Related
OK, I'm waiting on my XDA IIs (Blue Angel) arriving tomorrow and have a few questions before I dive right in!
(Before I go any further please note that I have spent the last few days delving into the forum and wiki on this site but just need some clarification.)
1. Can I rebrand an O2 XDA IIs to Vodafone VPx/VP 1620 (i.e change ROMs)?
2. If yes, how, and if not can I use all my Vodafone service (GPRS etc) on an O2 braded phone?
3. I have the latest ROM downloaded from O2 just in case mine needs it on arrival, will this enable the pairing to two BT devices (Headset/GPS) or will I need to update the BT stack as per the other 3500/3900 thread?
4. Can I expect any issues with Tomtom 5, or should this work OK if I don't start playing with the ROMs too much!
Thanks in advance for any advice, and I'm looking forward to trying WM5 once I pluck up the courage
Moved to BA section from general
1) Your rom has 3 parts (which you know since you read wiki) the branding is in the extrom. You want the phone to act like a BA from a different carrier then use that extrom.
2) By reading 1 and reading cooking in the extrom kitchen on wiki
3) Bt is a mess and part of the CE rom, if you have the latest rom you will have the latest BT Stack. As for pairing well have fun. There is enough info on the site to confuse you.
4) Tom Tom works on a BA as per there site.
Thanks for that... I think
So, CE ROM as standard, use Voda ExtROM for their branding, and hope for the best with BT
Sound about right?
Better get into the 'kitchen' then, eh!
i looked and looked for hours on end, for a few days now, reading posts and looking for answers/ideas. in most of the posts i got confused and overwhelmed by the differentiating opinions/advice/ideas/ and results from various members on a cartain topic or post. i dont even know what is okay to do not to do, use or not use, how to or how not to do anything anymore. im really looking for help on how to, what to, and suggestions. any help that could be given would be greatly appreciated, i hoped this site had a tutorial sections but unfortunately it doesnt unless i didnt look hard enough. thanx again to everyone for reading adn helping if they do. Thank you. I have a cingular 8125 that is carrier unlocked.
Lookin for help with:
what is the best rom to upgrade to and exactly how do it.
-what does upgrading the rom do for the wizard?
- what needs to be done to Wizard before upgrading.
hot to cid unlock the Wizard.
neccessary programs/software for the Wizard
where to find the programs
suggested programs/software for the Wizard.
where to find programs
What are some considered neccessary tweaks for the Wizard.
What do they do. ex-Wi-fi
what to do/ what never to do with Wizard
- ex. never let batter completely die
how to fully customize os
what programs or skins/themes to use.
akamavrik1012 said:
hey, thanx for takin a look. im new to posting and this site and forums in general. i dont know what im about to ask if its Ok or not. if its not, i know im going to get scolded for it, but plz just let me know how to go about it for future ref. im probably going to be asking questions that can be found throughout the site f i just looked. i looked and looked for hours on end, for a few days now, reading posts and looking for answers/ideas. in most of the posts i got confused and overwhelmed by the differentiating opinions/advice/ideas/ and results from various members on a cartain topic or post. i dont even know what is okay to do not to do, use or not use, how to or how not to do anything anymore. i just got a cingular 8125. though i am not new to windows mobile cuz ive been a heavy user or mpx200 then the mpx220 and great on a regular windows os, i didnt want to take any chances with the 8125. i dont want to install something or mess up or miss a process of installing a file or program and my 8125 is gone just as quick as i got it ot anything.one of my purposes is to leave my laptop at home when i travel or just goin round. though i am a college student, not a business man, im big on having convienience when i need it for work, or for personal use. im really looking for help on how to, what to, and suggestions. any help that could be given would be greatly appreciated, i hoped this site had a tutorial sections but unfortunately it doesnt unless i didnt look hard enough. thanx again to everyone for reading adn helping if they do. Thank you. I have a cingular 8125 that is carrier unlocked.
Lookin for help with:
what is the best rom to upgrade to and exactly how do it.
