Phone call not disconnecting after call ended - PDA2, XDA IIi, 2020i General

Hi.
On quite a few XDA IIi i have been experiencing this problem. When a voice call has ended the duration of the call is still ticking up. Pressing the red button or the end call dosen't seem to end the call only performing a soft reset. Anyone had this problems and have found a work around?

Related

loud tone when pressing call end button

or any on screen buttons in the HTC dialer. anyone know how to get rid of it? its supppper annoying
A little more information would be helpful -
1. does this tone happen when you press a button while on a call?
2. if it does - does your other party hear it or only you?
3. what buttons does it happen on touch screen buttons or only the buttons on the front of the phone?
4. is this when you have speaker phone on or a headset or simply using the phone?
5. is it only when you hang up or any button at any time while on a call?
6. do the buttons make normal sounds when you are NOT on a call?
7. have you turned off sound on your buttons - have you at least tried this to see if it kills the problem?
Bill
when in the dialer go Menu->Options then Keypad: Off
ahh keypad tones off got rid of the annoying beep lol thanks! wish there was a way i keep the beep for the numeric keypad without the obnoxious beep that came out of the speakerphone part rather than the ear piece when backspace/ call history/ speed dial is pressed
jut realized it still makes the annoying noise when it connects to a call
i found that someone had my exact problem on a wings smartphone. they edited the registires in order to turn it off. i played arround with mine all day but no luck. here is the thread if anyone can apply it to a kaiser id be very greatful!
http://forum.xda-developers.com/showthread.php?t=356416

TyTn2 and Jawbone

I love this bluetooth headset. I was in a really noisy resturant, my friend could not even hear the noise on the other end. This jawbone has some serious noise cancelling technologies. Then I went into the bathroom where the music was insanely loud (mexican mariachi stuff) and still friend couldn't hear any music at all.
Weird but cool.
But when I press the button on my headset to hang up a call, it tries to open up the voice recorder/voice calling app on the tytn2. Very annoying.
Do any of you know how turn off this feature? I just want to stop the call. Thanks.
All I can say is that it isn't normal behavior...sorry.
I see that behavior all the time with 2 Jawbones, push button to end call, the call ends but voice dialer opens. I just keep quiet and it cancels itself, very irritating I agree.
RemE said:
I see that behavior all the time with 2 Jawbones, push button to end call, the call ends but voice dialer opens. I just keep quiet and it cancels itself, very irritating I agree.
Click to expand...
Click to collapse
Never heard of that problem. MAybe its the dialer or even the rom ur using to cause this problem? Have u tried a different rom with ur bluetooth? Also try to install a different dialer and see if that helps. My jawbone works perfect on my att tilt!
deeznuts said:
Never heard of that problem. MAybe its the dialer or even the rom ur using to cause this problem? Have u tried a different rom with ur bluetooth? Also try to install a different dialer and see if that helps. My jawbone works perfect on my att tilt!
Click to expand...
Click to collapse
You using stock ROM or custom ROM?
this happens to mine as well. From what I've observed, it seem like a delay of some sort when you press the button to hang up, and then the call has already hung up on the other end, and instead of hanging up the call, the phone will just turn on the voice dialer.
it is almost certainly what fakts13 posted as a cause. I've never seen mine launch the voice recorder when hanging up from a call.
It is exactly what fakts13 said. A single button press on the Jawbone can answer or hang up a phone call, but it will also activate voice dialing if no phone call is active. The only problem that you are experiencing is that your other caller is hanging up before you, so there is no active call whenever you press the button on your Jawbone. Since there is no active call, the button press launches Voice Dial on your TyTN II. You could always disable Voice Dial altogether if you never use it.

problem with ignore/reject incoming call

Is there a way to simply REJECT incoming call (caller hears 'busy' signal when i press red button)?
For now there's no difference between pressing end call hardware button, 'igore' software button, mute ring button and flipping the phone. Every action just mute ring, but DO NOT REJECT.
And I want to REJECT caller, when i want him to know that his call is not welcome in that moment.
Thx for help or tips how to make it work
press the hangup key?
The End Call hardware button definitely rejects. Does it not?
End call hardware button = hangup key = definitely NOT or maybe it's a matter of setting which i don't know where to look ;(
OK, just tried. I called myself from a different phone. The moment I press the hardware button I hear the busy signal...
ok, i tried too from 2 other phones - no busy signal - after pressing hardware button cannot do anything on Diamond, until other caller hangs off.
The moment of hangin off is thee moment when today screen backs.
strange... - settings maybe????
**********
OK, GOT IT!
Problem is in settings -> Phone -> Band
When set to auto - problem occurs
When manually set network type
red button really rejects.
Problem solved
But I still wonder why
I have exactly the same behaviour with my Diamond on Orange Switzerland Network. Changing the band settings to manual solved the problem! thanks for the tip!
But I'm wondering why too... :-/
Does not work here. (o2, Germany). If I get a call and press the reject button on screen the caller hears the message that the number is not availbale instead of a bussy signal.
Has someone a solution please cause this behavour is very confusing for the caller.
Thank you!
Solved the problem
I have set the wrong voice box number Now if someone calls me and I reject the call using the reject button the caller gets routed to my voicebox...
thanks........

Tilt cannot hear calls unless a soft reset or power button is pressed

We have a couple of Tilts and two are having the same issue, one more then the other.
Every so often when trying to make a call, it connects but the caller cannot hear anything. Sometimes if the power button is pressed the call can be heard. A soft reset also cures the problem for a while. Both are running 6.1
Mine has never been dropped, I am noth sure of the other user.
Any ideas?
Thanks,
Larry
Sounds like the NSIC (no sound in call) issue. There is a pretty lengthy thread on this and the prevailing wisdom is that this is caused my MS Voice Command, and no solution. You will fins, if this is the issue, that you can also fix it when it happens by going to settings and toggling VC off/on.

Problems disconnecting calls on Touch Diamond 2

After leaving a voicemail I am frequently unable to disconnect an outgoing call. The call end buttons (both hard and soft) leave the call connected. The only way to disconnect the call is to power off the phone. Has anyone else had this problem?

Categories

Resources