Database Develop

[SX66] Cingular MediaNet - how to setup?

So, when I upgraded to WM5 I lost MediaNet.
This would have been in Start >> Settings >> Connection Tab >> Conection Icon. Then one of the Drop Downs along with My Work Network and My ISP.
I have no clue how to setup - of cource.
Edit: I think this is it below but I can not connect....
Code:
Tap on Advance tab > Select Networks
Select the drop down to My ISP and click on Edit... > New…
Enter a name for these settings : My GPRS
Select a modem: Cellular Line (GPRS)
Tap on Next
Access point name: wap.cingular or isp.cingular depending upon the plan you are entitled to use. (if not sure of the plan, try wap.cingular)
Username: [email][email protected][/email] or [email][email protected][/email] (depending upon the plan you have as above)
Password: CINGULAR1 (password is case sensitive)
Tap on FINISH > OK > OK > OK >X

here is a link to them all..
if you need help PM me..
http://www.mobilegadgetnews.com/index.php?showtopic=6790

That's the ticket! Thank You VERY MUCH
Code:
WAP Settings for GPRS Profile
Create new GPRS connection.
Description: Cingular WAP
Connects to: The Internet
Access point: WAP.CINGULAR
User name: [email][email protected][/email]
Password: ZJULDAGEN98810

well I think you can use the data acceleration version too.. not sure if you need the pda plan or not though.. glad you got it working..

Accerleration? I messed that on that page... I'll give it a try.
Thanks for you help.

Code:
[U]Data Connect Settings for GPRS Profile[/U]
Create new GPRS connection.
Description: Cingular GPRS
Connects to: The Internet
Access point: ISP.CINGULAR
User name: [email][email protected][/email]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
User name: [email][email protected][/email]
Password: ZXY203DC9K0402
Yep, the above does work and it is much faster! Thanks for pointing that out!

US T-Mobile Data settings and 1st Edition of Molski's 3.0.0.0 AKU3.2 Rom

I am having problems setting up the US T-Mobile data settings. I have done search after search and come up with three .cab's that say they contain the settings:
1. T-Mobile_Network_Customizations - does not install
2. t-mobile_network_customizations_335 - does not install
3. T-MobileUStPPC - installs, but does not seem to make any changes after resetting
I even found a few threads that talk about using T-Zones for all of your connections to reduce your monthly bill.
The problem that I am having is that everything that is referenced in the phone settings does not match what I see.
When I goto:
Start / Settings / Connections ... Connections tab
I see:
My ISP
Add a new modem connection
My Work Network
Add a new modem connection
Add a new VPN server connection
Set up my proxy server
What am I missing?
Thanks for the help / flames in advance.

go over to howardforums. they have a thread all about this. You'll findit by searching.
http://www.howardforums.com/forumdisplay.php?f=324
even though I'm bored to tears here at work, I'll let you find it. Teach a man to fish sort of thing...

I use this wap setting with proxy to see real web pages
Code:
T-Mobile web/t-zones proxy
modem: cellular line gprs
Access Point Name: wap.voicestream.com
user name:
password:
domain:*
proxy settings:
proxy server: getmorespeed.voicestream.com
advanced
http: getmorespeed.voicestream.com port: 8080
WAP: wap.voicestream.com port: 9201
Secure WAP proxy: wap.voicestream.com port: 9203
Code:
To get MMS working go to Start>Messaging
Select any account then select Menu>tools>Options>Account Setup
Edit the one called Media Messages the select Menu>Edit Connections
Delete any connections you have and create this one:
CODE
Description: T-Mobile MMS
MMSC address: [url]http://216.155.174.84/servlets/mms[/url]
Data connection: MMS Network
Gateway: WAP 1.0 Gateway
IP address: 216.155.165.50
Port: 9201

GPRS Settings
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank

prestonmcafee said:
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
Using just this will work sometimes.
You need to also add wap.voicestream.com and an auto picker will install and based on what you're doing, the proper data connection will be used.

prestonmcafee said:
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
This is strange I never had to use the internet2 apn. I just use the wap.voicestream.com and it works fine. Is anyone that is using both noticing any type of difference in connection?

@Peraltah
You can use either APN.