-what does upgrading the rom do for the wizard?
- what needs to be done to Wizard before upgrading.
hot to cid unlock the Wizard.
neccessary programs/software for the Wizard
where to find the programs
suggested programs/software for the Wizard.
where to find programs
What are some considered neccessary tweaks for the Wizard.
What do they do. ex-Wi-fi
what to do/ what never to do with Wizard
- ex. never let batter completely die
how to fully customize os
what programs or skins/themes to use.
Click to expand...
Click to collapse
Welcome, friend.
First, I have to admit that I have ADD, and couldn't summon the attention to read your entire post.
I do however think that what you are looking for you can find by browsing and searching these, as well as the Cingular HoFo forums.
When you say your 8125 is "carrier unlocked", do you mean SIM unlocked? If so, that's just swell, but won't allow you to install any ROMs that didn't come from Cingular. You need to CID unlock to install custom ROMs. (Tip: search for "CID unlock")
Start by reading through several pages in the plain 'ol "Wizard" forum (the forum you're in now is the Wizard upgrading forum) - you'll find lots of useability discussions in there. HoFo is good for that as well.
In the future, if you find features of some of the custom ROMs desireable, you'll need to have your device CID unlocked, and you'll have to run a program on your PC that flashes your device. When you get to that point, post a message and I or any of the other fine folks around here will help you. Be sure that you've done all the reading you can stand first though.
Here's a basic primer on some of the terms you'll see around here:
CID lock: carrier ID lock - restricts device to ROMs from originating carrier
SIM lock: locks a device to the originating carrier's SIM cards
Extended ROM: a portion of storage on a device used to store customization files
radio ROM: the code on the device that interfaces with the xmit/recv hardware
AKU: Adaptation Kit Update - essentially a service pack for Windows Mobile. These can add fixes and/or features. AKU 2.0 and above includes Direct Push
Direct Push: push mail/calendar/contacts - like Blackberry. Used with Exchange server SP2, this will push new items to your device as they arrive or are changed.
Sleep: what I should be doingzzzzz
If you're new to the Wizard and trying to pick a ROM to try, I'd suggest one of the following based on your carrier:
T-Mobile US - Download one of Xelencin's ROMs
Cingular - You want one of Summiter's creations
If you are overseas and use a different carrier, or just want a barebones ROM to customize the way you see fit, grab Mr. Clean.
Since you say you've got an 8125, I'm guessing that you're on Cingular in the US. In that case, stick with Summiter's latest as it will be a plug-and-play solution for you.
Ultimate Wizard setup
Hi There
WOW my first post on this forum. I guess there always has to be a first.
I bought my Wizard recently and the first thing I did was look at the following post
http://forum.xda-developers.com/viewtopic.php?t=53784&highlight=edge
It contains a large amount of really cool info on setup of your wizard. I didn't follow it exactly as some things may be out of date, for example the ROM image he says is the latest is 1.6 I think but I downloaded 2.x from the Imate website (mine is an Imate device bought in South Africa)
Anyway, I hope the above post helps you, it certainly did me.
Re: Ultimate Wizard setup
goodbyte said:
Hi There
WOW my first post on this forum. I guess there always has to be a first.
I bought my Wizard recently and the first thing I did was look at the following post
http://forum.xda-developers.com/viewtopic.php?t=53784&highlight=edge
It contains a large amount of really cool info on setup of your wizard. I didn't follow it exactly as some things may be out of date, for example the ROM image he says is the latest is 1.6 I think but I downloaded 2.x from the Imate website (mine is an Imate device bought in South Africa)
Anyway, I hope the above post helps you, it certainly did me.
Click to expand...
Click to collapse
A post worthy of a sticky if I have EVER seen one!!!!
I have owned my Tilt for about 7 months and have always stuck with the stock ROMs. Extremely poor signal strength in my area has led me to try new radios, which, basically, entailed that I go all in on the ROMs. Ultimately, I had to revert to the current WM6.0 AT&T Stock ROM because there were just too many problems.
