net:
General: MEdia Net
Modem:Edit(MEdia Net)/New(Create Media Net):
Name: MEdia Net
Modem:Cellular Line (GPRS , 3G)
Hit next
Access Point name: wap.cingular
Hit next
Leave first three fields empty(if you know what to put put in but it doesn't really matter)
Hit advanced
Select Use server assigned IP address
Select Use IP Header compression
Servers:
Select Use server assigned address
HIT OK
Hit finished
Proxy Settings:
Select This network connects to the Internet
Select This network uses a proxy server. . . .
Proxy Server: wireless.cingular.com
Hit advanced
Hit HTTP
Port:80
Hit ok
Hit Socks
Server: localhost
Port: 1080
Hit ok
AT&T ISP:
General:AT&T ISP
Modem:Edit(Edit My ISP*Change name to AT&T ISP GPRS*/New(Create AT&T ISP GPRS):
Name: AT&T GPRS
Modem:Cellular Line (GPRS , 3G)
Hit next
Hit next
Access Point name: isp.cingular
Hit next
Leave first three fields empty(if you know what to put put in but it doesn't really matter)
Hit Finish
Hit ok
Lastly, i've tried using Opera Mobile 4 from a har install through Active Sync. none of these methods work.
Any ideas?
My Lebanese ISP doesn't have special Nexus One settings for GPRS/Edge so they sent me the HTC HD one!
I tried to enter the proxy,APN,username,password and port but I am getting ''Access Denied''
WAP configuration for HTC HD:
1. Go to Start, Settings, Connections
2. Click on Connections. If the "My Work Network" does not appear, do the following:
a. Go to Advanced
b. Click on Select Networks
c. In the second list choose My Work Network, then click OK
d. Go to Tasks
3. Under My Work Network click on Add a new modem connection
4. Enter a name for the connection: AlfaWAP
5. Select a modem: Cellular Line (GPRS, 3G)
6. Click Next
7. Access point name: wap.mic1.com.lb
8. Click Next
9. User name: mic1
Password: mic1
Domain:
10. Click Finish
11. Under My Work Network click on Set up my proxy server
12. Select This network connects to the Internet
13. Select This network uses a proxy server to connect to the Internet
14. Click on Advanced…
15. Make sure to do the exact following settings:
Server Port
HTTP: 192.168.23.50------- Port: 80
WAP: 192.168.23.50 ------ Port: 9201
16. Click OK
17. Click OK
18. Click OK
19. Click X
Have you tried it with out the username and password?
Oh and you may wanna take this to Q&A, this sections for news.
Try to enter:
Name - whatever you like
APN - wap.mic1.com.lb
Proxy - 192.168.23.50
Port - 80
Username - mic1
Password - mic1
APN type - default
Didn't work!
APN type shouldnt be Edge?
No, APN type is either "default" or "mms" for MMS setting. The phone will use the best connection type it can find.
What's the "Authentification type" set to?
It's on PAP