I always leave everything blank and The Edge/GPRS works all the time.

how do i ovecloked
dwny said:
Using just this will work sometimes.
You need to also add wap.voicestream.com and an auto picker will install and based on what you're doing, the proper data connection will be used.
Click to expand...
Click to collapse
i too use mda.can someone tell me how to overclocked

GPRS Issues with WM6

i used the network setup wizard that came with the c_shekhar AKU 7.0C WM 6 ROM, but however, i cannot seem to connect to GPRS to surf or SEND and RECEIVE Multimedia Messages or MMS.
Cant seem to find a patch or whatever that will make this work. My operator is SMART and Location is Philippines. Thank you for your help.

Here's what I use.Try to send me(09186326099) MMS if you succeed
GPRS Setting
1. Go to Start > Settings > Connections
2. Under My ISP choose Create a new modem connection (some may say manage proxy settings)
3. Label Server Name as: Smart GPRS
4. Connect Via: Cellular Line (GPRS)
5. Click on "Next"
6. Access Point: Internet
7. Click on "next" until you are finished
MMS Setting
1. Messages > Menu > Options
2. Choose MMS > Servers
3. Choose "New"
4. Server name: Smart MMS
5. Gateway: 10.102.61.46
6. Port Number: 9201 (note not 8080)
7. Server Address: http://10.102.61.238:8002
8. Connect Via: Smart GPRS/My ISP
9. "Ok"
10. Set Smart MMS as your default set-up for MMS

ok will try this, thnx.

Problem with proxy trick

my t-zone was working fine till like last week. Also before when i used to turn on my fone the Data connected, the MMS connected, and the WModen Link connected, but now only the Data connects, and sometimes the data doesnt connect and the other two connect. If i manually connect to MMS first then WModem Link also connects. But if i try to connect the Data first then the other two wont connect. And with the MMS connected i wont recieve any text messages, WTF somebody help
this is my setting
T-ZONES PROXY SETUP
Start Menu
Click Settings
Select Connections Tab
Select Connections (on the page)
Select "Set up my proxy server"
Select Proxy Settings (tab at bottom)
Put in checkmarks for both "This network connects to the internet" AND "This network uses a Proxy server to connect to the Internet"
In the proxy server box enter: 216.155.165.50
Click on Advanced
Tap HTTP
Change the server setting to: 216.155.165.50
Changer the port setting to 8080
Username: leave blank
Password: leave blank
Domain: leave blank
Tap "OK" in the upper right corner
Tap Socks
Change the server setting to: 216.155.165.50
Changer the port setting to 1080<<<< MAKE SURE this is 1080 NOT 8080
Type: Socks 4
Username: leave blank
Password: leave blank
Domain: leave blank
Tap OK
Tap Ok
MMS Setup
Start >> Messaging >> MMS >> Menu >> Tools >> Options >> MMS >> Servers >> T-Mobile MMS
Server Name: T-Mobile MMS
Gateway: 216.155.165.50
Port number: 8080
Server address: "http://216.155.174.84/servlets/mms" <<< without the quotes
Connect via: T-Mobile Data
Sending size limit: 300k
Wap Version: WAP 2.0
Select OK
Select OK
Select OK
Now send yourself an MMS

can't help u on the mms but as far as the web proxy is concerned, make sure you have the correct networks selected for applications to access the net.
Start > Settings > Connections > Connections > Advanced (tab at bottom) > "Select Networks"
The network i use is called "Tmobile Data" so i just make sure that is the network i have selected and not 'my work network' or 'my isp'

Carrier Cab Request

I am having problems setting my internet settings on my Fuze... Everything worked in my Tilt... Could someone make a carrier cab for my carrier? Thank you in advance, and here are the settings that I have..
-----------------------------------------------------
Name for connection : EinsteinPCS Internet
access point name : apn (case sensitive)
Usename : (leave blank)
password: (leave blank)
domain : (leave blank)
...under advanced
User Servier assigned IP address
click ok..
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :192.168.254.251
click advanced
http: 192.168.254.251:8080
wap: 192.168.254.251:9201
secure wap: 192.168.254.251:9201
socks (blank)
-------------------------------------------------------------------
For MMS... go into MMS Options... goto servers.. set these settings :
Server Name : Einstein Wireless MMS
Gateway : 192.168.254.251
Port # : 9201
Server Address : httP//www.einsteinmms.com\+1(your 10 digit # here)
Connect via : EinsteinPCS Internet
-------------------------------------------------------------------
Thank you in advance for even considering it