I have been with XDA Developers a long time, and find it invaluable. I have also found that it now the new trend to flame rather than answer. Bottom line, it IS possible to search and not find; and, regardless, 103 page posts are not going to be of any use to anyone. Its unfortunate.
So this message is really for those who control the Wiki and for those who control Post # 1 in their threads. There is so much information I could have used which might have made my transition a success. I provide this info in hopes that each individual in possession of editing ability might consider updating their threads.
1) HardSPL - Jaberwok has a solution for the White Screen. One of the MIDDLE powered-on steps is to remove your SIM and SD Cards. It is not possible on a Tilt (at least) to remove the sim while the unit is on. I would respectfully as that Jaberwok update his Page 1 to clarify when the SIM Card should be removed. As a note, the problem is that if you unlock the sim card slot the unit freezes and tells you it will reboot when you lock it. If you leave it unlocked the unit wont boot. If there the SIM card really needs to be out, it would be great if the instructions were reshuffled so that they don't give the impression that the SIM card is to be removed from any state other than a power off, with the door of the empty chamber locked.
2) AT&T Settings - I had decided to settle on Dutty's WM6.1 Hybrid ROM as it seemed to be one of the newer ones. The AT&T connectivity customization which runs was not correct (for the United States at least). The web might connect ok via MEdia Net, but nothing else would - preferring to go to ISP (which had isp.cingular). Attempting to change these settings to mirror the Stock AT&T settings did not provide any relief. There was no way to check messages. Perhaps part of the Wiki could explain how to take anyone's custom ROM, and get it to work on the AT&T network. Checking messages would result in a "dialing error" (no matter whether the advanced connection settings were set to MEdia Net for all uses, or the values were changed to mirror the wap.cingular settings).
3) Diamond - The master ROM sticky from the Wiki is a great resource. I was afraid to try Dutty's Diamond ROM because I had no idea if Diamond was a new phone, which would then cause me to brick mine.
4) Hard Resets - All of the installation instructions, whether on the individual cooker's Post 1, or in the Rom Wiki, are fairly inconsistent on when a Hard Reset is needed. Many posts on the forum indicate Problem X -> oh did you hard reset -> yeah that worked. An example of the vagueness is: Should I hard reset before I flash HardSPL? before I flash a Radio? before a flash a ROM? and then all of the above but using "after". Unless you are a cook, cooking your favorite apps into a rom, a Hard Reset is an awful bitter pill. If there are steps which do not require a Hard Reset, it would be of great benefit to know those.
5) Radio - Would love to know if I can flash a radio without a Hard Reset afterwards. Would also love to know if I can flash a radio into the stock AT&T ROM.
6) HardSPL Post 1 - Would love to see a line about whether you need to do anything different if you already have a different HardSPL installed.
Anyway, these are the questions which I believe would be wonderful additions to the various wiki posts, etc. While I anticipate the necessary flames (gotta keep those post counts up, I guess), I believe anyone in control of these threads will note these omissions. I ask that THOSE people understand that everyone is new at flashing at least once, regardless of how experienced they are, and these omissions have tangled at least one poor soul up.
Of course, if anyone out there is also honestly willing to help with the underlying problem, I would love for some help ... I just want to get the best radio I can on my phone. If there is a ROM out there which is right for the AT&T Tilt (meaning, the AT&T connectivity settings are correct, and the keyboard is properly mapped), which has a better radio, I would dearly love to know about it.
Thanks for reading.
Re Hard resets.
Most cooked roms require you to do an additional hard reset after the device has been flashed and restarted.
This is simply something that people have learnt from experience.
The only other times you hard reset after:
1) Phone simply won't respond after trying everything
2) You've installed something and it has screwed your settings beyond any chance of recovery
3) Your rom has got cluttered after loads of installs and uninstalls... and you need to "clean" your rom but still want to keep the same one.
(But I agree that "first post" maintenance would be really handy - but the rom chefs are busy cooking - someone else should volunteer to update their first three posts.
