Hi
I have installed HEMI AKU 3.2 on my BA.
Whene I conect BA to PC, ActiveSync starts and start to synchronize contacts.
There is problem with synchronizing it. ActiveSync shows error mesage with information "There is not enough memory on your device to synchronize information...."
Device is after restart, and there is, i thing, enough memory to synchronize it...
Help please...
MCS1
Did you perform the hive reset during the upgrade? I sync over 200 contacts to mine without problems. It does take ages the first time however.
Try preforming another hard-reset and try to sync before you set anything else up.
Yes...
I returned to AKU 3.0 1.2 version. It's working OK
I cannot find my Activesyn on my MDA. I used both File Explorer and Total Commander. I last synced on 9/18 and it worked fine. Now, I cannot connect to my laptop and I think something may have happened to my activesyn on my MDA. It is installed on my PC and seems to be working OK. However, when I try to connect my MDA to my PC, my PC cannot locate my MDA Phone. Is there a way that I can reload Activesyn to my MDA? I still get Activesyn to show up in my programs that are running in memory on my MDA.
Thanks for your help!
ActiveSYnc
You should have a shortcut ActiveSync under folder "\Windows\Start Menu\Program" of your MDA device.
Usually I launch ActiveSync from Today/Programs menu.
If the program doesn't exist you shoud re-install ActiveSync on your PC and then re-sync with your PDA.
Bye.
asctony said:
I cannot find my Activesyn on my MDA. I used both File Explorer and Total Commander. I last synced on 9/18 and it worked fine. Now, I cannot connect to my laptop and I think something may have happened to my activesyn on my MDA. It is installed on my PC and seems to be working OK. However, when I try to connect my MDA to my PC, my PC cannot locate my MDA Phone. Is there a way that I can reload Activesyn to my MDA? I still get Activesyn to show up in my programs that are running in memory on my MDA.
Thanks for your help!
Click to expand...
Click to collapse
did you install any firewall on your PC?
I have disabled my Firewall, AVG and Spysweeper before I tried to connect to the MDA.
I do not have a shortcut on my MDA for ActiveSync and I have checked the Startup folder, too. For some reason ActiveSync is not installed on my MDA. I have uninstalled ActiveSync on my PC and then did an Install of ActiveSync on my PC. Then I tried again to have the MDA recognized by my PC.
The PC recognized the MDA but when I try to have ActiveSync Connect to the MDA it Fails. I have run the Trouble Shooter and it does not find any problems.
I am at a complete loss.
Thanks for your inputs. I greatly appreciate your time and effort to help me.
I had problems same as you describe it, with sygate firewall and disableing didn't make any difference. Only after I shut it down my active sync was able to syncronize.
LittleCannon said:
I had problems same as you describe it, with sygate firewall and disabling didn't make any difference. Only after I shut it down my active sync was able to synchronize.
Click to expand...
Click to collapse
I did mean to say, 'shut it down' instead of disabling Sygate Firewall. That still did not make a difference this time. However, in the past (synced 3 times) I had no problem connecting my PC to the MDA. Just this last time. So, I believe ActiveSync is sort of flaky. Thanks, if I get it running, I will post.
Strange but true. I hade same problem which started when i accedently plug out cabel while sinc. after reboot all back in normal
Hi can anyone help. My windows vista home premium laptop has automatically updated itself and now my vario 3 wont synch with it. Iv hard reset my vario 3 to see if this was an issue but didnt resolve. Any ideas how to resolve this at all
I sometimes get the problem where the device wont sync with Vista after its been powered up for a long time without a reboot (i.e. more than half a day) or if I haven’t rebooted the machine since the last sync. If I reboot my machine it works perfectly then.
Weird!
Unless you have added a third party software firewall, WMDC 6.1 should still sync fine. As poster above says, reboot both devices.
I had this after a windows update, i just uninstalled WM device centre, connected the phone and did a search for updates and it re-downloaded it from MS
thanks
thanks guys. all sorted now
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
ActiveSync
Moved message
Needs a little bump here
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Sounds like something has changed on your PC, perhaps via a Windows Update. Have you checked to see if your firewall is the culprit?
You may also want to do a clean uninstall and then reinstall Activeswync 4.5 and create a new partnership with your device.
You can also try restoring your PC back to a date that you were able to use Activesync....
This happens to me rather frequently (I am looking for an ActiveSync replacement because of it).
However, I fix it by either soft reset of the device, PC, or sometimes both. If that doesn't work, you need to delete the partnership with the PC and reconnect.
RK
...any solutions yet?
I just got my kaiser 3 weeks ago after using a wizard for almost 2 years. what a great phone the wizard was... I kinda miss using it! Anyhow, i just experienced the sudden activesync failure. I now get random activesync openings on my kaiser with the message "To synchronize your device with a desktop computer... yada yada".
I have already setup a bogus server and set the scheduling to manual.
I have compared the wizard registry to the kaiser registry by searching every instance of 'activesync' and couldnt find anything.
I also deleted all instances of activesync in the notification queue and had memmaid rebuild it.
The device will connect to activesync but pops an error message that it could not synchronize and goes into a guest account setting. So for now I am having to use pimbackup to backup my data on the kaiser, bluetooth it to my wizard, then sync the wizard with my laptop to get the data into outlook. I am considering a hard reset but kind of want to wait until the at&t 6.1 official Rom comes out. I am also considering Chapura Pocketmirror Professional which worked well on an old Ipaq i had (wm2k3) that had sync issues. I also want to get this resolved so i can practice loading a new rom on the wizard. So....