OK But to Start all my answers were learned FROM reading and searching. Just FYI.
1) I can't really answer this. I didn't have the write screen problem.
2) If I recall correctly just about the majority of people here use MEdiaNet for their connection. There are a couple people I remember saying that they use the ISP, and they just simply changed the setting manually. If you get it to work, I'd be happy to help you create a CAB for it.
3) Rest assured that even though the Diamond is a new phone if the ROM is posted in the Kaiser Forum. Its "ok to use it on your phone. If you are worried you can wait until a couple people try it and say "This Works great" Then you can look at their signature and see they are using a Kaiser.
4) The most common answer it After a ROM flash right at when you See the "Tap to Begin" Screen.
5) I never Hard Reset after I flash a radio. I flash so much though. People recommend you flash the radio first, I've done it both ways. I Personally don't notice a difference. Questions about What radio will work with Stock AT&T ROMs, Which I believe are still WM 6.0, are toroughly answered in AllTheWays Ultimate radio Thread.
6) That would be nice. Would get more notice by the Ones in the KNow about those things if this qustion was posting in that specific thread.
7) Anyone should feel free to edit and add to the WIKI.
8) IIRC shogunmark's Death is an AT&T Tilt based ROM. But the Tytn II based Roms work fine on the Tilt. You just have to install the Tilt Keyboard Fix and Soft Reset.
jdmba said:
I have been with XDA Developers a long time, and find it invaluable. I have also found that it now the new trend to flame rather than answer. Bottom line, it IS possible to search and not find; and, regardless, 103 page posts are not going to be of any use to anyone. Its unfortunate.
Click to expand...
Click to collapse
I too have been a Tilt owner for 8 months, first came across this site last Nov. At that point, the Kaiser forum consisted of speculation on when the Tilt would appear in the US. I was a lurker for 6 months before I joined and posted my first question. Until then I searched ( Forum and Google ) for all my info and never, I mean never did I not find an answer to my questions.
Yes it took time and perseverance but the information was ALWAYS there.I will steadfastly stand here and argue with anyone who says " I searched and found nothing " and tell them " you searched, got bored, it was too much trouble, and you wanted instant gratification ", that is why you are posting. ( Except genuine questions on newly released items ).
That is the real reason why it is so difficult to search. Redundant posts and lazy people who think their time is too valuable to search. Want an example?
JimmyMcGee, over 1000 posts, 0 new threads
Harkadenn, 330 posts over forty new threads, 36 in one month alone, before he finally sold his phone. He had a problem, started a thread
One person, multiply that times 1000 people who think that we should just answer their questions as they come up, and not flame them to search.
I will do the math, 36000 new threads per month, you think it is impossible to search through crap now? It was not always like this, it was made like this.
So this message is really for those who control the Wiki and for those who control Post # 1 in their threads. There is so much information I could have used which might have made my transition a success. I provide this info in hopes that each individual in possession of editing ability might consider updating their threads.
Click to expand...
Click to collapse
Everyone has the ability to edit the Wiki. The information in this site evolves. ( see the new info about how different Spls affect your phone)The problem with the Wiki is that the people with the info mostly don't use it, the people looking for info do. Do not leave it up to everyone else. Every member has the ability and thus the responsibility to correct or update any information they feel is wrong or misguiding in the Wiki.
Anyway, these are the questions which I believe would be wonderful additions to the various wiki posts, etc. While I anticipate the necessary flames (gotta keep those post counts up, I guess), I believe anyone in control of these threads will note these omissions. I ask that THOSE people understand that everyone is new at flashing at least once, regardless of how experienced they are, and these omissions have tangled at least one poor soul up.
Click to expand...
Click to collapse
Yes we were all new at one time. Many of us searched (eight months, 200 posts, 2 new threads ) any too many didn't ( which is why we are talking about this ) . But don't blame the people flaming redundant thread starters( the people padding their post counts as you put it ). The remedy starts with you and me.
Now take the answers you get in this thread and add them to the Wiki for all others.
Hi
I havent performed any upgrades to my XDA2i (official or otherwise) for at least 3 years - are there any upgrades I should consider?
Here is my Device Info
ROM Version : 1.11.00 WWE
ROM Date : 01/27/05
Radio Version : 1.00.00
Protocol Version : 1337.39
ExtROM Version : [THIS IS BLANK]
Model Number : PH10C
Also, I am unable to connect to WiFi with my XDAIIi
The device finds wifi signals and sometimes will make a connection - but when I try and open a webpage I get a screen showing "IIS7" and nothing else.
Here are my settings for WiFi :
Network Card Connects to tiacxwin Campatible Wireless Ethernet (for both The Internet and Work).
Power Save slider is set for Best Performance.
Thanks for any help and advice !!!
Paul
I am in a similar position Paul.
I have been given a 02 XDAll by my company to use for recording surveys.
Its bog standard like yours.
I'd really like to upgrade it but the problem is there is almost too much written about it on these forums .Most of it is so old and out of date that all the links are broken. Its hard work trawling through it.
What is needed is a simple basic upgrading overview listing all the options but I suppose everyone has moved on to more recent PDA's and are no longer interested in these
I've posted a similar request in the Himilayer section .Maybe we can share what we find
Nick
Nick, do you have a Himalaya or an Alpine? PH10B or PH10C?
The Alpine is stuck on WM2003, perfectly good for its task just not upgradeable to WM5 or WM6.
As for customising it realy depends what you are looking for.
Hi DeeDee thank you for responding. I feel guilty hyjacking Paul's thread.
Mine is a Himalaya 10B
with following spec
02 XDAll
2Gb SD card
Rom 1.72.00WWE
Date03/15/04
Radio 1.17.04
ext Rom 1.72.18.1
Ram 128Mb
Model PH10B
I just wanted to improve the Active page if its possible .I cannot read the tiny text so large button icons like the Diamond would be useful
I cannot set the Internet access up either ? have tried for hours.
I have a Netgear Wireless Modem router DG834G but neither the manual or quick guide explain how to set up the XDA .
I have spent several days trawling this site and the net.
Any help appreciated thank you
Nick,
No problem joining in - if we can get the WiFi problem sorted I would be more than happy.
DeeDee,
Should my ExtROM Version be completely blank?
Thanks
Paul
Hi Paul
you're up early !
I have used WM5 on an XDA Mini S (Wizard) a couple of years ago. I imagine that most of the current software and apps are written for WM5 orWM6 so it will mean I'll need to upgrade to WM6. Presume that means flashing the Rom which judging by the number of disasters on this forum is not something I'd do lightly.
Particularly as there are virtually no answers to requests for help.
I found a statement last night that basically says unless you are a software developer you arn't welcome on this forum which probably explains the lack of help.
Yours has the 128 Rom as apposed to my 64Mb which is a big advantage. I have gone off the idea of buying a Himalaya or an Alpine as they are too antiquated really which is a shame as I love the build quality and screen size.
I'm going to look for something a bit more contemporary I think . In the mean time I'll enjoy using the works XDA ll
Hi
Flashing the Himalaya to WM5 or WM6 is painless and it has to be said slightly addictive, you will try many ROMs until you find one you like. Think I have tried most of the ROMs for the Himalaya.
The lack of help has NOTHING to do with not being a developer, i'm not one and have had lots of help. The problem is probably due to the lack of people using these PPCs. i have to confess my Himalaya is purely there as something to muck about with, work didn't want it any more. i have a Trinity as primary PPC phone and an Alpine with an application that doesn't work on WM5.
You won't get your Himalaya to connect to your WiFi as it doesn't do WiFi without an add on card.
DeeDee,
Should my (Alpine) ExtROM Version be completely blank?
Thanks
Paul
Hi Paul
Can't remember and my Alpine is at home, but i don't think so.
deedee said:
Hi
Flashing the Himalaya to WM5 or WM6 is painless and it has to be said slightly addictive, you will try many ROMs until you find one you like. Think I have tried most of the ROMs for the Himalaya.