Anyone have a fix yet? I hope so!!!
Oh, and for reference (to answer questions from other threads), my kaiser battery drains 4 to 5 times faster than the wizard in side by side use, and the kaiser definitely does not have a transflective screen while the wizard does... bummer. but the kaiser is tremednously faster!
1. Disconnect the device from your computer.
2. Try going to your device and select:
start->settings->connections->USB to PC.
3. Uncheck "enable advanced network functionality"
4. Reconnect the device.
Active Sync....
Hi,
You can try "PocketMirror® Professional 2.2.4 for Windows Mobile", its a pretty good syncronization tool, but it costs a few bucks...
I've been using the trial version of PocketMirror and must say its pretty good with my TYTN 2.
Regs,
The Reaper.
... my thoughts exactly
yeah, i tried the usb to pc option as well. even downloaded a cab from another thread that allowed me to choose rndis or usb mode. neither worked. I will probably use pocketmirror pro as well...
Hi, I just flashed a new ROM on my Orbit that works brilliantly, no issues at all, apart from the fact that the computer now doesn't see the device at all. Not even the blo-blong sound when you connect any USB device. The only thing I get connecting the cable is charging the battery. And if I start Active Sync on my Orbit I get the same message as mystic_nacho:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC"
I just tried an hard reset to try to fix the issue - no success..
Before flashing everything was fine..
Btw, my wife Diamond doesn't connect either, and it never did it: something related to the TouchFlo thing?
Any idea?
The ROM I flashed is
gullums TouchFlo2D beta 4
update
I found the Diamond 'Getting started disc' and installed the Windows Mobile resources tool...
The disc I have from the Orbit box is for Windows Mobile 5, I guess it's not worth to find it out and try...
Nothing changed, anyway.
update 2
Yesterday night out of the blue - while the Orbit was still connected to the pc - ActiveSync started to work... F. knows....
i had the same problem - sync was working fine and then stopped. what worked for me was to go to USB to PC under settings and uncheck "enable faster data syncronization".
hi,
i also had sync. problems in the past.
searched for months.. since i figured out that some registry entries on my PC where missing!
imported the mayor setting from my brothers PC and TADAAAAAA. problem solved.
search my threads and maybe you 've luck with my soloution!
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Have you recently used a memory cleaning Application like memmaid, Clear Temp, or SKTools? You might have cleaned out some important notification files, like repllog,exe that is used for activesync.
I had the same thing happen to me when I first used these cleaners. I had to do a hard reset on the phone to make it work again found out about the remedies listed below after the reset.
I have heard others were successful repairing these notification Queue's with MemMaid. You can hold your stylus on the repllog,exe notification, and a popup up will appear, asking you to Recreate ActiveSync, or rebuild notification Queue. I don't know if this feature is available in Clear Temp, or SK tools.
I've also heard of restoring activesync by unchecking all of the folders, syncing, and then adding each folder back to the list, one by one, until all is restored.
I too have just developed the same problem.
I have 2 TYTN II' one will sync fine the other wont.
It all went horribly wrong after I tried to install Wisbar and an Ipod theme, after I uninstalled it, cos it didn't work I found I could no longer sync with USB to PC and the sync option is greyed out on my phone. The phone will charge with some of my usb cables, but now even seems fussy about which cable will charge and some now won't.
I am given to wondering whether the usb connection on my Phone is the problem...everything else seems to be working fine.
I have even installed different ROMS via the memory card still the problem persists.
I would love someone to come up with a fix
**UPDATE**
Well I now have got it working, in my case I was right, the usb connection on the phone was to blame. I took it to a mobile repair shop, I told the guy that I thought it was faulty he took one look at it and said that I had a bent pin, he got a little tool out and teased it back into position, sure enough when I got home it worked fine so now I am able to sync again. Not sure how long it will last though.
**Update 2**
Failed again, at least I know what's wrong now.
I'm needing help. I flashed to the new ROM, 1.62.502.0. I did the Soft Reset thing to remove the Bloatware and restored my PIM with Sprite. After I reset my device ID I connected with Active Sync.
Now I'm stuck with Active Sync appearently in the process of "Synchronizing", however it's doing it for two hours....and it still isn't completed. I blew out the Active Sync on the PC and reloaded it, and now it is showing a second PC but still is the synchronizing endless loop...and I only have it set to sync a few files and Notes.
Can someone help me out with any suggestions?
Since no one has offered to help....Does anyone know of a place where I can get some help?
An update: I was able to sync just fine before I flashed to AT&T's new ROM. Plus I am still able to sync with my laptop, so the problem appears to be with my PC. I can also load programs and explore my PPC with the PC, however the sync process never proceeds past the "synchronizing" phase, i.e. the "processing" and then to the "connected" phase. I have un-installed and reloaded ActiveSync several times.
If no one knows ar has a suggestion....can someone point me to a third party syncronizing program....I'm really up the creek here.....
I think you would have more luck at the At&t customer forums, as people here generally don't use OEM Rom's.
Here is a link, using the search "tilt active sync not working": http://forums.wireless.att.com/cng/search?submitted=true&q=tilt+active+sync+not+working
ActiveSync BOOSTER
Is there a way to boost up speed of Sync
Is there a any software or Cab file for it ?
Also want to know after we sync Phone
It keeps repeating to sync, is there a way to stop it ?
With removing the phone
Please Help