The lack of help has NOTHING to do with not being a developer, i'm not one and have had lots of help. The problem is probably due to the lack of people using these PPCs. i have to confess my Himalaya is purely there as something to muck about with, work didn't want it any more. i have a Trinity as primary PPC phone and an Alpine with an application that doesn't work on WM5.
You won't get your Himalaya to connect to your WiFi as it doesn't do WiFi without an add on card.
Click to expand...
Click to collapse
Thankyou DeeDee I appreciate you taking the trouble to answer silly questions by a noob.
I have downloaded and printed out a 140 page manual and there was nothing clear about connecting to wi-fi
If I have to carry this Hima around with me all day I might as well have it working as well as it can.I had intended to purchase a 3g Iphone for myself but now I'm not so sure I might buy a HTC instead if I can find one with 3.5" screen and wi-fi and a reasonable interface like touchflo
Nick
i have to say the smaller screen on my Trinity is perfectly adequate and that the larger form factor of the Alpine/Himalaya means you need a headset/handsfree kit to really use it as a phone.
It's also not pocketable, which my Trinity is, just.
If you can find a decent mobile shop and have a touchy feely sesion with as many as you can.
thanks DeeDee thats excellent advice. Photos never give a good indication of size and ease of use . The size is a bind like you say its heavy and too big for a shirt pocket but it is easier for me to work with using reading glasses.
I got an 02 XDA mini S when they first came out. I found the screen too small and fiddly and it stayed in the box unused for 18 months when I sold it on ebay for nothing so I have learnt my lesson.
DeeDee may I just ask one other question please. I have trawled through the wiki and various other sources but I still haven'y founf an answer to my initial question on the Himalaya board.
Q1 How do you install a new app on the Hima or Alpine ?
Q2. where does it get installed to ?
Today we lost the special survey App again Grrrrrrrrrrrv because the flippin battery went flat.
My boss is hopping mad and blames me !....I blame IT cos they installed it.
There must be somewhere we can install an App to that is non volatile and is not lost every time the battery goes flat.
Presumably the same place that WM2003 is installed ? How is it done ?
To install an app either:
1 - use Active Sync to install it if necessary
2 - if the install is a CAB file copy it to a memory card and then click it on the PPC to run the install.
As for the where it installs, when you run the installer it may ask where you wish to install, either Device/Storage Card. Make sure both batteries are charging. In all honesty it's not your fault that the end users aren't charging their Alpine on a regular basis.
Hello. I'm new to this forum and this is my first post. I just received my HTC Touch HD (T8285) yesterday and had some questions. So far, I had a chance to play with the phone for about 2 hours and I'm loving it. The phone is Telstra branded and has the Windows 6.1 software installed. I purchased the phone through eBay from a seller in Austrailia.
I did some research on these forums and read the dummy guide on how to Flash ROMs but I'm still a little confused. Now, I know there are other members of this forum who have also asked some of these questions but they appear to be in several different threads. I in hopes that one of you XDA Developers forum members can point me in the right direction.
The first thing I did was to check what SPL version I have. I hope I got that right. It appears that it's 1.15. I then followed the dummy guide and downloaded all of the necessary files for a USPL flash. I hope I got that right too.
Now I'm stuck at the point of which ROM to flash. I've seen forum members recommend Dutty's WM6.5 R7 M2.5 Thriller and Laurentius 26's THDV3.55_WWE_Ultimate ROM but I don't know which one to install. Does anyone have a recommendation on which one, either the two mentioned above or any others, would be the best ROM for me to flash? I'm looking for something that will tweak performance, improve the graphics, have new features not currently on the phone and also have little or no bugs as I use this phone everyday.
Also, what are the steps to flashing a ROM. I do not have a micro SD card in my phone at this time. I am planning on purchasing one but not anytime soon.
One last question, I have AT&T and I put my SIM card in. The phone says 3G AT&T on the home screen but I cannot access the internet through 3G. I get an error saying there's some connection issue. I clicked on Settings and it takes me to the Connections screen of the Settings window. There, it says "Telstra Internet" and the follows that up with "This connection is pre-configured. It cannot be modified." and below that it gives me the option for "My Work Network". I'm hoping that flashing the ROM will also help with this.
Any help is greatly appreciated.
Bakzoom
Bakzoom said:
Hello. I'm new to this forum and this is my first post. I just received my HTC Touch HD (T8285) yesterday and had some questions. So far, I had a chance to play with the phone for about 2 hours and I'm loving it. The phone is Telstra branded and has the Windows 6.1 software installed. I purchased the phone through eBay from a seller in Austrailia.
I did some research on these forums and read the dummy guide on how to Flash ROMs but I'm still a little confused. Now, I know there are other members of this forum who have also asked some of these questions but they appear to be in several different threads. I in hopes that one of you XDA Developers forum members can point me in the right direction.
The first thing I did was to check what SPL version I have. I hope I got that right. It appears that it's 1.15. I then followed the dummy guide and downloaded all of the necessary files for a USPL flash. I hope I got that right too.
Now I'm stuck at the point of which ROM to flash. I've seen forum members recommend Dutty's WM6.5 R7 M2.5 Thriller and Laurentius 26's THDV3.55_WWE_Ultimate ROM but I don't know which one to install. Does anyone have a recommendation on which one, either the two mentioned above or any others, would be the best ROM for me to flash? I'm looking for something that will tweak performance, improve the graphics, have new features not currently on the phone and also have little or no bugs as I use this phone everyday.
Also, what are the steps to flashing a ROM. I do not have a micro SD card in my phone at this time. I am planning on purchasing one but not anytime soon.
One last question, I have AT&T and I put my SIM card in. The phone says 3G AT&T on the home screen but I cannot access the internet through 3G. I get an error saying there's some connection issue. I clicked on Settings and it takes me to the Connections screen of the Settings window. There, it says "Telstra Internet" and the follows that up with "This connection is pre-configured. It cannot be modified." and below that it gives me the option for "My Work Network". I'm hoping that flashing the ROM will also help with this.
Any help is greatly appreciated.
Bakzoom
Click to expand...
Click to collapse
Welcome to XDA. I hope you enjoy your stay.
First off, to ask which rom would you recommend is an opinionated question and would create an endless amount of responses due to everyone having different likes & dislikes, thus creating a large thread. Due to this these sort of questions are frowned upon and are generally closed by moderators. As this is your first post, I'll forgive you this time and would ask you to read the forum rules before creating new threads.
Secondly, the steps to flashing a rom can be found here in this dummies guide. All you need can be found there. Any problems flashing, ask your questions in that thread and plenty of people including myself will help you if you get stuck along the way.
Thanks Fallen Spartan. I'll check out the link you provided and will follow the rules.
Bakzoom said:
Thanks Fallen Spartan. I'll check out the link you provided and will follow the rules.
Click to expand...
Click to collapse
No problems. Any issues you have try and post in relevant thread. If you cannot find a thread you also have choice to PM someone and ask for advice as well. My door is always open to anyone who needs it!
The reason you can't configure it, or connect to ATT's 3g is b/c you're running the Telstra rom, and Telstra has modified it so that you can't put other settings in it.
Technically...
There are ways around Telsta's machinations.
First....put the ATT 3g settings in the Work Connection, since you can't modify the other one.
Second you're going to have to modify a file in Opera, b/c opera is set up to be routed through Telstra's proxy.
This guide should pretty much tell you all the steps you're going to need.
And to fully experience the richness of your phone, you're going to need the sd card & fast. I do find it strange it didn't ship with one. Both my HD's (t8282 & t8285) did.
As for your last comment, once you flash the rom, (and it's generally better/safer to flash from the card...and glad you've chosen to go the route of uspl) you'll be able to put your settings where you please, and won't have the restrictions of the Telstra rom.
Thread closed
Dulicate post. Queries already answered in this thread. See posts 1277 & 1278